From c66df1664497546f32662409778731143e45a552 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 28 Nov 2020 12:02:18 -0800 Subject: 2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change --- .../maartenwut/atom47/keymaps/LEdiodes/keymap.c | 33 ----- .../maartenwut/atom47/keymaps/LEdiodes/rules.mk | 64 --------- .../maartenwut/atom47/keymaps/default/keymap.c | 50 ------- .../maartenwut/atom47/keymaps/default/readme.md | 1 - .../maartenwut/atom47/keymaps/junonum_a47/keymap.c | 150 --------------------- .../atom47/keymaps/junonum_a47/readme.md | 1 - .../maartenwut/atom47/keymaps/maartenwut/keymap.c | 68 ---------- .../maartenwut/atom47/keymaps/maartenwut/readme.md | 1 - keyboards/maartenwut/atom47/readme.md | 26 ---- keyboards/maartenwut/atom47/rev2/config.h | 68 ---------- keyboards/maartenwut/atom47/rev2/info.json | 12 -- keyboards/maartenwut/atom47/rev2/readme.md | 23 ---- keyboards/maartenwut/atom47/rev2/rev2.c | 34 ----- keyboards/maartenwut/atom47/rev2/rev2.h | 25 ---- keyboards/maartenwut/atom47/rev2/rules.mk | 2 - keyboards/maartenwut/atom47/rev3/config.h | 63 --------- keyboards/maartenwut/atom47/rev3/info.json | 12 -- keyboards/maartenwut/atom47/rev3/rev3.c | 27 ---- keyboards/maartenwut/atom47/rev3/rev3.h | 23 ---- keyboards/maartenwut/atom47/rev3/rules.mk | 2 - keyboards/maartenwut/atom47/rules.mk | 28 ---- 21 files changed, 713 deletions(-) delete mode 100644 keyboards/maartenwut/atom47/keymaps/LEdiodes/keymap.c delete mode 100644 keyboards/maartenwut/atom47/keymaps/LEdiodes/rules.mk delete mode 100644 keyboards/maartenwut/atom47/keymaps/default/keymap.c delete mode 100644 keyboards/maartenwut/atom47/keymaps/default/readme.md delete mode 100644 keyboards/maartenwut/atom47/keymaps/junonum_a47/keymap.c delete mode 100644 keyboards/maartenwut/atom47/keymaps/junonum_a47/readme.md delete mode 100644 keyboards/maartenwut/atom47/keymaps/maartenwut/keymap.c delete mode 100644 keyboards/maartenwut/atom47/keymaps/maartenwut/readme.md delete mode 100644 keyboards/maartenwut/atom47/readme.md delete mode 100644 keyboards/maartenwut/atom47/rev2/config.h delete mode 100644 keyboards/maartenwut/atom47/rev2/info.json delete mode 100644 keyboards/maartenwut/atom47/rev2/readme.md delete mode 100644 keyboards/maartenwut/atom47/rev2/rev2.c delete mode 100644 keyboards/maartenwut/atom47/rev2/rev2.h delete mode 100644 keyboards/maartenwut/atom47/rev2/rules.mk delete mode 100644 keyboards/maartenwut/atom47/rev3/config.h delete mode 100644 keyboards/maartenwut/atom47/rev3/info.json delete mode 100644 keyboards/maartenwut/atom47/rev3/rev3.c delete mode 100644 keyboards/maartenwut/atom47/rev3/rev3.h delete mode 100644 keyboards/maartenwut/atom47/rev3/rules.mk delete mode 100644 keyboards/maartenwut/atom47/rules.mk (limited to 'keyboards/maartenwut/atom47') diff --git a/keyboards/maartenwut/atom47/keymaps/LEdiodes/keymap.c b/keyboards/maartenwut/atom47/keymaps/LEdiodes/keymap.c deleted file mode 100644 index 87e1244214..0000000000 --- a/keyboards/maartenwut/atom47/keymaps/LEdiodes/keymap.c +++ /dev/null @@ -1,33 +0,0 @@ -#include QMK_KEYBOARD_H - -// These are all aliases for the function layers. -#define _L0 0 -#define _L1 1 -#define _L2 2 -#define _L3 3 - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_L0] = LAYOUT( - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_L1), \ - KC_LCTL, KC_LGUI, KC_LALT, TG(_L3), KC_SPC, KC_SPC, MO(_L2), KC_RALT, KC_APP, KC_RCTRL), \ - -[_L2] = LAYOUT( - _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \ - _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ - -[_L1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ - _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ - -[_L3] = LAYOUT( - _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, KC_0, KC_DOT, _______, _______, _______, RESET), \ -}; diff --git a/keyboards/maartenwut/atom47/keymaps/LEdiodes/rules.mk b/keyboards/maartenwut/atom47/keymaps/LEdiodes/rules.mk deleted file mode 100644 index 9334aaf28f..0000000000 --- a/keyboards/maartenwut/atom47/keymaps/LEdiodes/rules.mk +++ /dev/null @@ -1,64 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/maartenwut/atom47/keymaps/default/keymap.c b/keyboards/maartenwut/atom47/keymaps/default/keymap.c deleted file mode 100644 index dc87b5a52b..0000000000 --- a/keyboards/maartenwut/atom47/keymaps/default/keymap.c +++ /dev/null @@ -1,50 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -#define _MA 0 //Main layer -#define _FN 1 //Fn -#define _FN1 2 //Fn1 -#define _PN 3 //Pn - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_MA] = LAYOUT( - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_FN1), \ - KC_LCTL, KC_LGUI, KC_LALT, MO(_PN), KC_SPC, KC_SPC, MO(_FN), KC_RALT, KC_APP, KC_RCTRL), \ - -[_FN] = LAYOUT( - _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \ - KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \ - _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ - -[_FN1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ - _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ - -[_PN] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, \ - RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), -}; - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<event.pressed) { - persistant_default_layer_set(1UL<<_MAIN); - } - return false; - break; */ - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; -/* case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; */ - } - return true; -} - -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - // Turn capslock on - writePinLow(E6); - - - } else { - // Turn capslock off - writePinHigh(E6); - } -} diff --git a/keyboards/maartenwut/atom47/keymaps/junonum_a47/readme.md b/keyboards/maartenwut/atom47/keymaps/junonum_a47/readme.md deleted file mode 100644 index 42d8370231..0000000000 --- a/keyboards/maartenwut/atom47/keymaps/junonum_a47/readme.md +++ /dev/null @@ -1 +0,0 @@ -Juno's junonum keymap adapted for Atom47. \ No newline at end of file diff --git a/keyboards/maartenwut/atom47/keymaps/maartenwut/keymap.c b/keyboards/maartenwut/atom47/keymaps/maartenwut/keymap.c deleted file mode 100644 index c01ace92a9..0000000000 --- a/keyboards/maartenwut/atom47/keymaps/maartenwut/keymap.c +++ /dev/null @@ -1,68 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -#define _MA 0 //Main layer -#define _LO 1 //FN1 -#define _RA 2 //FN - -enum custom_keycodes { - CTRLZ = SAFE_RANGE, - CTRLX, - CTRLC, - CTRLV -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_MA] = LAYOUT( - KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ - KC_LCTL, KC_LGUI, KC_LALT, MO(_LO), KC_SPC, KC_SPC, MO(_RA), KC_RALT, KC_APP, KC_RCTRL), \ - -[_LO] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ - _______, CTRLZ, CTRLX, CTRLC, CTRLV, _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), \ - -[_RA] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______, _______, \ - KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ - -}; - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1<event.pressed) { - switch(keycode) { - case CTRLZ: - SEND_STRING(SS_LCTRL("z")); - return false; - case CTRLX: - SEND_STRING(SS_LCTRL("x")); - return false; - case CTRLC: - SEND_STRING(SS_LCTRL("c")); - return false; - case CTRLV: - SEND_STRING(SS_LCTRL("v")); - return false; - } - } - return true; -}; diff --git a/keyboards/maartenwut/atom47/keymaps/maartenwut/readme.md b/keyboards/maartenwut/atom47/keymaps/maartenwut/readme.md