1 files changed, 0 insertions, 67 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/SPPMulti/SPPMulti.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/SPPMulti/SPPMulti.ino
deleted file mode 100644
index df521d8e17..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/SPPMulti/SPPMulti.ino
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- Example sketch for the RFCOMM/SPP Bluetooth library - developed by Kristian Lauszus
- For more information visit my blog: http://blog.tkjelectronics.dk/ or
- send me an e-mail:  kristianl@tkjelectronics.com
- */
-
-#include <SPP.h>
-#include <usbhub.h>
-
-// Satisfy IDE, which only needs to see the include statment in the ino.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-USB Usb;
-//USBHub Hub1(&Usb); // Some dongles have a hub inside
-
-BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
-
-const uint8_t length = 2; // Set the number of instances here
-SPP *SerialBT[length]; // We will use this pointer to store the instances, you can easily make it larger if you like, but it will use a lot of RAM!
-
-bool firstMessage[length] = { true }; // Set all to true
-
-void setup() {
-  for (uint8_t i = 0; i < length; i++)
-    SerialBT[i] = new SPP(&Btd); // This will set the name to the default: "Arduino" and the pin to "0000" for all connections
-
-  Serial.begin(115200);
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-  if (Usb.Init() == -1) {
-    Serial.print(F("\r\nOSC did not start"));
-    while (1); // Halt
-  }
-  Serial.print(F("\r\nSPP Bluetooth Library Started"));
-}
-
-void loop() {
-  Usb.Task(); // The SPP data is actually not send until this is called, one could call SerialBT.send() directly as well
-
-  for (uint8_t i = 0; i < length; i++) {
-    if (SerialBT[i]->connected) {
-      if (firstMessage[i]) {
-        firstMessage[i] = false;
-        SerialBT[i]->println(F("Hello from Arduino")); // Send welcome message
-      }
-      if (SerialBT[i]->available())
-        Serial.write(SerialBT[i]->read());
-    }
-    else
-      firstMessage[i] = true;
-  }
-
-  // Set the connection you want to send to using the first character
-  // For instance "0Hello World" would send "Hello World" to connection 0
-  if (Serial.available()) {
-    delay(10); // Wait for the rest of the data to arrive
-    uint8_t id = Serial.read() - '0'; // Convert from ASCII
-    if (id < length && SerialBT[id]->connected) { // Make sure that the id is valid and make sure that a device is actually connected
-      while (Serial.available()) // Check if data is available
-        SerialBT[id]->write(Serial.read()); // Send the data
-    }
-  }
-}