From b16091659cc9a724a8800f77e631643b4ab089ad Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 18 Aug 2021 18:20:25 +1000 Subject: Move USB Host Shield and Arduino core to `lib/` (#13973) --- .../usb_hid/USB_Host_Shield_2.0/PS3Enums.h | 141 --------------------- 1 file changed, 141 deletions(-) delete mode 100644 tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PS3Enums.h (limited to 'tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PS3Enums.h') diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PS3Enums.h b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PS3Enums.h deleted file mode 100644 index 77801945f2..0000000000 --- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PS3Enums.h +++ /dev/null @@ -1,141 +0,0 @@ -/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved. - - This software may be distributed and modified under the terms of the GNU - General Public License version 2 (GPL2) as published by the Free Software - Foundation and appearing in the file GPL2.TXT included in the packaging of - this file. Please note that GPL2 Section 2[b] requires that all works based - on this software must also be made publicly available under the terms of - the GPL2 ("Copyleft"). - - Contact information - ------------------- - - Kristian Lauszus, TKJ Electronics - Web : http://www.tkjelectronics.com - e-mail : kristianl@tkjelectronics.com - */ - -#ifndef _ps3enums_h -#define _ps3enums_h - -#include "controllerEnums.h" - -/** Size of the output report buffer for the Dualshock and Navigation controllers */ -#define PS3_REPORT_BUFFER_SIZE 48 - -/** Report buffer for all PS3 commands */ -const uint8_t PS3_REPORT_BUFFER[PS3_REPORT_BUFFER_SIZE] PROGMEM = { - 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, - 0xff, 0x27, 0x10, 0x00, 0x32, - 0xff, 0x27, 0x10, 0x00, 0x32, - 0xff, 0x27, 0x10, 0x00, 0x32, - 0xff, 0x27, 0x10, 0x00, 0x32, - 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -/** Size of the output report buffer for the Move Controller */ -#define MOVE_REPORT_BUFFER_SIZE 7 - -/** Used to set the LEDs on the controllers */ -const uint8_t PS3_LEDS[] PROGMEM = { - 0x00, // OFF - 0x01, // LED1 - 0x02, // LED2 - 0x04, // LED3 - 0x08, // LED4 - - 0x09, // LED5 - 0x0A, // LED6 - 0x0C, // LED7 - 0x0D, // LED8 - 0x0E, // LED9 - 0x0F, // LED10 -}; - -/** - * Buttons on the controllers. - * Note: that the location is shifted 9 when it's connected via USB. - */ -const uint32_t PS3_BUTTONS[] PROGMEM = { - 0x10, // UP - 0x20, // RIGHT - 0x40, // DOWN - 0x80, // LEFT - - 0x01, // SELECT - 0x08, // START - 0x02, // L3 - 0x04, // R3 - - 0x0100, // L2 - 0x0200, // R2 - 0x0400, // L1 - 0x0800, // R1 - - 0x1000, // TRIANGLE - 0x2000, // CIRCLE - 0x4000, // CROSS - 0x8000, // SQUARE - - 0x010000, // PS - 0x080000, // MOVE - covers 12 bits - we only need to read the top 8 - 0x100000, // T - covers 12 bits - we only need to read the top 8 -}; - -/** - * Analog buttons on the controllers. - * Note: that the location is shifted 9 when it's connected via USB. - */ -const uint8_t PS3_ANALOG_BUTTONS[] PROGMEM = { - 23, // UP_ANALOG - 24, // RIGHT_ANALOG - 25, // DOWN_ANALOG - 26, // LEFT_ANALOG - 0, 0, 0, 0, // Skip SELECT, L3, R3 and START - - 27, // L2_ANALOG - 28, // R2_ANALOG - 29, // L1_ANALOG - 30, // R1_ANALOG - 31, // TRIANGLE_ANALOG - 32, // CIRCLE_ANALOG - 33, // CROSS_ANALOG - 34, // SQUARE_ANALOG - 0, 0, // Skip PS and MOVE - - // Playstation Move Controller - 15, // T_ANALOG - Both at byte 14 (last reading) and byte 15 (current reading) -}; - -enum StatusEnum { - // Note that the location is shifted 9 when it's connected via USB - // Byte location | bit location - Plugged = (38 << 8) | 0x02, - Unplugged = (38 << 8) | 0x03, - - Charging = (39 << 8) | 0xEE, - NotCharging = (39 << 8) | 0xF1, - Shutdown = (39 << 8) | 0x01, - Dying = (39 << 8) | 0x02, - Low = (39 << 8) | 0x03, - High = (39 << 8) | 0x04, - Full = (39 << 8) | 0x05, - - MoveCharging = (21 << 8) | 0xEE, - MoveNotCharging = (21 << 8) | 0xF1, - MoveShutdown = (21 << 8) | 0x01, - MoveDying = (21 << 8) | 0x02, - MoveLow = (21 << 8) | 0x03, - MoveHigh = (21 << 8) | 0x04, - MoveFull = (21 << 8) | 0x05, - - CableRumble = (40 << 8) | 0x10, // Operating by USB and rumble is turned on - Cable = (40 << 8) | 0x12, // Operating by USB and rumble is turned off - BluetoothRumble = (40 << 8) | 0x14, // Operating by Bluetooth and rumble is turned on - Bluetooth = (40 << 8) | 0x16, // Operating by Bluetooth and rumble is turned off -}; - -#endif -- cgit v1.2.3