2020 November 28 Breaking Changes Update (#11053)

* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
author: James Young <18669334+noroadsleft@users.noreply.github.com> 2020-11-28 12:02:18 -0800
committer: GitHub <noreply@github.com> 2020-11-28 12:02:18 -0800
commit: c66df1664497546f32662409778731143e45a552 (patch)
tree: da73a2d532a27685a31d932b3a44a707d4a3af81 /keyboards/maartenwut/atom47
parent: 15385d4113414d42bd062c60c9de5df797d3157f (diff)
21 files changed, 0 insertions, 713 deletions
diff --git a/keyboards/maartenwut/atom47/keymaps/LEdiodes/keymap.c b/keyboards/maartenwut/atom47/keymaps/LEdiodes/keymap.c
deleted file mode 100644
index 87e1244214..0000000000
--- a/keyboards/maartenwut/atom47/keymaps/LEdiodes/keymap.c
+++ /dev/null
@@ -1,33 +0,0 @@
-#include QMK_KEYBOARD_H
-
-// These are all aliases for the  function layers.
-#define _L0 0
-#define _L1 1
-#define _L2 2
-#define _L3 3
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_L0] = LAYOUT(
-  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
-  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
-  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_L1),	\
-  KC_LCTL,		KC_LGUI,	KC_LALT,	TG(_L3),	KC_SPC, 				KC_SPC,					MO(_L2),	KC_RALT,	KC_APP,					KC_RCTRL),	\
- 
-[_L2] = LAYOUT(
-  _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
-  KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
-  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
- 
-[_L1] = LAYOUT(
-  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
-  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
-  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
-  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
- 
-[_L3] = LAYOUT(
-  _______,		_______,	_______,	   KC_7,	   KC_8,	   KC_9,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
-  _______,		_______,	_______,	   KC_4,	   KC_5,	   KC_6,	_______,	_______,	_______,	_______,	_______,				_______,	\
-  _______,		_______,	_______,	   KC_1,	   KC_2,	   KC_3,	_______,	_______,	_______,	_______,	_______,				_______,	\
-  _______,		_______,	_______,	   _______,    KC_0,	  KC_DOT, 	        	            _______,	_______,	_______,				RESET),     \
-};
diff --git a/keyboards/maartenwut/atom47/keymaps/LEdiodes/rules.mk b/keyboards/maartenwut/atom47/keymaps/LEdiodes/rules.mk
deleted file mode 100644
index 9334aaf28f..0000000000
--- a/keyboards/maartenwut/atom47/keymaps/LEdiodes/rules.mk
+++ /dev/null
@@ -1,64 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE = no 		# MIDI controls
-AUDIO_ENABLE = no
-UNICODE_ENABLE = no 		# Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/maartenwut/atom47/keymaps/default/keymap.c b/keyboards/maartenwut/atom47/keymaps/default/keymap.c
deleted file mode 100644
index dc87b5a52b..0000000000
--- a/keyboards/maartenwut/atom47/keymaps/default/keymap.c
+++ /dev/null
@@ -1,50 +0,0 @@
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-#define _MA 0 //Main layer
-#define _FN 1 //Fn
-#define _FN1 2 //Fn1
-#define _PN 3 //Pn
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_MA] = LAYOUT(
-  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
-  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
-  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,	MO(_FN1),	\
-  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),				KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,		KC_RCTRL),	\
- 
-[_FN] = LAYOUT(
-  _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
-  KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
-  _______,					_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,	_______,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
- 
-[_FN1] = LAYOUT(
-  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
-  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
-  _______,					_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,	_______,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
- 
-[_PN] = LAYOUT(
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
-  RGB_TOG,		RGB_HUI,	RGB_SAI,	RGB_VAI,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
-  RGB_MOD,					RGB_HUD,	RGB_SAD,	RGB_VAD,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),
-};
-
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
- 	   	PORTE &= ~(1 << 6);
-
-
-    } else {
