diff options
Diffstat (limited to 'tmk_core/protocol/arm_atsam/md_rgb_matrix.c')
-rw-r--r-- | tmk_core/protocol/arm_atsam/md_rgb_matrix.c | 86 |
1 files changed, 44 insertions, 42 deletions
diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c index 0ea7e38395..609ae047e6 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c @@ -15,16 +15,17 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "arm_atsam_protocol.h" -#include "led.h" -#include "rgb_matrix.h" -#include <string.h> -#include <math.h> - -#ifdef USE_MASSDROP_CONFIGURATOR +#ifdef RGB_MATRIX_ENABLE +# include "arm_atsam_protocol.h" +# include "led.h" +# include "rgb_matrix.h" +# include <string.h> +# include <math.h> + +# ifdef USE_MASSDROP_CONFIGURATOR __attribute__((weak)) led_instruction_t led_instructions[] = {{.end = 1}}; static void md_rgb_matrix_config_override(int i); -#endif // USE_MASSDROP_CONFIGURATOR +# endif // USE_MASSDROP_CONFIGURATOR void SERCOM1_0_Handler(void) { if (SERCOM1->I2CM.INTFLAG.bit.ERROR) { @@ -58,17 +59,17 @@ RGB led_buffer[ISSI3733_LED_COUNT]; uint8_t gcr_desired; uint8_t gcr_actual; uint8_t gcr_actual_last; -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR uint8_t gcr_breathe; float breathe_mult; float pomod; -#endif +# endif -#define ACT_GCR_NONE 0 -#define ACT_GCR_INC 1 -#define ACT_GCR_DEC 2 +# define ACT_GCR_NONE 0 +# define ACT_GCR_INC 1 +# define ACT_GCR_DEC 2 -#define LED_GCR_STEP_AUTO 2 +# define LED_GCR_STEP_AUTO 2 static uint8_t gcr_min_counter; static uint8_t v_5v_cat_hit; @@ -78,11 +79,11 @@ void gcr_compute(void) { uint8_t action = ACT_GCR_NONE; uint8_t gcr_use = gcr_desired; -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR if (led_animation_breathing) { gcr_use = gcr_breathe; } -#endif +# endif // If the 5v takes a catastrophic hit, disable the LED drivers briefly, assert auto gcr mode, min gcr and let the auto take over if (v_5v < V5_CAT) { @@ -150,7 +151,7 @@ void gcr_compute(void) { gcr_actual -= LED_GCR_STEP_AUTO; gcr_min_counter = 0; -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR // If breathe mode is active, the top end can fluctuate if the host can not supply enough current // So set the breathe GCR to where it becomes stable if (led_animation_breathing == 1) { @@ -159,7 +160,7 @@ void gcr_compute(void) { // and the same would happen maybe one or two more times. Therefore I'm favoring // powering through one full breathe and letting gcr settle completely } -#endif +# endif } } } @@ -196,25 +197,25 @@ void md_rgb_matrix_prepare(void) { } } -void led_set_one(int i, uint8_t r, uint8_t g, uint8_t b) { +static void led_set_one(int i, uint8_t r, uint8_t g, uint8_t b) { if (i < ISSI3733_LED_COUNT) { -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR md_rgb_matrix_config_override(i); -#else +# else led_buffer[i].r = r; led_buffer[i].g = g; led_buffer[i].b = b; -#endif +# endif } } -void led_set_all(uint8_t r, uint8_t g, uint8_t b) { +static void led_set_all(uint8_t r, uint8_t g, uint8_t b) { for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) { led_set_one(i, r, g, b); } } -void init(void) { +static void init(void) { DBGC(DC_LED_MATRIX_INIT_BEGIN); issi3733_prepare_arrays(); @@ -227,16 +228,16 @@ void init(void) { DBGC(DC_LED_MATRIX_INIT_COMPLETE); } -void flush(void) { -#ifdef USE_MASSDROP_CONFIGURATOR +static void flush(void) { +# ifdef USE_MASSDROP_CONFIGURATOR if (!led_enabled) { return; } // Prevent calculations and I2C traffic if LED drivers are not enabled -#else +# else if (!sr_exp_data.bit.SDB_N) { return; } // Prevent calculations and I2C traffic if LED drivers are not enabled -#endif +# endif // Wait for previous transfer to complete while (i2c_led_q_running) { @@ -249,7 +250,7 @@ void flush(void) { *led_map[i].rgb.b = led_buffer[i].b; } -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR breathe_mult = 1; if (led_animation_breathing) { @@ -275,7 +276,7 @@ void flush(void) { pomod = (uint32_t)pomod % 10000; pomod /= 100.0f; -#endif // USE_MASSDROP_CONFIGURATOR +# endif // USE_MASSDROP_CONFIGURATOR uint8_t drvid; @@ -295,21 +296,21 @@ void md_rgb_matrix_indicators(void) { if (kbled && rgb_matrix_config.enable) { for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) { if ( -#if USB_LED_NUM_LOCK_SCANCODE != 255 +# if USB_LED_NUM_LOCK_SCANCODE != 255 (led_map[i].scan == USB_LED_NUM_LOCK_SCANCODE && (kbled & (1 << USB_LED_NUM_LOCK))) || -#endif // NUM LOCK -#if USB_LED_CAPS_LOCK_SCANCODE != 255 +# endif // NUM LOCK +# if USB_LED_CAPS_LOCK_SCANCODE != 255 (led_map[i].scan == USB_LED_CAPS_LOCK_SCANCODE && (kbled & (1 << USB_LED_CAPS_LOCK))) || -#endif // CAPS LOCK -#if USB_LED_SCROLL_LOCK_SCANCODE != 255 +# endif // CAPS LOCK +# if USB_LED_SCROLL_LOCK_SCANCODE != 255 (led_map[i].scan == USB_LED_SCROLL_LOCK_SCANCODE && (kbled & (1 << USB_LED_SCROLL_LOCK))) || -#endif // SCROLL LOCK -#if USB_LED_COMPOSE_SCANCODE != 255 +# endif // SCROLL LOCK +# if USB_LED_COMPOSE_SCANCODE != 255 (led_map[i].scan == USB_LED_COMPOSE_SCANCODE && (kbled & (1 << USB_LED_COMPOSE))) || -#endif // COMPOSE -#if USB_LED_KANA_SCANCODE != 255 +# endif // COMPOSE +# if USB_LED_KANA_SCANCODE != 255 (led_map[i].scan == USB_LED_KANA_SCANCODE && (kbled & (1 << USB_LED_KANA))) || -#endif // KANA +# endif // KANA (0)) { if (rgb_matrix_get_flags() & LED_FLAG_INDICATOR) { led_buffer[i].r = 255 - led_buffer[i].r; @@ -327,7 +328,7 @@ const rgb_matrix_driver_t rgb_matrix_driver = {.init = init, .flush = flush, .se = Legacy Lighting Support = ==============================================================================*/ -#ifdef USE_MASSDROP_CONFIGURATOR +# ifdef USE_MASSDROP_CONFIGURATOR // Ported from Massdrop QMK GitHub Repo // TODO?: wire these up to keymap.c @@ -469,4 +470,5 @@ static void md_rgb_matrix_config_override(int i) { led_buffer[i].b = (uint8_t)bo; } -#endif // USE_MASSDROP_CONFIGURATOR +# endif // USE_MASSDROP_CONFIGURATOR +#endif // RGB_MATRIX_ENABLE
\ No newline at end of file |