Organize KPrepublic, K.T.E.C, xiudi boards into directories (#12159)

* reset; redoing my steps; and recommit

* include xd002/.noci

12 files changed, 1364 insertions, 0 deletions

diff --git a/keyboards/kprepublic/cospad/config.h b/keyboards/kprepublic/cospad/config.h
new file mode 100644
index 0000000000..a18c2c1b25
--- /dev/null
+++ b/keyboards/kprepublic/cospad/config.h
@@ -0,0 +1,203 @@
+/*
+Copyright 2020
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4B5C // "KP"
+#define PRODUCT_ID      0xB1E5
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KPrepublic
+#define PRODUCT         Cospad
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+#define LED_NUM_LOCK_PIN B2
+#define LED_PIN_ON_STATE 0
+
+#define BACKLIGHT_PIN F7
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_ON_STATE 0
+
+#define RGB_DI_PIN F6
+#ifdef RGB_DI_PIN
+    #define RGBLED_NUM 4
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+    #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kprepublic/cospad/cospad.c b/keyboards/kprepublic/cospad/cospad.c
new file mode 100644
index 0000000000..e7772f2908
--- /dev/null
+++ b/keyboards/kprepublic/cospad/cospad.c
@@ -0,0 +1,16 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "cospad.h"
diff --git a/keyboards/kprepublic/cospad/cospad.h b/keyboards/kprepublic/cospad/cospad.h
new file mode 100644
index 0000000000..1e3b6c4276
--- /dev/null
+++ b/keyboards/kprepublic/cospad/cospad.h
@@ -0,0 +1,226 @@
+/* Copyright 2020
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+/* 6x4 ortholinear layout
+ * ,-------------------.
+ * | 00 | 01 | 02 | 03 |
+ * |----|----|----|----|
+ * | 10 | 11 | 12 | 13 |
+ * |----|----|----|----|
+ * | 20 | 21 | 22 | 23 |
+ * |----|----|----|----|
+ * | 30 | 31 | 32 | 33 |
+ * |----|----|----|----|
+ * | 40 | 41 | 42 | 43 |
+ * |----|----|----|----|
+ * | 50 | 51 | 52 | 53 |
+ * `-------------------'
+ */
+#define LAYOUT_ortho_6x4( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, k23, \
+    k30, k31, k32, k33, \
+    k40, k41, k42, k43, \
+    k50, k51, k52, k53 \
+) \
+{ \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, k23 }, \
+    { k30, k31, k32, k33 }, \
+    { k40, k41, k42, k43 }, \
+    { k50, k51, k52, k53 } \
+}
+
+/* 6x4 gamepad layout
+ * ,-------------------.
+ * | 00 | 01 | 02 | 03 |
+ * |----|----|----|----|
+ * | 10 | 11 | 12 | 13 |
+ * |----|----|----|----|
+ * | 20 | 21 | 22 |    |
+ * |----|----|----| 23 |
+ * | 30 | 31 | 32 |    |
+ * |----|----|----|----|
+ * | 40 | 41 | 42 | 43 |
+ * |----|----|----|----|
+ * | 50 | 51 | 52 | 53 |
+ * `-------------------'
+ */
+#define LAYOUT_gamepad_6x4( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, \
+    k30, k31, k32, k23, \
+    k40, k41, k42, k43, \
+    k50, k51, k52, k53  \
+) \
+{ \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, k23 }, \
+    { k30, k31, k32, ___ }, \
+    { k40, k41, k42, k43 }, \
+    { k50, k51, k52, k53 } \
+}
+
+/* 6x4 numpad layout
+ * ,-------------------.
+ * | 00 | 01 | 02 | 03 |
+ * |----|----|----|----|
+ * | 10 | 11 | 12 | 13 |
+ * |----|----|----|----|
+ * | 20 | 21 | 22 |    |
+ * |----|----|----| 23 |
+ * | 30 | 31 | 32 |    |
+ * |----|----|----|----|
+ * | 40 | 41 | 42 |    |
+ * |----|----|----| 43 |
+ * |    50   | 52 |    |
+ * `-------------------'
+ */
+#define LAYOUT_numpad_6x4( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, \
+    k30, k31, k32, k23, \
+    k40, k41, k42, \
+    k50,      k52, k43 \
+) \
+{ \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, k23 }, \
+    { k30, k31, k32, ___ }, \
+    { k40, k41, k42, k43 }, \
+    { k50, ___, k52, ___ } \
+}
+
+/* 6x4 numpad layout with split Plus
+ * ,-------------------.
