summaryrefslogtreecommitdiff
path: root/protocol/vusb/usbdrv/usbdrvasm12.inc
diff options
context:
space:
mode:
Diffstat (limited to 'protocol/vusb/usbdrv/usbdrvasm12.inc')
-rw-r--r--protocol/vusb/usbdrv/usbdrvasm12.inc393
1 files changed, 0 insertions, 393 deletions
diff --git a/protocol/vusb/usbdrv/usbdrvasm12.inc b/protocol/vusb/usbdrv/usbdrvasm12.inc
deleted file mode 100644
index c1167584cb..0000000000
--- a/protocol/vusb/usbdrv/usbdrvasm12.inc
+++ /dev/null
@@ -1,393 +0,0 @@
-/* Name: usbdrvasm12.inc
- * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
- * Author: Christian Starkjohann
- * Creation Date: 2004-12-29
- * Tabsize: 4
- * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
- * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
- * This Revision: $Id: usbdrvasm12.inc 740 2009-04-13 18:23:31Z cs $
- */
-
-/* Do not link this file! Link usbdrvasm.S instead, which includes the
- * appropriate implementation!
- */
-
-/*
-General Description:
-This file is the 12 MHz version of the asssembler part of the USB driver. It
-requires a 12 MHz crystal (not a ceramic resonator and not a calibrated RC
-oscillator).
-
-See usbdrv.h for a description of the entire driver.
-
-Since almost all of this code is timing critical, don't change unless you
-really know what you are doing! Many parts require not only a maximum number
-of CPU cycles, but even an exact number of cycles!
-
-
-Timing constraints according to spec (in bit times):
-timing subject min max CPUcycles
----------------------------------------------------------------------------
-EOP of OUT/SETUP to sync pattern of DATA0 (both rx) 2 16 16-128
-EOP of IN to sync pattern of DATA0 (rx, then tx) 2 7.5 16-60
-DATAx (rx) to ACK/NAK/STALL (tx) 2 7.5 16-60
-*/
-
-;Software-receiver engine. Strict timing! Don't change unless you can preserve timing!
-;interrupt response time: 4 cycles + insn running = 7 max if interrupts always enabled
-;max allowable interrupt latency: 34 cycles -> max 25 cycles interrupt disable
-;max stack usage: [ret(2), YL, SREG, YH, shift, x1, x2, x3, cnt, x4] = 11 bytes
-;Numbers in brackets are maximum cycles since SOF.
-USB_INTR_VECTOR:
-;order of registers pushed: YL, SREG [sofError], YH, shift, x1, x2, x3, cnt
- push YL ;2 [35] push only what is necessary to sync with edge ASAP
- in YL, SREG ;1 [37]
- push YL ;2 [39]
-;----------------------------------------------------------------------------
-; Synchronize with sync pattern:
-;----------------------------------------------------------------------------
-;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K]
-;sync up with J to K edge during sync pattern -- use fastest possible loops
-;The first part waits at most 1 bit long since we must be in sync pattern.
-;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to
-;waitForJ, ensure that this prerequisite is met.
-waitForJ:
- inc YL
- sbis USBIN, USBMINUS
- brne waitForJ ; just make sure we have ANY timeout
-waitForK:
-;The following code results in a sampling window of 1/4 bit which meets the spec.
- sbis USBIN, USBMINUS
- rjmp foundK
- sbis USBIN, USBMINUS
- rjmp foundK
- sbis USBIN, USBMINUS
- rjmp foundK
- sbis USBIN, USBMINUS
- rjmp foundK
- sbis USBIN, USBMINUS
- rjmp foundK
-#if USB_COUNT_SOF
- lds YL, usbSofCount
- inc YL
- sts usbSofCount, YL
-#endif /* USB_COUNT_SOF */
-#ifdef USB_SOF_HOOK
- USB_SOF_HOOK
-#endif
- rjmp sofError
-foundK:
-;{3, 5} after falling D- edge, average delay: 4 cycles [we want 4 for center sampling]
-;we have 1 bit time for setup purposes, then sample again. Numbers in brackets
-;are cycles from center of first sync (double K) bit after the instruction
- push YH ;2 [2]
- lds YL, usbInputBufOffset;2 [4]
- clr YH ;1 [5]
