Add EC Type-K (#23193)

14 files changed, 1445 insertions, 0 deletions

diff --git a/keyboards/cipulot/ec_typek/config.h b/keyboards/cipulot/ec_typek/config.h
new file mode 100644
index 0000000000..a6619c600c
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/config.h
@@ -0,0 +1,81 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define MATRIX_ROW_PINS \
+    { B14, B13, B12, A6, A7 }
+
+#define AMUX_COUNT 2
+#define AMUX_MAX_COLS_COUNT 8
+
+#define AMUX_EN_PINS \
+    { B9, B8 }
+
+#define AMUX_SEL_PINS \
+    { B7, B6, B5 }
+
+#define AMUX_COL_CHANNELS_SIZES \
+    { 7, 8 }
+
+#define AMUX_0_COL_CHANNELS \
+    { 3, 0, 1, 2, 4, 6, 7 }
+
+#define AMUX_1_COL_CHANNELS \
+    { 3, 0, 1, 2, 4, 6, 7, 5 }
+
+#define AMUX_COL_CHANNELS AMUX_0_COL_CHANNELS, AMUX_1_COL_CHANNELS
+
+#define DISCHARGE_PIN A1
+#define ANALOG_PORT A2
+
+#define DEFAULT_ACTUATION_MODE 0
+#define DEFAULT_MODE_0_ACTUATION_LEVEL 550
+#define DEFAULT_MODE_0_RELEASE_LEVEL 500
+#define DEFAULT_MODE_1_INITIAL_DEADZONE_OFFSET DEFAULT_MODE_0_ACTUATION_LEVEL
+#define DEFAULT_MODE_1_ACTUATION_OFFSET 70
+#define DEFAULT_MODE_1_RELEASE_OFFSET 70
+#define DEFAULT_EXTREMUM 1023
+#define EXPECTED_NOISE_FLOOR 0
+#define NOISE_FLOOR_THRESHOLD 50
+#define BOTTOMING_CALIBRATION_THRESHOLD 100
+#define DEFAULT_NOISE_FLOOR_SAMPLING_COUNT 30
+#define DEFAULT_BOTTOMING_READING 1023
+#define DEFAULT_CALIBRATION_STARTER true
+
+#define DISCHARGE_TIME 10
+
+// #define DEBUG_MATRIX_SCAN_RATE
+
+#define EECONFIG_KB_DATA_SIZE 171
+
+// RGB & Indicators
+// PWM driver with direct memory access (DMA) support
+#define WS2812_PWM_COMPLEMENTARY_OUTPUT
+#define WS2812_PWM_DRIVER PWMD1
+#define WS2812_PWM_CHANNEL 3
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA2_STREAM5
+#define WS2812_DMA_CHANNEL 6
+#define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM1_UP
+
+#define RGBLIGHT_DEFAULT_VAL 200
+#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 5)
+
+#define NUM_INDICATOR_INDEX 2
+#define CAPS_INDICATOR_INDEX 1
+#define SCROLL_INDICATOR_INDEX 0
diff --git a/keyboards/cipulot/ec_typek/ec_switch_matrix.c b/keyboards/cipulot/ec_typek/ec_switch_matrix.c
new file mode 100644
index 0000000000..da58a75bbc
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/ec_switch_matrix.c
@@ -0,0 +1,318 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ec_switch_matrix.h"
+#include "analog.h"
+#include "atomic_util.h"
+#include "math.h"
+#include "print.h"
+#include "wait.h"
+
+#if defined(__AVR__)
+#    error "AVR platforms not supported due to a variety of reasons. Among them there are limited memory, limited number of pins and ADC not being able to give satisfactory results."
+#endif
+
+#define OPEN_DRAIN_SUPPORT defined(PAL_MODE_OUTPUT_OPENDRAIN)
+
+eeprom_ec_config_t eeprom_ec_config;
+ec_config_t        ec_config;
+
+// Pin and port array
+const pin_t row_pins[]                                 = MATRIX_ROW_PINS;
+const pin_t amux_sel_pins[]                            = AMUX_SEL_PINS;
+const pin_t amux_en_pins[]                             = AMUX_EN_PINS;
+const pin_t amux_n_col_sizes[]                         = AMUX_COL_CHANNELS_SIZES;
+const pin_t amux_n_col_channels[][AMUX_MAX_COLS_COUNT] = {AMUX_COL_CHANNELS};
+
+#define AMUX_SEL_PINS_COUNT ARRAY_SIZE(amux_sel_pins)
+#define EXPECTED_AMUX_SEL_PINS_COUNT ceil(log2(AMUX_MAX_COLS_COUNT)
+// Checks for the correctness of the configuration
+_Static_assert(ARRAY_SIZE(amux_en_pins) == AMUX_COUNT, "AMUX_EN_PINS doesn't have the minimum number of bits required to enable all the multiplexers available");
+// Check that number of select pins is enough to select all the channels
+_Static_assert(AMUX_SEL_PINS_COUNT == EXPECTED_AMUX_SEL_PINS_COUNT), "AMUX_SEL_PINS doesn't have the minimum number of bits required address all the channels");
+// Check that number of elements in AMUX_COL_CHANNELS_SIZES is enough to specify the number of channels for all the multiplexers available
+_Static_assert(ARRAY_SIZE(amux_n_col_sizes) == AMUX_COUNT, "AMUX_COL_CHANNELS_SIZES doesn't have the minimum number of elements required to specify the number of channels for all the multiplexers available");
+// static ec_config_t config;
+static uint16_t sw_value[MATRIX_ROWS][MATRIX_COLS];
+
+static adc_mux adcMux;
+
+// Initialize the row pins
+void init_row(void) {
+    // Set all row pins as output and low
+    for (uint8_t idx = 0; idx < MATRIX_ROWS; idx++) {
+        gpio_set_pin_output(row_pins[idx]);
+        gpio_write_pin_low(row_pins[idx]);
+    }
+}
+
+// Initialize the multiplexers
+void init_amux(void) {
+    for (uint8_t idx = 0; idx < AMUX_COUNT; idx++) {
+        gpio_set_pin_output(amux_en_pins[idx]);
+        gpio_write_pin_low(amux_en_pins[idx]);
+    }
+    for (uint8_t idx = 0; idx < AMUX_SEL_PINS_COUNT; idx++) {
+        gpio_set_pin_output(amux_sel_pins[idx]);
+    }
+}
+
+// Select the multiplexer channel of the specified multiplexer
+void select_amux_channel(uint8_t channel, uint8_t col) {
+    // Get the channel for the specified multiplexer
+    uint8_t ch = amux_n_col_channels[channel][col];
+    // momentarily disable specified multiplexer
+    gpio_write_pin_high(amux_en_pins[channel]);
+    // Select the multiplexer channel
+    for (uint8_t i = 0; i < AMUX_SEL_PINS_COUNT; i++) {
+        gpio_write_pin(amux_sel_pins[i], ch & (1 << i));
+    }
+    // re enable specified multiplexer
+    gpio_write_pin_low(amux_en_pins[channel]);
+}
+
+// Disable all the unused multiplexers
+void disable_unused_amux(uint8_t channel) {
+    // disable all the other multiplexers apart from the current selected one
+    for (uint8_t idx = 0; idx < AMUX_COUNT; idx++) {
+        if (idx != channel) {
+            gpio_write_pin_high(amux_en_pins[idx]);
+        }
+    }
+}
+// Discharge the peak hold capacitor
+void discharge_capacitor(void) {
+#ifdef OPEN_DRAIN_SUPPORT
+    gpio_write_pin_low(DISCHARGE_PIN);
+#else
+    gpio_write_pin_low(DISCHARGE_PIN);
+    gpio_set_pin_output(DISCHARGE_PIN);
+#endif
+}
+
+// Charge the peak hold capacitor
+void charge_capacitor(uint8_t row) {
+#ifdef OPEN_DRAIN_SUPPORT
+    gpio_write_pin_high(DISCHARGE_PIN);
+#else
+    gpio_set_pin_input(DISCHARGE_PIN);
+#endif
+    gpio_write_pin_high(row_pins[row]);
+}
+
+// Initialize the peripherals pins
+int ec_init(void) {
+    // Initialize ADC
+    palSetLineMode(ANALOG_PORT, PAL_MODE_INPUT_ANALOG);
+    adcMux = pinToMux(ANALOG_PORT);
+
