diff options
Diffstat (limited to 'keyboards/infinity_ergodox')
27 files changed, 0 insertions, 3445 deletions
diff --git a/keyboards/infinity_ergodox/MEMO.txt b/keyboards/infinity_ergodox/MEMO.txt deleted file mode 100644 index e2886aa002..0000000000 --- a/keyboards/infinity_ergodox/MEMO.txt +++ /dev/null @@ -1,385 +0,0 @@ -flabbergast's TMK/ChibiOS port -============================== -2015/10/16 - - -Build ------ -$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git - -$ cd tmk_keyboard -$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios -or -$ cd tmk_keyboard/tmk_core/tool/chibios -$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios - -$ cd tmk_keyboard/keyboard/infinity_chibios -$ make - - - - -Chibios Configuration ---------------------- -halconf.h: for HAL configuration - placed in project directory - read in chibios/os/hal/hal.mk - included in chibios/os/hal/include/hal.h -mcuconf.h: for MCU configuration - placed in project directory - included in halconf.h - - -Chibios Term ------------- -PAL = Port Abstraction Layer - palWritePad - palReadPad - palSetPad - chibios/os/hal/include/pal.h - -LLD = Low Level Driver - - -Makefile --------- - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) - MCU_FAMILY = KINETIS - MCU_SERIES = KL2x - - # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ - # or <this_dir>/ld/ - MCU_LDSCRIPT = MKL26Z64 - - # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ - MCU_STARTUP = kl2x - - # Board: it should exist either in <chibios>/os/hal/boards/ - # or <this_dir>/boards - BOARD = PJRC_TEENSY_LC - - MCU = cortex-m0 - - # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 - ARMV = 6 - - -halconf.h ---------- - - -mcuconf.h ---------- - - -chconf.h --------- - - -ld script ---------- ---- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld 2015-10-15 09:08:58.732904304 +0900 -+++ ld/MKL26Z64.ld 2015-10-15 08:48:06.430215496 +0900 -@@ -27,7 +27,8 @@ - { - flash0 : org = 0x00000000, len = 0xc0 - flashcfg : org = 0x00000400, len = 0x10 -- flash : org = 0x00000410, len = 64k - 0x410 -+ flash : org = 0x00000410, len = 62k - 0x410 -+ eeprom_emu : org = 0x0000F800, len = 2k - ram : org = 0x1FFFF800, len = 8k - } - -@@ -35,6 +36,10 @@ - __ram_size__ = LENGTH(ram); - __ram_end__ = __ram_start__ + __ram_size__; - -+__eeprom_workarea_start__ = ORIGIN(eeprom_emu); -+__eeprom_workarea_size__ = LENGTH(eeprom_emu); -+__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; -+ - SECTIONS - { - . = 0; - - - -Configuration/Startup for Infinity 60% --------------------------------------- -Configuration: - - -Clock: -Inifinity - FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz - Clock dividor: - SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock - SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock - SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock - Internal reference clock: - MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL - MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable - FLL multipilication: - MCG_C4[DMX32] = 1 - MCG_C4[DRST_DRS] = 01 FLL factor 1464 * 32.768kHz = 48MHz - -chibios/os/hal/ports/KINETIS/K20x/hal_lld.c - k20x_clock_init(): called in __early_init() defined in board.c - disable watchdog and configure clock - - configurable macros: - KINETIS_NO_INIT: whether init or not - KINETIS_MCG_MODE: clock mode - KINETIS_MCG_MODE_FEI - KINETIS_MCG_MODE_PEE - hal/ports/KINETIS/K20x/hal_lld.h - - -chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h - PALConfig pal_default_config - boardInit() - __early_init() - macro definitions for board infos, freq and mcu type - -chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c - -USB - - -Startup -------- - common/ports/ARMCMx/GCC/crt0_v[67]m.s - Reset_Handler: startup code - common/ports/ARMCMx/GCC/crt1.c - __core_init(): weak - __early_init(): weak - __late_init(): weak - __default_exit(): weak - called from Reset_Handler of crt0 - common/ports/ARMCMx/GCC/vector.c - common/ports/ARMCMx/GCC/ld/*.ld - -chibios/os/common/ports/ARMCMx/compilers/GCC/ -├── crt0_v6m.s -├── crt0_v7m.s -├── crt1.c -├── ld -│ ├── MK20DX128BLDR3.ld -│ ├── MK20DX128BLDR4.ld -│ ├── MK20DX128.ld -│ ├── MK20DX256.ld -│ ├── MKL25Z128.ld -│ ├── MKL26Z128.ld -│ ├── MKL26Z64.ld -│ └── STM32L476xG.ld -├── mk -│ ├── startup_k20x5.mk -│ ├── startup_k20x7.mk -│ ├── startup_k20x.mk -│ ├── startup_kl2x.mk -│ └── startup_stm32l4xx.mk -├── rules.ld -├── rules.mk -└── vectors.c - -chibios/os/hal/ -├── boards -│ ├── FREESCALE_FREEDOM_K20D50M -│ │ ├── board.c -│ │ ├── board.h -│ │ └── board.mk -│ ├── MCHCK_K20 -│ │ ├── board.c -│ │ ├── board.h -│ │ └── board.mk -│ ├── PJRC_TEENSY_3 -│ │ ├── board.c -│ │ ├── board.h -│ │ └── board.mk -│ ├── PJRC_TEENSY_3_1 -│ │ ├── board.c -│ │ ├── board.h -│ │ └── board.mk -│ ├── PJRC_TEENSY_LC -│ │ ├── board.c -│ │ ├── board.h -│ │ └── board.mk -│ ├── readme.txt -│ ├── simulator -│ │ ├── board.c -│ │ ├── board.h -│ │ └── board.mk -│ ├── ST_NUCLEO_F030R8 -│ │ ├── board.c -│ │ ├── board.h -│ │ ├── board.mk -│ │ └── cfg -│ │ └── board.chcfg -├── hal.mk -├── include -│ ├── adc.h -│ ├── can.h -│ ├── dac.h -│ ├── ext.h -│ ├── gpt.h -│ ├── hal_channels.h -│ ├── hal_files.h -│ ├── hal.h -│ ├── hal_ioblock.h -│ ├── hal_mmcsd.h -│ ├── hal_queues.h -│ ├── hal_streams.h -│ ├── i2c.h -│ ├── i2s.h -│ ├── icu.h -│ ├── mac.h -│ ├── mii.h -│ ├── mmc_spi.h -│ ├── pal.h -│ ├── pwm.h -│ ├── rtc.h -│ ├── sdc.h -│ ├── serial.h -│ ├── serial_usb.h -│ ├── spi.h -│ ├── st.h -│ ├── uart.h -│ └── usb.h -├── lib -│ └── streams -│ ├── chprintf.c -│ ├── chprintf.h -│ ├── memstreams.c -│ ├── memstreams.h -│ ├── nullstreams.c -│ └── nullstreams.h -├── osal -│ ├── nil -│ │ ├── osal.c -│ │ ├── osal.h -│ │ └── osal.mk -│ ├── os-less -│ │ └── ARMCMx -│ │ ├── osal.c -│ │ ├── osal.h -│ │ └── osal.mk -│ └── rt -│ ├── osal.c -│ ├── osal.h -│ └── osal.mk -├── ports -│ ├── AVR -│ ├── common -│ │ └── ARMCMx -│ │ ├── mpu.h -│ │ ├── nvic.c -│ │ └── nvic.h -│ ├── KINETIS -│ │ ├── K20x -│ │ │ ├── hal_lld.c -│ │ │ ├── hal_lld.h -│ │ │ ├── kinetis_registry.h -│ │ │ ├── platform.dox -│ │ │ ├── platform.mk -│ │ │ ├── pwm_lld.c -│ │ │ ├── pwm_lld.h -│ │ │ ├── spi_lld.c -│ │ │ └── spi_lld.h -│ │ ├── KL2x -│ │ │ ├── hal_lld.c -│ │ │ ├── hal_lld.h -│ │ │ ├── kinetis_registry.h -│ │ │ ├── platform.mk -│ │ │ ├── pwm_lld.c -│ │ │ └── pwm_lld.h -│ │ ├── LLD -│ │ │ ├── adc_lld.c -│ │ │ ├── adc_lld.h -│ │ │ ├── ext_lld.c -│ │ │ ├── ext_lld.h -│ │ │ ├── gpt_lld.c -│ │ │ ├── gpt_lld.h -│ │ │ ├── i2c_lld.c -│ │ │ ├── i2c_lld.h -│ │ │ ├── pal_lld.c -│ │ │ ├── pal_lld.h -│ │ │ ├── serial_lld.c -│ │ │ ├── serial_lld.h -│ │ │ ├── st_lld.c -│ │ │ ├── st_lld.h -│ │ │ ├── usb_lld.c -│ │ │ └── usb_lld.h -│ │ └── README.md -│ ├── LPC -│ ├── simulator -│ └── STM32 -├── src -│ ├── adc.c -│ ├── can.c -│ ├── dac.c -│ ├── ext.c -│ ├── gpt.c -│ ├── hal.c -│ ├── hal_mmcsd.c -│ ├── hal_queues.c -│ ├── i2c.c -│ ├── i2s.c -│ ├── icu.c -│ ├── mac.c -│ ├── mmc_spi.c -│ ├── pal.c -│ ├── pwm.c -│ ├── rtc.c -│ ├── sdc.c -│ ├── serial.c -│ ├── serial_usb.c -│ ├── spi.c -│ ├── st.c -│ ├── uart.c -│ └── usb.c -└── templates - ├── adc_lld.c - ├── adc_lld.h - ├── can_lld.c - ├── can_lld.h - ├── dac_lld.c - ├── dac_lld.h - ├── ext_lld.c - ├── ext_lld.h - ├── gpt_lld.c - ├── gpt_lld.h - ├── halconf.h - ├── hal_lld.c - ├── hal_lld.h - ├── i2c_lld.c - ├── i2c_lld.h - ├── i2s_lld.c - ├── i2s_lld.h - ├── icu_lld.c - ├── icu_lld.h - ├── mac_lld.c - ├── mac_lld.h - ├── mcuconf.h - ├── osal - │ ├── osal.c - │ ├── osal.h - │ └── osal.mk - ├── pal_lld.c - ├── pal_lld.h - ├── platform.mk - ├── pwm_lld.c - ├── pwm_lld.h - ├── rtc_lld.c - ├── rtc_lld.h - ├── sdc_lld.c - ├── sdc_lld.h - ├── serial_lld.c - ├── serial_lld.h - ├── spi_lld.c - ├── spi_lld.h - ├── st_lld.c - ├── st_lld.h - ├── uart_lld.c - ├── uart_lld.h - ├── usb_lld.c - └── usb_lld.h diff --git a/keyboards/infinity_ergodox/Makefile b/keyboards/infinity_ergodox/Makefile deleted file mode 100644 index 7edc03d8cc..0000000000 --- a/keyboards/infinity_ergodox/Makefile +++ /dev/null @@ -1,85 +0,0 @@ -# project specific files -SRC = matrix.c \ - led.c - -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -# - For Teensies, FAMILY = KINETIS and SERIES is either -# KL2x (LC) or K20x (3.0,3.1,3.2). -# - For Infinity KB, SERIES = K20x -MCU_FAMILY = KINETIS -MCU_SERIES = K20x - -# Linker script to use -# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -# - NOTE: a custom ld script is needed for EEPROM on Teensy LC -# - LDSCRIPT = -# - MKL26Z64 for Teensy LC -# - MK20DX128 for Teensy 3.0 -# - MK20DX256 for Teensy 3.1 and 3.2 -# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader -# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader -MCU_LDSCRIPT = MK20DX256BLDR8 - -# Startup code to use -# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ -# - STARTUP = -# - kl2x for Teensy LC -# - k20x5 for Teensy 3.0 and Infinity 60% -# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox -MCU_STARTUP = k20x7 - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -# - BOARD = -# - PJRC_TEENSY_LC for Teensy LC -# - PJRC_TEENSY_3 for Teensy 3.0 -# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 -# - MCHCK_K20 for Infinity KB -#BOARD = MCHCK_K20 -BOARD = PJRC_TEENSY_3_1 - -# Cortex version -# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -# I.e. 6 for Teensy LC; 7 for Teensy 3.x -ARMV = 7 - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -OPT_DEFS = -DCORTEX_VTOR_INIT=0x00002000 - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration -## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) -MOUSEKEY_ENABLE ?= yes # Mouse keys -EXTRAKEY_ENABLE ?= yes # Audio control and System control -CONSOLE_ENABLE ?= yes # Console for debug -COMMAND_ENABLE ?= yes # Commands for debug and configuration -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover -CUSTOM_MATRIX ?= yes # Custom matrix file -SERIAL_LINK_ENABLE = yes -VISUALIZER_ENABLE ?= yes -LCD_ENABLE ?= yes -LED_ENABLE ?= yes -LCD_BACKLIGHT_ENABLE ?= yes - -ifdef LCD_ENABLE -include drivers/gdisp/st7565ergodox/driver.mk -endif - -ifdef LED_ENABLE -include drivers/gdisp/IS31FL3731C/driver.mk -endif - -ifndef QUANTUM_DIR - include ../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/infinity_ergodox/bootloader_defs.h b/keyboards/infinity_ergodox/bootloader_defs.h deleted file mode 100644 index c67153be60..0000000000 --- a/keyboards/infinity_ergodox/bootloader_defs.h +++ /dev/null @@ -1 +0,0 @@ -#define KIIBOHD_BOOTLOADER diff --git a/keyboards/infinity_ergodox/chconf.h b/keyboards/infinity_ergodox/chconf.h deleted file mode 100644 index d59c35eb68..0000000000 --- a/keyboards/infinity_ergodox/chconf.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 100000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 20 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/keyboards/infinity_ergodox/config.h b/keyboards/infinity_ergodox/config.h deleted file mode 100644 index d24ee0f056..0000000000 --- a/keyboards/infinity_ergodox/config.h +++ /dev/null @@ -1,80 +0,0 @@ -/* -Copyright 2015 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6464 -#define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER "TMK" -#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00' -#define PRODUCT "Infinity keyboard/TMK" -#define USBSTR_PRODUCT 'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00' - -/* key matrix size */ -#define MATRIX_ROWS 18 -#define MATRIX_COLS 5 -#define LOCAL_MATRIX_ROWS 9 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -//#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -//#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* Keymap for Infiity prototype */ -#define INFINITY_PROTOTYPE - -#define SERIAL_LINK_BAUD 562500 -#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1) -// The visualizer needs gfx thread priorities -#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2) - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h deleted file mode 100644 index 2ea73f1fb3..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h +++ /dev/null @@ -1,113 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -static const I2CConfig i2ccfg = { - 400000 // clock speed (Hz); 400kHz max for IS31 -}; - -#define GDISP_SCREEN_WIDTH 7 -#define GDISP_SCREEN_HEIGHT 7 - -static const uint8_t led_mask[] = { - 0xFF, 0x00, /* C1-1 -> C1-16 */ - 0xFF, 0x00, /* C2-1 -> C2-16 */ - 0xFF, 0x00, /* C3-1 -> C3-16 */ - 0xFF, 0x00, /* C4-1 -> C4-16 */ - 0x3F, 0x00, /* C5-1 -> C5-16 */ - 0x00, 0x00, /* C6-1 -> C6-16 */ - 0x00, 0x00, /* C7-1 -> C7-16 */ - 0x00, 0x00, /* C8-1 -> C8-16 */ - 0x00, 0x00, /* C9-1 -> C9-16 */ -}; - -// The address of the LED -#define LA(c, r) (c + r * 16 ) -// Need to be an address that is not mapped, but inside the range of the controller matrix -#define NA LA(8, 8) - -// The numbers in the comments are the led numbers DXX on the PCB -// The mapping is taken from the schematic of left hand side -static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { -// 45 44 43 42 41 40 39 - { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, -// 52 51 50 49 48 47 46 - { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) }, -// 58 57 56 55 54 53 N/A - { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA }, -// 67 66 65 64 63 62 61 - { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) }, -// 76 75 74 73 72 60 59 - { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) }, -// N/A N/A N/A N/A N/A N/A 68 - { NA, NA, NA, NA, NA, NA, LA(5, 4) }, -// N/A N/A N/A N/A 71 70 69 - { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) }, -}; - - -#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND -#define IS31_TIMEOUT 5000 - -static GFXINLINE void init_board(GDisplay *g) { - (void) g; - /* I2C pins */ - palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL - palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA - palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); - palClearPad(GPIOB, 16); - /* start I2C */ - i2cStart(&I2CD1, &i2ccfg); - // try high drive (from kiibohd) - I2CD1.i2c->C2 |= I2Cx_C2_HDRS; - // try glitch fixing (from kiibohd) - I2CD1.i2c->FLT = 4; -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { - (void) g; - return led_mask; -} - -static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) -{ - (void) g; - return led_mapping[y][x]; -} - -static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { - (void) g; - if(!shutdown) { - palSetPad(GPIOB, 16); - } - else { - palClearPad(GPIOB, 16); - } -} - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/driver.mk deleted file mode 100644 index f32d0d8685..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/gdisp/IS31FL3731C -GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c diff --git a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c deleted file mode 100644 index 1d21f0c498..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c +++ /dev/null @@ -1,333 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "gfx.h" - -#if GFX_USE_GDISP - -#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_ERGODOX -#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h" -#include "src/gdisp/gdisp_driver.h" - -#include "board_IS31FL3731C.