diff options
author | Joel Challis <git@zvecr.com> | 2024-02-19 09:48:06 +0000 |
---|---|---|
committer | GitHub <noreply@github.com> | 2024-02-19 09:48:06 +0000 |
commit | e26e12402b7a5a619a95999f5c8a2a73defcd9b3 (patch) | |
tree | 22b25da1370626c7f1cb31ff6c6683115b2ba968 /keyboards/wilba_tech/zeal60/keymaps/tusing | |
parent | db1df185c9f779bc36f85786f87135e03cfafd29 (diff) |
Manual user keymap removal (#23104)
Diffstat (limited to 'keyboards/wilba_tech/zeal60/keymaps/tusing')
4 files changed, 0 insertions, 178 deletions
diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md b/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md deleted file mode 100644 index 1fbd745742..0000000000 --- a/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md +++ /dev/null @@ -1,79 +0,0 @@ -# RGB Underglow Strip on the Zeal60: A Guide - -<img src="https://i.imgur.com/UuUdOCb.jpg" width="800"> - -## Requirements - -- WS2812B RGB strip, preferably 60 LEDs/meter -- Wire, solder -- Tape, hot glue, or some sort of adhesive - -## A. Connecting the strip -You might find the [**full PCB image**](https://cdn.shopify.com/s/files/1/0490/7329/files/zeal60jumpers.png) helpful. Ignore the red boxes! - -1. Connect V+ to the receiving end of the thermistor labeled F1; connect GND to the board's GND pin. (*Avoid connecting +V to the board's +5V pin* - you will likely overload the thermistor, and you will limit your maximum brightness.) - - <img src="https://i.imgur.com/jd7qivh.png" width="300"> - -2. Connect DI to PB0. - - <img src="https://i.imgur.com/BiMyMLv.jpg" width="300"> - -3. Should look something like this when finished: - - <img src="https://i.imgur.com/ngxYMuA.jpg" width="600"> - -*Optional:* To allow considerably more light to escape, consider angling the strip outwards by using some sort of fulcrum under the strip. (I used a thick wire.) - -## B. Enabling the strip -1. If it is not present already, add the following to your ***keymap's*** ```Makefile```: - - ```Makefile - RGBLIGHT_ENABLE = yes - AUDIO_ENABLE = no #Underglow animations cannot be used with audio. - ``` -2. If it is not present already, add the following to your *keymap's* ```config.h```, and edit the values as necessary: - - ```c - // Set up RGB underglow. - #define WS2812_DI_PIN B0 // The pin your RGB strip is wired to - #define RGBLED_NUM 35 // Number of LEDs - #define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue - #define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat - #define RGBLIGHT_VAL_STEP 10 // How much each press of rgb_val changes val - ``` -3. If they are not present already, add the following keycodes to your keymap to control the RGB strip: ```RGB_TOG``` (on/off), ```RGB_MOD``` (step through modes), ```RGB_HUI```, ```RGB_HUD```, ```RGB_SAI```, ```RGB_SAD```, ```RGB_VAI```, ```RGB_VAD``` (HSV increase/decrease). Add these to your keymap. - -## C. Dealing with current limits -USB 2.0 ports on laptops provide up to 500mA max, but USB 3.0 ports can provide up to 900mA; USB 3.1 up to 1.5A; and powered USB hubs even more. We can run our keyboard at a higher brightness if we draw more power. **The Zeal60 uses 500mA at max brightness.** This means that **you have about 400mA remaining for the strip to use on a USB 3.0 port**; 1000mA free on a USB 3.1 port, so on and so forth. - -***Warning:*** **This means you will need to turn *off* your RGB strip before connecting to a USB 2.0 port**, as USB 2.0 cannot sustain the current necessary! - -1. If not present already, add the following to your keymap's ```config.h```. Change the numbers based on your needs. The ones below are safe underestimates. - - ```c - // Enable current limiting for RGB underglow. - #define RGBSTRIP_CURRENT_LIMIT 400 // Strip current limit in mA. (USB amperage - 500mA for keyboard) - #define RGBSTRIP_MAX_CURRENT_PER_LIGHT 