+    // Dummy call to make sure that adcStart() has been called in the appropriate state
+    adc_read(adcMux);
+
+    // Initialize discharge pin as discharge mode
+    gpio_write_pin_low(DISCHARGE_PIN);
+#ifdef OPEN_DRAIN_SUPPORT
+    gpio_set_pin_output_open_drain(DISCHARGE_PIN);
+#else
+    gpio_set_pin_output(DISCHARGE_PIN);
+#endif
+
+    // Initialize drive lines
+    init_row();
+
+    // Initialize AMUXs
+    init_amux();
+
+    return 0;
+}
+
+// Get the noise floor
+void ec_noise_floor(void) {
+    // Initialize the noise floor
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+            ec_config.noise_floor[row][col] = 0;
+        }
+    }
+
+    // Sample the noise floor
+    for (uint8_t i = 0; i < DEFAULT_NOISE_FLOOR_SAMPLING_COUNT; i++) {
+        for (uint8_t amux = 0; amux < AMUX_COUNT; amux++) {
+            disable_unused_amux(amux);
+            for (uint8_t col = 0; col < amux_n_col_sizes[amux]; col++) {
+                uint8_t sum = 0;
+                for (uint8_t i = 0; i < (amux > 0 ? amux : 0); i++)
+                    sum += amux_n_col_sizes[i];
+                uint8_t adjusted_col = col + sum;
+                for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+                    ec_config.noise_floor[row][adjusted_col] += ec_readkey_raw(amux, row, col);
+                }
+            }
+        }
+        wait_ms(5);
+    }
+
+    // Average the noise floor
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+            ec_config.noise_floor[row][col] /= DEFAULT_NOISE_FLOOR_SAMPLING_COUNT;
+        }
+    }
+}
+
+// Scan key values and update matrix state
+bool ec_matrix_scan(matrix_row_t current_matrix[]) {
+    bool updated = false;
+
+    for (uint8_t amux = 0; amux < AMUX_COUNT; amux++) {
+        disable_unused_amux(amux);
+        for (uint8_t col = 0; col < amux_n_col_sizes[amux]; col++) {
+            for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+                uint8_t sum = 0;
+                for (uint8_t i = 0; i < (amux > 0 ? amux : 0); i++)
+                    sum += amux_n_col_sizes[i];
+                uint8_t adjusted_col        = col + sum;
+                sw_value[row][adjusted_col] = ec_readkey_raw(amux, row, col);
+
+                if (ec_config.bottoming_calibration) {
+                    if (ec_config.bottoming_calibration_starter[row][adjusted_col]) {
+                        ec_config.bottoming_reading[row][adjusted_col]             = sw_value[row][adjusted_col];
+                        ec_config.bottoming_calibration_starter[row][adjusted_col] = false;
+                    } else if (sw_value[row][adjusted_col] > ec_config.bottoming_reading[row][adjusted_col]) {
+                        ec_config.bottoming_reading[row][adjusted_col] = sw_value[row][adjusted_col];
+                    }
+                } else {
+                    updated |= ec_update_key(&current_matrix[row], row, adjusted_col, sw_value[row][adjusted_col]);
+                }
+            }
+        }
+    }
+
+    return ec_config.bottoming_calibration ? false : updated;
+}
+
+// Read the capacitive sensor value
+uint16_t ec_readkey_raw(uint8_t channel, uint8_t row, uint8_t col) {
+    uint16_t sw_value = 0;
+
+    // Select the multiplexer
+    select_amux_channel(channel, col);
+
+    // Set the row pin to low state to avoid ghosting
+    gpio_write_pin_low(row_pins[row]);
+
+    ATOMIC_BLOCK_FORCEON {
+        // Set the row pin to high state and have capacitor charge
+        charge_capacitor(row);
+        // Read the ADC value
+        sw_value = adc_read(adcMux);
+    }
+    // Discharge peak hold capacitor
+    discharge_capacitor();
+    // Waiting for the ghost capacitor to discharge fully
+    wait_us(DISCHARGE_TIME);
+
+    return sw_value;
+}
+
+// Update press/release state of key
+bool ec_update_key(matrix_row_t* current_row, uint8_t row, uint8_t col, uint16_t sw_value) {
+    bool current_state = (*current_row >> col) & 1;
+
+    // Real Time Noise Floor Calibration
+    if (sw_value < (ec_config.noise_floor[row][col] - NOISE_FLOOR_THRESHOLD)) {
+        uprintf("Noise Floor Change: %d, %d, %d\n", row, col, sw_value);
+        ec_config.noise_floor[row][col]                             = sw_value;
+        ec_config.rescaled_mode_0_actuation_threshold[row][col]     = rescale(ec_config.mode_0_actuation_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+        ec_config.rescaled_mode_0_release_threshold[row][col]       = rescale(ec_config.mode_0_release_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+        ec_config.rescaled_mode_1_initial_deadzone_offset[row][col] = rescale(ec_config.mode_1_initial_deadzone_offset, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+    }
+
+    // Normal board-wide APC
+    if (ec_config.actuation_mode == 0) {
+        if (current_state && sw_value < ec_config.rescaled_mode_0_release_threshold[row][col]) {
+            *current_row &= ~(1 << col);
+            uprintf("Key released: %d, %d, %d\n", row, col, sw_value);
+            return true;
+        }
+        if ((!current_state) && sw_value > ec_config.rescaled_mode_0_actuation_threshold[row][col]) {
+            *current_row |= (1 << col);
+            uprintf("Key pressed: %d, %d, %d\n", row, col, sw_value);
+            return true;
+        }
+    }
+    // Rapid Trigger
+    else if (ec_config.actuation_mode == 1) {
+        // Is key in active zone?
+        if (sw_value > ec_config.rescaled_mode_1_initial_deadzone_offset[row][col]) {
+            // Is key pressed while in active zone?
+            if (current_state) {
+                // Is the key still moving down?
+                if (sw_value > ec_config.extremum[row][col]) {
+                    ec_config.extremum[row][col] = sw_value;
+                    uprintf("Key pressed: %d, %d, %d\n", row, col, sw_value);
+                }
+                // Has key moved up enough to be released?
+                else if (sw_value < ec_config.extremum[row][col] - ec_config.mode_1_release_offset) {
+                    ec_config.extremum[row][col] = sw_value;
+                    *current_row &= ~(1 << col);
+                    uprintf("Key released: %d, %d, %d\n", row, col, sw_value);
+                    return true;
+                }
+            }
+            // Key is not pressed while in active zone
+            else {
+                // Is the key still moving up?
