diff options
| author | Sam Hudson <samsamm777@users.noreply.github.com> | 2021-02-05 11:31:15 +0000 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2021-02-05 03:31:15 -0800 |
| commit | 18babeae49dc933f7a07e123241ae2a78a75f168 (patch) | |
| tree | 733e4f51eb0b6e45abfe3346c007ca8a07ef1cb8 /keyboards/shk9/readme.md | |
| parent | 59bf018e9fb50f20400d012f09558ad4ffe6d4a4 (diff) | |
[Keyboard] add shk9 macropad (#11505)
* added shk9 macropad
* updated readme
* removed json file
* updated config
* removed commented config
* fixed website address
* added bootloader mode info to readme
* remove midi enable rule
* fixed comment
* fixed default keymap
* changed layout to ortho
* fixed typo
* fixed broken layout
* pr changes
* added keymap spacing
Diffstat (limited to 'keyboards/shk9/readme.md')
| -rw-r--r-- | keyboards/shk9/readme.md | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/keyboards/shk9/readme.md b/keyboards/shk9/readme.md new file mode 100644 index 0000000000..1fab42a1ac --- /dev/null +++ b/keyboards/shk9/readme.md @@ -0,0 +1,23 @@ +# shk9 + + + +The SHK9 is a tiny 3x3 macropad! Fully configurable with via. + +* Keyboard Maintainer: [Sam Hudson](https://github.com/samsamm777) +* Hardware Supported: SHK9 PCB (ATmega32u4) +* Hardware Availability: http://superhuman.website + +Make example for this keyboard (after setting up your build environment): + + make shk9:default + +Flashing example for this keyboard: + + make shk9:default:flash + +## Bootloader Mode + +To reset the board into bootloader mode, remove the pcb from the case buy removing keycaps, and unscrewing the 3 screws. Then (while plugged in) press the switch on the underside of the PCB for a few seconds. The board is now in bootloader mode. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file |