deleted file mode 100644 index 6795953857..0000000000 --- a/keyboards/maartenwut/atom47/keymaps/maartenwut/readme.md +++ /dev/null @@ -1 +0,0 @@ -This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control. diff --git a/keyboards/maartenwut/atom47/readme.md b/keyboards/maartenwut/atom47/readme.md deleted file mode 100644 index c3cffcea74..0000000000 --- a/keyboards/maartenwut/atom47/readme.md +++ /dev/null @@ -1,26 +0,0 @@ -# Atom47 - -![Atom47](https://i.imgur.com/Wwflqvt.png) - -## Support -Keyboard Maintainer: [Maarten Dekkers](https://github.com/maartenwut) -Hardware Supported: Atom47 rev2/rev3 -Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221) - - -## Features (rev3 and up) -- QMK Firmware -- 6 Underglow RGB leds -- In-switch leds -- Through-hole micro usb connector (less likely to break off!) -- South facing leds for the QMX/Zealencio users -- Multiple layouts -- Easily reachable reset button under the spacebar -- CapsLock indicator - -## Build -To build the default keymap for the latest revision, simply run `make atom47:default`. Specifiy the revision like so: `make atom47/rev3:default`. - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - -![Atom47](https://i.imgur.com/JfYnOba.jpg) diff --git a/keyboards/maartenwut/atom47/rev2/config.h b/keyboards/maartenwut/atom47/rev2/config.h deleted file mode 100644 index c38cd450ed..0000000000 --- a/keyboards/maartenwut/atom47/rev2/config.h +++ /dev/null @@ -1,68 +0,0 @@ -/* -Copyright 2012 Maarten Dekkers . -*/ - -#ifndef REV2_CONFIG_H -#define REV2_CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0003 -#define MANUFACTURER Vortex -#define PRODUCT Core -#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.2 - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 13 - -// ROWS: Top to bottom, COLS: Left to right - -#define MATRIX_ROW_PINS {B1,B2,B3,B7} -#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4} -#define UNUSED_PINS - -#define BACKLIGHT_PIN B6 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* Backlight configuration - */ -#define BACKLIGHT_LEVELS 4 - -#define RGB_DI_PIN D0 // The pin the LED strip is connected to -#define RGBLED_NUM 1 // Number of LEDs in your strip - -#define QMK_ESC_OUTPUT D7 // usually COL -#define QMK_ESC_INPUT B1 // usually ROW -#define QMK_LED B6 - -#endif diff --git a/keyboards/maartenwut/atom47/rev2/info.json b/keyboards/maartenwut/atom47/rev2/info.json deleted file mode 100644 index 3c45ca8d45..0000000000 --- a/keyboards/maartenwut/atom47/rev2/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Atom47", - "url": "https://atomkb.eu/atom47", - "maintainer": "Maarten Dekkers", - "width": 13, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}] - } - } -} diff --git a/keyboards/maartenwut/atom47/rev2/readme.md b/keyboards/maartenwut/atom47/rev2/readme.md deleted file mode 100644 index b63e1bb44c..0000000000 --- a/keyboards/maartenwut/atom47/rev2/readme.md +++ /dev/null @@ -1,23 +0,0 @@ -# Atom47 rev2 - -This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it. - -## Support -Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot) -Hardware Supported: Atom47 rev2 -Hardware Availability: None - - -## Features -- QMK Firmware -- In-switch leds -- Through-hole micro usb connector (less likely to break off!) -- Easily reachable reset button under the spacebar -- In-switch CapsLock indicator - -## Build -To build the default keymap, simply run `make atom47/rev2:default`. - -For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`. - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/maartenwut/atom47/rev2/rev2.c b/keyboards/maartenwut/atom47/rev2/rev2.c deleted file mode 100644 index 06fce06dad..0000000000 --- a/keyboards/maartenwut/atom47/rev2/rev2.c +++ /dev/null @@ -1,34 +0,0 @@ -#include "rev2.h" -#include "led.