+                if (sw_value < ec_config.extremum[row][col]) {
+                    ec_config.extremum[row][col] = sw_value;
+                }
+                // Has key moved down enough to be pressed?
+                else if (sw_value > ec_config.extremum[row][col] + ec_config.mode_1_actuation_offset) {
+                    ec_config.extremum[row][col] = sw_value;
+                    *current_row |= (1 << col);
+                    uprintf("Key pressed: %d, %d, %d\n", row, col, sw_value);
+                    return true;
+                }
+            }
+        }
+        // Key is not in active zone
+        else {
+            // Check to avoid key being stuck in pressed state near the active zone threshold
+            if (sw_value < ec_config.extremum[row][col]) {
+                ec_config.extremum[row][col] = sw_value;
+                *current_row &= ~(1 << col);
+                return true;
+            }
+        }
+    }
+    return false;
+}
+
+// Print the matrix values
+void ec_print_matrix(void) {
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+            uprintf("%4d,", sw_value[row][col]);
+        }
+        uprintf("%4d\n", sw_value[row][MATRIX_COLS - 1]);
+    }
+    print("\n");
+}
+
+// Rescale the value to a different range
+uint16_t rescale(uint16_t x, uint16_t in_min, uint16_t in_max, uint16_t out_min, uint16_t out_max) {
+    return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
+}
diff --git a/keyboards/cipulot/ec_typek/ec_switch_matrix.h b/keyboards/cipulot/ec_typek/ec_switch_matrix.h
new file mode 100644
index 0000000000..fad20360bc
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/ec_switch_matrix.h
@@ -0,0 +1,84 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "matrix.h"
+#include "eeconfig.h"
+#include "util.h"
+
+typedef struct _indicator_config_t {
+    uint8_t h;
+    uint8_t s;
+    uint8_t v;
+    bool    enabled;
+} indicator_config;
+
+typedef struct PACKED {
+    indicator_config num;
+    indicator_config caps;
+    indicator_config scroll;
+    uint8_t          actuation_mode;                              // 0: normal board-wide APC, 1: Rapid trigger from specific board-wide actuation point, 2: Rapid trigger from resting point
+    uint16_t         mode_0_actuation_threshold;                  // threshold for key press in mode 0
+    uint16_t         mode_0_release_threshold;                    // threshold for key release in mode 0
+    uint16_t         mode_1_initial_deadzone_offset;              // threshold for key press in mode 1
+    uint8_t          mode_1_actuation_offset;                // offset for key press in mode 1 and 2 (1-255)
+    uint8_t          mode_1_release_offset;                  // offset for key release in mode 1 and 2 (1-255)
+    uint16_t         bottoming_reading[MATRIX_ROWS][MATRIX_COLS]; // bottoming reading
+} eeprom_ec_config_t;
+
+typedef struct {
+    uint8_t  actuation_mode;                                                    // 0: normal board-wide APC, 1: Rapid trigger from specific board-wide actuation point (it can be very near that baseline noise and be "full travel")
+    uint16_t mode_0_actuation_threshold;                                        // threshold for key press in mode 0
+    uint16_t mode_0_release_threshold;                                          // threshold for key release in mode 0
+    uint16_t mode_1_initial_deadzone_offset;                                    // threshold for key press in mode 1 (initial deadzone)
+    uint16_t rescaled_mode_0_actuation_threshold[MATRIX_ROWS][MATRIX_COLS];     // threshold for key press in mode 0 rescaled to actual scale
+    uint16_t rescaled_mode_0_release_threshold[MATRIX_ROWS][MATRIX_COLS];       // threshold for key release in mode 0 rescaled to actual scale
+    uint16_t rescaled_mode_1_initial_deadzone_offset[MATRIX_ROWS][MATRIX_COLS]; // threshold for key press in mode 1 (initial deadzone) rescaled to actual scale
+    uint8_t  mode_1_actuation_offset;                                      // offset for key press in mode 1 (1-255)
+    uint8_t  mode_1_release_offset;                                        // offset for key release in mode 1 (1-255)
+    uint16_t extremum[MATRIX_ROWS][MATRIX_COLS];                                // extremum values for mode 1
+    uint16_t noise_floor[MATRIX_ROWS][MATRIX_COLS];                             // noise floor detected during startup
+    bool     bottoming_calibration;                                             // calibration mode for bottoming out values (true: calibration mode, false: normal mode)
+    bool     bottoming_calibration_starter[MATRIX_ROWS][MATRIX_COLS];           // calibration mode for bottoming out values (true: calibration mode, false: normal mode)
+    uint16_t bottoming_reading[MATRIX_ROWS][MATRIX_COLS];                       // bottoming reading
+} ec_config_t;
+
+// Check if the size of the reserved persistent memory is the same as the size of struct eeprom_ec_config_t
+_Static_assert(sizeof(eeprom_ec_config_t) == EECONFIG_KB_DATA_SIZE, "Mismatch in keyboard EECONFIG stored data");
+
+extern eeprom_ec_config_t eeprom_ec_config;
+
+extern ec_config_t ec_config;
+
+void init_row(void);
+void init_amux(void);
+void select_amux_channel(uint8_t channel, uint8_t col);
+void disable_unused_amux(uint8_t channel);
+void discharge_capacitor(void);
+void charge_capacitor(uint8_t row);
+
+int      ec_init(void);
+void     ec_noise_floor(void);
+bool     ec_matrix_scan(matrix_row_t current_matrix[]);
+uint16_t ec_readkey_raw(uint8_t channel, uint8_t row, uint8_t col);
+bool     ec_update_key(matrix_row_t* current_row, uint8_t row, uint8_t col, uint16_t sw_value);
+void     ec_print_matrix(void);
+
+uint16_t rescale(uint16_t x, uint16_t in_min, uint16_t in_max, uint16_t out_min, uint16_t out_max);
+bool indicators_callback(void);
diff --git a/keyboards/cipulot/ec_typek/ec_typek.c b/keyboards/cipulot/ec_typek/ec_typek.c
new file mode 100644
index 0000000000..035c90303c
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/ec_typek.c
@@ -0,0 +1,119 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ec_switch_matrix.h"
+#include "quantum.h"
+
+void eeconfig_init_kb(void) {
+    // Default values
+    eeprom_ec_config.num.h                          = 0;
+    eeprom_ec_config.num.s                          = 0;
+    eeprom_ec_config.num.v                          = 60;
+    eeprom_ec_config.num.enabled                    = true;
+    eeprom_ec_config.caps.h                         = 0;
+    eeprom_ec_config.caps.s                         = 0;
+    eeprom_ec_config.caps.v                         = 60;
+    eeprom_ec_config.caps.enabled                   = true;
+    eeprom_ec_config.scroll.h                       = 0;
+    eeprom_ec_config.scroll.s                       = 0;
+    eeprom_ec_config.scroll.v                       = 60;
+    eeprom_ec_config.scroll.enabled                 = true;
+    eeprom_ec_config.actuation_mode                 = DEFAULT_ACTUATION_MODE;
+    eeprom_ec_config.mode_0_actuation_threshold     = DEFAULT_MODE_0_ACTUATION_LEVEL;
+    eeprom_ec_config.mode_0_release_threshold       = DEFAULT_MODE_0_RELEASE_LEVEL;
+    eeprom_ec_config.mode_1_initial_deadzone_offset = DEFAULT_MODE_1_INITIAL_DEADZONE_OFFSET;
+    eeprom_ec_config.mode_1_actuation_offset   = DEFAULT_MODE_1_ACTUATION_OFFSET;
+    eeprom_ec_config.mode_1_release_offset     = DEFAULT_MODE_1_RELEASE_OFFSET;
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+            eeprom_ec_config.bottoming_reading[row][col] = DEFAULT_BOTTOMING_READING;