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#ifndef GDISP_SCREEN_HEIGHT - #define GDISP_SCREEN_HEIGHT 9 -#endif -#ifndef GDISP_SCREEN_WIDTH - #define GDISP_SCREEN_WIDTH 16 -#endif -#ifndef GDISP_INITIAL_CONTRAST - #define GDISP_INITIAL_CONTRAST 0 -#endif -#ifndef GDISP_INITIAL_BACKLIGHT - #define GDISP_INITIAL_BACKLIGHT 100 -#endif - -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) - -#define IS31_ADDR_DEFAULT 0x74 - -#define IS31_REG_CONFIG 0x00 -// bits in reg -#define IS31_REG_CONFIG_PICTUREMODE 0x00 -#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 -#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 -// D2:D0 bits are starting frame for autoplay mode - -#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode - -#define IS31_REG_AUTOPLAYCTRL1 0x02 -// D6:D4 number of loops (000=infty) -// D2:D0 number of frames to be used - -#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) - -#define IS31_REG_DISPLAYOPT 0x05 -#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames -#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 -// D2:D0 bits blink period time (*0.27s) - -#define IS31_REG_AUDIOSYNC 0x06 -#define IS31_REG_AUDIOSYNC_ENABLE 0x1 - -#define IS31_REG_FRAMESTATE 0x07 - -#define IS31_REG_BREATHCTRL1 0x08 -// D6:D4 fade out time (26ms*2^i) -// D2:D0 fade in time (26ms*2^i) - -#define IS31_REG_BREATHCTRL2 0x09 -#define IS31_REG_BREATHCTRL2_ENABLE 0x10 -// D2:D0 extinguish time (3.5ms*2^i) - -#define IS31_REG_SHUTDOWN 0x0A -#define IS31_REG_SHUTDOWN_OFF 0x0 -#define IS31_REG_SHUTDOWN_ON 0x1 - -#define IS31_REG_AGCCTRL 0x0B -#define IS31_REG_ADCRATE 0x0C - -#define IS31_COMMANDREGISTER 0xFD -#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' -#define IS31_FUNCTIONREG_SIZE 0xD - -#define IS31_FRAME_SIZE 0xB4 - -#define IS31_PWM_REG 0x24 -#define IS31_PWM_SIZE 0x90 - -#define IS31_LED_MASK_SIZE 0x12 -#define IS31_SCREEN_WIDTH 16 - -#define IS31 - -//Generated by http://jared.geek.nz/2013/feb/linear-led-pwm -const unsigned char cie[256] = { - 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, - 3, 4, 4, 4, 4, 4, 4, 5, 5, 5, - 5, 5, 6, 6, 6, 6, 6, 7, 7, 7, - 7, 8, 8, 8, 8, 9, 9, 9, 10, 10, - 10, 10, 11, 11, 11, 12, 12, 12, 13, 13, - 13, 14, 14, 15, 15, 15, 16, 16, 17, 17, - 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, - 22, 23, 23, 24, 24, 25, 25, 26, 26, 27, - 28, 28, 29, 29, 30, 31, 31, 32, 32, 33, - 34, 34, 35, 36, 37, 37, 38, 39, 39, 40, - 41, 42, 43, 43, 44, 45, 46, 47, 47, 48, - 49, 50, 51, 52, 53, 54, 54, 55, 56, 57, - 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, - 68, 70, 71, 72, 73, 74, 75, 76, 77, 79, - 80, 81, 82, 83, 85, 86, 87, 88, 90, 91, - 92, 94, 95, 96, 98, 99, 100, 102, 103, 105, - 106, 108, 109, 110, 112, 113, 115, 116, 118, 120, - 121, 123, 124, 126, 128, 129, 131, 132, 134, 136, - 138, 139, 141, 143, 145, 146, 148, 150, 152, 154, - 155, 157, 159, 161, 163, 165, 167, 169, 171, 173, - 175, 177, 179, 181, 183, 185, 187, 189, 191, 193, - 196, 198, 200, 202, 204, 207, 209, 211, 214, 216, - 218, 220, 223, 225, 228, 230, 232, 235, 237, 240, - 242, 245, 247, 250, 252, 255, -}; - - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct{ - uint8_t write_buffer_offset; - uint8_t write_buffer[IS31_FRAME_SIZE]; - uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; - uint8_t page; -}__attribute__((__packed__)) PrivData; - -// Some common routines and macros -#define PRIV(g) ((PrivData*)g->priv) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -static GFXINLINE void write_page(GDisplay* g, uint8_t page) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = IS31_COMMANDREGISTER; - tx[1] = page; - write_data(g, tx, 2); -} - -static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = reg; - tx[1] = data; - write_page(g, page); - write_data(g, tx, 2); -} - -static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { - PRIV(g)->write_buffer_offset = offset; - write_page(g, page); - write_data(g, (uint8_t*)PRIV(g), length + 1); -} - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - __builtin_memset(PRIV(g), 0, sizeof(PrivData)); - PRIV(g)->page = 0; - - // Initialise the board interface - init_board(g); - gfxSleepMilliseconds(10); - - // zero function page, all registers (assuming full_page is all zeroes) - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - set_hardware_shutdown(g, false); - gfxSleepMilliseconds(10); - // software shutdown - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - // zero function page, all registers - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - gfxSleepMilliseconds(10); - - - // zero all LED registers on all 8 pages, and enable the mask - __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); - for(uint8_t i=0; i<8; i++) { - write_ram(g, i, 0, IS31_FRAME_SIZE); - gfxSleepMilliseconds(1); - } - - // software shutdown disable (i.e. turn stuff on) - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - gfxSleepMilliseconds(10); - - // Finish Init - post_init_board(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOn; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -#if GDISP_HARDWARE_FLUSH - LLDSPEC void gdisp_lld_flush(GDisplay *g) { - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - PRIV(g)->page++; - PRIV(g)->page %= 2; - // TODO: some smarter algorithm for this - // We should run only one physical page at a time - // This way we don't need to send so much data, and - // we could use slightly less memory - uint8_t* src = PRIV(g)->frame_buffer; - for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) { - for (int x=0;x<GDISP_SCREEN_WIDTH;x++) { - PRIV(g)->write_buffer[get_led_address(g, x, y)]=cie[*src]; - ++src; - } - } - write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); - gfxSleepMilliseconds(1); - write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_DRAWPIXEL - LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); - g->flags |= GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_PIXELREAD - LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); - } -#endif - -#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL - LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - break; - case powerOn: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_CONTRAST: - return; - } - } -#endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h deleted file mode 100644 index bb28ad775e..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE - -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/driver.mk b/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/driver.mk deleted file mode 100644 index 16c3f80f53..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/gdisp/emulator_lcd -GFXSRC += drivers/gdisp/emulator_lcd/emulator_lcd.c diff --git a/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/emulator_lcd.c b/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/emulator_lcd.c deleted file mode 100644 index babfe2b367..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/emulator_lcd.c +++ /dev/null @@ -1,10 +0,0 @@ -#define GDISP_DRIVER_VMT GDISPVMT_EMULATOR_LCD_ERGODOX -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO -#define GDISP_SCREEN_WIDTH 128 -#define GDISP_SCREEN_HEIGHT 32 -#define ROTATE_180_IS_FLIP - -#include "emulator/emulator_driver_impl.h" diff --git a/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/driver.mk b/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/driver.mk deleted file mode 100644 index 2554344321..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/gdisp/emulator_led -GFXSRC += drivers/gdisp/emulator_led/emulator_led.c diff --git a/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/emulator_led.c b/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/emulator_led.c deleted file mode 100644 index b0ebcdc475..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/emulator_led.c +++ /dev/null @@ -1,10 +0,0 @@ -#define GDISP_DRIVER_VMT GDISPVMT_EMULATOR_LED_ERGODOX -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO -#define GDISP_SCREEN_WIDTH 7 -#define GDISP_SCREEN_HEIGHT 7 -#define ROTATE_180_IS_FLIP - -#include "emulator/emulator_driver_impl.h" diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/board_ST7565.h deleted file mode 100644 index 290571ce5b..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/board_ST7565.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -#include "print.h" - -#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6 -#define ST7565_ADC ST7565_ADC_NORMAL -#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC -#define ST7565_PAGE_ORDER 0,1,2,3 -/* - * Custom page order for several LCD boards, e.g. HEM12864-99 - * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 - */ - -#define ST7565_GPIOPORT GPIOC -#define ST7565_PORT PORTC -#define ST7565_A0_PIN 7 -#define ST7565_RST_PIN 8 -#define ST7565_MOSI_PIN 6 -#define ST7565_SLCK_PIN 5 -#define ST7565_SS_PIN 4 - -#define palSetPadModeRaw(portname, bits) \ - ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits - -#define palSetPadModeNamed(portname, portmode) \ - palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode) - -#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2) -// DSPI Clock and Transfer Attributes -// Frame Size: 8 bits -// MSB First -// CLK Low by default -static const SPIConfig spi1config = { - NULL, - /* HW dependent part.