+ * | 00 | 01 | 02 | 03 |
+ * |----|----|----|----|
+ * | 10 | 11 | 12 | 13 |
+ * |----|----|----|----|
+ * | 20 | 21 | 22 | 23 |
+ * |----|----|----|----|
+ * | 30 | 31 | 32 | 33 |
+ * |----|----|----|----|
+ * | 40 | 41 | 42 |    |
+ * |----|----|----| 43 |
+ * |    50   | 52 |    |
+ * `-------------------'
+ */
+#define LAYOUT_numpad_6x4_split_plus( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, k23, \
+    k30, k31, k32, k33, \
+    k40, k41, k42, \
+    k50,      k52, k43 \
+) \
+{ \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, k23 }, \
+    { k30, k31, k32, k33 }, \
+    { k40, k41, k42, k43 }, \
+    { k50, ___, k52, ___ } \
+}
+
+/* 6x4 numpad with split Plus and 0 keys
+ * ,-------------------.
+ * | 00 | 01 | 02 | 03 |
+ * |----|----|----|----|
+ * | 10 | 11 | 12 | 13 |
+ * |----|----|----|----|
+ * | 20 | 21 | 22 | 23 |
+ * |----|----|----|----|
+ * | 30 | 31 | 32 | 33 |
+ * |----|----|----|----|
+ * | 40 | 41 | 42 |    |
+ * |----|----|----| 43 |
+ * | 50 | 51 | 52 |    |
+ * `-------------------'
+ */
+#define LAYOUT_numpad_6x4_split_plus_zero( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, k23, \
+    k30, k31, k32, k33, \
+    k40, k41, k42, \
+    k50, k51, k52, k43 \
+) \
+{ \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, k23 }, \
+    { k30, k31, k32, k33 }, \
+    { k40, k41, k42, k43 }, \
+    { k50, k51, k52, ___ } \
+}
+
+/* 6x4 numpad with split 0 key
+ * ,-------------------.
+ * | 00 | 01 | 02 | 03 |
+ * |----|----|----|----|
+ * | 10 | 11 | 12 | 13 |
+ * |----|----|----|----|
+ * | 20 | 21 | 22 |    |
+ * |----|----|----| 23 |
+ * | 30 | 31 | 32 |    |
+ * |----|----|----|----|
+ * | 40 | 41 | 42 |    |
+ * |----|----|----| 43 |
+ * | 50 | 51 | 52 |    |
+ * `-------------------'
+ */
+#define LAYOUT_numpad_6x4_split_zero( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, \
+    k30, k31, k32, k23, \
+    k40, k41, k42, \
+    k50, k51, k52, k43 \
+) \
+{ \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, k23 }, \
+    { k30, k31, k32, ___ }, \
+    { k40, k41, k42, k43 }, \
+    { k50, k51, k52, ___ } \
+}
+// Add backwards compatibility for existing keymaps
+#define cospad_bl_led_on   backlight_enable
+#define cospad_bl_led_off  backlight_disable
+#define cospad_bl_led_togg backlight_toggle
diff --git a/keyboards/kprepublic/cospad/info.json b/keyboards/kprepublic/cospad/info.json
new file mode 100644
index 0000000000..f962cd0d54
--- /dev/null
+++ b/keyboards/kprepublic/cospad/info.json
@@ -0,0 +1,198 @@
+{
+    "keyboard_name": "Cospad",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 4,
+    "height": 6,
+    "layouts": {
+        "LAYOUT_ortho_6x4": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+                {"x":3, "y":4},
+
+                {"x":0, "y":5},
+                {"x":1, "y":5},
+                {"x":2, "y":5},
+                {"x":3, "y":5}
+            ]
+        },
+        "LAYOUT_gamepad_6x4": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":2, "h":2},
+
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+                {"x":3, "y":4},
+
+                {"x":0, "y":5},
+                {"x":1, "y":5},
+                {"x":2, "y":5},
+                {"x":3, "y":5}
+            ]
+        },
+        "LAYOUT_numpad_6x4": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":2, "h":2},
+
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+
+                {"x":0, "y":5, "w":2},
+                {"x":2, "y":5},
+                {"x":3, "y":4, "h":2}
+            ]
+        },
+        "LAYOUT_numpad_6x4_split_plus": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+
+                {"x":0, "y":5, "w":2},
+                {"x":2, "y":5},
+                {"x":3, "y":4, "h":2}
+            ]
+        },
+        "LAYOUT_numpad_6x4_split_plus_zero": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+
+                {"x":0, "y":5},
+                {"x":1, "y":5},
+                {"x":2, "y":5},
+                {"x":3, "y":4, "h":2}
+            ]
+        },
+        "LAYOUT_numpad_6x4_split_zero": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":2, "h":2},
+
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+
+                {"x":0, "y":5},
+                {"x":1, "y":5},
+                {"x":2, "y":5},
+                {"x":3, "y":4, "h":2}
+            ]
+        }
+    }
+}
diff --git a/keyboards/kprepublic/cospad/keymaps/default/keymap.c b/keyboards/kprepublic/cospad/keymaps/default/keymap.c
new file mode 100644
index 0000000000..06b06d41f9
--- /dev/null
+++ b/keyboards/kprepublic/cospad/keymaps/default/keymap.c
@@ -0,0 +1,57 @@
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BL,
+    _FL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Keymap _BL: (Base Layer) Default Layer
+     * ,-------------------.
