summaryrefslogtreecommitdiff
path: root/converter/sun_usb
diff options
context:
space:
mode:
Diffstat (limited to 'converter/sun_usb')
-rw-r--r--converter/sun_usb/Makefile85
-rw-r--r--converter/sun_usb/README106
-rw-r--r--converter/sun_usb/command_extra.c61
-rw-r--r--converter/sun_usb/config.h95
-rw-r--r--converter/sun_usb/keymap.c192
-rw-r--r--converter/sun_usb/keymap_sun3.c173
-rw-r--r--converter/sun_usb/led.c35
-rw-r--r--converter/sun_usb/matrix.c186
8 files changed, 0 insertions, 933 deletions
diff --git a/converter/sun_usb/Makefile b/converter/sun_usb/Makefile
deleted file mode 100644
index f046bfdd36..0000000000
--- a/converter/sun_usb/Makefile
+++ /dev/null
@@ -1,85 +0,0 @@
-# Target file name (without extension).
-TARGET = sun_usb
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = keymap.c \
- matrix.c \
- led.c \
- command_extra.c \
- protocol/serial_soft.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-#MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-MCU = atmega32u2
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Build Options
-# *Comment out* to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-#NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-# Boot Section Size in bytes
-# Teensy halfKay 512
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/sun_usb/README b/converter/sun_usb/README
deleted file mode 100644
index 98340dd315..0000000000
--- a/converter/sun_usb/README
+++ /dev/null
@@ -1,106 +0,0 @@
-Sun to USB keyboard protocol converter
-======================================
-Target MCU is ATMega32u4 but other USB capable AVR will also work.
-
-This converter will work with Sun Type 2-5 Keyboards.
-
-
-Tested on:
-Sun Type 3 Keyboard: http://blog.daveastels.com.s3-website-us-west-2.amazonaws.com/2014/12/27/type-3-keyboard.html
-CTCSP SHORT TYPE KEYBOARD(Type 5): http://imgur.com/a/QIv6p
-
-
-Keymap of Type 3(keymap_sun3.c) were impoted from dastels's repository.
-https://github.com/dastels/tmk_keyboard/tree/master/converter/sun3_usb
-
-
-
-Connector
----------
- 8Pin mini DIN
- ___ ___
- / |_| \
- / 8 7 6 \
- | 5 4 3 |
- \_ 2 1 _/
- \_____/
- (receptacle)
-
- Wiring:
- Pin mini DIN MCU
- ----------------------------------
- 1 GND GND
- 2 GND GND
- 3 5V
- 4 RX/TX(Mouse)
- 5 RX PD3
- 6 TX PD2
- 7 GND GND
- 8 5V VCC
-
-
-Protocol
---------
-Signal: Asynchronous, Negative logic, 1200baud, No Flow control
-Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit
-
- AVR USART engine expects positive logic while Sun keyboard signal is negative.
- To use AVR UART engine you need external inverter in front of RX and TX pin.
- Otherwise you can software serial routine to communicate the keyboard.
-
-This converter uses software method, you doesn't need any inverter part.
-
-
-Commands From System To Keyboard
- 0x01 Reset
- Keyboard responds with following byte sequence:
- Success: 0xFF 0x04 0x7F
- Fail: 0x7E 0x01 0x7F
- 0x02 Bell On
- 0x03 Bell Off
- 0x0A Click On
- 0x0B Click Off
- 0x0E LED
- followed by LED status byte:
- bit: 3 2 1 0
- LED: CapsLk ScrLk Compose NumLk
- 0x0F Layout
- Keyboard responds with 'Layout Response' 0xFE 0xXX
-
-Commands From Keyboard To System
- 0x7F Idle
- means no keys pressed.
- 0xFE Layout Response
- 0xFF Reset Response(followed by 0x04)
-
-Reference
- http://kentie.net/article/sunkbd/page2.htm
- http://kentie.net/article/sunkbd/KBD.pdf
-
-
-Build Firmware
---------------
-Just use 'make'
- $ cd sun_usb
- $ make
-Then, load the binary to MCU with your favorite programmer.
-
-
-Sun commands
-------------
-You can send Sun protocol commands with TMK `Magic` key combo. By default `Magic` key is `LShift` + `RShift`, `LAlt` + `RAlt' or `LMeta` + `RMeta`.