+        }
+    }
+    // Write default value to EEPROM now
+    eeconfig_update_kb_datablock(&eeprom_ec_config);
+
+    eeconfig_init_user();
+}
+
+// On Keyboard startup
+void keyboard_post_init_kb(void) {
+    // Read custom menu variables from memory
+    eeconfig_read_kb_datablock(&eeprom_ec_config);
+
+    // Set runtime values to EEPROM values
+    ec_config.actuation_mode                 = eeprom_ec_config.actuation_mode;
+    ec_config.mode_0_actuation_threshold     = eeprom_ec_config.mode_0_actuation_threshold;
+    ec_config.mode_0_release_threshold       = eeprom_ec_config.mode_0_release_threshold;
+    ec_config.mode_1_initial_deadzone_offset = eeprom_ec_config.mode_1_initial_deadzone_offset;
+    ec_config.mode_1_actuation_offset   = eeprom_ec_config.mode_1_actuation_offset;
+    ec_config.mode_1_release_offset     = eeprom_ec_config.mode_1_release_offset;
+    ec_config.bottoming_calibration          = false;
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+            ec_config.bottoming_calibration_starter[row][col]           = true;
+            ec_config.bottoming_reading[row][col]                       = eeprom_ec_config.bottoming_reading[row][col];
+            ec_config.rescaled_mode_0_actuation_threshold[row][col]     = rescale(ec_config.mode_0_actuation_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+            ec_config.rescaled_mode_0_release_threshold[row][col]       = rescale(ec_config.mode_0_release_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+            ec_config.rescaled_mode_1_initial_deadzone_offset[row][col] = rescale(ec_config.mode_1_initial_deadzone_offset, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+        }
+    }
+
+    // Set the RGB LEDs range that will be used for the effects
+    rgblight_set_effect_range(3, 66);
+    // Call the indicator callback to set the indicator color
+    indicators_callback();
+
+    keyboard_post_init_user();
+}
+
+// This function gets called when caps, num, scroll change
+bool led_update_kb(led_t led_state) {
+    indicators_callback();
+    return true;
+}
+
+// This function is called when layers change
+layer_state_t layer_state_set_user(layer_state_t state) {
+    indicators_callback();
+    return state;
+}
+
+// INDICATOR CALLBACK ------------------------------------------------------------------------------
+/* LED index to physical position
+ *
+ * LED2 | LED1 |  LED0
+ * -----+------+--------
+ * Num  | Caps | Scroll |
+ */
+bool indicators_callback(void) {
+    if ((eeprom_ec_config.num.enabled) && (host_keyboard_led_state().num_lock))
+        sethsv(eeprom_ec_config.num.h, eeprom_ec_config.num.s, eeprom_ec_config.num.v, (rgb_led_t *)&led[NUM_INDICATOR_INDEX]);
+    else
+        sethsv(0, 0, 0, (rgb_led_t *)&led[NUM_INDICATOR_INDEX]);
+
+    if ((eeprom_ec_config.caps.enabled) && (host_keyboard_led_state().caps_lock))
+        sethsv(eeprom_ec_config.caps.h, eeprom_ec_config.caps.s, eeprom_ec_config.caps.v, (rgb_led_t *)&led[CAPS_INDICATOR_INDEX]);
+    else
+        sethsv(0, 0, 0, (rgb_led_t *)&led[CAPS_INDICATOR_INDEX]);
+
+    if ((eeprom_ec_config.scroll.enabled) && (host_keyboard_led_state().scroll_lock))
+        sethsv(eeprom_ec_config.scroll.h, eeprom_ec_config.scroll.s, eeprom_ec_config.scroll.v, (rgb_led_t *)&led[SCROLL_INDICATOR_INDEX]);
+    else
+        sethsv(0, 0, 0, (rgb_led_t *)&led[SCROLL_INDICATOR_INDEX]);
+
+    return true;
+}
diff --git a/keyboards/cipulot/ec_typek/halconf.h b/keyboards/cipulot/ec_typek/halconf.h
new file mode 100644
index 0000000000..24de095485
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/halconf.h
@@ -0,0 +1,23 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_ADC TRUE
+#define HAL_USE_PWM TRUE
+#define HAL_USE_PAL TRUE
+
+#include_next <halconf.h>
diff --git a/keyboards/cipulot/ec_typek/info.json b/keyboards/cipulot/ec_typek/info.json
new file mode 100644
index 0000000000..e4642ee555
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/info.json
@@ -0,0 +1,133 @@
+{
+    "manufacturer": "Cipulot",
+    "keyboard_name": "EC Type-K",
+    "maintainer": "Cipulot",
+    "bootloader": "stm32-dfu",
+    "build": {
+        "lto": true
+    },
+    "diode_direction": "COL2ROW",
+    "eeprom": {
+        "wear_leveling": {
+            "backing_size": 4096
+        }
+    },
+    "features": {
+        "bootmagic": false,
+        "console": true,
+        "extrakey": true,
+        "mousekey": true,
+        "nkro": true,
+        "rgblight": true
+    },
+    "processor": "STM32F411",
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
+    "rgblight": {
+        "animations": {
+            "alternating": true,
+            "breathing": true,
+            "christmas": true,
+            "knight": true,
+            "rainbow_mood": true,
+            "rainbow_swirl": true,
+            "rgb_test": true,
+            "snake": true,
+            "static_gradient": true,
+            "twinkle": true
+        },
+        "led_count": 69,
+        "led_map": [0, 1, 2, 3, 4, 5, 66, 67, 68, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65],
+        "max_brightness": 200
+    },
+    "usb": {
+        "device_version": "0.0.1",
+        "pid": "0x6BB4",
+        "shared_endpoint": {
+            "keyboard": true
+        },
+        "vid": "0x6369"
+    },
+    "ws2812": {
+        "driver": "pwm",
+        "pin": "B15"
+    },
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"matrix": [1, 0], "x": 0.75, "y": 0},
+                {"matrix": [0, 0], "x": 2.5, "y": 0},
+                {"matrix": [0, 1], "x": 3.5, "y": 0},
+                {"matrix": [0, 2], "x": 4.5, "y": 0},
+                {"matrix": [0, 3], "x": 5.5, "y": 0},
+                {"matrix": [0, 4], "x": 6.5, "y": 0},
+                {"matrix": [0, 5], "x": 7.5, "y": 0},
+                {"matrix": [0, 6], "x": 8.5, "y": 0},
+                {"matrix": [0, 7], "x": 10.5, "y": 0},
+                {"matrix": [0, 8], "x": 11.5, "y": 0},
+                {"matrix": [0, 9], "x": 12.5, "y": 0},
+                {"matrix": [0, 10], "x": 13.5, "y": 0},
+                {"matrix": [0, 11], "x": 14.5, "y": 0},
+                {"matrix": [0, 12], "x": 15.5, "y": 0},
+                {"matrix": [0, 13], "x": 16.5, "y": 0},
+                {"matrix": [0, 14], "x": 17.5, "y": 0},
+                {"matrix": [2, 0], "x": 0.5, "y": 1},
+                {"matrix": [1, 1], "x": 2.25, "y": 1, "w": 1.5},
+                {"matrix": [1, 2], "x": 3.75, "y": 1},
+                {"matrix": [1, 3], "x": 4.75, "y": 1},
+                {"matrix": [1, 4], "x": 5.75, "y": 1},
+                {"matrix": [1, 5], "x": 6.75, "y": 1},
+                {"matrix": [1, 6], "x": 7.75, "y": 1},
+                {"matrix": [1, 7], "x": 10.25, "y": 1},
+                {"matrix": [1, 8], "x": 11.25, "y": 1},
+                {"matrix": [1, 9], "x": 12.25, "y": 1},
+                {"matrix": [1, 10], "x": 13.25, "y": 1},
+                {"matrix": [1, 11], "x": 14.25, "y": 1},
+                {"matrix": [1, 12], "x": 15.25, "y": 1},
+                {"matrix": [1, 13], "x": 16.25, "y": 1},
+                {"matrix": [1, 14], "x": 17.25, "y": 1, "w": 1.5},
+                {"matrix": [3, 0], "x": 0.25, "y": 2},
+                {"matrix": [2, 1], "x": 2, "y": 2, "w": 1.75},
+                {"matrix": [2, 2], "x": 3.75, "y": 2},
+                {"matrix": [2, 3], "x": 4.75, "y": 2},
+                {"matrix": [2, 4], "x": 5.75, "y": 2},
+                {"matrix": [2, 5], "x": 6.75, "y": 2},
