Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware

8 files changed, 0 insertions, 933 deletions

diff --git a/converter/sun_usb/Makefile b/converter/sun_usb/Makefile
deleted file mode 100644
index f046bfdd36..0000000000
--- a/converter/sun_usb/Makefile
+++ /dev/null
@@ -1,85 +0,0 @@
-# Target file name (without extension).
-TARGET = sun_usb
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC =	keymap.c \
-	matrix.c \
-	led.c \
-	command_extra.c \
-	protocol/serial_soft.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-#MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
-MCU = atmega32u2
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Build Options
-#   *Comment out* to disable the options.
-#
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#NKRO_ENABLE = yes	# USB Nkey Rollover
-
-
-# Boot Section Size in bytes
-#   Teensy halfKay   512
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/sun_usb/README b/converter/sun_usb/README
deleted file mode 100644
index 98340dd315..0000000000
--- a/converter/sun_usb/README
+++ /dev/null
@@ -1,106 +0,0 @@
-Sun to USB keyboard protocol converter
-======================================
-Target MCU is ATMega32u4 but other USB capable AVR will also work.
-
-This converter will work with Sun Type 2-5 Keyboards.
-
-
-Tested on:
-Sun Type 3 Keyboard: http://blog.daveastels.com.s3-website-us-west-2.amazonaws.com/2014/12/27/type-3-keyboard.html
-CTCSP SHORT TYPE KEYBOARD(Type 5): http://imgur.com/a/QIv6p
-
-
-Keymap of Type 3(keymap_sun3.c) were impoted from dastels's repository.
-https://github.com/dastels/tmk_keyboard/tree/master/converter/sun3_usb
-
-
-
-Connector
----------
-  8Pin mini DIN
-     ___ ___
-    /  |_|  \
-   / 8  7  6 \
-  | 5    4  3 |
-   \_ 2   1 _/
-     \_____/  
-   (receptacle)
-
-    Wiring:
-    Pin mini DIN        MCU
-    ----------------------------------
-    1   GND             GND
-    2   GND             GND
-    3   5V
-    4   RX/TX(Mouse)
-    5   RX              PD3
-    6   TX              PD2
-    7   GND             GND
-    8   5V              VCC
-
-
-Protocol
---------
-Signal: Asynchronous, Negative logic, 1200baud, No Flow control
-Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit
-
-    AVR USART engine expects positive logic while Sun keyboard signal is negative.
-    To use AVR UART engine you need external inverter in front of RX and TX pin.
-    Otherwise you can software serial routine to communicate the keyboard.
-
-This converter uses software method, you doesn't need any inverter part.
-
-
-Commands From System To Keyboard
-    0x01 Reset
-            Keyboard responds with following byte sequence:
-            Success: 0xFF 0x04 0x7F
-            Fail:    0x7E 0x01 0x7F
-    0x02 Bell On
-    0x03 Bell Off
-    0x0A Click On
-    0x0B Click Off
-    0x0E LED
-            followed by LED status byte:
-            bit: 3       2       1       0
-            LED: CapsLk  ScrLk   Compose NumLk
-    0x0F Layout
-            Keyboard responds with 'Layout Response' 0xFE 0xXX
-
-Commands From Keyboard To System
-    0x7F Idle
-            means no keys pressed.
-    0xFE Layout Response
-    0xFF Reset Response(followed by 0x04)
-     
-Reference
-    http://kentie.net/article/sunkbd/page2.htm
-    http://kentie.net/article/sunkbd/KBD.pdf
-
-
-Build Firmware
---------------
-Just use 'make'
-    $ cd sun_usb
-    $ make
-Then, load the binary to MCU with your favorite programmer.
-
-
-Sun commands
-------------
-You can send Sun protocol commands with TMK `Magic` key combo. By default `Magic` key is `LShift` + `RShift`, `LAlt` + `RAlt' or `LMeta` + `RMeta`.
-https://github.com/tmk/tmk_keyboard#magic-commands
-
-Following Sun specific commands are available. For example, to send 'Bell On' you can press `LShift` + `RShift` + `Up` keys simultaneously.