*/ - ST7565_GPIOPORT, - ST7565_SS_PIN, - SPIx_CTARn_FMSZ(7) - | SPIx_CTARn_ASC(7) - | SPIx_CTARn_DT(7) - | SPIx_CTARn_CSSCK(7) - | SPIx_CTARn_PBR(0) - | SPIx_CTARn_BR(7) - //SPI_CR1_BR_0 -}; - -static bool_t st7565_is_data_mode = 1; - -static GFXINLINE void init_board(GDisplay *g) { - (void) g; - palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); - st7565_is_data_mode = 1; - palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); - palSetPadModeRaw(MOSI, ST7565_SPI_MODE); - palSetPadModeRaw(SLCK, ST7565_SPI_MODE); - palSetPadModeRaw(SS, ST7565_SPI_MODE); - - spiInit(); - spiStart(&SPID1, &spi1config); - spiSelect(&SPID1); -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { - (void) g; - if (state) { - palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN); - } - else { - palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); - } -} - -static GFXINLINE void acquire_bus(GDisplay *g) { - (void) g; - // Only the LCD is using the SPI bus, so no need to acquire - // spiAcquireBus(&SPID1); -} - -static GFXINLINE void release_bus(GDisplay *g) { - (void) g; - // Only the LCD is using the SPI bus, so no need to release - //spiReleaseBus(&SPID1); -} - -static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) { - (void) g; - if (st7565_is_data_mode) { - // The sleeps need to be at lest 10 vs 25 ns respectively - // So let's sleep two ticks, one tick might not be enough - // if we are at the end of the tick - chThdSleep(2); - palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); - chThdSleep(2); - st7565_is_data_mode = 0; - } - spiSend(&SPID1, 1, &cmd); -} - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - if (!st7565_is_data_mode) { - // The sleeps need to be at lest 10 vs 25 ns respectively - // So let's sleep two ticks, one tick might not be enough - // if we are at the end of the tick - chThdSleep(2); - palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); - chThdSleep(2); - st7565_is_data_mode = 1; - } - spiSend(&SPID1, length, data); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/driver.mk deleted file mode 100644 index 889a1a0317..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/gdisp/st7565ergodox -GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c deleted file mode 100644 index c33aea81a8..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#include "gfx.h" - -#if GFX_USE_GDISP - -#define GDISP_DRIVER_VMT GDISPVMT_ST7565_ERGODOX -#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h" -#include "src/gdisp/gdisp_driver.h" - -#include "board_ST7565.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#ifndef GDISP_SCREEN_HEIGHT - #define GDISP_SCREEN_HEIGHT 32 -#endif -#ifndef GDISP_SCREEN_WIDTH - #define GDISP_SCREEN_WIDTH 128 -#endif -#ifndef GDISP_INITIAL_CONTRAST - #define GDISP_INITIAL_CONTRAST 0 -#endif -#ifndef GDISP_INITIAL_BACKLIGHT - #define GDISP_INITIAL_BACKLIGHT 100 -#endif - -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) - -#include "drivers/gdisp/st7565ergodox/st7565.h" - -/*===========================================================================*/ -/* Driver config defaults for backward compatibility. */ -/*===========================================================================*/ -#ifndef ST7565_LCD_BIAS - #define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 -#endif -#ifndef ST7565_ADC - #define ST7565_ADC ST7565_ADC_NORMAL -#endif -#ifndef ST7565_COM_SCAN - #define ST7565_COM_SCAN ST7565_COM_SCAN_INC -#endif -#ifndef ST7565_PAGE_ORDER - #define ST7565_PAGE_ORDER 0,1,2,3 -#endif - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct{ - bool_t buffer2; - uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8]; -}PrivData; - -// Some common routines and macros -#define PRIV(g) ((PrivData*)g->priv) -#define RAM(g) (PRIV(g)->ram) -#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } -#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } - -// Some common routines and macros -#define delay(us) gfxSleepMicroseconds(us) -#define delay_ms(ms) gfxSleepMilliseconds(ms) - -#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH) -#define xybit(y) (1<<((y)&7)) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/* - * As this controller can't update on a pixel boundary we need to maintain the - * the entire display surface in memory so that we can do the necessary bit - * operations. Fortunately it is a small display in monochrome. - * 64 * 128 / 8 = 1024 bytes. - */ - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - PRIV(g)->buffer2 = false; - - // Initialise the board interface - init_board(g); - - // Hardware reset - setpin_reset(g, TRUE); - gfxSleepMilliseconds(20); - setpin_reset(g, FALSE); - gfxSleepMilliseconds(20); - - acquire_bus(g); - write_cmd(g, ST7565_DISPLAY_OFF); - write_cmd(g, ST7565_LCD_BIAS); - write_cmd(g, ST7565_ADC); - write_cmd(g, ST7565_COM_SCAN); - - write_cmd(g, ST7565_START_LINE | 0); - - write_cmd(g, ST7565_RESISTOR_RATIO | 0x6); - - // turn on voltage converter (VC=1, VR=0, VF=0) - write_cmd(g, ST7565_POWER_CONTROL | 0x04); - delay_ms(50); - - // turn on voltage regulator (VC=1, VR=1, VF=0) - write_cmd(g, ST7565_POWER_CONTROL | 0x06); - delay_ms(50); - - // turn on voltage follower (VC=1, VR=1, VF=1) - write_cmd(g, ST7565_POWER_CONTROL | 0x07); - delay_ms(50); - - write_cmd(g, 0xE2); - write_cmd(g, ST7565_COM_SCAN); - write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST*64/101); - //write_cmd2(g, ST7565_CONTRAST, 0); - write_cmd(g, ST7565_DISPLAY_ON); - write_cmd(g, ST7565_ALLON_NORMAL); - write_cmd(g, ST7565_INVERT_DISPLAY); - - write_cmd(g, ST7565_RMW); - - // Finish Init - post_init_board(g); - - // Release the bus - release_bus(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOn; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -#if GDISP_HARDWARE_FLUSH - LLDSPEC void gdisp_lld_flush(GDisplay *g) { - unsigned p; - - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - acquire_bus(g); - unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0); - for (p = 0; p < 4; p++) { - write_cmd(g, ST7565_PAGE | (p + dstOffset)); - write_cmd(g, ST7565_COLUMN_MSB | 0); - write_cmd(g, ST7565_COLUMN_LSB | 0); - write_cmd(g, ST7565_RMW); - write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); - } - unsigned line = (PRIV(g)->buffer2 ? 32 : 0); - write_cmd(g, ST7565_START_LINE | line); - PRIV(g)->buffer2 = !PRIV(g)->buffer2; - release_bus(g); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_DRAWPIXEL - LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT-1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = GDISP_SCREEN_HEIGHT-1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT-1 - g->p.y; - y = g->p.x; - break; - } - if (gdispColor2Native(g->p.color) != Black) - RAM(g)[xyaddr(x, y)] |= xybit(y); - else - RAM(g)[xyaddr(x, y)] &= ~xybit(y); - g->flags |= GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_PIXELREAD - LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT-1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = GDISP_SCREEN_HEIGHT-1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT-1 - g->p.y; - y = g->p.x; - break; - } - return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; - } -#endif - -#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL - LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - acquire_bus(g); - write_cmd(g, ST7565_DISPLAY_OFF); - release_bus(g); - break; - case powerOn: - acquire_bus(g); - write_cmd(g, ST7565_DISPLAY_ON); - release_bus(g); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_CONTRAST: - if ((unsigned)g->p.ptr > 100) - g->p.ptr = (void *)100; - acquire_bus(g); - write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr)<<6)/101) & 0x3F); - release_bus(g); - g->g.Contrast = (unsigned)g->p.ptr; - return; - } - } -#endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_config.h deleted file mode 100644 index 48587b9e14..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_config.