+                {"matrix": [2, 6], "x": 7.75, "y": 2},
+                {"matrix": [2, 7], "x": 10.75, "y": 2},
+                {"matrix": [2, 8], "x": 11.75, "y": 2},
+                {"matrix": [2, 9], "x": 12.75, "y": 2},
+                {"matrix": [2, 10], "x": 13.75, "y": 2},
+                {"matrix": [2, 11], "x": 14.75, "y": 2},
+                {"matrix": [2, 12], "x": 15.75, "y": 2},
+                {"matrix": [2, 14], "x": 16.75, "y": 2, "w": 2.25},
+                {"matrix": [4, 0], "x": 0, "y": 3},
+                {"matrix": [3, 1], "x": 1.75, "y": 3, "w": 2.25},
+                {"matrix": [3, 2], "x": 4, "y": 3},
+                {"matrix": [3, 3], "x": 5, "y": 3},
+                {"matrix": [3, 4], "x": 6, "y": 3},
+                {"matrix": [3, 5], "x": 7, "y": 3},
+                {"matrix": [3, 6], "x": 8, "y": 3},
+                {"matrix": [3, 7], "x": 10.5, "y": 3},
+                {"matrix": [3, 8], "x": 11.5, "y": 3},
+                {"matrix": [3, 9], "x": 12.5, "y": 3},
+                {"matrix": [3, 10], "x": 13.5, "y": 3},
+                {"matrix": [3, 11], "x": 14.5, "y": 3},
+                {"matrix": [3, 12], "x": 15.5, "y": 3},
+                {"matrix": [3, 13], "x": 16.5, "y": 3, "w": 1.25},
+                {"matrix": [3, 14], "x": 17.75, "y": 3},
+                {"matrix": [4, 1], "x": 1.75, "y": 4, "w": 1.5},
+                {"matrix": [4, 3], "x": 5, "y": 4, "w": 1.5},
+                {"matrix": [4, 5], "x": 6.5, "y": 4, "w": 2},
+                {"matrix": [4, 6], "x": 8.5, "y": 4},
+                {"matrix": [4, 7], "x": 10, "y": 4},
+                {"matrix": [4, 8], "x": 11, "y": 4, "w": 2},
+                {"matrix": [4, 10], "x": 13, "y": 4, "w": 1.5},
+                {"matrix": [4, 13], "x": 16.75, "y": 4, "w": 1.5}
+            ]
+        }
+    }
+}
diff --git a/keyboards/cipulot/ec_typek/keymaps/default/keymap.c b/keyboards/cipulot/ec_typek/keymaps/default/keymap.c
new file mode 100644
index 0000000000..e47e50680e
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/keymaps/default/keymap.c
@@ -0,0 +1,41 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    // clang-format off
+    [0] = LAYOUT(
+        KC_ESC,   KC_GRV,   KC_1,  KC_2,  KC_3,     KC_4,    KC_5,     KC_6,    KC_7,     KC_8,    KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSLS,   KC_DEL,
+        KC_PGUP,  KC_TAB,   KC_Q,  KC_W,  KC_E,     KC_R,    KC_T,              KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,   KC_BSPC,
+        KC_PGDN,  KC_CAPS,  KC_A,  KC_S,  KC_D,     KC_F,    KC_G,              KC_H,     KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_ENTER,
+        KC_LGUI,  KC_LSFT,  KC_Z,  KC_X,  KC_C,     KC_V,    KC_B,              KC_B,     KC_N,    KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   MO(1),
+        KC_LCTL,                          KC_LALT,  KC_SPC,  KC_LGUI,           KC_RGUI,  KC_SPC,  KC_RALT,                                           MO(1)
+    ),
+    [1] = LAYOUT(
+        _______,  _______,  KC_F1,    KC_F2,    KC_F3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   _______,  _______,
+        KC_HOME,  _______,  _______,  KC_UP,    _______,   _______,  _______,            _______,  _______,  KC_PSCR,  KC_SCRL,  KC_PAUSE,  _______,  _______,  _______,
+        KC_END,   _______,  KC_LEFT,  KC_DOWN,  KC_RIGHT,  _______,  _______,            _______,  _______,  _______,  _______,  _______,   _______,  _______,
+        _______,  _______,  _______,  _______,  _______,   _______,  _______,            _______,  _______,  _______,  _______,  _______,   _______,  _______,  _______,
+        _______,                                _______,   _______,  _______,            _______,  _______,  MO(2),                                             _______
+    ),
+    [2] = LAYOUT(
+        QK_BOOT,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+        NK_TOGG,  _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+        _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,  _______,  _______,  _______,  _______,  _______,
+        _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+        _______,                                _______,  _______,  _______,              _______,  _______,  _______,                                          _______)
+};
diff --git a/keyboards/cipulot/ec_typek/keymaps/via/keymap.c b/keyboards/cipulot/ec_typek/keymaps/via/keymap.c
new file mode 100644
index 0000000000..e47e50680e
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/keymaps/via/keymap.c
@@ -0,0 +1,41 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    // clang-format off
+    [0] = LAYOUT(
+        KC_ESC,   KC_GRV,   KC_1,  KC_2,  KC_3,     KC_4,    KC_5,     KC_6,    KC_7,     KC_8,    KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_BSLS,   KC_DEL,
+        KC_PGUP,  KC_TAB,   KC_Q,  KC_W,  KC_E,     KC_R,    KC_T,              KC_Y,     KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,   KC_BSPC,
+        KC_PGDN,  KC_CAPS,  KC_A,  KC_S,  KC_D,     KC_F,    KC_G,              KC_H,     KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT,  KC_ENTER,
+        KC_LGUI,  KC_LSFT,  KC_Z,  KC_X,  KC_C,     KC_V,    KC_B,              KC_B,     KC_N,    KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,   MO(1),
+        KC_LCTL,                          KC_LALT,  KC_SPC,  KC_LGUI,           KC_RGUI,  KC_SPC,  KC_RALT,                                           MO(1)
+    ),
+    [1] = LAYOUT(
+        _______,  _______,  KC_F1,    KC_F2,    KC_F3,     KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,    KC_F12,   _______,  _______,
+        KC_HOME,  _______,  _______,  KC_UP,    _______,   _______,  _______,            _______,  _______,  KC_PSCR,  KC_SCRL,  KC_PAUSE,  _______,  _______,  _______,
+        KC_END,   _______,  KC_LEFT,  KC_DOWN,  KC_RIGHT,  _______,  _______,            _______,  _______,  _______,  _______,  _______,   _______,  _______,
+        _______,  _______,  _______,  _______,  _______,   _______,  _______,            _______,  _______,  _______,  _______,  _______,   _______,  _______,  _______,
+        _______,                                _______,   _______,  _______,            _______,  _______,  MO(2),                                             _______
+    ),
+    [2] = LAYOUT(
+        QK_BOOT,  _______,  _______,  _______,  _______,  _______,  _______,  _______,    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+        NK_TOGG,  _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+        _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,  _______,  _______,  _______,  _______,  _______,
+        _______,  _______,  _______,  _______,  _______,  _______,  _______,              _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+        _______,                                _______,  _______,  _______,              _______,  _______,  _______,                                          _______)
+};
diff --git a/keyboards/cipulot/ec_typek/keymaps/via/rules.mk b/keyboards/cipulot/ec_typek/keymaps/via/rules.mk
new file mode 100644
index 0000000000..b870b6349c
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/keymaps/via/rules.mk
@@ -0,0 +1,3 @@
+VIA_ENABLE = yes
+
+SRC += via_ec_indicators.c
diff --git a/keyboards/cipulot/ec_typek/keymaps/via/via_ec_indicators.c b/keyboards/cipulot/ec_typek/keymaps/via/via_ec_indicators.c
new file mode 100644
index 0000000000..742dac0e6f
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/keymaps/via/via_ec_indicators.c