+     * |Esc |TAB | FN | BS |
+     * |----|----|----|----|
+     * | NL | /  | *  | -  |
+     * |----|----|----|----|
+     * | 7  | 8  | 9  |    |
+     * |----|----|----| +  |
+     * | 4  | 5  | 6  |    |
+     * |----|----|----|----|
+     * | 1  | 2  | 3  |    |
+     * |----|----|----| En |
+     * |   0     | .  |    |
+     * `-------------------'
+     */
+    [_BL] = LAYOUT_numpad_6x4(
+        KC_ESC,  KC_TAB,  MO(_FL), KC_BSPC,
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,
+        KC_P0,            KC_PDOT, KC_PENT
+    ),
+
+    /* Keymap _FL: Function Layer
+     * ,-------------------.
+     * |RGBT|    |    |    |
+     * |----|----|----|----|
+     * |RGBM|RGBP|BTOG|    |
+     * |----|----|----|----|
+     * |HUD |HUI |BON |    |
+     * |----|----|----|    |
+     * |SAD |SAI |BOFF|    |
+     * |----|----|----|----|
+     * |VAD |VAS |BSTP|    |
+     * |----|----|----|    |
+     * |         |RST |    |
+     * `-------------------'
+    */
+    [_FL] = LAYOUT_numpad_6x4(
+        RGB_TOG, _______, _______, _______,
+        RGB_MOD, RGB_M_P, BL_TOGG, _______,
+        RGB_HUD, RGB_HUI, BL_ON,
+        RGB_SAD, RGB_SAI, BL_OFF,  _______,
+        RGB_VAD, RGB_VAI, BL_STEP,
+        _______,          RESET,   _______
+    )
+};
diff --git a/keyboards/kprepublic/cospad/keymaps/detrus/keymap.c b/keyboards/kprepublic/cospad/keymaps/detrus/keymap.c
new file mode 100644
index 0000000000..af56305e5c
--- /dev/null
+++ b/keyboards/kprepublic/cospad/keymaps/detrus/keymap.c
@@ -0,0 +1,367 @@
+#include QMK_KEYBOARD_H
+#include "led.h"
+#include <print.h>
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+enum cospad_layers {
+	_QWERTY_LAYER,
+	_QWERTZ_LAYER,
+	_COLEMA_LAYER,
+	_DVORAK_LAYER,
+	_QWERTY_LOWER_LAYER,
+	_QWERTZ_LOWER_LAYER,
+	_COLEMA_LOWER_LAYER,
+	_DVORAK_LOWER_LAYER,
+	_RAISE_LAYER,
+	_ALTER_LAYER,
+};
+
+// To switch the default layer used for the layout, there are special keycodes.
+// Which onces detected below serve to switch it.
+enum cospad_keycodes {
+	QWERTY = SAFE_RANGE,
+	QWERTZ,
+	COLEMAK,
+	DVORAK
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	/* Keymap _QWERTY_LAYER: Default layer
+	 * ,-----------------------.
+	 * |  T  |  G  |  B  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  R  |  F  |  V  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  E  |  D  |  C  |     |
+	 * |-----|-----|-----| Spc |
+	 * |  W  |  S  |  X  |     |
+	 * |-----|-----|-----|-----|
+	 * |  Q  |  A  |  Z  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 *
+	 *   And it's LOWER layer
+	 * ,-----------------------.
