path: root/drivers/issi/is31fl3733.c

/* Copyright 2017 Jason Williams
 * Copyright 2018 Jack Humbert
 * Copyright 2018 Yiancar
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#ifdef __AVR__
#include <avr/interrupt.h>
#include <avr/io.h>
#include <util/delay.h>
#else
#include "wait.h"
#endif

#include "is31fl3733.h"
#include <string.h>
#include "i2c_master.h"
#include "progmem.h"

// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 00 <-> GND
// 01 <-> SCL
// 10 <-> SDA
// 11 <-> VCC
// ADDR1 represents A1:A0 of the 7-bit address.
// ADDR2 represents A3:A2 of the 7-bit address.
// The result is: 0b101(ADDR2)(ADDR1)
#define ISSI_ADDR_DEFAULT 0x50

#define ISSI_COMMANDREGISTER 0xFD
#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
#define ISSI_INTERRUPTMASKREGISTER 0xF0
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1

#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
#define ISSI_PAGE_PWM 0x01        //PG1
#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
#define ISSI_PAGE_FUNCTION 0x03   //PG3

#define ISSI_REG_CONFIGURATION 0x00 //PG3
#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
#define ISSI_REG_RESET 0x11// PG3
#define ISSI_REG_SWPULLUP 0x0F //PG3
#define ISSI_REG_CSPULLUP 0x10 //PG3

#ifndef ISSI_TIMEOUT
  #define ISSI_TIMEOUT 100
#endif

#ifndef ISSI_PERSISTENCE
  #define ISSI_PERSISTENCE 0
#endif

// Transfer buffer for TWITransmitData()
uint8_t g_twi_transfer_buffer[20];

// These buffers match the IS31FL3733 PWM registers.
// The control buffers match the PG0 LED On/Off registers.
// Storing them like this is optimal for I2C transfers to the registers.
// We could optimize this and take out the unused registers from these
// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
// probably not worth the extra complexity.
uint8_t g_pwm_buffer[DRIVER_COUNT][192];
bool g_pwm_buffer_update_required = false;

uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
bool g_led_control_registers_update_required = false;

void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data )
{
    g_twi_transfer_buffer[0] = reg;
    g_twi_transfer_buffer[1] = data;

  #if ISSI_PERSISTENCE > 0
    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
        break;
    }
  #else
    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
  #endif
}

void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
{
    // assumes PG1 is already selected

    // transmit PWM registers in 12 transfers of 16 bytes
    // g_twi_transfer_buffer[] is 20 bytes

    // iterate over the pwm_buffer contents at 16 byte intervals
    for ( int i = 0; i < 192; i += 16 ) {
        g_twi_transfer_buffer[0] = i;
        // copy the data from i to i+15
        // device will auto-increment register for data after the first byte
        // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
        for ( int j = 0; j < 16; j++ ) {
            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
        }

    #if ISSI_PERSISTENCE > 0
      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
          break;
      }
    #else
      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
    #endif
    }
}

void IS31FL3733_init( uint8_t addr )
{
    // In order to avoid the LEDs being driven with garbage data
    // in the LED driver's PWM registers, shutdown is enabled last.
    // Set up the mode and other settings, clear the PWM registers,
    // then disable software shutdown.

    // Unlock the command register.
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );

    // Select PG0
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
    // Turn off all LEDs.
    for ( int i = 0x00; i <= 0x17; i++ )
    {
        IS31FL3733_write_register( addr, i, 0x00 );
    }

    // Unlock the command register.
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );

    // Select PG1
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
    // Set PWM on all LEDs to 0
    // No need to setup Breath registers to PWM as that is the default.
    for ( int i = 0x00; i <= 0xBF; i++ )
    {
        IS31FL3733_write_register( addr, i, 0x00 );
    }

    // Unlock the command register.
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );

    // Select PG3
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
    // Set global current to maximum.
    IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
    // Disable software shutdown.
    IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );

    // Wait 10ms to ensure the device has woken up.
    #ifdef __AVR__
    _delay_ms( 10 );
    #else
    wait_ms(10);
    #endif
}

void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
{
    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
        is31_led led = g_is31_leds[index];

        g_pwm_buffer[led.driver][led.r] = red;
        g_pwm_buffer[led.driver][led.g] = green;
        g_pwm_buffer[led.driver][led.b] = blue;
        g_pwm_buffer_update_required = true;
    }
}

void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
{
    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
    {
        IS31FL3733_set_color( i, red, green, blue );
    }
}

void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
{
    is31_led led = g_is31_leds[index];

  uint8_t control_register_r = led.r / 8;
  uint8_t control_register_g = led.g / 8;
  uint8_t control_register_b = led.b / 8;
  uint8_t bit_r = led.r % 8;
  uint8_t bit_g = led.g % 8;
  uint8_t bit_b = led.b % 8;

    if ( red ) {
        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
    } else {
        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
    }
    if ( green ) {
        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
    } else {
        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
    }
    if ( blue ) {
        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
    } else {
        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
    }

    g_led_control_registers_update_required = true;

}

void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
{
    if ( g_pwm_buffer_update_required )
    {
        // Firstly we need to unlock the command register and select PG1
        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );

        IS31FL3733_write_pwm_buffer( addr1, g_pwm_buffer[0] );
        //IS31FL3733_write_pwm_buffer( addr2, g_pwm_buffer[1] );
    }
    g_pwm_buffer_update_required = false;
}

void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
{
    if ( g_led_control_registers_update_required )
    {
        // Firstly we need to unlock the command register and select PG0
        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
        for ( int i=0; i<24; i++ )
        {
            IS31FL3733_write_register(addr1, i, g_led_control_registers[0][i] );
            //IS31FL3733_write_register(addr2, i, g_led_control_registers[1][i] );
        }
    }
}