-https://github.com/tmk/tmk_keyboard#magic-commands
-
-Following Sun specific commands are available. For example, to send 'Bell On' you can press `LShift` + `RShift` + `Up` keys simultaneously.
-
-```
------ Sun converter Help -----
-Up: Bell On
-Down: Bell Off
-Left: Click On
-Right: Click Off
-PgUp: LED all On
-PgDown: LED all On
-Insert: Layout
-Delete: Reset
-```
diff --git a/converter/sun_usb/command_extra.c b/converter/sun_usb/command_extra.c
deleted file mode 100644
index aba3fe6da3..0000000000
--- a/converter/sun_usb/command_extra.c
+++ /dev/null
@@ -1,61 +0,0 @@
-#include "stdbool.h"
-#include "stdint.h"
-#include "keycode.h"
-#include "serial.h"
-#include "print.h"
-#include "command.h"
-
-bool command_extra(uint8_t code)
-{
- switch (code) {
- case KC_H:
- case KC_SLASH: /* ? */
- print("\n\n----- Sun converter Help -----\n");
- print("Up: Bell On\n");
- print("Down: Bell Off\n");
- print("Left: Click On\n");
- print("Right: Click Off\n");
- print("PgUp: LED all On\n");
- print("PgDown: LED all On\n");
- print("Insert: Layout\n");
- print("Delete: Reset\n");
- return false;
- case KC_DEL:
- print("Reset\n");
- serial_send(0x01);
- break;
- case KC_UP:
- print("Bell On\n");
- serial_send(0x02);
- break;
- case KC_DOWN:
- print("Bell Off\n");
- serial_send(0x03);
- break;
- case KC_LEFT:
- print("Click On\n");
- serial_send(0x0A);
- break;
- case KC_RIGHT:
- print("Click Off\n");
- serial_send(0x0B);
- break;
- case KC_PGUP:
- print("LED all on\n");
- serial_send(0x0E);
- serial_send(0xFF);
- break;
- case KC_PGDOWN:
- print("LED all off\n");
- serial_send(0x0E);
- serial_send(0x00);
- break;
- case KC_INSERT:
- print("layout\n");
- serial_send(0x0F);
- break;
- default:
- return false;
- }
- return true;
-}
diff --git a/converter/sun_usb/config.h b/converter/sun_usb/config.h
deleted file mode 100644
index 66036da931..0000000000
--- a/converter/sun_usb/config.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x3333
-#define DEVICE_VER 0x0100
-#define MANUFACTURER t.m.k.
-#define PRODUCT Sun keyboard converter
-#define DESCRIPTION converts Sun keyboard protocol into USB
-
-/* matrix size */
-#define MATRIX_ROWS 16
-#define MATRIX_COLS 8
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
- keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* legacy keymap support */
-#define USE_LEGACY_KEYMAP
-
-
-/* Serial(USART) configuration
- * asynchronous, negative logic, 1200baud, no flow control
- * 1-start bit, 8-data bit, non parity, 1-stop bit
- */
-#define SERIAL_SOFT_BAUD 1200
-#define SERIAL_SOFT_PARITY_NONE
-#define SERIAL_SOFT_BIT_ORDER_LSB
-#define SERIAL_SOFT_LOGIC_NEGATIVE
-/* RXD Port */
-#define SERIAL_SOFT_RXD_ENABLE
-#define SERIAL_SOFT_RXD_DDR DDRD
-#define SERIAL_SOFT_RXD_PORT PORTD
-#define SERIAL_SOFT_RXD_PIN PIND
-#define SERIAL_SOFT_RXD_BIT 2
-#define SERIAL_SOFT_RXD_VECT INT2_vect
-/* RXD Interupt */
-#ifdef SERIAL_SOFT_LOGIC_NEGATIVE
-/* enable interrupt: INT2(rising edge) */
-#define INTR_TRIG_EDGE ((1<<ISC21)|(1<<ISC20))
-#else
-/* enable interrupt: INT2(falling edge) */
-#define INTR_TRIG_EDGE ((1<<ISC21)|(0<<ISC20))
-#endif
-#define SERIAL_SOFT_RXD_INIT() do { \
- /* pin configuration: input with pull-up */ \
- SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
- SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
- EICRA |= INTR_TRIG_EDGE; \
- EIMSK |= (1<<INT2); \
- sei(); \
-} while (0)
-#define SERIAL_SOFT_RXD_INT_ENTER()
-#define SERIAL_SOFT_RXD_INT_EXIT() do { \
- /* clear interrupt flag */ \
- EIFR = (1<<INTF2); \
-} while (0)
-#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
-/* TXD Port */
-#define SERIAL_SOFT_TXD_ENABLE
-#define SERIAL_SOFT_TXD_DDR DDRD
-#define SERIAL_SOFT_TXD_PORT PORTD
-#define SERIAL_SOFT_TXD_PIN PIND
-#define SERIAL_SOFT_TXD_BIT 3
-#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0)
-#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0)
-#define SERIAL_SOFT_TXD_INIT() do { \
- /* pin configuration: output */ \
- SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \
- /* idle */ \
- SERIAL_SOFT_TXD_ON(); \
-} while (0)
-
-#endif
diff --git a/converter/sun_usb/keymap.c b/converter/sun_usb/keymap.c
deleted file mode 100644
index 3d724a5201..0000000000
--- a/converter/sun_usb/keymap.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "util.h"
-#include "keymap.h"
-
-
-
-
-/* Sun type 5 keyboard
-,-------. ,---, ,---------------. ,---------------. ,---------------. ,-----------. ,---------------.