+	 * |  P  |  ;  |  /  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  O  |  L  |  .  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  I  |  K  |  ,  |     |
+	 * |-----|-----|-----| Ent |
+	 * |  U  |  J  |  M  |     |
+	 * |-----|-----|-----|-----|
+	 * |  Y  |  H  |  N  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 */
+	[_QWERTY_LAYER] = LAYOUT_gamepad_6x4(
+			KC_T,    KC_G,    KC_B,    KC_LALT,  \
+			KC_R,    KC_F,    KC_V,    MO(_QWERTY_LOWER_LAYER),\
+			KC_E,    KC_D,    KC_C,              \
+			KC_W,    KC_S,    KC_X,    KC_SPACE, \
+			KC_Q,    KC_A,    KC_Z,    MO(_RAISE_LAYER),\
+			KC_GESC, KC_TAB,  KC_LSFT, KC_LCTRL),
+	[_QWERTY_LOWER_LAYER] = LAYOUT_gamepad_6x4(
+			KC_P,    KC_SCLN, KC_SLSH, KC_LALT,  \
+			KC_O,    KC_L,    KC_DOT,  _______,  \
+			KC_I,    KC_K,    KC_COMM,           \
+			KC_U,    KC_J,    KC_M,    KC_ENTER, \
+			KC_Y,    KC_H,    KC_N,    _______,  \
+			_______, _______,  _______, _______),
+
+
+
+	/* Keymap _QWERTZ_LAYER: Alternate default layer
+	 * ,-----------------------.
+	 * |  T  |  G  |  B  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  R  |  F  |  V  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  E  |  D  |  C  |     |
+	 * |-----|-----|-----| Spc |
+	 * |  W  |  S  |  X  |     |
+	 * |-----|-----|-----|-----|
+	 * |  Q  |  A  |  Y  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 *
+	 *   And it's LOWER layer
+	 * ,-----------------------.
+	 * |  P  |  ;  |  /  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  O  |  L  |  >  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  I  |  K  |  <  |     |
+	 * |-----|-----|-----| Ent |
+	 * |  U  |  J  |  M  |     |
+	 * |-----|-----|-----|-----|
+	 * |  Z  |  H  |  N  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 */
+	[_QWERTZ_LAYER] = LAYOUT_gamepad_6x4(
+			KC_T,    KC_G,    KC_B,    KC_LALT,  \
+			KC_R,    KC_F,    KC_V,    MO(_QWERTZ_LOWER_LAYER),\
+			KC_E,    KC_D,    KC_C,              \
+			KC_W,    KC_S,    KC_X,    KC_SPACE, \
+			KC_Q,    KC_A,    KC_Y,    MO(_RAISE_LAYER),\
+			KC_GESC, KC_TAB,  KC_LSFT, KC_LCTRL),
+	[_QWERTZ_LOWER_LAYER] = LAYOUT_gamepad_6x4(
+			KC_P,    KC_SCLN, KC_SLSH, KC_LALT,  \
+			KC_O,    KC_L,    KC_DOT,  _______,  \
+			KC_I,    KC_K,    KC_COMM,           \
+			KC_U,    KC_J,    KC_M,    KC_ENTER, \
+			KC_Z,    KC_H,    KC_N,    _______,  \
+			_______, _______, _______, _______),
+
+
+
+	/* Keymap _COLEMA_LAYER: Alternate default layer
+	 * ,-----------------------.
+	 * |  G  |  D  |  B  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  P  |  T  |  V  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  F  |  S  |  C  |     |
+	 * |-----|-----|-----| Spc |
+	 * |  W  |  R  |  X  |     |
+	 * |-----|-----|-----|-----|
+	 * |  Q  |  A  |  Z  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 *
+	 *   And it's LOWER layer
+	 * ,-----------------------.
