From 6746e37088ce8ba03529c1226bd216705edb2b1f Mon Sep 17 00:00:00 2001 From: tmk Date: Fri, 10 Apr 2015 01:25:48 +0900 Subject: Remove core library and build files --- protocol/usb_hid/README | 47 ----------------------------------------------- 1 file changed, 47 deletions(-) delete mode 100644 protocol/usb_hid/README (limited to 'protocol/usb_hid/README') diff --git a/protocol/usb_hid/README b/protocol/usb_hid/README deleted file mode 100644 index 0d2efc2aa2..0000000000 --- a/protocol/usb_hid/README +++ /dev/null @@ -1,47 +0,0 @@ -USB HID protocol -================ -Host side of USB HID keyboard protocol implementation. -Only standard HID Boot mode is supported at this time. This means most of normal keyboards are supported while proprietary >6KRO and NKRO is not. - -Third party Libraries ---------------------- -USB_Host_Shield_2.0 - Circuits@Home repository is git-submoduled. Do git submodule init & update to get the content. - https://github.com/felis/USB_Host_Shield_2.0 - -arduino-1.0.1 - Arduino files copied from: - https://github.com/arduino/Arduino/hardware/arduino/{cores,variants} - - -Test build ----------- -In test directory; - $ make - $ DEV=/dev/ttyACM0 make program - -You can see HID keyboard reports on debug output. - - -Restriction and Bug -------------------- -Not supported/confirmed yet. - Hub, suspend, keyboard LED - -Switching power on VBUS: - To power reset device. - http://www.circuitsathome.com/camera-control/simulating-cable-disconnect-on-usb-host-shield-2-0 - This is needed for a device which are not initilized with 'USB Bus Reset'(long SE0) - -Can't bus-reset a keyboard which already attached on bus properly. - Slow start up of Leonardo's bootloader causes this? - Need to unplug/plug a keyboard after firmware starts up. - MAX3421E doesn't work SAMPLEBUS well to know whether device connected or not. - -Keyboard with other endpoints than boot keyboard may go wrong. - On my keyboard with mouse key the converter locks up when using mouse key function. - -Can't compile on Windows filesystem. - On Linux no problem. - Windows doesn't know difference between common/print.h and arduino/Print.h. - Change file name common/print.h to console.h ? -- cgit v1.2.3