From 18babeae49dc933f7a07e123241ae2a78a75f168 Mon Sep 17 00:00:00 2001 From: Sam Hudson Date: Fri, 5 Feb 2021 11:31:15 +0000 Subject: [Keyboard] add shk9 macropad (#11505) * added shk9 macropad * updated readme * removed json file * updated config * removed commented config * fixed website address * added bootloader mode info to readme * remove midi enable rule * fixed comment * fixed default keymap * changed layout to ortho * fixed typo * fixed broken layout * pr changes * added keymap spacing --- keyboards/shk9/readme.md | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 keyboards/shk9/readme.md (limited to 'keyboards/shk9/readme.md') diff --git a/keyboards/shk9/readme.md b/keyboards/shk9/readme.md new file mode 100644 index 0000000000..1fab42a1ac --- /dev/null +++ b/keyboards/shk9/readme.md @@ -0,0 +1,23 @@ +# shk9 + +![shk9](https://i.imgur.com/FluRgiHl.jpg) + +The SHK9 is a tiny 3x3 macropad! Fully configurable with via. + +* Keyboard Maintainer: [Sam Hudson](https://github.com/samsamm777) +* Hardware Supported: SHK9 PCB (ATmega32u4) +* Hardware Availability: http://superhuman.website + +Make example for this keyboard (after setting up your build environment): + + make shk9:default + +Flashing example for this keyboard: + + make shk9:default:flash + +## Bootloader Mode + +To reset the board into bootloader mode, remove the pcb from the case buy removing keycaps, and unscrewing the 3 screws. Then (while plugged in) press the switch on the underside of the PCB for a few seconds. The board is now in bootloader mode. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file -- cgit v1.2.3