@@ -0,0 +1,502 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "keyboards/cipulot/common/eeprom_tools.h"
+#include "ec_switch_matrix.h"
+#include "action.h"
+#include "print.h"
+#include "via.h"
+
+#ifdef VIA_ENABLE
+
+void ec_rescale_values(uint8_t item);
+void ec_save_threshold_data(uint8_t option);
+void ec_save_bottoming_reading(void);
+void ec_show_calibration_data(void);
+void ec_clear_bottoming_calibration_data(void);
+
+// Declaring enums for VIA config menu
+enum via_enums {
+    // clang-format off
+    id_num_indicator_enabled    = 1,
+    id_num_indicator_brightness = 2,
+    id_num_indicator_color      = 3,
+    id_caps_indicator_enabled    = 4,
+    id_caps_indicator_brightness = 5,
+    id_caps_indicator_color      = 6,
+    id_scroll_indicator_enabled    = 7,
+    id_scroll_indicator_brightness = 8,
+    id_scroll_indicator_color      = 9,
+    id_actuation_mode = 10,
+    id_mode_0_actuation_threshold = 11,
+    id_mode_0_release_threshold = 12,
+    id_save_threshold_data = 13,
+    id_mode_1_initial_deadzone_offset = 14,
+    id_mode_1_actuation_offset = 15,
+    id_mode_1_release_offset = 16,
+    id_bottoming_calibration = 17,
+    id_noise_floor_calibration = 18,
+    id_show_calibration_data = 19,
+    id_clear_bottoming_calibration_data = 20
+    // clang-format on
+};
+
+// Handle the data received by the keyboard from the VIA menus
+void via_config_set_value(uint8_t *data) {
+    // data = [ value_id, value_data ]
+    uint8_t *value_id   = &(data[0]);
+    uint8_t *value_data = &(data[1]);
+
+    switch (*value_id) {
+        case id_num_indicator_enabled: {
+            if (value_data[0] == 1) {
+                eeprom_ec_config.num.enabled = true;
+                uprintf("#########################\n");
+                uprintf("# Num indicator enabled #\n");
+                uprintf("#########################\n");
+            } else {
+                eeprom_ec_config.num.enabled = false;
+                uprintf("##########################\n");
+                uprintf("# Num indicator disabled #\n");
+                uprintf("##########################\n");
+            }
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, num.enabled);
+            break;
+        }
+        case id_num_indicator_brightness: {
+            eeprom_ec_config.num.v = value_data[0];
+            uprintf("Num indicator brightness: %d\n", eeprom_ec_config.num.v);
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, num.v);
+            break;
+        }
+        case id_num_indicator_color: {
+            eeprom_ec_config.num.h = value_data[0];
+            eeprom_ec_config.num.s = value_data[1];
+            uprintf("Num indicator color: %d, %d\n", eeprom_ec_config.num.h, eeprom_ec_config.num.s);
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, num.h);
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, num.s);
+            break;
+        }
+        case id_caps_indicator_enabled: {
+            if (value_data[0] == 1) {
+                eeprom_ec_config.caps.enabled = true;
+                uprintf("##########################\n");
+                uprintf("# Caps indicator enabled #\n");
+                uprintf("##########################\n");
+            } else {
+                eeprom_ec_config.caps.enabled = false;
+                uprintf("###########################\n");
+                uprintf("# Caps indicator disabled #\n");
+                uprintf("###########################\n");
+            }
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, caps.enabled);
+            break;
+        }
+        case id_caps_indicator_brightness: {
+            eeprom_ec_config.caps.v = value_data[0];
+            uprintf("Caps indicator brightness: %d\n", eeprom_ec_config.caps.v);
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, caps.v);
+            break;
+        }
+        case id_caps_indicator_color: {
+            eeprom_ec_config.caps.h = value_data[0];
+            eeprom_ec_config.caps.s = value_data[1];
+            uprintf("Caps indicator color: %d, %d\n", eeprom_ec_config.caps.h, eeprom_ec_config.caps.s);
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, caps.h);
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, caps.s);
+            break;
+        }
+        case id_scroll_indicator_enabled: {
+            if (value_data[0] == 1) {
+                eeprom_ec_config.scroll.enabled = true;
+                uprintf("############################\n");
+                uprintf("# Scroll indicator enabled #\n");
+                uprintf("############################\n");
+            } else {
+                eeprom_ec_config.scroll.enabled = false;
+                uprintf("#############################\n");
+                uprintf("# Scroll indicator disabled #\n");
+                uprintf("#############################\n");
+            }
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, scroll.enabled);
+            break;
+        }
+        case id_scroll_indicator_brightness: {
+            eeprom_ec_config.scroll.v = value_data[0];
+            uprintf("Scroll indicator brightness: %d\n", eeprom_ec_config.scroll.v);
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, scroll.v);
+            break;
+        }
+        case id_scroll_indicator_color: {
+            eeprom_ec_config.scroll.h = value_data[0];
+            eeprom_ec_config.scroll.s = value_data[1];
+            uprintf("Scroll indicator color: %d, %d\n", eeprom_ec_config.scroll.h, eeprom_ec_config.scroll.s);
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, scroll.h);
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, scroll.s);
+            break;
+        }
+        case id_actuation_mode: {
+            eeprom_ec_config.actuation_mode = value_data[0];
+            ec_config.actuation_mode        = eeprom_ec_config.actuation_mode;
+            if (ec_config.actuation_mode == 0) {
+                uprintf("#########################\n");
+                uprintf("#  Actuation Mode: APC  #\n");
+                uprintf("#########################\n");
+            } else if (ec_config.actuation_mode == 1) {
+                uprintf("#################################\n");
+                uprintf("# Actuation Mode: Rapid Trigger #\n");
+                uprintf("#################################\n");
+            }
+            EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, actuation_mode);
+            break;
+        }
+        case id_mode_0_actuation_threshold: {
+            ec_config.mode_0_actuation_threshold = value_data[1] | (value_data[0] << 8);
+            uprintf("APC Mode Actuation Threshold: %d\n", ec_config.mode_0_actuation_threshold);
+            break;
+        }
+        case id_mode_0_release_threshold: {
+            eeprom_ec_config.mode_0_release_threshold = value_data[1] | (value_data[0] << 8);
+            ec_config.mode_0_release_threshold        = eeprom_ec_config.mode_0_release_threshold;
+            uprintf("APC Mode Release Threshold: %d\n", ec_config.mode_0_release_threshold);
+            break;
+        }
+        case id_mode_1_initial_deadzone_offset: {
+            ec_config.mode_1_initial_deadzone_offset = value_data[1] | (value_data[0] << 8);
+            uprintf("Rapid Trigger Mode Initial Deadzone Offset: %d\n", ec_config.mode_1_initial_deadzone_offset);
+            break;
+        }
+        case id_mode_1_actuation_offset: {
+            ec_config.mode_1_actuation_offset = value_data[0];