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE - -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/st7565.h deleted file mode 100644 index 48636b33d6..0000000000 --- a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/st7565.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _ST7565_H -#define _ST7565_H - -#define ST7565_CONTRAST 0x81 -#define ST7565_ALLON_NORMAL 0xA4 -#define ST7565_ALLON 0xA5 -#define ST7565_POSITIVE_DISPLAY 0xA6 -#define ST7565_INVERT_DISPLAY 0xA7 -#define ST7565_DISPLAY_OFF 0xAE -#define ST7565_DISPLAY_ON 0xAF - -#define ST7565_LCD_BIAS_7 0xA3 -#define ST7565_LCD_BIAS_9 0xA2 - -#define ST7565_ADC_NORMAL 0xA0 -#define ST7565_ADC_REVERSE 0xA1 - -#define ST7565_COM_SCAN_INC 0xC0 -#define ST7565_COM_SCAN_DEC 0xC8 - -#define ST7565_START_LINE 0x40 -#define ST7565_PAGE 0xB0 -#define ST7565_COLUMN_MSB 0x10 -#define ST7565_COLUMN_LSB 0x00 -#define ST7565_RMW 0xE0 - -#define ST7565_RESISTOR_RATIO 0x20 -#define ST7565_POWER_CONTROL 0x28 - -#endif /* _ST7565_H */ diff --git a/keyboards/infinity_ergodox/gfxconf.h b/keyboards/infinity_ergodox/gfxconf.h deleted file mode 100644 index 8caa577b73..0000000000 --- a/keyboards/infinity_ergodox/gfxconf.h +++ /dev/null @@ -1,331 +0,0 @@ -/** - * This file has a different license to the rest of the uGFX system. - * You can copy, modify and distribute this file as you see fit. - * You do not need to publish your source modifications to this file. - * The only thing you are not permitted to do is to relicense it - * under a different license. - */ - -/** - * Copy this file into your project directory and rename it as gfxconf.h - * Edit your copy to turn on the uGFX features you want to use. - * The values below are the defaults. - * - * Only remove the comments from lines where you want to change the - * default value. This allows definitions to be included from - * driver makefiles when required and provides the best future - * compatibility for your project. - * - * Please use spaces instead of tabs in this file. - */ - -#ifndef _GFXCONF_H -#define _GFXCONF_H - - -/////////////////////////////////////////////////////////////////////////// -// GOS - One of these must be defined, preferably in your Makefile // -/////////////////////////////////////////////////////////////////////////// -//#define GFX_USE_OS_CHIBIOS TRUE -//#define GFX_USE_OS_FREERTOS FALSE -// #define GFX_FREERTOS_USE_TRACE FALSE -//#define GFX_USE_OS_WIN32 FALSE -//#define GFX_USE_OS_LINUX FALSE -//#define GFX_USE_OS_OSX FALSE -//#define GFX_USE_OS_ECOS FALSE -//#define GFX_USE_OS_RAWRTOS FALSE -//#define GFX_USE_OS_ARDUINO FALSE -//#define GFX_USE_OS_KEIL FALSE -//#define GFX_USE_OS_CMSIS FALSE -//#define GFX_USE_OS_RAW32 FALSE -// #define INTERRUPTS_OFF() optional_code -// #define INTERRUPTS_ON() optional_code -// These are not defined by default for some reason -#define GOS_NEED_X_THREADS FALSE -#define GOS_NEED_X_HEAP FALSE - -// Options that (should where relevant) apply to all operating systems - #define GFX_NO_INLINE FALSE -// #define GFX_COMPILER GFX_COMPILER_UNKNOWN -// #define GFX_CPU GFX_CPU_UNKNOWN -// #define GFX_OS_HEAP_SIZE 0 -// #define GFX_OS_NO_INIT FALSE -// #define GFX_OS_INIT_NO_WARNING FALSE -// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine -// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine -// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine - - -/////////////////////////////////////////////////////////////////////////// -// GDISP // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GDISP TRUE - -//#define GDISP_NEED_AUTOFLUSH FALSE -//#define GDISP_NEED_TIMERFLUSH FALSE -//#define GDISP_NEED_VALIDATION TRUE -//#define GDISP_NEED_CLIP TRUE -#define GDISP_NEED_CIRCLE TRUE -#define GDISP_NEED_ELLIPSE TRUE -#define GDISP_NEED_ARC TRUE -#define GDISP_NEED_ARCSECTORS TRUE -#define GDISP_NEED_CONVEX_POLYGON TRUE -//#define GDISP_NEED_SCROLL FALSE -#define GDISP_NEED_PIXELREAD TRUE -#define GDISP_NEED_CONTROL TRUE -//#define GDISP_NEED_QUERY FALSE -//#define GDISP_NEED_MULTITHREAD FALSE -//#define GDISP_NEED_STREAMING FALSE -#define GDISP_NEED_TEXT TRUE -// #define GDISP_NEED_TEXT_WORDWRAP FALSE -// #define GDISP_NEED_ANTIALIAS FALSE -// #define GDISP_NEED_UTF8 FALSE - #define GDISP_NEED_TEXT_KERNING TRUE -// #define GDISP_INCLUDE_FONT_UI1 FALSE -// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font. -// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE - #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE -// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE -// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE - #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE -// #define GDISP_INCLUDE_USER_FONTS FALSE - -//#define GDISP_NEED_IMAGE FALSE -// #define GDISP_NEED_IMAGE_NATIVE FALSE -// #define GDISP_NEED_IMAGE_GIF FALSE -// #define GDISP_NEED_IMAGE_BMP FALSE -// #define GDISP_NEED_IMAGE_BMP_1 FALSE -// #define GDISP_NEED_IMAGE_BMP_4 FALSE -// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE -// #define GDISP_NEED_IMAGE_BMP_8 FALSE -// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE -// #define GDISP_NEED_IMAGE_BMP_16 FALSE -// #define GDISP_NEED_IMAGE_BMP_24 FALSE -// #define GDISP_NEED_IMAGE_BMP_32 FALSE -// #define GDISP_NEED_IMAGE_JPG FALSE -// #define GDISP_NEED_IMAGE_PNG FALSE -// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE -#ifdef EMULATOR -#define GDISP_NEED_PIXMAP TRUE -#endif -// #define GDISP_NEED_PIXMAP_IMAGE FALSE - -//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used. -//#define GDISP_LINEBUF_SIZE 128 -//#define GDISP_STARTUP_COLOR Black -#define GDISP_NEED_STARTUP_LOGO FALSE - -//#define GDISP_TOTAL_DISPLAYS 2 - -#ifndef EMULATOR -#define GDISP_DRIVER_LIST GDISPVMT_ST7565_ERGODOX, GDISPVMT_IS31FL3731C_ERGODOX -#else -#define GDISP_DRIVER_LIST GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX -#endif - - #ifdef GDISP_DRIVER_LIST - // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability - #define GDISP_HARDWARE_STREAM_WRITE FALSE - #define GDISP_HARDWARE_STREAM_READ FALSE - #define GDISP_HARDWARE_STREAM_POS FALSE - #define GDISP_HARDWARE_DRAWPIXEL TRUE - #define GDISP_HARDWARE_CLEARS FALSE - #define GDISP_HARDWARE_FILLS FALSE - #define GDISP_HARDWARE_BITFILLS FALSE - #define GDISP_HARDWARE_SCROLL FALSE - #define GDISP_HARDWARE_PIXELREAD TRUE - #define GDISP_HARDWARE_CONTROL TRUE - #define GDISP_HARDWARE_QUERY FALSE - #define GDISP_HARDWARE_CLIP FALSE - - #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 - #endif - -// The custom format is not defined for some reason, so define it as error -// so we don't get compiler warnings -#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR - -#define GDISP_USE_GFXNET FALSE -// #define GDISP_GFXNET_PORT 13001 -// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE -// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE -// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GWIN // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GWIN FALSE - -//#define GWIN_NEED_WINDOWMANAGER FALSE -// #define GWIN_REDRAW_IMMEDIATE FALSE -// #define GWIN_REDRAW_SINGLEOP FALSE -// #define GWIN_NEED_FLASHING FALSE -// #define GWIN_FLASHING_PERIOD 250 - -//#define GWIN_NEED_CONSOLE FALSE -// #define GWIN_CONSOLE_USE_HISTORY FALSE -// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE -// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE -// #define GWIN_CONSOLE_ESCSEQ FALSE -// #define GWIN_CONSOLE_USE_BASESTREAM FALSE -// #define GWIN_CONSOLE_USE_FLOAT FALSE -//#define GWIN_NEED_GRAPH FALSE -//#define GWIN_NEED_GL3D FALSE - -//#define GWIN_NEED_WIDGET FALSE -//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1 -// #define GWIN_NEED_LABEL FALSE -// #define GWIN_LABEL_ATTRIBUTE FALSE -// #define GWIN_NEED_BUTTON FALSE -// #define GWIN_BUTTON_LAZY_RELEASE FALSE -// #define GWIN_NEED_SLIDER FALSE -// #define GWIN_SLIDER_NOSNAP FALSE -// #define GWIN_SLIDER_DEAD_BAND 5 -// #define GWIN_SLIDER_TOGGLE_INC 20 -// #define GWIN_NEED_CHECKBOX FALSE -// #define GWIN_NEED_IMAGE FALSE -// #define GWIN_NEED_IMAGE_ANIMATION FALSE -// #define GWIN_NEED_RADIO