diff options
author | Nick Brassel <nick@tzarc.org> | 2021-08-29 08:20:25 +1000 |
---|---|---|
committer | Nick Brassel <nick@tzarc.org> | 2021-08-29 08:20:25 +1000 |
commit | f061ca497464fe85284906fb163a33eaee7a91ef (patch) | |
tree | 33ef1bfb529aed382e8526c607c4e18717f92571 /keyboards/converter/ibm_5291/readme.md | |
parent | ff65185dec6f97be1eb49f17cea526a0d0bbf3d6 (diff) | |
parent | 4bad375d7c09d949a9dcdd4feba147c9c7a67ec6 (diff) |
Breaking changes develop merge to master, 2021Q3 edition. (#14196)
Diffstat (limited to 'keyboards/converter/ibm_5291/readme.md')
-rw-r--r-- | keyboards/converter/ibm_5291/readme.md | 72 |
1 files changed, 0 insertions, 72 deletions
diff --git a/keyboards/converter/ibm_5291/readme.md b/keyboards/converter/ibm_5291/readme.md deleted file mode 100644 index 03406d3f9d..0000000000 --- a/keyboards/converter/ibm_5291/readme.md +++ /dev/null @@ -1,72 +0,0 @@ -# IBM 5291 keyboard converter - -[IBM 5291](https://deskthority.net/wiki/IBM_Model_F#IBM_5291_Keyboard) - -A converter for the eponymous keyboard. - -Keyboard Maintainer: [Listofoptions](https://github.com/listofoptions) -Hardware Supported: IBM 5291, Teensy 2.0 - -Make example for this keyboard (after setting up your build environment): - - make converter/ibm_5291:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - - -The pinout is as follows: - -IBM−5291−Cable to Pinhead−14 - -| pin | description -----|------------------------ -1 | GND -2 | NC -3 | GND -4 | GN) -5 | +5V -6 | D0 -7 | D1 -8 | D2 -9 | D3 -10| D4 -11| D5 -12| D6 -13| Strobe -14| Out - -The pins on this connector are organized -![here](https://geekhack.org/index.php?action=dlattach;topic=48950.0;attach=36759;image) - -IBM−5291−2 Cable with DB15M connector - -| pin | description -----|------------- -|1,2,3 | GND -|4 | +5V -|5 | D0 -|6 | D1 -|7 | D2 -|8 | D3 -|9 | D4 -|10 | D5 -|11 | D6 -|12 | Strobe -|13 | Out -|14 | PE -|15 | NC - -The above connector is actually numbered so it should be easier to determine -where the needed connections are. - -To connect to the teensy, the following are pins are needed (if you should choose not set your own): - -* PB0 -> PB6 are connected to D0 -> D6 -* +5V is connected to the corresponding teensy pin -* gnd is as well, only one of the gnd pins needs to be connected though. -* strobe is connected to pin PD1 -* data is connected to PD0 -* PE does not need to be connected to anything, but it could also be connected to gnd - -sources: - http://www.retrocomputing.eu/documents/5291_MaintenanceLibrary.pdf |