-
-```
------ Sun converter Help -----
-Up:     Bell On
-Down:   Bell Off
-Left:   Click On
-Right:  Click Off
-PgUp:   LED all On
-PgDown: LED all On
-Insert: Layout
-Delete: Reset
-```
diff --git a/converter/sun_usb/command_extra.c b/converter/sun_usb/command_extra.c
deleted file mode 100644
index aba3fe6da3..0000000000
--- a/converter/sun_usb/command_extra.c
+++ /dev/null
@@ -1,61 +0,0 @@
-#include "stdbool.h"
-#include "stdint.h"
-#include "keycode.h"
-#include "serial.h"
-#include "print.h"
-#include "command.h"
-
-bool command_extra(uint8_t code)
-{
-    switch (code) {
-        case KC_H:
-        case KC_SLASH: /* ? */
-            print("\n\n----- Sun converter Help -----\n");
-            print("Up:	Bell On\n");
-            print("Down:	Bell Off\n");
-            print("Left:	Click On\n");
-            print("Right:	Click Off\n");
-            print("PgUp:	LED all On\n");
-            print("PgDown:	LED all On\n");
-            print("Insert:	Layout\n");
-            print("Delete:	Reset\n");
-            return false;
-        case KC_DEL:
-            print("Reset\n");
-            serial_send(0x01);
-            break;
-        case KC_UP:
-            print("Bell On\n");
-            serial_send(0x02);
-            break;
-        case KC_DOWN:
-            print("Bell Off\n");
-            serial_send(0x03);
-            break;
-        case KC_LEFT:
-            print("Click On\n");
-            serial_send(0x0A);
-            break;
-        case KC_RIGHT:
-            print("Click Off\n");
-            serial_send(0x0B);
-            break;
-        case KC_PGUP:
-            print("LED all on\n");
-            serial_send(0x0E);
-            serial_send(0xFF);
-            break;
-        case KC_PGDOWN:
-            print("LED all off\n");
-            serial_send(0x0E);
-            serial_send(0x00);
-            break;
-        case KC_INSERT:
-            print("layout\n");
-            serial_send(0x0F);
-            break;
-        default:
-            return false;
-    }
-    return true;
-}
diff --git a/converter/sun_usb/config.h b/converter/sun_usb/config.h
deleted file mode 100644
index 66036da931..0000000000
--- a/converter/sun_usb/config.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x3333
-#define DEVICE_VER      0x0100
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         Sun keyboard converter
-#define DESCRIPTION     converts Sun keyboard protocol into USB
-
-/* matrix size */
-#define MATRIX_ROWS 16
-#define MATRIX_COLS 8
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* legacy keymap support */
-#define USE_LEGACY_KEYMAP
-
-
-/* Serial(USART) configuration
- *     asynchronous, negative logic, 1200baud, no flow control
- *     1-start bit, 8-data bit, non parity, 1-stop bit
- */
-#define SERIAL_SOFT_BAUD            1200
-#define SERIAL_SOFT_PARITY_NONE
-#define SERIAL_SOFT_BIT_ORDER_LSB
-#define SERIAL_SOFT_LOGIC_NEGATIVE
-/* RXD Port */
-#define SERIAL_SOFT_RXD_ENABLE
-#define SERIAL_SOFT_RXD_DDR         DDRD
-#define SERIAL_SOFT_RXD_PORT        PORTD
-#define SERIAL_SOFT_RXD_PIN         PIND
-#define SERIAL_SOFT_RXD_BIT         2
-#define SERIAL_SOFT_RXD_VECT        INT2_vect
-/* RXD Interupt */
-#ifdef SERIAL_SOFT_LOGIC_NEGATIVE
-/* enable interrupt: INT2(rising edge) */
-#define INTR_TRIG_EDGE   ((1<<ISC21)|(1<<ISC20))
-#else
-/* enable interrupt: INT2(falling edge) */
-#define INTR_TRIG_EDGE   ((1<<ISC21)|(0<<ISC20))
-#endif
-#define SERIAL_SOFT_RXD_INIT()      do { \
-    /* pin configuration: input with pull-up */ \
-    SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
-    SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
-    EICRA |= INTR_TRIG_EDGE; \
-    EIMSK |= (1<<INT2); \
-    sei(); \
-} while (0)
-#define SERIAL_SOFT_RXD_INT_ENTER()
-#define SERIAL_SOFT_RXD_INT_EXIT()  do { \
-    /* clear interrupt  flag */ \
-    EIFR = (1<<INTF2); \
-} while (0)
-#define SERIAL_SOFT_RXD_READ()      (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
-/* TXD Port */
-#define SERIAL_SOFT_TXD_ENABLE
-#define SERIAL_SOFT_TXD_DDR         DDRD
-#define SERIAL_SOFT_TXD_PORT        PORTD
-#define SERIAL_SOFT_TXD_PIN         PIND
-#define SERIAL_SOFT_TXD_BIT         3
-#define SERIAL_SOFT_TXD_HI()        do { SERIAL_SOFT_TXD_PORT |=  (1<<SERIAL_SOFT_TXD_BIT); } while (0)