50 // mA per light when at max brightness. - ``` - *Example:* I use a USB port capable of providing 1800 mA. The keyboard uses 500mA, so my personal value (in the `tusing` keymap) for `RGBSTRIP_CURRENT_LIMIT` is 1300. The particular WS2812B RGB strip I have uses a maximum of 60 mA per LED, so that is my personal value for `RGBSTRIP_MAX_CURRENT_PER_LIGHT`. -2. Toggle on the LED strip (```RGB_TOG```) and step through animations (```RGB_MOD```) to test it out! - -## D. Sources and resources -### A. Connecting the strip. -* [In-depth description of connecting an RGB strip to the GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4d5or2/my_first_custom_build_satan_gh60_rbg_underglow_in/d1nz3o7/) -* [32U4 Pinout](https://40.media.tumblr.com/93b6bbd4113418c2b45459bb177e67c5/tumblr_mi49a20QMB1s5t695o1_1280.png) -* [Redditor describes connecting RGB strips on his Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4hbjw4/finally_finished_my_satan_gh60_also_granite_o/d2qn8zx/?context=3) -* [Another Redditor on RGB with the Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4ewzdx/gh60_satan_with_the_rgb_mod/d251uu6/ ) - -### B. Enabling the strip. -* [QMK Wiki portion on underglow](https://github.com/jackhumbert/qmk_firmware/wiki#rgb-under-glow-mod) -* [Planck ```Makefile```, ```config.h```, and ```keymap.c``` config example](https://github.com/jackhumbert/qmk_firmware/tree/master/keyboards/planck/keymaps/yang) -* [Video demonstrating keycode functions and RGB modes on a KC60](https://www.youtube.com/watch?v=VKrpPAHlisY) - -### C. Dealing with current limits. -* [Discussion of cutting jumpers and adding resistors to lower current from Zeal60](https://www.reddit.com/r/MechanicalKeyboards/comments/5hou92/photos_zeal60_lets_just_say_santa_came_early_this/db23qid/) -* [A selection of 900mA-1.5A current hold fuses - look for an SMD 0805-sized fuse.](https://goo.gl/748avG) -* [Video detailing technique to solder 0805 resistors](https://www.youtube.com/watch?v=PU7wLcuqc-I&t=123s&list=FLheMlKEVQ5cmVXazUt6HrxQ&index=2) -* [QMK feature request to implement max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/issues/954) -* [Commit enabling max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/commit/83e613ad239459582ae28f78b6c81535b9b138d7) diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h b/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h deleted file mode 100644 index e797f81941..0000000000 --- a/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h +++ /dev/null @@ -1,45 +0,0 @@ -#pragma once - -/* Enable/disable LEDs based on layout. */ -#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE -#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0 - -#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT -#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 - -#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT -#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0 - -#undef RGB_BACKLIGHT_USE_7U_SPACEBAR -#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0 - -#undef RGB_BACKLIGHT_USE_ISO_ENTER -#define RGB_BACKLIGHT_USE_ISO_ENTER 0 - -#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS -#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0 - -// Set up RGB underglow. -#define WS2812_DI_PIN B0 // The pin your RGB strip is wired to -#define RGBLIGHT_EFFECT_BREATHING -#define RGBLIGHT_EFFECT_RAINBOW_MOOD -#define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define RGBLIGHT_EFFECT_SNAKE -#define RGBLIGHT_EFFECT_KNIGHT -#define RGBLIGHT_EFFECT_CHRISTMAS -#define RGBLIGHT_EFFECT_STATIC_GRADIENT -#define RGBLIGHT_EFFECT_RGB_TEST -#define RGBLIGHT_EFFECT_ALTERNATING -#define RGBLIGHT_EFFECT_TWINKLE -#define RGBLED_NUM 35 // Number of LEDs -#define RGBLIGHT_HUE_STEP 5 // How much each press of rgb_hue changes hue -#define