Update ISSI LED types (#22099)

2 files changed, 7 insertions, 7 deletions

diff --git a/docs/feature_led_matrix.md b/docs/feature_led_matrix.md
index 3f91146708..87f4f36f1d 100644
--- a/docs/feature_led_matrix.md
+++ b/docs/feature_led_matrix.md
@@ -51,12 +51,12 @@ Here is an example using 2 drivers.
 
 !> Note the parentheses, this is so when `LED_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)` will give very different results than `rand() % LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL`.
 
-For split keyboards using `LED_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31_leds`.
+For split keyboards using `LED_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31fl3731_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31fl3731_leds`.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const is31_led PROGMEM g_is31_leds[LED_MATRIX_LED_COUNT] = {
+const is31fl3731_led_t PROGMEM g_is31fl3731_leds[LED_MATRIX_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *    driver
  *    |  LED address
diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md
index 5222209e57..82b45583ec 100644
--- a/docs/feature_rgb_matrix.md
+++ b/docs/feature_rgb_matrix.md
@@ -52,12 +52,12 @@ Here is an example using 2 drivers.
 
 !> Note the parentheses, this is so when `RGB_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
 
-For split keyboards using `RGB_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31_leds`.
+For split keyboards using `RGB_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31fl3731_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31fl3731_leds`.
 
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *   driver
  *   |  R location
@@ -143,7 +143,7 @@ Currently only 4 drivers are supported, but it would be trivial to support all 8
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+const is31fl3733_led_t PROGMEM g_is31fl3733_leds[RGB_MATRIX_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *   driver
  *   |  R location
@@ -224,7 +224,7 @@ Here is an example using 2 drivers.
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+const is31fl3736_led_t PROGMEM g_is31fl3736_leds[RGB_MATRIX_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *   driver
  *   |  R location
@@ -300,7 +300,7 @@ Here is an example using 2 drivers.
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 
 ```c
-const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+const is31fl3737_led_t PROGMEM g_is31fl3737_leds[RGB_MATRIX_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *   driver
  *   |  R location