-#define SERIAL_SOFT_TXD_LO()        do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0)
-#define SERIAL_SOFT_TXD_INIT()      do { \
-    /* pin configuration: output */ \
-    SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \
-    /* idle */ \
-    SERIAL_SOFT_TXD_ON(); \
-} while (0)
-
-#endif
diff --git a/converter/sun_usb/keymap.c b/converter/sun_usb/keymap.c
deleted file mode 100644
index 3d724a5201..0000000000
--- a/converter/sun_usb/keymap.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "util.h"
-#include "keymap.h"
-
-
-
-
-/* Sun type 5 keyboard
-,-------.  ,---,  ,---------------. ,---------------. ,---------------.   ,-----------. ,---------------.
-|   76  |  |   |  | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B|   | 16| 17| 15| | 2D| 02| 04| 30|
-`-------'  `---'  `---------------' `---------------' `---------------'   `-----------' `---------------'
-,-------.  ,-----------------------------------------------------------.  ,-----------. ,---------------.
-| 01| 03|  | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A|  | 2C| 34| 60| | 62| 2E| 2F| 47|
-|-------|  |-----------------------------------------------------------|  |------------ |---------------|
-| 19| 1A|  |  35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 2B  |  | 42| 4A| 7B| | 44| 45| 46|   |
-|-------|  |-----------------------------------------------------------|  `-----------' |-----------| 7D|
-| 31| 33|  |  4C  | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57|   59   |                | 5B| 5C| 5D|   |
-|-------|  |-----------------------------------------------------------|      ,---.     |-----------|---|
-| 48| 49|  |   63   | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D|    6E    |      | 14|     | 70| 71| 72|   |
-|-------|  |-----------------------------------------------------------|  .-----------. |-----------| 5A|
-| 5F| 61|  | 77 | 13| 78 |*73 |       79         |*74 |*75| 7A | 43| 0D|  | 18| 1B| 1C| |   5E  | 32|   |
-`-------'  `-----------------------------------------------------------'  `-----------' `---------------'
-*/
-#define KEYMAP( \
-      K76,        K05,K06,K08,K0A,    K0C,K0E,K10,K11,    K12,K07,K09,K0B,  K16,K17,K15,  K2D,K02,K04,K30, \
-    K01,K03,  K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A,  K2C,K34,K60,  K62,K2E,K2F,K47, \
-    K19,K1A,  K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K2B,  K42,K4A,K7B,  K44,K45,K46,K7D, \
-    K31,K33,  K4C,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,                K5B,K5C,K5D,     \
-    K48,K49,  K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,         K6E,      K14,      K70,K71,K72,K5A, \
-    K5F,K61,  K77,K13, K78, K73,        K79,      K74, K75, K7A, K43, K0D,  K18,K1B,K1C,  K5E,    K32      \
-) { \
-    { KC_NO,    KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
-    { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO,   }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
-    { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
-    { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
-    { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
-    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
-    { KC_##K48, KC_##K49, KC_##K4A, KC_NO,    KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
-    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
-    { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \
-    { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
-    { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_NO    }, \
-    { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
-    { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_NO,    KC_##K7D, KC_NO,    KC_NO    }  \
-}
-
-/* CTCSP SHORT TYPE KEYBOARD */
-#define SHORT_TYPE( \
-    K01, K05,K06,K08,K0A,K0C,K0E, K61,K49,K33, K30, K2C,K34,K60, \
-         K10,K11,K12,K07,K09,K0B,                   K42,K4A,K7B, \
-    K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, \
-    K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K2B, \
-    K4C,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59, \
-    K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K0D,K14,K6E, \
-    K77,K13, K78,             K79,      K7A,K43,K62,K18,K1B,K1C  \
-) KEYMAP( \