+	 * |  ;  |  O  |  /  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  Y  |  I  |  .  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  U  |  E  |  ,  |     |
+	 * |-----|-----|-----| Ent |
+	 * |  L  |  N  |  M  |     |
+	 * |-----|-----|-----|-----|
+	 * |  J  |  H  |  K  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 */
+	[_COLEMA_LAYER] = LAYOUT_gamepad_6x4(
+			KC_T,    KC_D,     KC_B,    KC_LALT,  \
+			KC_R,    KC_T,     KC_V,    MO(_COLEMA_LOWER_LAYER),\
+			KC_E,    KC_S,     KC_C,              \
+			KC_W,    KC_R,     KC_X,    KC_SPACE, \
+			KC_Q,    KC_A,     KC_Z,    MO(_RAISE_LAYER),\
+			KC_GESC, KC_TAB,   KC_LSFT, KC_LCTRL),
+	[_COLEMA_LOWER_LAYER] = LAYOUT_gamepad_6x4(
+			KC_SCLN, KC_O,     KC_SLSH, _______,  \
+			KC_Y,    KC_I,     KC_DOT,  _______,  \
+			KC_U,    KC_E,     KC_COMM,           \
+			KC_L,    KC_N,     KC_M,    KC_ENTER, \
+			KC_J,    KC_H,     KC_K,    _______,  \
+			KC_F,    KC_G,     _______, _______),
+
+
+
+	/* Keymap _DVORAK_LAYER: Alternate default layer
+	 * ,-----------------------.
+	 * |  Y  |  I  |  X  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  P  |  U  |  K  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  .  |  E  |  J  |     |
+	 * |-----|-----|-----| Spc |
+	 * |  ,  |  O  |  Q  |     |
+	 * |-----|-----|-----|-----|
+	 * |  '  |  A  |  ;  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 *
+	 *   And it's LOWER layer
+	 * ,-----------------------.
+	 * |  L  |  S  |  Z  | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  R  |  N  |  V  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  C  |  T  |  W  |     |
+	 * |-----|-----|-----| Ent |
+	 * |  G  |  H  |  M  |     |
+	 * |-----|-----|-----|-----|
+	 * |  F  |  D  |  B  | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 */
+	[_DVORAK_LAYER] = LAYOUT_gamepad_6x4(
+			KC_Y,    KC_I,    KC_X,    KC_LALT,   \
+			KC_P,    KC_U,    KC_K,    MO(_DVORAK_LOWER_LAYER),\
+			KC_DOT,  KC_E,    KC_J,               \
+			KC_COMM, KC_O,    KC_A,    KC_SPACE,  \
+			KC_QUOT, KC_A,    KC_SCLN, MO(_RAISE_LAYER),\
+			KC_GESC, KC_TAB,  KC_LSFT, KC_LCTRL),
+	[_DVORAK_LOWER_LAYER] = LAYOUT_gamepad_6x4(
+			KC_L,    KC_S,    KC_Z,    KC_LALT, \
+			KC_R,    KC_N,    KC_V,    _______, \
+			KC_C,    KC_T,    KC_W,             \
+			KC_G,    KC_H,    KC_M,    KC_ENTER,\
+			KC_F,    KC_D,    KC_B,    _______, \
+			_______, _______, _______, _______),
+
+
+
+	/* Keymap _RAISE_LAYER: Additional layer to access more
+	 * ,-----------------------.
+	 * |  5  |  0  | del | Alt |
+	 * |-----|-----|-----|-----|
+	 * |  4  |  9  | ->  | LOW |
+	 * |-----|-----|-----|-----|
+	 * |  3  |  8  |  <- |     |
+	 * |-----|-----|-----| Spc |
+	 * |  2  |  7  | ->  |     |
+	 * |-----|-----|-----|-----|
+	 * |  1  |  6  |  <- | RAI |
+	 * |-----|-----|-----|-----|
+	 * | Esc | Tab | Sft | Ctl |
+	 * `-----------------------'
+	 */
+	[_RAISE_LAYER] = LAYOUT_gamepad_6x4(
+			KC_5,    KC_0,   KC_BSPC,  _______, \
+			KC_4,    KC_9,   KC_RIGHT, _______, \
+			KC_3,    KC_8,   KC_UP,             \
+			KC_2,    KC_7,   KC_DOWN,  _______, \
+			KC_1,    KC_6,   KC_LEFT,  _______, \
+			_______, _______, _______, _______),
+
+
+
+	/* Keymap _ALTER_LAYER: Function layer used to control the Leds
+	 *                     and use media buttons
+	 * ,----------------------------------------.