-        // Turn capslock off
-    	PORTE |= (1 << 6);
-    }
-}
-
diff --git a/keyboards/maartenwut/atom47/keymaps/default/readme.md b/keyboards/maartenwut/atom47/keymaps/default/readme.md
deleted file mode 100644
index 6795953857..0000000000
--- a/keyboards/maartenwut/atom47/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
diff --git a/keyboards/maartenwut/atom47/keymaps/junonum_a47/keymap.c b/keyboards/maartenwut/atom47/keymaps/junonum_a47/keymap.c
deleted file mode 100644
index ebd52ffd03..0000000000
--- a/keyboards/maartenwut/atom47/keymaps/junonum_a47/keymap.c
+++ /dev/null
@@ -1,150 +0,0 @@
-#include QMK_KEYBOARD_H
-
-/* enum custom_keycodes {
-  SHIFTEN = SAFE_RANGE,
-  LOWER,
-  RAISE,
-  SPACFNL,
-  SPACFNR,
-  MAIN,
-  ADJUST
-}; */
-
-#define _MAIN 0
-#define _SPLEFT 1
-#define _SPRIGHT 2
-#define _LOWER 3
-#define _RAISE 4
-#define _ADJUST 5
-
-#define _DPAD 6
-#define _DPADNUM 7
-
-
-#define SHIFTEN RSFT_T(KC_ENT)
-#define LOWER MO(_LOWER)
-#define RAISE MO(_RAISE)
-#define SPACFNL LT(_SPLEFT, KC_SPC)
-#define SPACFNR LT(_SPRIGHT, KC_SPC)
-
-#define DP_ON TO(_DPAD)
-#define DP_OFF TO(_MAIN)
-#define DPADNUM MO(_DPADNUM)
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	
-	// Primary layer	
-	[_MAIN] = LAYOUT(
-	  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,
-	  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_QUOT,
-	  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	SHIFTEN,
-	  KC_LCTL,		KC_LGUI,	KC_LALT,	LOWER,					SPACFNL, 				SPACFNR,				RAISE,		KC_RALT,	KC_APP,		KC_RCTRL
-	),
-
-	// Main Fn navigation layer
-	[_SPLEFT] = LAYOUT(
-	  _______,		KC_VOLU, 	KC_PGUP, 	KC_UP,   	KC_PGDN, 	KC_INS,  	_______, 	_______, 	KC_UP,   	_______, 	KC_PSCR,	_______,	_______,	
-	  _______,		KC_VOLD, 	KC_LEFT, 	KC_DOWN, 	KC_RGHT, 	KC_HOME, 	_______, 	KC_LEFT, 	KC_DOWN, 	KC_RGHT, 	_______, 				KC_DEL , 	
-	  _______,					_______,    KC_MPRV, 	KC_MPLY, 	KC_MNXT, 	KC_END,  	_______, 	_______, 	KC_VOLD, 	KC_VOLU, 	KC_MUTE,	_______,	
-	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
-	),	
-
-	// Primary numeric layer using right Spacebar
-	[_SPRIGHT] = LAYOUT(
-	  KC_GRV,		_______,	_______,	KC_LBRC, 	KC_RBRC,	_______,	_______,	KC_7,		KC_8,		KC_9,		KC_0,		_______,	_______,	
-	  _______,		_______,	_______,	KC_LCBR, 	KC_RCBR,	_______,	_______,	KC_4,		KC_5,		KC_6,	 	KC_MINUS, 				KC_BSLS, 	
-	  _______,					_______,	_______,	_______,	_______,	_______,	_______,	KC_1,		KC_2,		KC_3,		KC_EQUAL,	_______,	
-	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
-	),	
-
-	// Secondary symbol layer, also Lower
-	[_LOWER] = LAYOUT(
-	  KC_TILD, 		_______,	_______,	_______,	_______,	_______,	_______, 	KC_AMPR, 	KC_ASTR, 	KC_LPRN, 	KC_RPRN,	KC_SLCK,	KC_PAUS,	
-	  KC_CAPS,		KC_F1,   	KC_F2,   	KC_F3,   	KC_F4,   	KC_F5,   	KC_F6,		KC_DLR,  	KC_PERC, 	KC_CIRC, 	KC_UNDS, 				KC_PIPE,	
-	  _______,					KC_F7,   	KC_F8,   	KC_F9,   	KC_F10,  	KC_F11,  	KC_F12,		KC_EXLM, 	KC_AT,   	KC_HASH, 	KC_PLUS,	_______,	
-	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	KC_VOLD, 	KC_VOLU, 	KC_MPLY
-	),	
-	  
-	// Numpad layer // Also a homage to Planck with the media player/pause button
-	[_RAISE] = LAYOUT(
-	  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	
-	  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,
-	  _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	
-	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	KC_VOLD, 	KC_VOLU, 	KC_MPLY
-	),	
-
-	// Safety layer for special functions
-	[_ADJUST] = LAYOUT(
-	  _______,		RESET,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,
-	  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,
-	  _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	DP_ON,
-	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
-	),
-	
-	[_DPAD] = LAYOUT(
-	  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,
-	  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_QUOT,
-	  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_UP,		KC_ENT,
-	  KC_LCTL,		KC_LGUI,	KC_LALT,	XXXXXXX,				DPADNUM, 				KC_SPC,					DP_OFF,		KC_LEFT,	KC_DOWN,	KC_RGHT
-	),
-	
-	[_DPADNUM] = LAYOUT(
-	  _______,		KC_1,		KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		_______,	_______,
-	  _______,		_______,	_______,	_______,	_______,	KC_F1,   	KC_F2,   	KC_F3,   	KC_F4,   	KC_F5,   	KC_F6,					_______,