-         HELP,           K05,K06,K08,K0A,    K0C,K0E,K10,K11,    K12,K07,K09,K0B,  PSCR,SLCK,PAUS,  MUTE,VOLD,VOLU,K30,  \
-    K01,    AGAIN,   K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A,  K2C, K34, K60,   K62, PSLS,PAST,PMNS, \
-    MENU,   UNDO,    K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K2B,  K42, K4A, K7B,   P7,  P8, P9,  PPLS,  \
-    SELECT, K33,     K4C,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,                   P4,  P5, P6,         \
-    EXECUTE,K49,     K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,         K6E,       K14,        P1,  P2, P3,  PENT,  \
-    FIND,   K61,     K77,K13, K78, HENK,       K79,      MHEN, KANA, K7A,K43,K0D,  K18, K1B, K1C,   P0,      PDOT        \
-)
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
-    2,              // Fn0
-    3,              // Fn1
-    4,              // Fn2
-    0,              // Fn3
-    0,              // Fn4
-    0,              // Fn5
-    0,              // Fn6
-    0               // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
-    KC_NO,          // Fn0
-    KC_SCLN,        // Fn1
-    KC_SLSH,        // Fn2
-    KC_NO,          // Fn3
-    KC_NO,          // Fn4
-    KC_NO,          // Fn5
-    KC_NO,          // Fn6
-    KC_NO           // Fn7
-};
-
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/*
-    KEYMAP(
-         HELP,       F1, F2, F3, F4,         F5, F6, F7, F8,         F9, F10,F11,F12,   PSCR,SLCK,PAUS,  MUTE,VOLD,VOLU,PWR,
-    STOP,   AGAIN,   ESC,1,  2,  3,  4,  5,  6,  7,  8,  9,  0,   MINS,EQL, BSLS,GRV,   INS, HOME,PGUP,  NLCK,PSLS,PAST,PMNS,
-    MENU,   UNDO,    TAB, Q,  W,  E,  R,  T,  Y,  U,  I,  O,  P,   LBRC,RBRC,    BSPC,  DEL, END, PGDN,  P7,  P8, P9,  PPLS,
-    SELECT, COPY,    LCTL, A,  S,  D,  F,  G,  H,  J,  K,  L,  SCLN,QUOT,        ENT,                    P4,  P5, P6,
-    EXECUTE,PASTE,   LSFT,  Z,  X,  C,  V,  B,  N,  M,  COMM,DOT,SLSH,           RSFT,       UP,         P1,  P2, P3,  PENT,
-    FIND,   CUT,     CAPS, LALT, LGUI,HENK,  SPC,            MHEN,KANA,RGUI,APP, RALT,  LEFT,DOWN,RGHT,  P0,      PDOT
-    ),
-*/
-    // 0: default
-    SHORT_TYPE(
-        STOP, F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
-              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
-        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,GRV,
-        TAB,  Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,    BSPC,
-        LCTL,  A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,        ENT,
-        LSFT,   Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,  RALT,UP,  RSFT,
-        CAPS,LALT,LGUI,            SPC,              RGUI,APP, NLCK,LEFT,DOWN,RGHT
-    ),
-    // 1: with layer keys
-    SHORT_TYPE(
-        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
-              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
-        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,GRV,
-        TAB,  Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,    BSPC,
-        LCTL,  A,   S,   D,   F,   G,   H,   J,   K,   L,   FN1, QUOT,        ENT,
-        LSFT,   Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2,   RSFT,UP,  FN0,
-        CAPS,LALT,LGUI,            SPC,              RGUI,RALT,FN0, LEFT,DOWN,RGHT
-    ),
-    // 2: HHKB
-    SHORT_TYPE(
-        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
-              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
-        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,
-        CAPS, NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,      BSPC,
-        LCTL,  VOLD,VOLU,MUTE,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,        ENT,
-        LSFT,   Z,   X,   C,   V,   B,   NO,  NO,  END, PGDN,DOWN,  RSFT,PGUP,FN0,
-        CAPS,LALT,LGUI,            SPC,              RGUI,RALT,FN0, HOME,PGDN,END
-    ),
-    // 3: Mousekey
-    SHORT_TYPE(
-        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
-              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
-        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,
-        CAPS, NO,  NO,  NO,  NO,  NO,  WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,      BSPC,
-        LCTL,  NO,  ACL0,ACL1,ACL2,NO,  MS_L,MS_D,MS_U,MS_R,FN1, NO,          ENT,