+	 * | Val Dec | Bl Toggle  | Qwertz  | Super |
+	 * |---------|------------|---------|-------|
+	 * | Val Inc |   Bl Off   | Qwerty  |       |
+	 * |---------|------------|---------|-------|
+	 * | Sat Dec |   Bl On    | Colemak |       |
+	 * |---------|------------|---------|       |
+	 * | Sat Inc | RGB Toggle | Dvorak  |       |
+	 * |---------|------------|---------|-------|
+	 * | Hue Dec |  RGB Next  | Vol Dwn |       |
+	 * |---------|------------|---------|-------|
+	 * | Hue Inc |  RGB Prev  | Vol Up  | Reset |
+	 * `----------------------------------------'
+	 */
+	[_ALTER_LAYER] = LAYOUT_gamepad_6x4(
+			RGB_VAD, BL_TOGG,  QWERTZ,  KC_LGUI, \
+			RGB_VAI, BL_OFF,   QWERTY,  _______, \
+			RGB_SAD, BL_ON,    COLEMAK,          \
+			RGB_SAI, RGB_TOG,  DVORAK,  _______, \
+			RGB_HUD, RGB_MOD,  KC_VOLD, _______, \
+			RGB_HUI, RGB_RMOD, KC_VOLU, RESET),
+};
+
+// Makes sure to update the good tri-layer if a layer changes
+layer_state_t layer_state_set_user(layer_state_t state) {
+	switch (biton32(default_layer_state)) {
+		case _QWERTY_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER);
+			break;
+		case _QWERTZ_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER);
+			break;
+		case _COLEMA_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER);
+			break;
+		case _DVORAK_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER);
+			break;
+	}
+	return state;
+}
+
+// Makes the tri-layer
+uint32_t default_layer_state_set_kb(uint32_t state) {
+	switch (biton32(state)) {
+		case _QWERTY_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER);
+			layer_move(_QWERTY_LAYER);
+			break;
+		case _QWERTZ_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER);
+			layer_move(_QWERTZ_LAYER);
+			break;
+		case _COLEMA_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _DVORAK_LOWER_LAYER, _ALTER_LAYER);
+			layer_move(_COLEMA_LAYER);
+			break;
+		case _DVORAK_LAYER:
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTY_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _QWERTZ_LOWER_LAYER, _ALTER_LAYER);
+			state = update_tri_layer_state(state, _RAISE_LAYER, _COLEMA_LOWER_LAYER, _ALTER_LAYER);
+			layer_move(_DVORAK_LAYER);
+			break;
+	}
+	return state;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	switch (keycode) {
+		case BL_TOGG:
+			if (record->event.pressed) {
+				cospad_bl_led_togg();
+			}
+			return false;
+		case BL_ON:
+			if (record->event.pressed) {
+				cospad_bl_led_on();
+			}
+			return false;
+		case BL_OFF:
+			if (record->event.pressed) {
+				cospad_bl_led_off();
+			}
+			return false;
+		case QWERTY:
+			if (record->event.pressed) {
+				set_single_persistent_default_layer(_QWERTY_LAYER);
+				print("switched to QWERTY layout\n");
+			}
+			return false;
+			break;
+		case QWERTZ:
+			if (record->event.pressed) {
+				set_single_persistent_default_layer(_QWERTZ_LAYER);
+			}
+			return false;
+			break;
+		case COLEMAK:
+			if (record->event.pressed) {
+				set_single_persistent_default_layer(_COLEMA_LAYER);
+			}
+			return false;
+			break;
+		case DVORAK:
+			if (record->event.pressed) {
+				set_single_persistent_default_layer(_DVORAK_LAYER);
+			}
+			return false;
+			break;
+		default:
+			return true;
+	}
+}
diff --git a/keyboards/kprepublic/cospad/keymaps/split_plus_and_zero/keymap.c b/keyboards/kprepublic/cospad/keymaps/split_plus_and_zero/keymap.c
new file mode 100644
index 0000000000..dd2ff00cd1
--- /dev/null
+++ b/keyboards/kprepublic/cospad/keymaps/split_plus_and_zero/keymap.c
@@ -0,0 +1,81 @@
+#include QMK_KEYBOARD_H
+
+/* 
+ *  This keymap is based on the default keymap for the cospad.
+ *  It was adapted for the split Plus and split 0 layout focusing on the "00" key.
+ */
+
+enum custom_keycodes {
+  DBL_ZRO = SAFE_RANGE,
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case DBL_ZRO:
+      if (record->event.pressed) {
+        // when keycode DBL_ZRO is pressed
+        SEND_STRING("00");
+      } else {
+        // when keycode DBL_ZRO is released
+      }
+      break;
+
+  }
+  return true;
+};
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BL,
+    _FL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Keymap _BL: (Base Layer) Default Layer
+     * ,-------------------.