-	  _______,					_______,	_______,	_______,	_______,	KC_F7,   	KC_F8,   	KC_F9,   	KC_F10,  	KC_F11,  	KC_F12,		_______,
-	  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______
-	),
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-/*     case MAIN:
-      if (record->event.pressed) {
-        persistant_default_layer_set(1UL<<_MAIN);
-      }
-      return false;
-      break; */
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-/*     case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break; */
-  }
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
- 	   	writePinLow(E6);
-
-
-    } else {
-        // Turn capslock off
-    	writePinHigh(E6);
-    }
-}
diff --git a/keyboards/maartenwut/atom47/keymaps/junonum_a47/readme.md b/keyboards/maartenwut/atom47/keymaps/junonum_a47/readme.md
deleted file mode 100644
index 42d8370231..0000000000
--- a/keyboards/maartenwut/atom47/keymaps/junonum_a47/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-Juno's junonum keymap adapted for Atom47.
-\ No newline at end of file
diff --git a/keyboards/maartenwut/atom47/keymaps/maartenwut/keymap.c b/keyboards/maartenwut/atom47/keymaps/maartenwut/keymap.c
deleted file mode 100644
index c01ace92a9..0000000000
--- a/keyboards/maartenwut/atom47/keymaps/maartenwut/keymap.c
+++ /dev/null
@@ -1,68 +0,0 @@
-#include QMK_KEYBOARD_H
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-#define _MA 0 //Main layer
-#define _LO 1 //FN1
-#define _RA 2 //FN
-
-enum custom_keycodes {
-    CTRLZ = SAFE_RANGE,
-    CTRLX,
-    CTRLC,
-    CTRLV
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_MA] = LAYOUT(
-  KC_GESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
-  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
-  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_RSFT,	\
-  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_LO),				KC_SPC, 				KC_SPC,					MO(_RA),	KC_RALT,	KC_APP,		KC_RCTRL),	\
-
-[_LO] = LAYOUT(
-  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
-  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
-  _______,					CTRLZ,		CTRLX,		CTRLC,		CTRLV,		_______,	_______,	KC_QUOT,	KC_LBRC,	KC_RBRC,	KC_BSLS,	_______,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),	\
-
-[_RA] = LAYOUT(
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	KC_PGUP,	KC_UP,		KC_PGDN,	_______,	_______,	_______,	\
-  KC_CAPS,		_______,	_______,	_______,	_______,	_______,	_______,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	_______,				_______,	\
-  _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	KC_VOLD,	KC_VOLU,	KC_MPLY,	KC_PSCR,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
-
-};
-
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-		PORTE &= ~(1 << 6);
-    } else {
-        // Turn capslock off
-    	PORTE |= (1 << 6);
-    }
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-    if (record->event.pressed) {
-        switch(keycode) {
-            case CTRLZ:
-                SEND_STRING(SS_LCTRL("z"));
-                return false;
-            case CTRLX:
-                SEND_STRING(SS_LCTRL("x"));
-                return false;
-            case CTRLC:
-                SEND_STRING(SS_LCTRL("c"));
-                return false;
-            case CTRLV:
-                SEND_STRING(SS_LCTRL("v"));
-                return false;
-        }
-    }
-    return true;
-};
diff --git a/keyboards/maartenwut/atom47/keymaps/maartenwut/readme.md b/keyboards/maartenwut/atom47/keymaps/maartenwut/readme.md
deleted file mode 100644
index 6795953857..0000000000
--- a/keyboards/maartenwut/atom47/keymaps/maartenwut/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
diff --git a/keyboards/maartenwut/atom47/readme.md b/keyboards/maartenwut/atom47/readme.md
deleted file mode 100644
index c3cffcea74..0000000000
--- a/keyboards/maartenwut/atom47/readme.md
+++ /dev/null
@@ -1,26 +0,0 @@
-# Atom47
-
-![Atom47](https://i.imgur.com/Wwflqvt.png)
-
-## Support
-Keyboard Maintainer: [Maarten Dekkers](https://github.com/maartenwut)  
-Hardware Supported: Atom47 rev2/rev3
-Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)  
-
-
-## Features (rev3 and up)
-- QMK Firmware  
-- 6 Underglow RGB leds  
-- In-switch leds  
-- Through-hole micro usb connector (less likely to break off!)  