+            uprintf("Rapid Trigger Mode Actuation Sensitivity: %d\n", ec_config.mode_1_actuation_offset);
+            break;
+        }
+        case id_mode_1_release_offset: {
+            ec_config.mode_1_release_offset = value_data[0];
+            uprintf("Rapid Trigger Mode Release Sensitivity: %d\n", ec_config.mode_1_release_offset);
+            break;
+        }
+        case id_bottoming_calibration: {
+            if (value_data[0] == 1) {
+                ec_config.bottoming_calibration = true;
+                uprintf("##############################\n");
+                uprintf("# Bottoming calibration mode #\n");
+                uprintf("##############################\n");
+            } else {
+                ec_config.bottoming_calibration = false;
+                ec_save_bottoming_reading();
+                uprintf("## Bottoming calibration done ##\n");
+                ec_show_calibration_data();
+            }
+            break;
+        }
+        case id_save_threshold_data: {
+            ec_save_threshold_data(value_data[0]);
+            break;
+        }
+        case id_noise_floor_calibration: {
+            if (value_data[0] == 0) {
+                ec_noise_floor();
+                ec_rescale_values(0);
+                ec_rescale_values(1);
+                ec_rescale_values(2);
+                uprintf("#############################\n");
+                uprintf("# Noise floor data acquired #\n");
+                uprintf("#############################\n");
+                break;
+            }
+        }
+        case id_show_calibration_data: {
+            // Show calibration data once if the user toggle the switch
+            if (value_data[0] == 0) {
+                ec_show_calibration_data();
+                break;
+            }
+        }
+        case id_clear_bottoming_calibration_data: {
+            if (value_data[0] == 0) {
+                ec_clear_bottoming_calibration_data();
+            }
+        }
+        default: {
+            // Unhandled value.
+            break;
+        }
+    }
+
+    // Call the indicator callback to set the indicator color
+    indicators_callback();
+}
+
+// Handle the data sent by the keyboard to the VIA menus
+void via_config_get_value(uint8_t *data) {
+    // data = [ value_id, value_data ]
+    uint8_t *value_id   = &(data[0]);
+    uint8_t *value_data = &(data[1]);
+
+    switch (*value_id) {
+        case id_num_indicator_enabled: {
+            value_data[0] = eeprom_ec_config.num.enabled;
+            break;
+        }
+        case id_num_indicator_brightness: {
+            value_data[0] = eeprom_ec_config.num.v;
+            break;
+        }
+        case id_num_indicator_color: {
+            value_data[0] = eeprom_ec_config.num.h;
+            value_data[1] = eeprom_ec_config.num.s;
+            break;
+        }
+        case id_caps_indicator_enabled: {
+            value_data[0] = eeprom_ec_config.caps.enabled;
+            break;
+        }
+        case id_caps_indicator_brightness: {
+            value_data[0] = eeprom_ec_config.caps.v;
+            break;
+        }
+        case id_caps_indicator_color: {
+            value_data[0] = eeprom_ec_config.caps.h;
+            value_data[1] = eeprom_ec_config.caps.s;
+            break;
+        }
+        case id_scroll_indicator_enabled: {
+            value_data[0] = eeprom_ec_config.scroll.enabled;
+            break;
+        }
+        case id_scroll_indicator_brightness: {
+            value_data[0] = eeprom_ec_config.scroll.v;
+            break;
+        }
+        case id_scroll_indicator_color: {
+            value_data[0] = eeprom_ec_config.scroll.h;
+            value_data[1] = eeprom_ec_config.scroll.s;
+            break;
+        }
+        case id_actuation_mode: {
+            value_data[0] = eeprom_ec_config.actuation_mode;
+            break;
+        }
+        case id_mode_0_actuation_threshold: {
+            value_data[0] = eeprom_ec_config.mode_0_actuation_threshold >> 8;
+            value_data[1] = eeprom_ec_config.mode_0_actuation_threshold & 0xFF;
+            break;
+        }
+        case id_mode_0_release_threshold: {
+            value_data[0] = eeprom_ec_config.mode_0_release_threshold >> 8;
+            value_data[1] = eeprom_ec_config.mode_0_release_threshold & 0xFF;
+            break;
+        }
+        case id_mode_1_initial_deadzone_offset: {
+            value_data[0] = eeprom_ec_config.mode_1_initial_deadzone_offset >> 8;
+            value_data[1] = eeprom_ec_config.mode_1_initial_deadzone_offset & 0xFF;
+            break;
+        }
+        case id_mode_1_actuation_offset: {
+            value_data[0] = eeprom_ec_config.mode_1_actuation_offset;
+            break;
+        }
+        case id_mode_1_release_offset: {
+            value_data[0] = eeprom_ec_config.mode_1_release_offset;
+            break;
+        }
+        default: {
+            // Unhandled value.
+            break;
+        }
+    }
+}
+
+// Handle the commands sent and received by the keyboard with VIA
+void via_custom_value_command_kb(uint8_t *data, uint8_t length) {
+    // data = [ command_id, channel_id, value_id, value_data ]
+    uint8_t *command_id        = &(data[0]);
+    uint8_t *channel_id        = &(data[1]);
+    uint8_t *value_id_and_data = &(data[2]);
+
+    if (*channel_id == id_custom_channel) {
+        switch (*command_id) {
+            case id_custom_set_value: {
+                via_config_set_value(value_id_and_data);
+                break;
+            }
+            case id_custom_get_value: {
+                via_config_get_value(value_id_and_data);
+                break;
+            }
+            case id_custom_save: {
+                // Bypass the save function in favor of pinpointed saves
+                break;
+            }
+            default: {
+                // Unhandled message.
+                *command_id = id_unhandled;
+                break;
+            }
+        }
+        return;
+    }
+
+    *command_id = id_unhandled;
+}
+
+// Rescale the values received by VIA to fit the new range
+void ec_rescale_values(uint8_t item) {
+    switch (item) {
+        // Rescale the APC mode actuation thresholds
+        case 0:
+            for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+                for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+                    ec_config.rescaled_mode_0_actuation_threshold[row][col] = rescale(ec_config.mode_0_actuation_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+                }
+            }
+            break;
+        // Rescale the APC mode release thresholds
+        case 1:
+            for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+                for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+                    ec_config.rescaled_mode_0_release_threshold[row][col] = rescale(ec_config.mode_0_release_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+                }
+            }
+            break;
+        // Rescale the Rapid Trigger mode initial deadzone offsets
+        case 2:
+            for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+                for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+                    ec_config.rescaled_mode_1_initial_deadzone_offset[row][col] = rescale(ec_config.mode_1_initial_deadzone_offset, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+                }
+            }
+            break;
+
+        default:
+            // Unhandled item.