+     * |Esc |TAB | FN | BS |
+     * |----|----|----|----|
+     * | NL | /  | *  | -  |
+     * |----|----|----|----|
+     * | 7  | 8  | 9  | ~  |
+     * |----|----|----|----|
+     * | 4  | 5  | 6  | +  |
+     * |----|----|----|----|
+     * | 1  | 2  | 3  |    |
+     * |----|----|----| En |
+     * | 0  | 00 | .  |    |
+     * `-------------------'
+     */
+    [_BL] = LAYOUT_numpad_6x4_split_plus_zero(
+        KC_ESC,  KC_TAB,  MO(_FL), KC_BSPC,
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,   KC_TILD,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,
+        KC_P0,   DBL_ZRO, KC_PDOT, KC_PENT
+    ),
+        
+    /* Keymap _FL: Function Layer
+     * ,-------------------.
+     * |RGBT|    |    |    |
+     * |----|----|----|----|
+     * |RGBM|RGBP|BTOG|    |
+     * |----|----|----|----|
+     * |HUD |HUI |BON |    |
+     * |----|----|----|----|
+     * |SAD |SAI |BOFF|    |
+     * |----|----|----|----|
+     * |VAD |VAS |BSTP|    |
+     * |----|----|----|    |
+     * |    |    |RST |    |
+     * `-------------------'
+    */
+    [_FL] = LAYOUT_numpad_6x4_split_plus_zero(
+        RGB_TOG, _______, _______, _______,
+        RGB_MOD, RGB_M_P, BL_TOGG, _______,
+        RGB_HUD, RGB_HUI, BL_ON,   _______,
+        RGB_SAD, RGB_SAI, BL_OFF,  _______,
+        RGB_VAD, RGB_VAI, BL_STEP,
+        _______, _______, RESET,   _______
+    )
+};
diff --git a/keyboards/kprepublic/cospad/keymaps/split_zero/keymap.c b/keyboards/kprepublic/cospad/keymaps/split_zero/keymap.c
new file mode 100644
index 0000000000..3a0c7d6e4e
--- /dev/null
+++ b/keyboards/kprepublic/cospad/keymaps/split_zero/keymap.c
@@ -0,0 +1,81 @@
+#include QMK_KEYBOARD_H
+
+/* 
+ *  This keymap is based on the default keymap for the cospad.
+ *  It was adapted for the split 0 layout focusing on the "00" key.
+ */
+
+enum custom_keycodes {
+  DBL_ZRO = SAFE_RANGE,
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case DBL_ZRO:
+      if (record->event.pressed) {
+        // when keycode DBL_ZRO is pressed
+        SEND_STRING("00");
+      } else {
+        // when keycode DBL_ZRO is released
+      }
+      break;
+
+  }
+  return true;
+};
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BL,
+    _FL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Keymap _BL: (Base Layer) Default Layer
+     * ,-------------------.
+     * |Esc |TAB | FN | BS |
+     * |----|----|----|----|
+     * | NL | /  | *  | -  |
+     * |----|----|----|----|
+     * | 7  | 8  | 9  |    |
+     * |----|----|----| +  |
+     * | 4  | 5  | 6  |    |
+     * |----|----|----|----|
+     * | 1  | 2  | 3  |    |
+     * |----|----|----| En |
+     * | 0  | 00 | .  |    |
+     * `-------------------'
+     */
+    [_BL] = LAYOUT_numpad_6x4_split_zero(
+        KC_ESC,  KC_TAB,  MO(_FL), KC_BSPC,
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,
+        KC_P0,   DBL_ZRO, KC_PDOT, KC_PENT
+    ),
+        
+    /* Keymap _FL: Function Layer
+     * ,-------------------.
