diff options
Diffstat (limited to 'docs/feature_rgb_matrix.md')
| -rw-r--r-- | docs/feature_rgb_matrix.md | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 5222209e57..82b45583ec 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -52,12 +52,12 @@ Here is an example using 2 drivers. !> Note the parentheses, this is so when `RGB_MATRIX_LED_COUNT` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`. -For split keyboards using `RGB_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31_leds`. +For split keyboards using `RGB_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31fl3731_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31fl3731_leds`. Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -143,7 +143,7 @@ Currently only 4 drivers are supported, but it would be trivial to support all 8 Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3733_led_t PROGMEM g_is31fl3733_leds[RGB_MATRIX_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -224,7 +224,7 @@ Here is an example using 2 drivers. Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3736_led_t PROGMEM g_is31fl3736_leds[RGB_MATRIX_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -300,7 +300,7 @@ Here is an example using 2 drivers. Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3737_led_t PROGMEM g_is31fl3737_leds[RGB_MATRIX_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location |