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -}; - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -}; - -void led_init_ports(void) { - // * Set our LED pins as output - DDRB &= ~(1<<5); - - //Set output high, so the capslock led is off - PORTB |= (1 << 5); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1<. -*/ - -#ifndef REV3_CONFIG_H -#define REV3_CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0003 -#define MANUFACTURER Vortex -#define PRODUCT Core -#define DESCRIPTION Atom47 PCB for the Vortex Core Rev.3 - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 13 - -// ROWS: Top to bottom, COLS: Left to right - -#define MATRIX_ROW_PINS {B3,B2,B1,B0} -#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7} -#define UNUSED_PINS - -#define BACKLIGHT_PIN B6 - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Backlight configuration - */ -#define BACKLIGHT_LEVELS 4 - -#define RGB_DI_PIN F5 // The pin the LED strip is connected to -#define RGBLED_NUM 6 // Number of LEDs in your strip -#define RGBLIGHT_ANIMATIONS -#define QMK_ESC_OUTPUT B7 // usually COL -#define QMK_ESC_INPUT B3 // usually ROW -#define QMK_LED E6 - -#endif diff --git a/keyboards/maartenwut/atom47/rev3/info.json b/keyboards/maartenwut/atom47/rev3/info.json deleted file mode 100644 index 3c45ca8d45..0000000000 --- a/keyboards/maartenwut/atom47/rev3/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Atom47", - "url": "https://atomkb.eu/atom47", - "maintainer": "Maarten Dekkers", - "width": 13, - "height": 4, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3, "w":1.75}, {"x":6, "y":3, "w":2.75}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3, "w":1.25}] - } - } -} diff --git a/keyboards/maartenwut/atom47/rev3/rev3.c b/keyboards/maartenwut/atom47/rev3/rev3.c deleted file mode 100644 index c541ed559c..0000000000 --- a/keyboards/maartenwut/atom47/rev3/rev3.c +++ /dev/null @@ -1,27 +0,0 @@ -#include "rev3.h" -#include "led.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -}; - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -}; - -void led_init_ports(void) { - // * Set our LED pins as output - DDRE |= (1 << 6); - - //Set output high, so the capslock led is off - PORTE |= (1 << 6); -} - -void led_set_kb(uint8_t usb_led) { - led_set_user(usb_led); -} diff --git a/keyboards/maartenwut/atom47/rev3/rev3.h b/keyboards/maartenwut/atom47/rev3/rev3.h deleted file mode 100644 index ad875bb404..0000000000 --- a/keyboards/maartenwut/atom47/rev3/rev3.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef ATOM47_REV3_H -#define ATOM47_REV3_H - -#include "quantum.h" - -// readability -#define XXX KC_NO - -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ - k30, k31, k32, k33, k35, k37, k39, k3a, k3b, k3c \ -) \ -{ \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \ - {k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \ - {k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c} \ -} - - -#endif diff --git a/keyboards/maartenwut/atom47/rev3/rules.mk b/keyboards/maartenwut/atom47/rev3/rules.mk deleted file mode 100644 index 2df225e389..0000000000 --- a/keyboards/maartenwut/atom47/rev3/rules.mk +++ /dev/null @@ -1,2 +0,0 @@ -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality diff --git a/keyboards/maartenwut/atom47/rules.mk b/keyboards/maartenwut/atom47/rules.mk deleted file mode 100644 index 7fdd5ad48f..0000000000 --- a/keyboards/maartenwut/atom47/rules.mk +++ /dev/null @@ -1,28 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = qmk-dfu - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID - -DEFAULT_FOLDER = maartenwut/atom47/rev3 -- cgit v1.2.3