+            break;
+    }
+}
+
+void ec_save_threshold_data(uint8_t option) {
+    // Save APC mode thresholds and rescale them for runtime usage
+    if (option == 0) {
+        eeprom_ec_config.mode_0_actuation_threshold = ec_config.mode_0_actuation_threshold;
+        eeprom_ec_config.mode_0_release_threshold   = ec_config.mode_0_release_threshold;
+        ec_rescale_values(0);
+        ec_rescale_values(1);
+    }
+    // Save Rapid Trigger mode thresholds and rescale them for runtime usage
+    else if (option == 1) {
+        eeprom_ec_config.mode_1_initial_deadzone_offset = ec_config.mode_1_initial_deadzone_offset;
+        ec_rescale_values(2);
+    }
+    eeconfig_update_kb_datablock(&eeprom_ec_config);
+    uprintf("####################################\n");
+    uprintf("# New thresholds applied and saved #\n");
+    uprintf("####################################\n");
+}
+
+// Save the bottoming reading
+void ec_save_bottoming_reading(void) {
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+            // If the bottom reading doesn't go over the noise floor by 100, it is likely that:
+            // 1. The key is not actually in the matrix
+            // 2. The key is on an alternative layout, therefore not being pressed
+            // 3. The key in in the current layout but not being pressed
+            if (ec_config.bottoming_reading[row][col] < (ec_config.noise_floor[row][col] + 100)) {
+                eeprom_ec_config.bottoming_reading[row][col] = 1023;
+            } else {
+                eeprom_ec_config.bottoming_reading[row][col] = ec_config.bottoming_reading[row][col];
+            }
+        }
+    }
+    // Rescale the values to fit the new range for runtime usage
+    ec_rescale_values(0);
+    ec_rescale_values(1);
+    ec_rescale_values(2);
+    eeconfig_update_kb_datablock(&eeprom_ec_config);
+}
+
+// Show the calibration data
+void ec_show_calibration_data(void) {
+    uprintf("\n###############\n");
+    uprintf("# Noise Floor #\n");
+    uprintf("###############\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+            uprintf("%4d,", ec_config.noise_floor[row][col]);
+        }
+        uprintf("%4d\n", ec_config.noise_floor[row][MATRIX_COLS - 1]);
+    }
+
+    uprintf("\n######################\n");
+    uprintf("# Bottoming Readings #\n");
+    uprintf("######################\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+            uprintf("%4d,", eeprom_ec_config.bottoming_reading[row][col]);
+        }
+        uprintf("%4d\n", eeprom_ec_config.bottoming_reading[row][MATRIX_COLS - 1]);
+    }
+
+    uprintf("\n######################################\n");
+    uprintf("# Rescaled APC Mode Actuation Points #\n");
+    uprintf("######################################\n");
+    uprintf("Original APC Mode Actuation Point: %4d\n", ec_config.mode_0_actuation_threshold);
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+            uprintf("%4d,", ec_config.rescaled_mode_0_actuation_threshold[row][col]);
+        }
+        uprintf("%4d\n", ec_config.rescaled_mode_0_actuation_threshold[row][MATRIX_COLS - 1]);
+    }
+
+    uprintf("\n######################################\n");
+    uprintf("# Rescaled APC Mode Release Points   #\n");
+    uprintf("######################################\n");
+    uprintf("Original APC Mode Release Point: %4d\n", ec_config.mode_0_release_threshold);
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+            uprintf("%4d,", ec_config.rescaled_mode_0_release_threshold[row][col]);
+        }
+        uprintf("%4d\n", ec_config.rescaled_mode_0_release_threshold[row][MATRIX_COLS - 1]);
+    }
+
+    uprintf("\n#######################################################\n");
+    uprintf("# Rescaled Rapid Trigger Mode Initial Deadzone Offset #\n");
+    uprintf("#######################################################\n");
+    uprintf("Original Rapid Trigger Mode Initial Deadzone Offset: %4d\n", ec_config.mode_1_initial_deadzone_offset);
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+            uprintf("%4d,", ec_config.rescaled_mode_1_initial_deadzone_offset[row][col]);
+        }
+        uprintf("%4d\n", ec_config.rescaled_mode_1_initial_deadzone_offset[row][MATRIX_COLS - 1]);
+    }
+    print("\n");
+}
+
+// Clear the calibration data
+void ec_clear_bottoming_calibration_data(void) {
+    // Clear the EEPROM data
+    eeconfig_init_kb();
+
+    // Reset the runtime values to the EEPROM values
+    keyboard_post_init_kb();
+
+    uprintf("######################################\n");
+    uprintf("# Bottoming calibration data cleared #\n");
+    uprintf("######################################\n");
+}
+
+#endif // VIA_ENABLE
diff --git a/keyboards/cipulot/ec_typek/matrix.c b/keyboards/cipulot/ec_typek/matrix.c
new file mode 100644
index 0000000000..cfa2efe050
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/matrix.c
@@ -0,0 +1,42 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ec_switch_matrix.h"
+#include "matrix.h"
+
+extern matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values
+extern matrix_row_t matrix[MATRIX_ROWS];     // debounced values
+
+// Custom matrix init function
+void matrix_init_custom(void) {
+    // Initialize EC
+    ec_init();
+
+    // Get the noise floor at boot
+    ec_noise_floor();
+}
+
+// Custom matrix scan function
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    bool updated = ec_matrix_scan(current_matrix);
+
+    return updated;
+}
+
+// Bootmagic overriden to avoid conflicts with EC
+void bootmagic_scan(void) {
+    ;
+}
diff --git a/keyboards/cipulot/ec_typek/mcuconf.h b/keyboards/cipulot/ec_typek/mcuconf.h
new file mode 100644
index 0000000000..5f9ecca48d
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/mcuconf.h
@@ -0,0 +1,28 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_ADC_USE_ADC1
+#define STM32_ADC_USE_ADC1 TRUE
+
+#undef STM32_PWM_USE_ADVANCED
+#define STM32_PWM_USE_ADVANCED TRUE
+
+#undef STM32_PWM_USE_TIM1
+#define STM32_PWM_USE_TIM1 TRUE
diff --git a/keyboards/cipulot/ec_typek/readme.md b/keyboards/cipulot/ec_typek/readme.md
new file mode 100644
index 0000000000..44f6fd8944
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/readme.md
@@ -0,0 +1,26 @@
+# EC Type-K
+
+![EC Type-K](https://i.imgur.com/hFQ0qCfh.png)
+
+EC Type-K Keyboard by gok.
+
+* Keyboard Maintainer: [cipulot](https://github.com/cipulot)
+* Hardware Supported: EC Type-K
+* Hardware Availability: [gok](https://www.gok.design/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cipulot/ec_typek:default
+
+Flashing example for this keyboard:
+
+    make cipulot/ec_typek:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Physical Boot0 pins**: Short the Boot0 pins on the back of the PCB while plugging in the keyboard
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/cipulot/ec_typek/rules.mk b/keyboards/cipulot/ec_typek/rules.mk
new file mode 100644
index 0000000000..1ff311f102
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/rules.mk
@@ -0,0 +1,4 @@
+CUSTOM_MATRIX = lite
+ANALOG_DRIVER_REQUIRED = yes
+SRC += matrix.c ec_switch_matrix.c
+OPT = 2