-- South facing leds for the QMX/Zealencio users  
-- Multiple layouts  
-- Easily reachable reset button under the spacebar  
-- CapsLock indicator  
-
-## Build
-To build the default keymap for the latest revision, simply run `make atom47:default`. Specifiy the revision like so: `make atom47/rev3:default`.
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
-
-![Atom47](https://i.imgur.com/JfYnOba.jpg)
diff --git a/keyboards/maartenwut/atom47/rev2/config.h b/keyboards/maartenwut/atom47/rev2/config.h
deleted file mode 100644
index c38cd450ed..0000000000
--- a/keyboards/maartenwut/atom47/rev2/config.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
-Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef REV2_CONFIG_H
-#define REV2_CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0003
-#define MANUFACTURER    Vortex
-#define PRODUCT         Core
-#define DESCRIPTION     Atom47 PCB for the Vortex Core Rev.2
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 13
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {B1,B2,B3,B7}
-#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
-#define UNUSED_PINS
-
-#define BACKLIGHT_PIN B6
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* Backlight configuration
- */
-#define BACKLIGHT_LEVELS 4
-
-#define RGB_DI_PIN D0    // The pin the LED strip is connected to
-#define RGBLED_NUM 1     // Number of LEDs in your strip
-
-#define QMK_ESC_OUTPUT D7 // usually COL
-#define QMK_ESC_INPUT B1 // usually ROW
-#define QMK_LED B6
-
-#endif
diff --git a/keyboards/maartenwut/atom47/rev2/info.json b/keyboards/maartenwut/atom47/rev2/info.json
deleted file mode 100644
index 3c45ca8d45..0000000000
--- a/keyboards/maartenwut/atom47/rev2/info.json
+++ /dev/null
@@ -1,12 +0,0 @@
-{
-  "keyboard_name": "Atom47", 
-  "url": "https://atomkb.eu/atom47", 
-  "maintainer": "Maarten Dekkers", 
-  "width": 13, 
-  "height": 4, 
-  "layouts": {
-    "LAYOUT": {
-      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}]
-    }
-  }
-}
diff --git a/keyboards/maartenwut/atom47/rev2/readme.md b/keyboards/maartenwut/atom47/rev2/readme.md
deleted file mode 100644
index b63e1bb44c..0000000000
--- a/keyboards/maartenwut/atom47/rev2/readme.md
+++ /dev/null
@@ -1,23 +0,0 @@
-# Atom47 rev2
-
-This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.
-
-## Support
-Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot)  
-Hardware Supported: Atom47 rev2  
-Hardware Availability: None  
-
-
-## Features
-- QMK Firmware  
-- In-switch leds  
-- Through-hole micro usb connector (less likely to break off!)  
-- Easily reachable reset button under the spacebar  
-- In-switch CapsLock indicator  
-
-## Build
-To build the default keymap, simply run `make atom47/rev2:default`.