-| 76 | | | | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B| | 16| 17| 15| | 2D| 02| 04| 30|
-`-------' `---' `---------------' `---------------' `---------------' `-----------' `---------------'
-,-------. ,-----------------------------------------------------------. ,-----------. ,---------------.
-| 01| 03| | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A| | 2C| 34| 60| | 62| 2E| 2F| 47|
-|-------| |-----------------------------------------------------------| |------------ |---------------|
-| 19| 1A| | 35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 2B | | 42| 4A| 7B| | 44| 45| 46| |
-|-------| |-----------------------------------------------------------| `-----------' |-----------| 7D|
-| 31| 33| | 4C | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57| 59 | | 5B| 5C| 5D| |
-|-------| |-----------------------------------------------------------| ,---. |-----------|---|
-| 48| 49| | 63 | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D| 6E | | 14| | 70| 71| 72| |
-|-------| |-----------------------------------------------------------| .-----------. |-----------| 5A|
-| 5F| 61| | 77 | 13| 78 |*73 | 79 |*74 |*75| 7A | 43| 0D| | 18| 1B| 1C| | 5E | 32| |
-`-------' `-----------------------------------------------------------' `-----------' `---------------'
-*/
-#define KEYMAP( \
- K76, K05,K06,K08,K0A, K0C,K0E,K10,K11, K12,K07,K09,K0B, K16,K17,K15, K2D,K02,K04,K30, \
- K01,K03, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, K2C,K34,K60, K62,K2E,K2F,K47, \
- K19,K1A, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K2B, K42,K4A,K7B, K44,K45,K46,K7D, \
- K31,K33, K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, K5B,K5C,K5D, \
- K48,K49, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E, K14, K70,K71,K72,K5A, \
- K5F,K61, K77,K13, K78, K73, K79, K74, K75, K7A, K43, K0D, K18,K1B,K1C, K5E, K32 \
-) { \
- { KC_NO, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
- { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO, }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
- { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
- { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
- { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
- { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
- { KC_##K48, KC_##K49, KC_##K4A, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
- { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
- { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \
- { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
- { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_NO }, \
- { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
- { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_NO, KC_##K7D, KC_NO, KC_NO } \
-}
-
-/* CTCSP SHORT TYPE KEYBOARD */
-#define SHORT_TYPE( \
- K01, K05,K06,K08,K0A,K0C,K0E, K61,K49,K33, K30, K2C,K34,K60, \
- K10,K11,K12,K07,K09,K0B, K42,K4A,K7B, \
- K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, \
- K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K2B, \
- K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, \
- K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K0D,K14,K6E, \
- K77,K13, K78, K79, K7A,K43,K62,K18,K1B,K1C \
-) KEYMAP( \
- HELP, K05,K06,K08,K0A, K0C,K0E,K10,K11, K12,K07,K09,K0B, PSCR,SLCK,PAUS, MUTE,VOLD,VOLU,K30, \
- K01, AGAIN, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, K2C, K34, K60, K62, PSLS,PAST,PMNS, \
- MENU, UNDO, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K2B, K42, K4A, K7B, P7, P8, P9, PPLS, \
- SELECT, K33, K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, P4, P5, P6, \
- EXECUTE,K49, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E, K14, P1, P2, P3, PENT, \
