summaryrefslogtreecommitdiff
path: root/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox')
-rw-r--r--keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/board_ST7565.h127
-rw-r--r--keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/driver.mk2
-rw-r--r--keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c292
-rw-r--r--keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_config.h26
-rw-r--r--keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/st7565.h37
5 files changed, 0 insertions, 484 deletions
diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/board_ST7565.h
deleted file mode 100644
index 290571ce5b..0000000000
--- a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/board_ST7565.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-#include "print.h"
-
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6
-#define ST7565_ADC ST7565_ADC_NORMAL
-#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER 0,1,2,3
-/*
- * Custom page order for several LCD boards, e.g. HEM12864-99
- * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3
- */
-
-#define ST7565_GPIOPORT GPIOC
-#define ST7565_PORT PORTC
-#define ST7565_A0_PIN 7
-#define ST7565_RST_PIN 8
-#define ST7565_MOSI_PIN 6
-#define ST7565_SLCK_PIN 5
-#define ST7565_SS_PIN 4
-
-#define palSetPadModeRaw(portname, bits) \
- ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
-
-#define palSetPadModeNamed(portname, portmode) \
- palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
-
-#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
-// DSPI Clock and Transfer Attributes
-// Frame Size: 8 bits
-// MSB First
-// CLK Low by default
-static const SPIConfig spi1config = {
- NULL,
- /* HW dependent part.*/
- ST7565_GPIOPORT,
- ST7565_SS_PIN,
- SPIx_CTARn_FMSZ(7)
- | SPIx_CTARn_ASC(7)
- | SPIx_CTARn_DT(7)
- | SPIx_CTARn_CSSCK(7)
- | SPIx_CTARn_PBR(0)
- | SPIx_CTARn_BR(7)
- //SPI_CR1_BR_0
-};
-
-static bool_t st7565_is_data_mode = 1;
-
-static GFXINLINE void init_board(GDisplay *g) {
- (void) g;
- palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
- st7565_is_data_mode = 1;
- palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
- palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
- palSetPadModeRaw(SS, ST7565_SPI_MODE);
-
- spiInit();
- spiStart(&SPID1, &spi1config);
- spiSelect(&SPID1);
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
- (void) g;
-}
-
-static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
- (void) g;
- if (state) {
- palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- }
- else {
- palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- }
-}
-
-static GFXINLINE void acquire_bus(GDisplay *g) {
- (void) g;
- // Only the LCD is using the SPI bus, so no need to acquire
- // spiAcquireBus(&SPID1);
-}
-
-static GFXINLINE void release_bus(GDisplay *g) {
- (void) g;
- // Only the LCD is using the SPI bus, so no need to release
- //spiReleaseBus(&SPID1);
-}
-
-static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) {
- (void) g;
- if (st7565_is_data_mode) {
- // The sleeps need to be at lest 10 vs 25 ns respectively
- // So let's sleep two ticks, one tick might not be enough
- // if we are at the end of the tick
- chThdSleep(2);
- palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
- chThdSleep(2);
- st7565_is_data_mode = 0;
- }
- spiSend(&SPID1, 1, &cmd);
-}
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
- (void) g;
- if (!st7565_is_data_mode) {
- // The sleeps need to be at lest 10 vs 25 ns respectively
- // So let's sleep two ticks, one tick might not be enough
- // if we are at the end of the tick
- chThdSleep(2);
- palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
- chThdSleep(2);
- st7565_is_data_mode = 1;
- }
- spiSend(&SPID1, length, data);
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/driver.mk
deleted file mode 100644
index 889a1a0317..0000000000
