Remove core library and build files

1 files changed, 0 insertions, 47 deletions

diff --git a/protocol/usb_hid/README b/protocol/usb_hid/README
deleted file mode 100644
index 0d2efc2aa2..0000000000
--- a/protocol/usb_hid/README
+++ /dev/null
@@ -1,47 +0,0 @@
-USB HID protocol
-================
-Host side of USB HID keyboard protocol implementation.
-Only standard HID Boot mode is supported at this time. This means most of normal keyboards are supported while proprietary >6KRO and NKRO is not.
-
-Third party Libraries
----------------------
-USB_Host_Shield_2.0
-    Circuits@Home repository is git-submoduled. Do git submodule init & update to get the content.
-    https://github.com/felis/USB_Host_Shield_2.0
-
-arduino-1.0.1
-    Arduino files copied from:
-    https://github.com/arduino/Arduino/hardware/arduino/{cores,variants}
-
-
-Test build
-----------
-In test directory;
-    $ make
-    $ DEV=/dev/ttyACM0 make program
-
-You can see HID keyboard reports on debug output.
-
-
-Restriction and Bug
--------------------
-Not supported/confirmed yet.
-    Hub, suspend, keyboard LED
-
-Switching power on VBUS:
-    To power reset device.
-    http://www.circuitsathome.com/camera-control/simulating-cable-disconnect-on-usb-host-shield-2-0
-    This is needed for a device which are not initilized with 'USB Bus Reset'(long SE0)
-
-Can't bus-reset a keyboard which already attached on bus properly.
-    Slow start up of Leonardo's bootloader causes this?
-    Need to unplug/plug a keyboard after firmware starts up.
-    MAX3421E doesn't work SAMPLEBUS well to know whether device connected or not.
-
-Keyboard with other endpoints than boot keyboard may go wrong.
-    On my keyboard with mouse key the converter locks up when using mouse key function.
-
-Can't compile on Windows filesystem.
-    On Linux no problem.
-    Windows doesn't know difference between common/print.h and arduino/Print.h.
-    Change file name common/print.h to console.h ?