- FIND, K61, K77,K13, K78, HENK, K79, MHEN, KANA, K7A,K43,K0D, K18, K1B, K1C, P0, PDOT \
-)
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
- 2, // Fn0
- 3, // Fn1
- 4, // Fn2
- 0, // Fn3
- 0, // Fn4
- 0, // Fn5
- 0, // Fn6
- 0 // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
- KC_NO, // Fn0
- KC_SCLN, // Fn1
- KC_SLSH, // Fn2
- KC_NO, // Fn3
- KC_NO, // Fn4
- KC_NO, // Fn5
- KC_NO, // Fn6
- KC_NO // Fn7
-};
-
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/*
- KEYMAP(
- HELP, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10,F11,F12, PSCR,SLCK,PAUS, MUTE,VOLD,VOLU,PWR,
- STOP, AGAIN, ESC,1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- MENU, UNDO, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC, DEL, END, PGDN, P7, P8, P9, PPLS,
- SELECT, COPY, LCTL, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6,
- EXECUTE,PASTE, LSFT, Z, X, C, V, B, N, M, COMM,DOT,SLSH, RSFT, UP, P1, P2, P3, PENT,
- FIND, CUT, CAPS, LALT, LGUI,HENK, SPC, MHEN,KANA,RGUI,APP, RALT, LEFT,DOWN,RGHT, P0, PDOT
- ),
-*/
- // 0: default
- SHORT_TYPE(
- STOP, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
- F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC,
- LCTL, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT,
- LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH, RALT,UP, RSFT,
- CAPS,LALT,LGUI, SPC, RGUI,APP, NLCK,LEFT,DOWN,RGHT
- ),
- // 1: with layer keys
- SHORT_TYPE(
- ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
- F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC,
- LCTL, A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT,
- LSFT, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,UP, FN0,
- CAPS,LALT,LGUI, SPC, RGUI,RALT,FN0, LEFT,DOWN,RGHT
- ),
- // 2: HHKB
- SHORT_TYPE(
- ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
- F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
- GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL,
- CAPS, NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, BSPC,
- LCTL, VOLD,VOLU,MUTE,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT,
- LSFT, Z, X, C, V, B, NO, NO, END, PGDN,DOWN, RSFT,PGUP,FN0,
- CAPS,LALT,LGUI, SPC, RGUI,RALT,FN0, HOME,PGDN,END
- ),
- // 3: Mousekey
- SHORT_TYPE(
- ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
- F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
- GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL,
- CAPS, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSPC,
- LCTL, NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT,
- LSFT, NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, RSFT,UP, NO,
- CAPS,LALT,LGUI, BTN1, RGUI,RALT,NO, LEFT,DOWN,RGHT
- ),
- // 4: Cursor
- SHORT_TYPE(
- ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
- F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
- GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL,
- CAPS, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC,
- LCTL, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT,
- LSFT, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,UP, NO,
- CAPS,LALT,LGUI, BTN1, RGUI,RALT,NO, LEFT,DOWN,RGHT
- ),
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
- return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
-}
-
-uint8_t keymap_fn_layer(uint8_t index)
-{
- return pgm_read_byte(&fn_layer[index]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t index)
-{
- return pgm_read_byte(&fn_keycode[index]);
-}
diff --git a/converter/sun_usb/keymap_sun3.c b/converter/sun_usb/keymap_sun3.c
deleted file mode 100644
index 273cd9442f..0000000000
--- a/converter/sun_usb/keymap_sun3.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "util.h"
-#include "keymap.h"
-
-
-/* Sun type 3 keyboard
-,-------. ,-----------------------------------------------------------. ,-----------.