-        LSFT,   NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,NO,  NO,  NO,    RSFT,UP,  NO,
-        CAPS,LALT,LGUI,            BTN1,             RGUI,RALT,NO,  LEFT,DOWN,RGHT
-    ),
-    // 4: Cursor
-    SHORT_TYPE(
-        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
-              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
-        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,
-        CAPS, NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, NO,  NO,  NO,      BSPC,
-        LCTL,  NO,  NO,  NO,  NO,  NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,          ENT,
-        LSFT,   NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2,   RSFT,UP,  NO,
-        CAPS,LALT,LGUI,            BTN1,             RGUI,RALT,NO,  LEFT,DOWN,RGHT
-    ),
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
-    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
-}
-
-uint8_t keymap_fn_layer(uint8_t index)
-{
-    return pgm_read_byte(&fn_layer[index]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t index)
-{
-    return pgm_read_byte(&fn_keycode[index]);
-}
diff --git a/converter/sun_usb/keymap_sun3.c b/converter/sun_usb/keymap_sun3.c
deleted file mode 100644
index 273cd9442f..0000000000
--- a/converter/sun_usb/keymap_sun3.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "util.h"
-#include "keymap.h"
-
-
-/* Sun type 3 keyboard 
-,-------.  ,-----------------------------------------------------------.  ,-----------.
-| 01| 03|  | 05| 06|     08|     0A|     0C|     0E|     10| 11| 12| 2B|  | 15| 16| 17|
-|-------|  |-----------------------------------------------------------|  |-----------|
-| 19| 1A|  | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A|  | 2D| 2E| 2F|
-|-------|  |-----------------------------------------------------------|  |-----------|
-| 31| 33|  |  35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 42  |  | 44| 45| 46|
-|-------|  |-----------------------------------------------------------|  |-----------|
-| 48| 49|  |  4C  | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57|   59   |  | 5B| 5C| 5D|
-|-------|  |-----------------------------------------------------------|  |-----------|
-| 5F| 61|  |   63   | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D|    6E| 6F|  | 70| 71| 72|
-`-------'  |-----------------------------------------------------------|  `-----------'
-           | 77 | 78  |               79                  | 7A  |   13 |  
-           `-----------------------------------------------------------'  
-*/
-
-
-#define KEYMAP( \
-    K01,K03,  K05,K06,    K08,    K0A,    K0C,    K0E,    K10,K11,K12,K2B,  K15,K16,K17, \
-    K19,K1A,  K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A,  K2D,K2E,K2F, \
-    K31,K33,  K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K42,  K44,K45,K46, \
-    K48,K49,  K4C,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,  K5B,K5C,K5D, \
-    K5F,K61,  K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,     K6E,K6F,  K70,K71,K72, \
-              K77,K78,                    K79,                    K7A,K13                \
-) { \
-    { KC_NO,    KC_##K01, KC_NO,    KC_##K03, KC_NO,    KC_##K05, KC_##K06, KC_NO    }, \
-    { KC_##K08, KC_NO,    KC_##K0A, KC_NO,    KC_##K0C, KC_NO,    KC_##K0E, KC_NO    }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_NO,    KC_##K15, KC_##K16, KC_##K17 }, \
-    { KC_NO,    KC_##K19, KC_##K1A, KC_NO,    KC_NO,    KC_##K1D, KC_##K1E, KC_##K1F }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
-    { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO,    KC_##K2D, KC_##K2E, KC_##K2F }, \
-    { KC_NO,    KC_##K31, KC_NO,    KC_##K33, KC_NO,    KC_##K35, KC_##K36, KC_##K37 }, \
-    { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
-    { KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_##K44, KC_##K45, KC_##K46, KC_NO    }, \
-    { KC_##K48, KC_##K49, KC_NO,    KC_NO,    KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
-    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
-    { KC_##K58, KC_##K59, KC_NO,    KC_##K5B, KC_##K5C, KC_##K5D, KC_NO,    KC_##K5F }, \
-    { KC_NO,    KC_##K61, KC_NO,    KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
-    { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \
-    { KC_##K70, KC_##K71, KC_##K72, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K77 }, \
-    { KC_##K78, KC_##K79, KC_##K7A, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }  \
-}
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
-    2,              // Fn0
-    3,              // Fn1
-    4,              // Fn2
-    0,              // Fn3
-    0,              // Fn4
-    0,              // Fn5
-    0,              // Fn6
-    0               // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
-    KC_NO,          // Fn0
-    KC_SCLN,        // Fn1
-    KC_SLSH,        // Fn2
-    KC_NO,          // Fn3
-    KC_NO,          // Fn4
-    KC_NO,          // Fn5
-    KC_NO,          // Fn6
-    KC_NO           // Fn7
-};
-
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    KEYMAP(
-    F10, F11,   F1, F2,     F3,     F4,     F5,     F6,      F7,  F8, F9,  BSPC,   VOLD, MUTE,   VOLU,
-    F12, F13,   ESC, 1,  2,  3,  4,  5,  6,  7,  8,  9,  0,MINS, EQL, BSLS, GRV,   MPRV, MPLY,   MNXT,
-    F14, F15,   TAB, Q,  W,  E,  R,  T,  Y,  U,  I,  O,  P,   LBRC,RBRC,    DEL,   HOME, UP,     PGUP,
-    F16, F17,   LCTL, A,  S,  D,  F,  G,  H,  J,  K,  L,  SCLN,QUOT,        ENT,   LEFT, INSERT, RIGHT, 
-    F18, F19,   LSFT,  Z,  X,  C,  V,  B,  N,  M,  COMM,DOT,SLSH,     RSFT,RCTL,   END,  DOWN,   PGDOWN,
-                LGUI, LALT,                 SPC,                      RALT,RGUI
-    ),
-    /*
-    // 0: default
-    SHORT_TYPE(
-        STOP, F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
-              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
-        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,GRV,
-        TAB,  Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,    BSPC,
-        LCTL,  A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,        ENT,
-        LSFT,   Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,  RALT,UP,  RSFT,
-        CAPS,LALT,LGUI,            SPC,              RGUI,APP, NLCK,LEFT,DOWN,RGHT
-    ),
-    // 1: with layer keys
-    SHORT_TYPE(
-        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
-              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
-        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,GRV,
-        TAB,  Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,    BSPC,
-        LCTL,  A,   S,   D,   F,   G,   H,   J,   K,   L,   FN1, QUOT,        ENT,
-        LSFT,   Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2,   RSFT,UP,  FN0,
-        CAPS,LALT,LGUI,            SPC,              RGUI,RALT,FN0, LEFT,DOWN,RGHT
-    ),
-    // 2: HHKB
-    SHORT_TYPE(
-        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
-              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
-        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,
-        CAPS, NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,      BSPC,
-        LCTL,  VOLD,VOLU,MUTE,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,        ENT,
-        LSFT,   Z,   X,   C,   V,   B,   NO,  NO,  END, PGDN,DOWN,  RSFT,PGUP,FN0,
-        CAPS,LALT,LGUI,            SPC,              RGUI,RALT,FN0, HOME,PGDN,END
-    ),
-    // 3: Mousekey
-    SHORT_TYPE(
-        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
-              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
-        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,
-        CAPS, NO,  NO,  NO,  NO,  NO,  WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,      BSPC,
-        LCTL,  NO,  ACL0,ACL1,ACL2,NO,  MS_L,MS_D,MS_U,MS_R,FN1, NO,          ENT,
-        LSFT,   NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,NO,  NO,  NO,    RSFT,UP,  NO,
-        CAPS,LALT,LGUI,            BTN1,             RGUI,RALT,NO,  LEFT,DOWN,RGHT
-    ),
-    // 4: Cursor
-    SHORT_TYPE(
-        ESC,  F1,F2,F3,F4, F5, F6,   CUT,PASTE,COPY,PWR,    INS, HOME,PGUP,
-              F7,F8,F9,F10,F11,F12,                         DEL, END, PGDN,
-        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,
-        CAPS, NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, NO,  NO,  NO,      BSPC,
-        LCTL,  NO,  NO,  NO,  NO,  NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,          ENT,
-        LSFT,   NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2,   RSFT,UP,  NO,
