Move USB Host Shield and Arduino core to `lib/` (#13973)

1 files changed, 0 insertions, 141 deletions

diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PS3Enums.h b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PS3Enums.h
deleted file mode 100644
index 77801945f2..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PS3Enums.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved.
-
- This software may be distributed and modified under the terms of the GNU
- General Public License version 2 (GPL2) as published by the Free Software
- Foundation and appearing in the file GPL2.TXT included in the packaging of
- this file. Please note that GPL2 Section 2[b] requires that all works based
- on this software must also be made publicly available under the terms of
- the GPL2 ("Copyleft").
-
- Contact information
- -------------------
-
- Kristian Lauszus, TKJ Electronics
- Web      :  http://www.tkjelectronics.com
- e-mail   :  kristianl@tkjelectronics.com
- */
-
-#ifndef _ps3enums_h
-#define _ps3enums_h
-
-#include "controllerEnums.h"
-
-/** Size of the output report buffer for the Dualshock and Navigation controllers */
-#define PS3_REPORT_BUFFER_SIZE  48
-
-/** Report buffer for all PS3 commands */
-const uint8_t PS3_REPORT_BUFFER[PS3_REPORT_BUFFER_SIZE] PROGMEM = {
-        0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00,
-        0xff, 0x27, 0x10, 0x00, 0x32,
-        0xff, 0x27, 0x10, 0x00, 0x32,
-        0xff, 0x27, 0x10, 0x00, 0x32,
-        0xff, 0x27, 0x10, 0x00, 0x32,
-        0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-/** Size of the output report buffer for the Move Controller */
-#define MOVE_REPORT_BUFFER_SIZE 7
-
-/** Used to set the LEDs on the controllers */
-const uint8_t PS3_LEDS[] PROGMEM = {
-        0x00, // OFF
-        0x01, // LED1
-        0x02, // LED2
-        0x04, // LED3
-        0x08, // LED4
-
-        0x09, // LED5
-        0x0A, // LED6
-        0x0C, // LED7
-        0x0D, // LED8
-        0x0E, // LED9
-        0x0F, // LED10
-};
-
-/**
- * Buttons on the controllers.
- * <B>Note:</B> that the location is shifted 9 when it's connected via USB.
- */
-const uint32_t PS3_BUTTONS[] PROGMEM = {
-        0x10, // UP
-        0x20, // RIGHT
-        0x40, // DOWN
-        0x80, // LEFT
-
-        0x01, // SELECT
-        0x08, // START
-        0x02, // L3
-        0x04, // R3
-
-        0x0100, // L2
-        0x0200, // R2
-        0x0400, // L1
-        0x0800, // R1
-
-        0x1000, // TRIANGLE
-        0x2000, // CIRCLE
-        0x4000, // CROSS
-        0x8000, // SQUARE
-
-        0x010000, // PS
-        0x080000, // MOVE - covers 12 bits - we only need to read the top 8
-        0x100000, // T - covers 12 bits - we only need to read the top 8
-};
-
-/**
- * Analog buttons on the controllers.
- * <B>Note:</B> that the location is shifted 9 when it's connected via USB.
- */
-const uint8_t PS3_ANALOG_BUTTONS[] PROGMEM = {
-        23, // UP_ANALOG
-        24, // RIGHT_ANALOG
-        25, // DOWN_ANALOG
-        26, // LEFT_ANALOG
-        0, 0, 0, 0, // Skip SELECT, L3, R3 and START
-
-        27, // L2_ANALOG
-        28, // R2_ANALOG
-        29, // L1_ANALOG
-        30, // R1_ANALOG
-        31, // TRIANGLE_ANALOG
-        32, // CIRCLE_ANALOG
-        33, // CROSS_ANALOG
-        34, // SQUARE_ANALOG
-        0, 0, // Skip PS and MOVE
-
-        // Playstation Move Controller
-        15, // T_ANALOG - Both at byte 14 (last reading) and byte 15 (current reading)
-};
-
-enum StatusEnum {
-        // Note that the location is shifted 9 when it's connected via USB
-        // Byte location | bit location
-        Plugged = (38 << 8) | 0x02,
-        Unplugged = (38 << 8) | 0x03,
-
-        Charging = (39 << 8) | 0xEE,
-        NotCharging = (39 << 8) | 0xF1,
-        Shutdown = (39 << 8) | 0x01,
-        Dying = (39 << 8) | 0x02,
-        Low = (39 << 8) | 0x03,
-        High = (39 << 8) | 0x04,
-        Full = (39 << 8) | 0x05,
-
-        MoveCharging = (21 << 8) | 0xEE,
-        MoveNotCharging = (21 << 8) | 0xF1,
-        MoveShutdown = (21 << 8) | 0x01,
-        MoveDying = (21 << 8) | 0x02,
-        MoveLow = (21 << 8) | 0x03,
-        MoveHigh = (21 << 8) | 0x04,
-        MoveFull = (21 << 8) | 0x05,
-
-        CableRumble = (40 << 8) | 0x10, // Operating by USB and rumble is turned on
-        Cable = (40 << 8) | 0x12, // Operating by USB and rumble is turned off
-        BluetoothRumble = (40 << 8) | 0x14, // Operating by Bluetooth and rumble is turned on
-        Bluetooth = (40 << 8) | 0x16, // Operating by Bluetooth and rumble is turned off
-};
-
-#endif