-| 01| 03| | 05| 06| 08| 0A| 0C| 0E| 10| 11| 12| 2B| | 15| 16| 17|
-|-------| |-----------------------------------------------------------| |-----------|
-| 19| 1A| | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A| | 2D| 2E| 2F|
-|-------| |-----------------------------------------------------------| |-----------|
-| 31| 33| | 35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 42 | | 44| 45| 46|
-|-------| |-----------------------------------------------------------| |-----------|
-| 48| 49| | 4C | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57| 59 | | 5B| 5C| 5D|
-|-------| |-----------------------------------------------------------| |-----------|
-| 5F| 61| | 63 | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D| 6E| 6F| | 70| 71| 72|
-`-------' |-----------------------------------------------------------| `-----------'
- | 77 | 78 | 79 | 7A | 13 |
- `-----------------------------------------------------------'
-*/
-
-
-#define KEYMAP( \
- K01,K03, K05,K06, K08, K0A, K0C, K0E, K10,K11,K12,K2B, K15,K16,K17, \
- K19,K1A, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, K2D,K2E,K2F, \
- K31,K33, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K42, K44,K45,K46, \
- K48,K49, K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, K5B,K5C,K5D, \
- K5F,K61, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E,K6F, K70,K71,K72, \
- K77,K78, K79, K7A,K13 \
-) { \
- { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_NO, KC_##K05, KC_##K06, KC_NO }, \
- { KC_##K08, KC_NO, KC_##K0A, KC_NO, KC_##K0C, KC_NO, KC_##K0E, KC_NO }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_NO, KC_##K15, KC_##K16, KC_##K17 }, \
- { KC_NO, KC_##K19, KC_##K1A, KC_NO, KC_NO, KC_##K1D, KC_##K1E, KC_##K1F }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
- { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D, KC_##K2E, KC_##K2F }, \
- { KC_NO, KC_##K31, KC_NO, KC_##K33, KC_NO, KC_##K35, KC_##K36, KC_##K37 }, \
- { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
- { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \
- { KC_##K48, KC_##K49, KC_NO, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
- { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
- { KC_##K58, KC_##K59, KC_NO, KC_##K5B, KC_##K5C, KC_##K5D, KC_NO, KC_##K5F }, \
- { KC_NO, KC_##K61, KC_NO, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
- { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \
- { KC_##K70, KC_##K71, KC_##K72, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K77 }, \
- { KC_##K78, KC_##K79, KC_##K7A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \
-}
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
- 2, // Fn0
- 3, // Fn1
- 4, // Fn2
- 0, // Fn3
- 0, // Fn4
- 0, // Fn5
- 0, // Fn6
- 0 // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
- KC_NO, // Fn0
- KC_SCLN, // Fn1
- KC_SLSH, // Fn2
- KC_NO, // Fn3
- KC_NO, // Fn4
- KC_NO, // Fn5
- KC_NO, // Fn6
- KC_NO // Fn7
-};
-
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- KEYMAP(
- F10, F11, F1, F2, F3, F4, F5, F6, F7, F8, F9, BSPC, VOLD, MUTE, VOLU,
- F12, F13, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0,MINS, EQL, BSLS, GRV, MPRV, MPLY, MNXT,
- F14, F15, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, DEL, HOME, UP, PGUP,
- F16, F17, LCTL, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, LEFT, INSERT, RIGHT,
- F18, F19, LSFT, Z, X, C, V, B, N, M, COMM,DOT,SLSH, RSFT,RCTL, END, DOWN, PGDOWN,
- LGUI, LALT, SPC, RALT,RGUI
- ),
- /*
- // 0: default
- SHORT_TYPE(
- STOP, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
- F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC,
- LCTL, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT,
- LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH, RALT,UP, RSFT,
- CAPS,LALT,LGUI, SPC, RGUI,APP, NLCK,LEFT,DOWN,RGHT
- ),
- // 1: with layer keys
- SHORT_TYPE(
- ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
- F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC,
- LCTL, A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT,
- LSFT, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,UP, FN0,
- CAPS,LALT,LGUI, SPC, RGUI,RALT,FN0, LEFT,DOWN,RGHT
- ),
- // 2: HHKB
- SHORT_TYPE(
- ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
- F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
- GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL,
- CAPS, NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, BSPC,
- LCTL, VOLD,VOLU,MUTE,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT,
- LSFT, Z, X, C, V, B, NO, NO, END, PGDN,DOWN, RSFT,PGUP,FN0,