-        CAPS,LALT,LGUI,            BTN1,             RGUI,RALT,NO,  LEFT,DOWN,RGHT
-    ),
-    */
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
-    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
-}
-
-uint8_t keymap_fn_layer(uint8_t index)
-{
-    return pgm_read_byte(&fn_layer[index]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t index)
-{
-    return pgm_read_byte(&fn_keycode[index]);
-}
diff --git a/converter/sun_usb/led.c b/converter/sun_usb/led.c
deleted file mode 100644
index 809398faa5..0000000000
--- a/converter/sun_usb/led.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "stdint.h"
-#include "serial.h"
-#include "led.h"
-#include "debug.h"
-
-
-void led_set(uint8_t usb_led)
-{
-    uint8_t sun_led = 0;
-    if (usb_led & (1<<USB_LED_NUM_LOCK))    sun_led |= (1<<0);
-    if (usb_led & (1<<USB_LED_COMPOSE))     sun_led |= (1<<1);
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) sun_led |= (1<<2);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK))   sun_led |= (1<<3);
-    xprintf("LED: %02X\n", usb_led);
-
-    serial_send(0x0E);
-    serial_send(sun_led);
-}
diff --git a/converter/sun_usb/matrix.c b/converter/sun_usb/matrix.c
deleted file mode 100644
index 3126bd33ca..0000000000
--- a/converter/sun_usb/matrix.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "util.h"
-#include "matrix.h"
-#include "debug.h"
-#include "protocol/serial.h"
-
-
-/*
- * Matrix Array usage:
- *
- * ROW: 16(4bits)
- * COL:  8(3bits)
- *
- *    8bit wide
- *   +---------+
- *  0|00 ... 07|
- *  1|08 ... 0F|
- *  :|   ...   |
- *  :|   ...   |
- *  E|70 ... 77|
- *  F|78 ... 7F|
- *   +---------+
- */
-static uint8_t matrix[MATRIX_ROWS];
-#define ROW(code)      ((code>>3)&0xF)
-#define COL(code)      (code&0x07)
-
-static bool is_modified = false;
-
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    DDRD |= (1<<6);
-    PORTD |= (1<<6);
-    //debug_enable = true;
-
-    serial_init();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
-
-    // wait for keyboard coming up
-    // otherwise LED status update fails
-    print("Reseting ");
-    while (1) {
-        print(".");
-        while (serial_recv());
-        serial_send(0x01);
-        _delay_ms(500);
-        if (serial_recv() == 0xFF) {
-            _delay_ms(500);
-            if (serial_recv() == 0x04)
-                break;
-        }
-    }
-    print(" Done\n");
-    return;
-}
-
-uint8_t matrix_scan(void)
-{
-    is_modified = false;
-
-    uint8_t code;
-    code = serial_recv();
-    if (!code) return 0;
-
-    debug_hex(code); debug(" ");
-
-    switch (code) {
-        case 0xFF:  // reset success: FF 04
-            print("reset: ");
-            _delay_ms(500);
-            code = serial_recv();
-            xprintf("%02X\n", code);
-            if (code == 0x04) {
-                // LED status
-                led_set(host_keyboard_leds());
-            }
-            return 0;
-        case 0xFE:  // layout: FE <layout>
-            print("layout: ");
-            _delay_ms(500);
-            xprintf("%02X\n", serial_recv());
-            return 0;
-        case 0x7E:  // reset fail: 7E 01
-            print("reset fail: ");
-            _delay_ms(500);
-            xprintf("%02X\n", serial_recv());
-            return 0;
-        case 0x7F:
-            // all keys up
-            for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
-            return 0;
-    }
-
-    if (code&0x80) {
-        // break code
-        if (matrix_is_on(ROW(code), COL(code))) {
-            matrix[ROW(code)] &= ~(1<<COL(code));
-            is_modified = true;
-        }
-    } else {
-        // make code
-        if (!matrix_is_on(ROW(code), COL(code))) {
-            matrix[ROW(code)] |=  (1<<COL(code));
-            is_modified = true;
-        }
-    }
-    return code;
-}
-
-bool matrix_is_modified(void)
-{
-    return is_modified;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
-    return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & (1<<col));
-}
-
-inline
-uint8_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 01234567\n");
-    for (uint8_t row = 0; row < matrix_rows(); row++) {
-        phex(row); print(": ");
-        pbin_reverse(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop(matrix[i]);
-    }
-    return count;
-}