FALSE -// #define GWIN_NEED_LIST FALSE -// #define GWIN_NEED_LIST_IMAGES FALSE -// #define GWIN_NEED_PROGRESSBAR FALSE -// #define GWIN_PROGRESSBAR_AUTO FALSE -// #define GWIN_NEED_KEYBOARD FALSE -// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1 -// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE -// #define GWIN_NEED_TEXTEDIT FALSE -// #define GWIN_FLAT_STYLING FALSE -// #define GWIN_WIDGET_TAGS FALSE - -//#define GWIN_NEED_CONTAINERS FALSE -// #define GWIN_NEED_CONTAINER FALSE -// #define GWIN_NEED_FRAME FALSE -// #define GWIN_NEED_TABSET FALSE -// #define GWIN_TABSET_TABHEIGHT 18 - - -/////////////////////////////////////////////////////////////////////////// -// GEVENT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GEVENT TRUE - -//#define GEVENT_ASSERT_NO_RESOURCE FALSE -//#define GEVENT_MAXIMUM_SIZE 32 -//#define GEVENT_MAX_SOURCE_LISTENERS 32 - - -/////////////////////////////////////////////////////////////////////////// -// GTIMER // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GTIMER FALSE - -//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY -//#define GTIMER_THREAD_WORKAREA_SIZE 2048 - - -/////////////////////////////////////////////////////////////////////////// -// GQUEUE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GQUEUE FALSE - -//#define GQUEUE_NEED_ASYNC FALSE -//#define GQUEUE_NEED_GSYNC FALSE -//#define GQUEUE_NEED_FSYNC FALSE -//#define GQUEUE_NEED_BUFFERS FALSE - -/////////////////////////////////////////////////////////////////////////// -// GINPUT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GINPUT FALSE - -//#define GINPUT_NEED_MOUSE FALSE -// #define GINPUT_TOUCH_STARTRAW FALSE -// #define GINPUT_TOUCH_NOTOUCH FALSE -// #define GINPUT_TOUCH_NOCALIBRATE FALSE -// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE -// #define GINPUT_MOUSE_POLL_PERIOD 25 -// #define GINPUT_MOUSE_CLICK_TIME 300 -// #define GINPUT_TOUCH_CXTCLICK_TIME 700 -// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE -// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE -// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32 -//#define GINPUT_NEED_KEYBOARD FALSE -// #define GINPUT_KEYBOARD_POLL_PERIOD 200 -// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32 -// #define GKEYBOARD_LAYOUT_OFF FALSE -// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE -//#define GINPUT_NEED_TOGGLE FALSE -//#define GINPUT_NEED_DIAL FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GFILE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GFILE FALSE - -//#define GFILE_NEED_PRINTG FALSE -//#define GFILE_NEED_SCANG FALSE -//#define GFILE_NEED_STRINGS FALSE -//#define GFILE_NEED_FILELISTS FALSE -//#define GFILE_NEED_STDIO FALSE -//#define GFILE_NEED_NOAUTOMOUNT FALSE -//#define GFILE_NEED_NOAUTOSYNC FALSE - -//#define GFILE_NEED_MEMFS FALSE -//#define GFILE_NEED_ROMFS FALSE -//#define GFILE_NEED_RAMFS FALSE -//#define GFILE_NEED_FATFS FALSE -//#define GFILE_NEED_NATIVEFS FALSE -//#define GFILE_NEED_CHBIOSFS FALSE - -//#define GFILE_ALLOW_FLOATS FALSE -//#define GFILE_ALLOW_DEVICESPECIFIC FALSE -//#define GFILE_MAX_GFILES 3 - -/////////////////////////////////////////////////////////////////////////// -// GADC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GADC FALSE - -//#define GADC_MAX_LOWSPEED_DEVICES 4 - - -/////////////////////////////////////////////////////////////////////////// -// GAUDIO // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GAUDIO FALSE -// There seems to be a bug in the ugfx code, the wrong define is used -// So define it in order to avoid warnings -#define GFX_USE_GAUDIN GFX_USE_GAUDIO -// #define GAUDIO_NEED_PLAY FALSE -// #define GAUDIO_NEED_RECORD FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GMISC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GMISC TRUE - -//#define GMISC_NEED_ARRAYOPS FALSE -//#define GMISC_NEED_FASTTRIG FALSE -//#define GMISC_NEED_FIXEDTRIG FALSE -//#define GMISC_NEED_INVSQRT FALSE -// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE -// #define GMISC_INVSQRT_REAL_SLOW FALSE -#define GMISC_NEED_MATRIXFLOAT2D TRUE -#define GMISC_NEED_MATRIXFIXED2D FALSE - -#endif /* _GFXCONF_H */ diff --git a/keyboards/infinity_ergodox/halconf.h b/keyboards/infinity_ergodox/halconf.h deleted file mode 100644 index 55dd5e88da..0000000000 --- a/keyboards/infinity_ergodox/halconf.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 128 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/keyboards/infinity_ergodox/infinity_ergodox.c b/keyboards/infinity_ergodox/infinity_ergodox.c deleted file mode 100644 index 87ed40fabf..0000000000 --- a/keyboards/infinity_ergodox/infinity_ergodox.c +++ /dev/null @@ -1,76 +0,0 @@ -#include "infinity_ergodox.h" -#include "ch.h" -#include "hal.h" -#include "serial_link/system/serial_link.h" -#include "lcd_backlight.h" - -void init_serial_link_hal(void) { - PORTA->PCR[1] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(2); - PORTA->PCR[2] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(2); - PORTE->PCR[0] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(3); - PORTE->PCR[1] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(3); -} - -#define RED_PIN 1 -#define GREEN_PIN 2 -#define BLUE_PIN 3 -#define CHANNEL_RED FTM0->CHANNEL[0] -#define CHANNEL_GREEN FTM0->CHANNEL[1] -#define CHANNEL_BLUE FTM0->CHANNEL[2] - -#define RGB_PORT PORTC -#define RGB_PORT_GPIO GPIOC - -// Base FTM clock selection (72 MHz system clock) -// @ 0xFFFF period, 72 MHz / (0xFFFF * 2) = Actual period -// Higher pre-scalar will use the most power (also look the best) -// Pre-scalar calculations -// 0 - 72 MHz -> 549 Hz -// 1 - 36 MHz -> 275 Hz -// 2 - 18 MHz -> 137 Hz -// 3 - 9 MHz -> 69 Hz (Slightly visible flicker) -// 4 - 4 500 kHz -> 34 Hz (Visible flickering) -// 5 - 2 250 kHz -> 17 Hz -// 6 - 1 125 kHz -> 9 Hz -// 7 - 562 500 Hz -> 4 Hz -// Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced -// Which will reduce the brightness range -#define PRESCALAR_DEFINE 0 - -void lcd_backlight_hal_init(void) { - // Setup Backlight - SIM->SCGC6 |= SIM_SCGC6_FTM0; - FTM0->CNT = 0; // Reset counter - - // PWM Period - // 16-bit maximum - FTM0->MOD = 0xFFFF; - - // Set FTM to PWM output - Edge Aligned, Low-true pulses -#define CNSC_MODE FTM_SC_CPWMS | FTM_SC_PS(4) | FTM_SC_CLKS(0) - CHANNEL_RED.CnSC = CNSC_MODE; - CHANNEL_GREEN.CnSC = CNSC_MODE; - CHANNEL_BLUE.CnSC = CNSC_MODE; - - // System clock, /w prescalar setting - FTM0->SC = FTM_SC_CLKS(1) | FTM_SC_PS(PRESCALAR_DEFINE); - - CHANNEL_RED.CnV = 0; - CHANNEL_GREEN.CnV = 0; - CHANNEL_BLUE.CnV = 0; - - RGB_PORT_GPIO->PDDR |= (1 << RED_PIN); - RGB_PORT_GPIO->PDDR |= (1 << GREEN_PIN); - RGB_PORT_GPIO->PDDR |= (1 << BLUE_PIN); - -#define RGB_MODE PORTx_PCRn_SRE | PORTx_PCRn_DSE | PORTx_PCRn_MUX(4) - RGB_PORT->PCR[RED_PIN] = RGB_MODE; - RGB_PORT->PCR[GREEN_PIN] = RGB_MODE; - RGB_PORT->PCR[BLUE_PIN] = RGB_MODE; -} - -void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { - CHANNEL_RED.CnV = r; - CHANNEL_GREEN.CnV = g; - CHANNEL_BLUE.CnV = b; -} diff --git a/keyboards/infinity_ergodox/infinity_ergodox.h b/keyboards/infinity_ergodox/infinity_ergodox.h deleted file mode 100644 index de72675946..0000000000 --- a/keyboards/infinity_ergodox/infinity_ergodox.