--- a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/driver.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/st7565ergodox
-GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
deleted file mode 100644
index c33aea81a8..0000000000
--- a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT GDISPVMT_ST7565_ERGODOX
-#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_ST7565.h"
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
- #define GDISP_SCREEN_HEIGHT 32
-#endif
-#ifndef GDISP_SCREEN_WIDTH
- #define GDISP_SCREEN_WIDTH 128
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
- #define GDISP_INITIAL_CONTRAST 0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
- #define GDISP_INITIAL_BACKLIGHT 100
-#endif
-
-#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
-
-#include "drivers/gdisp/st7565ergodox/st7565.h"
-
-/*===========================================================================*/
-/* Driver config defaults for backward compatibility. */
-/*===========================================================================*/
-#ifndef ST7565_LCD_BIAS
- #define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
-#endif
-#ifndef ST7565_ADC
- #define ST7565_ADC ST7565_ADC_NORMAL
-#endif
-#ifndef ST7565_COM_SCAN
- #define ST7565_COM_SCAN ST7565_COM_SCAN_INC
-#endif
-#ifndef ST7565_PAGE_ORDER
- #define ST7565_PAGE_ORDER 0,1,2,3
-#endif
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-typedef struct{
- bool_t buffer2;
- uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
-}PrivData;
-
-// Some common routines and macros
-#define PRIV(g) ((PrivData*)g->priv)
-#define RAM(g) (PRIV(g)->ram)
-#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
-
-// Some common routines and macros
-#define delay(us) gfxSleepMicroseconds(us)
-#define delay_ms(ms) gfxSleepMilliseconds(ms)
-
-#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y) (1<<((y)&7))
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/*
- * As this controller can't update on a pixel boundary we need to maintain the
- * the entire display surface in memory so that we can do the necessary bit
- * operations. Fortunately it is a small display in monochrome.
- * 64 * 128 / 8 = 1024 bytes.
- */
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
- // The private area is the display surface.
- g->priv = gfxAlloc(sizeof(PrivData));
- PRIV(g)->buffer2 = false;
-
- // Initialise the board interface
- init_board(g);
-
- // Hardware reset
- setpin_reset(g, TRUE);
- gfxSleepMilliseconds(20);
- setpin_reset(g, FALSE);
- gfxSleepMilliseconds(20);
-
- acquire_bus(g);
- write_cmd(g, ST7565_DISPLAY_OFF);
- write_cmd(g, ST7565_LCD_BIAS);
- write_cmd(g, ST7565_ADC);
- write_cmd(g, ST7565_COM_SCAN);
-
- write_cmd(g, ST7565_START_LINE | 0);
-
- write_cmd(g, ST7565_RESISTOR_RATIO | 0x6);
-
- // turn on voltage converter (VC=1, VR=0, VF=0)
- write_cmd(g, ST7565_POWER_CONTROL | 0x04);
- delay_ms(50);
-
- // turn on voltage regulator (VC=1, VR=1, VF=0)
- write_cmd(g, ST7565_POWER_CONTROL | 0x06);
- delay_ms(50);
-
- // turn on voltage follower (VC=1, VR=1, VF=1)
- write_cmd(g, ST7565_POWER_CONTROL | 0x07);
- delay_ms(50);
-
- write_cmd(g, 0xE2);
- write_cmd(g, ST7565_COM_SCAN);
- write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST*64/101);
- //write_cmd2(g, ST7565_CONTRAST, 0);
- write_cmd(g, ST7565_DISPLAY_ON);
- write_cmd(g, ST7565_ALLON_NORMAL);
- write_cmd(g, ST7565_INVERT_DISPLAY);
-
- write_cmd(g, ST7565_RMW);
-
- // Finish Init
- post_init_board(g);
-
- // Release the bus
- release_bus(g);
-
- /* Initialise the GDISP structure */
- g->g.Width = GDISP_SCREEN_WIDTH;
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Orientation = GDISP_ROTATE_0;
- g->g.Powermode = powerOn;
- g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
- g->g.Contrast = GDISP_INITIAL_CONTRAST;
- return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
- LLDSPEC void gdisp_lld_flush(GDisplay *g) {
- unsigned p;
-
- // Don't flush if we don't need it.