RGBLIGHT_SAT_STEP 10 // How much each press of rgb_sat changes sat -#define RGBLIGHT_VAL_STEP 10 // How much each press of rgb_val changes val - -// Enable current limiting for RGB underglow. -#define RGBSTRIP_CURRENT_LIMIT 1300 // Strip current limit in mA. (USB amperage - 500mA for keyboard) -#define RGBSTRIP_MAX_CURRENT_PER_LIGHT 40 // mA per light when at max brightness. - -// Scale brightnes according to BRIGHTNESS_CORRECTION_TABLE in quantum/rgblight.c. -// This allows to mitigate uneven brightness from LED underglow strips. -// #define LED_BRIGHTNESS_CORRECTION diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/keymap.c b/keyboards/wilba_tech/zeal60/keymaps/tusing/keymap.c deleted file mode 100644 index 21cb2cd73f..0000000000 --- a/keyboards/wilba_tech/zeal60/keymaps/tusing/keymap.c +++ /dev/null @@ -1,48 +0,0 @@ -// Default layout for Zeal60 -#include QMK_KEYBOARD_H - -// For readability. -#define _x_ KC_NO -#define AUD_PRV LCTL(KC_MPRV) // Previous music track -#define AUD_PLY LCTL(KC_MPLY) // Pause music -#define AUD_NXT LCTL(KC_MNXT) // Next music track - -// Zeal60-specific keys: -// EF_INC, EF_DEC, // next/previous backlight effect -// H1_INC, H1_DEC, // Color 1 hue increase/decrease -// S1_INC, S1_DEC, // Color 1 saturation increase/decrease -// H2_INC, H2_DEC, // Color 2 hue increase/decrease -// S2_INC, S2_DEC, // Color 2 saturation increase/decrease -// BR_INC, BR_DEC, // backlight brightness increase/decrease - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -// Default layer: Pressing caps-lock momentarily switches to Layer 1. -// This is the default layer. Pressing an empty keycode on another layer will take you here. - [0] = { - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC}, - {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS}, - {MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, _x_ }, - {KC_LSFT, _x_ , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, _x_ }, - {KC_LCTL, KC_LGUI, KC_LALT, _x_ , _x_ , _x_ , _x_ , KC_SPC, _x_ , _x_ , KC_LEFT, KC_UP, KC_DOWN, KC_RGHT} - }, - -// Layer 1: Pressing enter switches to layer 2, where backlight controls live. -// This is a momentary layer: once you let go of caps, you'll be back in layer 1. - [1] = { - {KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL }, - {_______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUS, KC_INS, KC_DEL, _______}, - {_______, AUD_PRV, AUD_PLY, AUD_NXT, _______, _______, _______, _______, _______, _______, _______, _______, TO(2) , _x_ }, - {KC_CAPS, _x_ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _x_ }, - {KC_RCTL, KC_RGUI, KC_RALT, _x_ , _x_ , _x_ , _x_ , _______, _x_ , _x_ , KC_HOME, KC_PGUP, KC_PGDN, KC_END} - }, - -// Layer 2: Zeal60 and backlight configuration. (Get here quickly by pressing Caps+Enter from Layer 1.) -// This is a persistent layer. Get back to the default layer by pressing enter. - [2] = { - {QK_BOOT, EF_DEC, EF_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, _______, _______, _______, _______, _______, _______, _______}, - {_______, H1_DEC, H1_INC, S1_DEC, S1_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, H2_DEC, H2_INC, S2_DEC, S2_INC, _______, _______, _______, _______, _______, _______, _______, TO(0) , _x_ }, - {RGB_MOD, _x_ , RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _x_ }, - {RGB_TOG, RGB_VAD, RGB_VAI, _x_ , _x_ , _x_ , _x_ , _______, _x_ , _x_ , _______, _______, _______, _______} - } -}; diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/rules.mk b/keyboards/wilba_tech/zeal60/keymaps/tusing/rules.mk deleted file mode 100644 index 762905da03..0000000000 --- a/keyboards/wilba_tech/zeal60/keymaps/tusing/rules.mk +++ /dev/null @@ -1,6 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -RGBLIGHT_ENABLE = yes -AUDIO_ENABLE = no # Underglow cannot be used with audio. |