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_ -#define KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_ - -#include "quantum.h" - -#define KEYMAP( \ - A80, A70, A60, A50, A40, A30, A20, \ - A81, A71, A61, A51, A41, A31, A21, \ - A82, A72, A62, A52, A42, A32, \ - A83, A73, A63, A53, A43, A33, A23, \ - A84, A74, A64, A54, A44, \ - A13, A03, \ - A04, \ - A34, A24, A14, \ - B20, B30, B40, B50, B60, B70, B80, \ - B21, B31, B41, B51, B61, B71, B81, \ - B32, B42, B52, B62, B72, B82, \ - B23, B33, B43, B53, B63, B73, B83, \ - B44, B54, B64, B74, B84, \ - B03, B13, \ - B04, \ - B14, B24, B34 \ -) { \ - { KC_NO, KC_NO, KC_NO, KC_##A03, KC_##A04 }, \ - { KC_NO, KC_NO, KC_NO, KC_##A13, KC_##A14 }, \ - { KC_##A20, KC_##A21, KC_NO, KC_##A23, KC_##A24 }, \ - { KC_##A30, KC_##A31, KC_##A32, KC_##A33, KC_##A34 }, \ - { KC_##A40, KC_##A41, KC_##A42, KC_##A43, KC_##A44 }, \ - { KC_##A50, KC_##A51, KC_##A52, KC_##A53, KC_##A54 }, \ - { KC_##A60, KC_##A61, KC_##A62, KC_##A63, KC_##A64 }, \ - { KC_##A70, KC_##A71, KC_##A72, KC_##A73, KC_##A74 }, \ - { KC_##A80, KC_##A81, KC_##A82, KC_##A83, KC_##A84 }, \ - { KC_NO, KC_NO, KC_NO, KC_##B03, KC_##B04 }, \ - { KC_NO, KC_NO, KC_NO, KC_##B13, KC_##B14 }, \ - { KC_##B20, KC_##B21, KC_NO, KC_##B23, KC_##B24 }, \ - { KC_##B30, KC_##B31, KC_##B32, KC_##B33, KC_##B34 }, \ - { KC_##B40, KC_##B41, KC_##B42, KC_##B43, KC_##B44 }, \ - { KC_##B50, KC_##B51, KC_##B52, KC_##B53, KC_##B54 }, \ - { KC_##B60, KC_##B61, KC_##B62, KC_##B63, KC_##B64 }, \ - { KC_##B70, KC_##B71, KC_##B72, KC_##B73, KC_##B74 }, \ - { KC_##B80, KC_##B81, KC_##B82, KC_##B83, KC_##B84 } \ -} - -#endif /* KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_ */ diff --git a/keyboards/infinity_ergodox/keymaps/default/keymap.c b/keyboards/infinity_ergodox/keymaps/default/keymap.c deleted file mode 100644 index f1e6b1c8ae..0000000000 --- a/keyboards/infinity_ergodox/keymaps/default/keymap.c +++ /dev/null @@ -1,114 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> -Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "infinity_ergodox.h" - -// Workaround for old keymap format -#define KC_RESET RESET - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - KEYMAP( // layer 0 : default - // left hand - EQL, 1, 2, 3, 4, 5, ESC, - BSLS,Q, W, E, R, T, FN1, - TAB, A, S, D, F, G, - LSFT,Z, X, C, V, B, FN0, - LGUI,GRV, BSLS,LEFT,RGHT, - LCTL,LALT, - HOME, - BSPC,DEL, END, - // right hand - FN2, 6, 7, 8, 9, 0, MINS, - LBRC,Y, U, I, O, P, RBRC, - H, J, K, L, SCLN,QUOT, - FN0, N, M, COMM,DOT, SLSH,RSFT, - LEFT,DOWN,UP, RGHT,RGUI, - RALT,RCTL, - PGUP, - PGDN,ENT, SPC - ), - - KEYMAP( // layer 1 : function and symbol keys - // left hand - TRNS,F1, F2, F3, F4, F5, F11, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN3, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS, - TRNS, - TRNS,TRNS,TRNS, - // right hand - F12, F6, F7, F8, F9, F10, TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS, - TRNS, - TRNS,TRNS,TRNS - ), - - KEYMAP( // layer 2 : keyboard functions - // left hand - RESET,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, FN3, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS, - TRNS, - TRNS,TRNS,TRNS, - // right hand - TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS, - TRNS, - TRNS,TRNS,TRNS - ), - - KEYMAP( // layer 3: numpad - // left hand - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS,TRNS,TRNS,TRNS, - TRNS,TRNS, - TRNS, - TRNS,TRNS,TRNS, - // right hand - TRNS,NLCK,PSLS,PAST,PAST,PMNS,BSPC, - TRNS,NO, P7, P8, P9, PMNS,BSPC, - NO, P4, P5, P6, PPLS,PENT, - TRNS,NO, P1, P2, P3, PPLS,PENT, - P0, PDOT,SLSH,PENT,PENT, - TRNS,TRNS, - TRNS, - TRNS,TRNS,TRNS - ), -}; -const uint16_t fn_actions[] = { - ACTION_LAYER_MOMENTARY(1), // FN0 - switch to Layer1 - ACTION_LAYER_SET(2, ON_PRESS), // FN1 - set Layer2 - ACTION_LAYER_TOGGLE(3), // FN2 - toggle Layer3 aka Numpad layer - ACTION_LAYER_SET(0, ON_PRESS), // FN3 - set Layer0 -}; diff --git a/keyboards/infinity_ergodox/keymaps/default/visualizer.c b/keyboards/infinity_ergodox/keymaps/default/visualizer.c deleted file mode 100644 index c0d335ce6a..0000000000 --- a/keyboards/infinity_ergodox/keymaps/default/visualizer.c +++ /dev/null @@ -1,168 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -// Currently we are assuming that both the backlight and LCD are enabled -// But it's entirely possible to write a custom visualizer that use only -// one of them -#ifndef LCD_BACKLIGHT_ENABLE -#error This visualizer needs that LCD backlight is enabled -#endif - -#ifndef LCD_ENABLE -#error This visualizer needs that LCD is enabled -#endif - -#include "visualizer.h" -#include "led_test.h" - -static const char* welcome_text[] = {"TMK", "Infinity Ergodox"}; - -// Just an example how to write custom keyframe functions, we could have moved -// all this into the init function -bool display_welcome(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - // Read the uGFX documentation for information how to use the displays - // http://wiki.ugfx.org/index.php/Main_Page - gdispClear(White); - // You can use static variables for things that can't be found in the animation - // or state structs - gdispDrawString(0, 3, welcome_text[0], state->font_dejavusansbold12, Black); - gdispDrawString(0, 15, welcome_text[1], state->font_dejavusansbold12, Black); - // Always remember to flush the display - gdispFlush(); - // you could set the backlight color as well, but we won't do it here, since - // it's part of the following animation - // lcd_backlight_color(hue, saturation, intensity); - // We don't need constant updates, just drawing the screen once is enough - return false; -} - -// Feel free to modify the animations below, or even add new ones if needed - -// Don't worry, if the startup animation is long, you can use the keyboard like normal -// during that time -static keyframe_animation_t startup_animation = { - .num_frames = 4, - .loop = false, - .frame_lengths = {0, gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(5000), 0}, - .frame_functions = { - display_welcome, - keyframe_animate_backlight_color, - keyframe_no_operation, - enable_visualization - }, -}; - -// The color animation animates the LCD color when you change layers -static keyframe_animation_t color_animation = { - .num_frames = 2, - .loop = false, - // Note that there's a 200 ms no-operation frame, - // this prevents the color from changing when activating the layer - // momentarily - .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)}, - .frame_functions = {keyframe_no_operation, keyframe_animate_backlight_color}, -}; - -// The LCD animation alternates between the layer name display and a -// bitmap that displays all active layers -static keyframe_animation_t lcd_animation = { - .num_frames = 2, - .loop = true, - .frame_lengths = {gfxMillisecondsToTicks(2000), gfxMillisecondsToTicks(2000)}, - .frame_functions = {keyframe_display_layer_text, keyframe_display_layer_bitmap}, -}; - -static keyframe_animation_t suspend_animation = { - .num_frames = 3, - .loop = false, - .frame_lengths = {0, gfxMillisecondsToTicks(1000), 0}, - .frame_functions = { - keyframe_display_layer_text, - keyframe_animate_backlight_color, - keyframe_disable_lcd_and_backlight, - }, -}; - -static keyframe_animation_t resume_animation = { - .num_frames = 5, - .loop = false, - .frame_lengths = {0, 0, gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(5000), 0}, - .frame_functions = { - keyframe_enable_lcd_and_backlight, - display_welcome, - keyframe_animate_backlight_color, - keyframe_no_operation, - enable_visualization, - }, -}; - -void initialize_user_visualizer(visualizer_state_t* state) { - // The brightness will be dynamically adjustable in the future - // But for now, change it here. - lcd_backlight_brightness(0x50); - state->current_lcd_color = LCD_COLOR(0x00, 0x00, 0xFF); - state->target_lcd_color = LCD_COLOR(0x10, 0xFF, 0xFF); - start_keyframe_animation(&startup_animation); - start_keyframe_animation(&led_test_animation); -} - -void update_user_visualizer_state(visualizer_state_t* state) { - // Add more tests, change the colors and layer texts here - // Usually you want to check the high bits (higher layers first) - // because that's the order layers are processed for keypresses - // You can for check for example: - // state->status.layer - // state->status.default_layer - // state->status.leds (see led.h for available statuses) - if (state->status.layer & 0x8) { - state->target_lcd_color = LCD_COLOR(0xC0, 0xB0, 0xFF); - state->layer_text = "Numpad"; - } - else if (state->status.layer & 0x4) { - state->target_lcd_color = LCD_COLOR(0, 0xB0, 0xFF); - state->layer_text = "KBD functions"; - } - else if (state->status.layer & 0x2) { - state->target_lcd_color = LCD_COLOR(0x80, 0xB0, 0xFF); - state->layer_text = "Function keys"; - } - else { - state->target_lcd_color = LCD_COLOR(0x40, 0xB0, 0xFF); - state->layer_text = "Default"; - } - // You can also stop existing animations, and start your