+     * |RGBT|    |    |    |
+     * |----|----|----|----|
+     * |RGBM|RGBP|BTOG|    |
+     * |----|----|----|----|
+     * |HUD |HUI |BON |    |
+     * |----|----|----|    |
+     * |SAD |SAI |BOFF|    |
+     * |----|----|----|----|
+     * |VAD |VAS |BSTP|    |
+     * |----|----|----|    |
+     * |    |    |RST |    |
+     * `-------------------'
+    */
+    [_FL] = LAYOUT_numpad_6x4_split_zero(
+        RGB_TOG, _______, _______, _______,
+        RGB_MOD, RGB_M_P, BL_TOGG, _______,
+        RGB_HUD, RGB_HUI, BL_ON,
+        RGB_SAD, RGB_SAI, BL_OFF,  _______,
+        RGB_VAD, RGB_VAI, BL_STEP,
+        _______, _______, RESET,   _______
+    )
+};
diff --git a/keyboards/kprepublic/cospad/keymaps/via/keymap.c b/keyboards/kprepublic/cospad/keymaps/via/keymap.c
new file mode 100644
index 0000000000..f8611c02d7
--- /dev/null
+++ b/keyboards/kprepublic/cospad/keymaps/via/keymap.c
@@ -0,0 +1,85 @@
+/* Copyright 2020 Team Mechlovin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+ #include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Keymap _BL: (Base Layer) Default Layer
+     * ,-------------------.
+     * |Esc |TAB | FN | BS |
+     * |----|----|----|----|
+     * | NL | /  | *  | -  |
+     * |----|----|----|----|
+     * | 7  | 8  | 9  |    |
+     * |----|----|----| +  |
+     * | 4  | 5  | 6  |    |
+     * |----|----|----|----|
+     * | 1  | 2  | 3  |    |
+     * |----|----|----| En |
+     * |   0     | .  |    |
+     * `-------------------'
+     */
+    [0] = LAYOUT_numpad_6x4(
+        KC_ESC,  KC_TAB,  MO(1),   KC_BSPC,
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,
+        KC_P0,            KC_PDOT, KC_PENT
+    ),
+
+    /* Keymap _FL: Function Layer
+     * ,-------------------.
+     * |RGBT|    |    |    |
+     * |----|----|----|----|
+     * |RGBM|RGBP|BTOG|    |
+     * |----|----|----|----|
+     * |HUD |HUI |BON |    |
+     * |----|----|----|    |
+     * |SAD |SAI |BOFF|    |
+     * |----|----|----|----|
+     * |VAD |VAS |BSTP|    |
+     * |----|----|----|    |
+     * |         |RST |    |
+     * `-------------------'
+    */
+    [1] = LAYOUT_numpad_6x4(
+        RGB_TOG, _______, _______, _______,
+        RGB_MOD, RGB_M_P, BL_TOGG, _______,
+        RGB_HUD, RGB_HUI, BL_ON,
+        RGB_SAD, RGB_SAI, BL_OFF,  _______,
+        RGB_VAD, RGB_VAI, BL_STEP,
+        _______,          RESET,   _______
+    ),
+
+    [2] = LAYOUT_numpad_6x4(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS,          KC_TRNS, KC_TRNS
+    ),
+    
+    [3] = LAYOUT_numpad_6x4(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS,          KC_TRNS, KC_TRNS
+    )
+};
diff --git a/keyboards/kprepublic/cospad/keymaps/via/rules.mk b/keyboards/kprepublic/cospad/keymaps/via/rules.mk
new file mode 100644
index 0000000000..036bd6d1c3
--- /dev/null
+++ b/keyboards/kprepublic/cospad/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
\ No newline at end of file
diff --git a/keyboards/kprepublic/cospad/readme.md b/keyboards/kprepublic/cospad/readme.md
new file mode 100644
index 0000000000..9bb3dfdc0e
--- /dev/null
+++ b/keyboards/kprepublic/cospad/readme.md
@@ -0,0 +1,18 @@
+# Cospad
+
+A DIY keypad kit sold by KPRepublic, runs TKG natively.
+
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: Cospad PCB
+* Hardware Availability: [KPrepublic on Aliexpress](https://aliexpress.com/item/cospad-Custom-Mechanical-Keyboard-Kit-up-tp-24-keys-Supports-TKG-TOOLS-Underglow-RGB-PCB-20/32818383873.html)
+
+Supported Layouts:
+
+![Numpad layouts](https://i.imgur.com/t03lXJ4.png)
+![Ortholinear layouts](https://i.imgur.com/mliUcCc.png)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cospad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kprepublic/cospad/rules.mk b/keyboards/kprepublic/cospad/rules.mk
new file mode 100644
index 0000000000..7f464d7ac3
--- /dev/null
+++ b/keyboards/kprepublic/cospad/rules.mk
@@ -0,0 +1,31 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+
+LAYOUTS = numpad_6x4 ortho_6x4