- if (!(g->flags & GDISP_FLG_NEEDFLUSH))
- return;
-
- acquire_bus(g);
- unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
- for (p = 0; p < 4; p++) {
- write_cmd(g, ST7565_PAGE | (p + dstOffset));
- write_cmd(g, ST7565_COLUMN_MSB | 0);
- write_cmd(g, ST7565_COLUMN_LSB | 0);
- write_cmd(g, ST7565_RMW);
- write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
- }
- unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
- write_cmd(g, ST7565_START_LINE | line);
- PRIV(g)->buffer2 = !PRIV(g)->buffer2;
- release_bus(g);
-
- g->flags &= ~GDISP_FLG_NEEDFLUSH;
- }
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
- LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_90:
- x = g->p.y;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- break;
- case GDISP_ROTATE_270:
- x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- y = g->p.x;
- break;
- }
- if (gdispColor2Native(g->p.color) != Black)
- RAM(g)[xyaddr(x, y)] |= xybit(y);
- else
- RAM(g)[xyaddr(x, y)] &= ~xybit(y);
- g->flags |= GDISP_FLG_NEEDFLUSH;
- }
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
- LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_90:
- x = g->p.y;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- break;
- case GDISP_ROTATE_270:
- x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- y = g->p.x;
- break;
- }
- return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
- }
-#endif
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
- LLDSPEC void gdisp_lld_control(GDisplay *g) {
- switch(g->p.x) {
- case GDISP_CONTROL_POWER:
- if (g->g.Powermode == (powermode_t)g->p.ptr)
- return;
- switch((powermode_t)g->p.ptr) {
- case powerOff:
- case powerSleep:
- case powerDeepSleep:
- acquire_bus(g);
- write_cmd(g, ST7565_DISPLAY_OFF);
- release_bus(g);
- break;
- case powerOn:
- acquire_bus(g);
- write_cmd(g, ST7565_DISPLAY_ON);
- release_bus(g);
- break;
- default:
- return;
- }
- g->g.Powermode = (powermode_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_ORIENTATION:
- if (g->g.Orientation == (orientation_t)g->p.ptr)
- return;
- switch((orientation_t)g->p.ptr) {
- /* Rotation is handled by the drawing routines */
- case GDISP_ROTATE_0:
- case GDISP_ROTATE_180:
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_90:
- case GDISP_ROTATE_270:
- g->g.Height = GDISP_SCREEN_WIDTH;
- g->g.Width = GDISP_SCREEN_HEIGHT;
- break;
- default:
- return;
- }
- g->g.Orientation = (orientation_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_CONTRAST:
- if ((unsigned)g->p.ptr > 100)
- g->p.ptr = (void *)100;
- acquire_bus(g);
- write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr)<<6)/101) & 0x3F);
- release_bus(g);
- g->g.Contrast = (unsigned)g->p.ptr;
- return;
- }
- }
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
deleted file mode 100644
index 48587b9e14..0000000000
--- a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support. */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL TRUE
-#define GDISP_HARDWARE_PIXELREAD TRUE
-#define GDISP_HARDWARE_CONTROL TRUE
-
-#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO
-
-#endif /* GFX_USE_GDISP */
-
-#endif /* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/st7565.h
deleted file mode 100644
index 48636b33d6..0000000000
--- a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/st7565.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _ST7565_H
-#define _ST7565_H
-
-#define ST7565_CONTRAST 0x81
-#define ST7565_ALLON_NORMAL 0xA4
-#define ST7565_ALLON 0xA5
-#define ST7565_POSITIVE_DISPLAY 0xA6
-#define ST7565_INVERT_DISPLAY 0xA7
-#define ST7565_DISPLAY_OFF 0xAE
-#define ST7565_DISPLAY_ON 0xAF
-
-#define ST7565_LCD_BIAS_7 0xA3
-#define ST7565_LCD_BIAS_9 0xA2
-
-#define ST7565_ADC_NORMAL 0xA0
-#define ST7565_ADC_REVERSE 0xA1
-
-#define ST7565_COM_SCAN_INC 0xC0
-#define ST7565_COM_SCAN_DEC 0xC8
-
-#define ST7565_START_LINE 0x40
-#define ST7565_PAGE 0xB0
-#define ST7565_COLUMN_MSB 0x10
-#define ST7565_COLUMN_LSB 0x00
-#define ST7565_RMW 0xE0
-
-#define ST7565_RESISTOR_RATIO 0x20
-#define ST7565_POWER_CONTROL 0x28
-
-#endif /* _ST7565_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-30 15:16:54 +0000