custom ones here - // remember that you should normally have only one animation for the LCD - // and one for the background. But you can also combine them if you want. - start_keyframe_animation(&lcd_animation); - start_keyframe_animation(&color_animation); -} - -void user_visualizer_suspend(visualizer_state_t* state) { - state->layer_text = "Suspending..."; - uint8_t hue = LCD_HUE(state->current_lcd_color); - uint8_t sat = LCD_SAT(state->current_lcd_color); - state->target_lcd_color = LCD_COLOR(hue, sat, 0); - start_keyframe_animation(&suspend_animation); -} - -void user_visualizer_resume(visualizer_state_t* state) { - state->current_lcd_color = LCD_COLOR(0x00, 0x00, 0x00); - state->target_lcd_color = LCD_COLOR(0x10, 0xFF, 0xFF); - start_keyframe_animation(&resume_animation); - start_keyframe_animation(&led_test_animation); -} diff --git a/keyboards/infinity_ergodox/led.c b/keyboards/infinity_ergodox/led.c deleted file mode 100644 index 77195bb358..0000000000 --- a/keyboards/infinity_ergodox/led.c +++ /dev/null @@ -1,49 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "hal.h" - -#include "led.h" - - -void led_set(uint8_t usb_led) { -// The LCD backlight functionality conflicts with this simple -// red backlight -#if !defined(LCD_BACKLIGHT_ENABLE) && defined(STATUS_LED_ENABLE) - // PTC1: LCD Backlight Red(0:on/1:off) - GPIOC->PDDR |= (1<<1); - PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - GPIOC->PCOR |= (1<<1); - } else { - GPIOC->PSOR |= (1<<1); - } -#elif !defined(LCD_BACKLIGHT_ENABLE) - (void)usb_led; - GPIOC->PDDR |= (1<<1); - PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - GPIOC->PSOR |= (1<<1); - GPIOC->PDDR |= (1<<2); - PORTC->PCR[2] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - GPIOC->PSOR |= (1<<2); - GPIOC->PDDR |= (1<<3); - PORTC->PCR[3] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - GPIOC->PSOR |= (1<<3); -#else - (void)usb_led; -#endif -} diff --git a/keyboards/infinity_ergodox/matrix.c b/keyboards/infinity_ergodox/matrix.c deleted file mode 100644 index 2b806cd649..0000000000 --- a/keyboards/infinity_ergodox/matrix.c +++ /dev/null @@ -1,169 +0,0 @@ -/* -Copyright 2016 Fred Sundvik <fsundvik@gmail.com> -Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ -#include <stdint.h> -#include <stdbool.h> -#include <string.h> -#include "hal.h" -#include "timer.h" -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "matrix.h" - - -/* - * Infinity ErgoDox Pinusage: - * Column pins are input with internal pull-down. Row pins are output and strobe with high. - * Key is high or 1 when it turns on. - * - * col: { PTD1, PTD4, PTD5, PTD6, PTD7 } - * row: { PTB2, PTB3, PTB18, PTB19, PTC0, PTC9, PTC10, PTC11, PTD0 } - */ -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[LOCAL_MATRIX_ROWS]; -static bool debouncing = false; -static uint16_t debouncing_time = 0; - - -void matrix_init(void) -{ - /* Column(sense) */ - palSetPadMode(GPIOD, 1, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOD, 4, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOD, 5, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOD, 6, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOD, 7, PAL_MODE_INPUT_PULLDOWN); - - /* Row(strobe) */ - palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 18, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 19, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOC, 9, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOC, 10, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOC, 11, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOD, 0, PAL_MODE_OUTPUT_PUSHPULL); - - memset(matrix, 0, MATRIX_ROWS); - memset(matrix_debouncing, 0, LOCAL_MATRIX_ROWS); -} - -uint8_t matrix_scan(void) -{ - for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) { - matrix_row_t data = 0; - - // strobe row - switch (row) { - case 0: palSetPad(GPIOB, 2); break; - case 1: palSetPad(GPIOB, 3); break; - case 2: palSetPad(GPIOB, 18); break; - case 3: palSetPad(GPIOB, 19); break; - case 4: palSetPad(GPIOC, 0); break; - case 5: palSetPad(GPIOC, 9); break; - case 6: palSetPad(GPIOC, 10); break; - case 7: palSetPad(GPIOC, 11); break; - case 8: palSetPad(GPIOD, 0); break; - } - - // need wait to settle pin state - // if you wait too short, or have a too high update rate - // the keyboard might freeze, or there might not be enough - // processing power to update the LCD screen properly. - // 20us, or two ticks at 100000Hz seems to be OK - wait_us(20); - - // read col data: { PTD1, PTD4, PTD5, PTD6, PTD7 } - data = ((palReadPort(GPIOD) & 0xF0) >> 3) | - ((palReadPort(GPIOD) & 0x02) >> 1); - - // un-strobe row - switch (row) { - case 0: palClearPad(GPIOB, 2); break; - case 1: palClearPad(GPIOB, 3); break; - case 2: palClearPad(GPIOB, 18); break; - case 3: palClearPad(GPIOB, 19); break; - case 4: palClearPad(GPIOC, 0); break; - case 5: palClearPad(GPIOC, 9); break; - case 6: palClearPad(GPIOC, 10); break; - case 7: palClearPad(GPIOC, 11); break; - case 8: palClearPad(GPIOD, 0); break; - } - - if (matrix_debouncing[row] != data) { - matrix_debouncing[row] = data; - debouncing = true; - debouncing_time = timer_read(); - } - } - - uint8_t offset = 0; -#ifdef MASTER_IS_ON_RIGHT - if (is_serial_link_master()) { - offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS; - } -#endif - - if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { - for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) { - matrix[offset + row] = matrix_debouncing[row]; - } - debouncing = false; - } - return 1; -} - -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & (1<<col)); -} - -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - xprintf("\nr/c 01234567\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - xprintf("%X0: ", row); - matrix_row_t data = matrix_get_row(row); - for (int col = 0; col < MATRIX_COLS; col++) { - if (data & (1<<col)) - xprintf("1"); - else - xprintf("0"); - } - xprintf("\n"); - } -} - -void matrix_set_remote(matrix_row_t* rows, uint8_t index) { - uint8_t offset = 0; -#ifdef MASTER_IS_ON_RIGHT - offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS * (index + 2); -#else - offset = LOCAL_MATRIX_ROWS * (index + 1); -#endif - for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) { - matrix[offset + row] = rows[row]; - } -} diff --git a/keyboards/infinity_ergodox/mcuconf.h b/keyboards/infinity_ergodox/mcuconf.h deleted file mode 100644 index f6730b99ca..0000000000 --- a/keyboards/infinity_ergodox/mcuconf.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _MCUCONF_H_ -#define _MCUCONF_H_ - -#define K20x_MCUCONF - -/* - * HAL driver system settings. - */ - -#define K20x7 - -/* Select the MCU clocking mode below by enabling the appropriate block. */ - -#define KINETIS_NO_INIT FALSE - -/* PEE mode - 48MHz system clock driven by external crystal. */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE -#define KINETIS_PLLCLK_FREQUENCY 72000000UL -#define KINETIS_SYSCLK_FREQUENCY 72000000UL -#define KINETIS_BUSCLK_FREQUENCY 36000000UL -#define KINETIS_FLASHCLK_FREQUENCY 24000000UL - -#if 0 -/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ -#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI -#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ -#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ -#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ -#define KINETIS_CLKDIV1_OUTDIV1 1 -#define KINETIS_CLKDIV1_OUTDIV2 1 -#define KINETIS_CLKDIV1_OUTDIV4 2 -#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY -#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 -#endif - -/* - * SERIAL driver system settings. - */ -#define KINETIS_SERIAL_USE_UART0 TRUE -#define KINETIS_SERIAL_USE_UART1 TRUE - -/* - * USB driver settings - */ -#define KINETIS_USB_USE_USB0 TRUE -/* Need to redefine this, since the default is for K20x */ -/* This is for Teensy LC; you should comment it out (or change to 5) - * for Teensy 3.x */ -#define KINETIS_USB_USB0_IRQ_PRIORITY 2 - -/* - * SPI driver system settings. - */ -#define KINETIS_SPI_USE_SPI0 TRUE - -#define KINETIS_I2C_USE_I2C0 TRUE - -#endif /* _MCUCONF_H_ */ |