From 6747890562d7580a8d9b82df764322bdcd294a3b Mon Sep 17 00:00:00 2001
From: Nick Brassel <nick@tzarc.org>
Date: Sat, 24 Jul 2021 01:17:15 +1000
Subject: [Keyboard] Remove broken, unmaintained converter/ibm_5291 (#13658)

---
 keyboards/converter/ibm_5291/readme.md | 72 ----------------------------------
 1 file changed, 72 deletions(-)
 delete mode 100644 keyboards/converter/ibm_5291/readme.md

(limited to 'keyboards/converter/ibm_5291/readme.md')

diff --git a/keyboards/converter/ibm_5291/readme.md b/keyboards/converter/ibm_5291/readme.md
deleted file mode 100644
index 03406d3f9d..0000000000
--- a/keyboards/converter/ibm_5291/readme.md
+++ /dev/null
@@ -1,72 +0,0 @@
-# IBM 5291 keyboard converter
-
-[IBM 5291](https://deskthority.net/wiki/IBM_Model_F#IBM_5291_Keyboard)
-
-A converter for the eponymous keyboard.
-
-Keyboard Maintainer: [Listofoptions](https://github.com/listofoptions)  
-Hardware Supported: IBM 5291, Teensy 2.0  
-
-Make example for this keyboard (after setting up your build environment):
-
-    make converter/ibm_5291:default
-    
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-
-The pinout is as follows:
-
-IBM−5291−Cable to Pinhead−14 
-
-| pin | description
-----|------------------------
-1 | GND   
-2 | NC    
-3 | GND   
-4 | GN)   
-5 | +5V   
-6 | D0    
-7 | D1    
-8 | D2    
-9 | D3    
-10| D4    
-11| D5    
-12| D6    
-13| Strobe
-14| Out   
-
-The pins on this connector are organized  
-![here](https://geekhack.org/index.php?action=dlattach;topic=48950.0;attach=36759;image)
-
-IBM−5291−2 Cable with DB15M connector
-
-| pin | description
-----|-------------
-|1,2,3 | GND
-|4     | +5V
-|5     | D0
-|6     | D1
-|7     | D2
-|8     | D3
-|9     | D4
-|10    | D5
-|11    | D6
-|12    | Strobe
-|13    | Out
-|14    | PE 
-|15    | NC
-
-The above connector is actually numbered so it should be easier to determine
-where the needed connections are.
-
-To connect to the teensy, the following are pins are needed (if you should choose not set your own):
-
-* PB0 -> PB6 are connected to D0 -> D6
-* +5V is connected to the corresponding teensy pin
-* gnd is as well, only one of the gnd pins needs to be connected though.
-* strobe is connected to pin PD1
-* data is connected to PD0
-* PE does not need to be connected to anything, but it could also be connected to gnd 
-
-sources:
-    http://www.retrocomputing.eu/documents/5291_MaintenanceLibrary.pdf
-- 
cgit v1.2.3