diff options
Diffstat (limited to 'quantum/template/ps2avrgb/config.h')
| -rw-r--r-- | quantum/template/ps2avrgb/config.h | 122 |
1 files changed, 103 insertions, 19 deletions
diff --git a/quantum/template/ps2avrgb/config.h b/quantum/template/ps2avrgb/config.h index 3f3fd5fd76..126afbcbd7 100644 --- a/quantum/template/ps2avrgb/config.h +++ b/quantum/template/ps2avrgb/config.h @@ -19,37 +19,121 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422D -#define DEVICE_VER 0x0001 +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 #define MANUFACTURER %YOUR_NAME% -#define PRODUCT %KEYBOARD% -#define DESCRIPTION A custom keyboard - -#define RGBLED_NUM 16 +#define PRODUCT %KEYBOARD% +#define DESCRIPTION A custom keyboard +/* key matrix size */ #define MATRIX_ROWS 8 -#define MATRIX_COLS 11 +#define MATRIX_COLS 15 +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ #define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } -#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5 } -// #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1, C0, D7 } -#define UNUSED_PINS {} +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } +#define UNUSED_PINS +/* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGBLED_NUM 16 +//#define RGBLIGHT_HUE_STEP 8 +//#define RGBLIGHT_SAT_STEP 8 +//#define RGBLIGHT_VAL_STEP 8 +//#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//#define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//#define RGBLIGHT_EFFECT_BREATHING +//#define RGBLIGHT_EFFECT_RAINBOW_MOOD +//#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//#define RGBLIGHT_EFFECT_SNAKE +//#define RGBLIGHT_EFFECT_KNIGHT +//#define RGBLIGHT_EFFECT_CHRISTMAS +//#define RGBLIGHT_EFFECT_STATIC_GRADIENT +//#define RGBLIGHT_EFFECT_RGB_TEST +//#define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 -#define BACKLIGHT_LEVELS 1 -#define RGBLIGHT_ANIMATIONS +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT /* disable these deprecated features by default */ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - /* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 |