- CAPS,LALT,LGUI, SPC, RGUI,RALT,FN0, HOME,PGDN,END
- ),
- // 3: Mousekey
- SHORT_TYPE(
- ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
- F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
- GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL,
- CAPS, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSPC,
- LCTL, NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT,
- LSFT, NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, RSFT,UP, NO,
- CAPS,LALT,LGUI, BTN1, RGUI,RALT,NO, LEFT,DOWN,RGHT
- ),
- // 4: Cursor
- SHORT_TYPE(
- ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP,
- F7,F8,F9,F10,F11,F12, DEL, END, PGDN,
- GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL,
- CAPS, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC,
- LCTL, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT,
- LSFT, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,UP, NO,
- CAPS,LALT,LGUI, BTN1, RGUI,RALT,NO, LEFT,DOWN,RGHT
- ),
- */
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
- return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
-}
-
-uint8_t keymap_fn_layer(uint8_t index)
-{
- return pgm_read_byte(&fn_layer[index]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t index)
-{
- return pgm_read_byte(&fn_keycode[index]);
-}
diff --git a/converter/sun_usb/led.c b/converter/sun_usb/led.c
deleted file mode 100644
index 809398faa5..0000000000
--- a/converter/sun_usb/led.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "serial.h"
-#include "led.h"
-#include "debug.h"
-
-
-void led_set(uint8_t usb_led)
-{
- uint8_t sun_led = 0;
- if (usb_led & (1<<USB_LED_NUM_LOCK)) sun_led |= (1<<0);
- if (usb_led & (1<<USB_LED_COMPOSE)) sun_led |= (1<<1);
- if (usb_led & (1<<USB_LED_SCROLL_LOCK)) sun_led |= (1<<2);
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) sun_led |= (1<<3);
- xprintf("LED: %02X\n", usb_led);
-
- serial_send(0x0E);
- serial_send(sun_led);
-}
diff --git a/converter/sun_usb/matrix.c b/converter/sun_usb/matrix.c
deleted file mode 100644
index 3126bd33ca..0000000000
--- a/converter/sun_usb/matrix.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "util.h"
-#include "matrix.h"
-#include "debug.h"
-#include "protocol/serial.h"
-
-
-/*
- * Matrix Array usage:
- *
- * ROW: 16(4bits)
- * COL: 8(3bits)
- *
- * 8bit wide
- * +---------+
- * 0|00 ... 07|
- * 1|08 ... 0F|
- * :| ... |
- * :| ... |
- * E|70 ... 77|
- * F|78 ... 7F|
- * +---------+
- */
-static uint8_t matrix[MATRIX_ROWS];
-#define ROW(code) ((code>>3)&0xF)
-#define COL(code) (code&0x07)
-
-static bool is_modified = false;
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- DDRD |= (1<<6);
- PORTD |= (1<<6);
- //debug_enable = true;
-
- serial_init();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
-
- // wait for keyboard coming up
- // otherwise LED status update fails
- print("Reseting ");
- while (1) {
- print(".");
- while (serial_recv());
- serial_send(0x01);
- _delay_ms(500);
- if (serial_recv() == 0xFF) {
- _delay_ms(500);
- if (serial_recv() == 0x04)
- break;
- }
- }
- print(" Done\n");
- return;
-}
-
-uint8_t matrix_scan(void)
-{
- is_modified = false;
-
- uint8_t code;
- code = serial_recv();
- if (!code) return 0;
-
- debug_hex(code); debug(" ");
-
- switch (code) {
- case 0xFF: // reset success: FF 04
- print("reset: ");
- _delay_ms(500);
- code = serial_recv();
- xprintf("%02X\n", code);
- if (code == 0x04) {
- // LED status
- led_set(host_keyboard_leds());
- }
- return 0;
- case 0xFE: // layout: FE <layout>
- print("layout: ");
- _delay_ms(500);
- xprintf("%02X\n", serial_recv());
- return 0;
- case 0x7E: // reset fail: 7E 01
- print("reset fail: ");
- _delay_ms(500);
- xprintf("%02X\n", serial_recv());
- return 0;
- case 0x7F:
- // all keys up
- for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
- return 0;
- }
-
- if (code&0x80) {
- // break code
- if (matrix_is_on(ROW(code), COL(code))) {
- matrix[ROW(code)] &= ~(1<<COL(code));
- is_modified = true;
- }
- } else {
- // make code
- if (!matrix_is_on(ROW(code), COL(code))) {
- matrix[ROW(code)] |= (1<<COL(code));
- is_modified = true;
- }
- }
- return code;
-}
-
-bool matrix_is_modified(void)
-{
- return is_modified;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
- return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & (1<<col));
-}
-
-inline
-uint8_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 01234567\n");
- for (uint8_t row = 0; row < matrix_rows(); row++) {
- phex(row); print(": ");
- pbin_reverse(matrix_get_row(row));
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop(matrix[i]);
- }
- return count;
-}