-
-For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
diff --git a/keyboards/maartenwut/atom47/rev2/rev2.c b/keyboards/maartenwut/atom47/rev2/rev2.c
deleted file mode 100644
index 06fce06dad..0000000000
--- a/keyboards/maartenwut/atom47/rev2/rev2.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include "rev2.h"
-#include "led.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-};
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    DDRB &= ~(1<<5);
-
-	//Set output high, so the capslock led is off
-	PORTB |= (1 << 5);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTF |= (1<<5);
-    } else {
-        // Turn capslock off
-        PORTF &= ~(1<<5);
-    }
-	led_set_user(usb_led);
-}
diff --git a/keyboards/maartenwut/atom47/rev2/rev2.h b/keyboards/maartenwut/atom47/rev2/rev2.h
deleted file mode 100644
index bfea34e062..0000000000
--- a/keyboards/maartenwut/atom47/rev2/rev2.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef ATOM47_H
-#define ATOM47_H
-
-#include "quantum.h"
-
-// readability
-#define XXX KC_NO
-
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
-	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
-) \
-{ \
-    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
-	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
-	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
-	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
-}
-
-void matrix_init_user(void);
-void matrix_scan_user(void);
-
-#endif
diff --git a/keyboards/maartenwut/atom47/rev2/rules.mk b/keyboards/maartenwut/atom47/rev2/rules.mk
deleted file mode 100644
index 0b6b879986..0000000000
--- a/keyboards/maartenwut/atom47/rev2/rules.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality
diff --git a/keyboards/maartenwut/atom47/rev3/config.h b/keyboards/maartenwut/atom47/rev3/config.h
deleted file mode 100644
index 5a302abff4..0000000000
--- a/keyboards/maartenwut/atom47/rev3/config.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
-Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef REV3_CONFIG_H
-#define REV3_CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0003
-#define MANUFACTURER    Vortex
-#define PRODUCT         Core
-#define DESCRIPTION     Atom47 PCB for the Vortex Core Rev.3
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 13
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {B3,B2,B1,B0}
-#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7}
-#define UNUSED_PINS
-
-#define BACKLIGHT_PIN B6
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Backlight configuration
- */
-#define BACKLIGHT_LEVELS 4
-
-#define RGB_DI_PIN F5    // The pin the LED strip is connected to
-#define RGBLED_NUM 6     // Number of LEDs in your strip
-#define RGBLIGHT_ANIMATIONS
-#define QMK_ESC_OUTPUT B7 // usually COL
-#define QMK_ESC_INPUT B3 // usually ROW
-#define QMK_LED E6
-
-#endif
diff --git a/keyboards/maartenwut/atom47/rev3/info.json b/keyboards/maartenwut/atom47/rev3/info.json
deleted file mode 100644
index 3c45ca8d45..0000000000
--- a/keyboards/maartenwut/atom47/rev3/info.json
+++ /dev/null
@@ -1,12 +0,0 @@
-{
-  "keyboard_name": "Atom47", 
-  "url": "https://atomkb.eu/atom47", 
-  "maintainer": "Maarten Dekkers", 
-  "width": 13, 
-  "height": 4, 
-  "layouts": {
-    "LAYOUT": {
-      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}]
-    }
-  }
-}
diff --git a/keyboards/maartenwut/atom47/rev3/rev3.c b/keyboards/maartenwut/atom47/rev3/rev3.c
deleted file mode 100644
index c541ed559c..0000000000
--- a/keyboards/maartenwut/atom47/rev3/rev3.c
+++ /dev/null
@@ -1,27 +0,0 @@
-#include "rev3.h"
-#include "led.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-};
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    DDRE |= (1 << 6);
-
-	//Set output high, so the capslock led is off
-	PORTE |= (1 << 6);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    led_set_user(usb_led);
-}
diff --git a/keyboards/maartenwut/atom47/rev3/rev3.h b/keyboards/maartenwut/atom47/rev3/rev3.h
deleted file mode 100644
index ad875bb404..0000000000
--- a/keyboards/maartenwut/atom47/rev3/rev3.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef ATOM47_REV3_H
-#define ATOM47_REV3_H
-
-#include "quantum.h"
-
-// readability
-#define XXX KC_NO
-
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
-	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
-	k30, k31, k32, k33,      k35,      k37,      k39, k3a, k3b, k3c \
-) \
-{ \
-    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
-	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
-	{k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \
-	{k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c}  \
-}
-
-
-#endif
diff --git a/keyboards/maartenwut/atom47/rev3/rules.mk b/keyboards/maartenwut/atom47/rev3/rules.mk
deleted file mode 100644
index 2df225e389..0000000000
--- a/keyboards/maartenwut/atom47/rev3/rules.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-NKRO_ENABLE = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality
diff --git a/keyboards/maartenwut/atom47/rules.mk b/keyboards/maartenwut/atom47/rules.mk
deleted file mode 100644
index 7fdd5ad48f..0000000000
--- a/keyboards/maartenwut/atom47/rules.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = qmk-dfu
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = no	# Console for debug
-COMMAND_ENABLE = no    # Commands for debug and configuration
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-MIDI_ENABLE = no 		# MIDI controls
-AUDIO_ENABLE = no
-UNICODE_ENABLE = no 		# Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-
-DEFAULT_FOLDER = maartenwut/atom47/rev3
author	James Young <18669334+noroadsleft@users.noreply.github.com>	2020-11-28 12:02:18 -0800
committer	GitHub <noreply@github.com>	2020-11-28 12:02:18 -0800
commit	c66df1664497546f32662409778731143e45a552 (patch)
tree	da73a2d532a27685a31d932b3a44a707d4a3af81 /keyboards/maartenwut/atom47
parent	15385d4113414d42bd062c60c9de5df797d3157f (diff)