- subi YL, lo8(-(usbRxBuf));1 [6]
- sbci YH, hi8(-(usbRxBuf));1 [7]
-
- sbis USBIN, USBMINUS ;1 [8] we want two bits K [sample 1 cycle too early]
- rjmp haveTwoBitsK ;2 [10]
- pop YH ;2 [11] undo the push from before
- rjmp waitForK ;2 [13] this was not the end of sync, retry
-haveTwoBitsK:
-;----------------------------------------------------------------------------
-; push more registers and initialize values while we sample the first bits:
-;----------------------------------------------------------------------------
- push shift ;2 [16]
- push x1 ;2 [12]
- push x2 ;2 [14]
-
- in x1, USBIN ;1 [17] <-- sample bit 0
- ldi shift, 0xff ;1 [18]
- bst x1, USBMINUS ;1 [19]
- bld shift, 0 ;1 [20]
- push x3 ;2 [22]
- push cnt ;2 [24]
-
- in x2, USBIN ;1 [25] <-- sample bit 1
- ser x3 ;1 [26] [inserted init instruction]
- eor x1, x2 ;1 [27]
- bst x1, USBMINUS ;1 [28]
- bld shift, 1 ;1 [29]
- ldi cnt, USB_BUFSIZE;1 [30] [inserted init instruction]
- rjmp rxbit2 ;2 [32]
-
-;----------------------------------------------------------------------------
-; Receiver loop (numbers in brackets are cycles within byte after instr)
-;----------------------------------------------------------------------------
-
-unstuff0: ;1 (branch taken)
- andi x3, ~0x01 ;1 [15]
- mov x1, x2 ;1 [16] x2 contains last sampled (stuffed) bit
- in x2, USBIN ;1 [17] <-- sample bit 1 again
- ori shift, 0x01 ;1 [18]
- rjmp didUnstuff0 ;2 [20]
-
-unstuff1: ;1 (branch taken)
- mov x2, x1 ;1 [21] x1 contains last sampled (stuffed) bit
- andi x3, ~0x02 ;1 [22]
- ori shift, 0x02 ;1 [23]
- nop ;1 [24]
- in x1, USBIN ;1 [25] <-- sample bit 2 again
- rjmp didUnstuff1 ;2 [27]
-
-unstuff2: ;1 (branch taken)
- andi x3, ~0x04 ;1 [29]
- ori shift, 0x04 ;1 [30]
- mov x1, x2 ;1 [31] x2 contains last sampled (stuffed) bit
- nop ;1 [32]
- in x2, USBIN ;1 [33] <-- sample bit 3
- rjmp didUnstuff2 ;2 [35]
-
-unstuff3: ;1 (branch taken)
- in x2, USBIN ;1 [34] <-- sample stuffed bit 3 [one cycle too late]
- andi x3, ~0x08 ;1 [35]
- ori shift, 0x08 ;1 [36]
- rjmp didUnstuff3 ;2 [38]
-
-unstuff4: ;1 (branch taken)
- andi x3, ~0x10 ;1 [40]
- in x1, USBIN ;1 [41] <-- sample stuffed bit 4
- ori shift, 0x10 ;1 [42]
- rjmp didUnstuff4 ;2 [44]
-
-unstuff5: ;1 (branch taken)
- andi x3, ~0x20 ;1 [48]
- in x2, USBIN ;1 [49] <-- sample stuffed bit 5
- ori shift, 0x20 ;1 [50]
- rjmp didUnstuff5 ;2 [52]
-
-unstuff6: ;1 (branch taken)
- andi x3, ~0x40 ;1 [56]
- in x1, USBIN ;1 [57] <-- sample stuffed bit 6
- ori shift, 0x40 ;1 [58]
- rjmp didUnstuff6 ;2 [60]
-
-; extra jobs done during bit interval:
-; bit 0: store, clear [SE0 is unreliable here due to bit dribbling in hubs]
-; bit 1: se0 check
-; bit 2: overflow check
-; bit 3: recovery from delay [bit 0 tasks took too long]
-; bit 4: none
-; bit 5: none
-; bit 6: none
-; bit 7: jump, eor
-rxLoop:
- eor x3, shift ;1 [0] reconstruct: x3 is 0 at bit locations we changed, 1 at others
- in x1, USBIN ;1 [1] <-- sample bit 0
- st y+, x3 ;2 [3] store data
- ser x3 ;1 [4]
- nop ;1 [5]
- eor x2, x1 ;1 [6]
- bst x2, USBMINUS;1 [7]
- bld shift, 0 ;1 [8]
- in x2, USBIN ;1 [9] <-- sample bit 1 (or possibly bit 0 stuffed)
- andi x2, USBMASK ;1 [10]
- breq se0 ;1 [11] SE0 check for bit 1
- andi shift, 0xf9 ;1 [12]
-didUnstuff0:
- breq unstuff0 ;1 [13]
- eor x1, x2 ;1 [14]
- bst x1, USBMINUS;1 [15]
- bld shift, 1 ;1 [16]
-rxbit2:
- in x1, USBIN ;1 [17] <-- sample bit 2 (or possibly bit 1 stuffed)
- andi shift, 0xf3 ;1 [18]
- breq unstuff1 ;1 [19] do remaining work for bit 1
-didUnstuff1:
- subi cnt, 1 ;1 [20]
- brcs overflow ;1 [21] loop control
- eor x2, x1 ;1 [22]
- bst x2, USBMINUS;1 [23]
- bld shift, 2 ;1 [24]
- in x2, USBIN ;1 [25] <-- sample bit 3 (or possibly bit 2 stuffed)
- andi shift, 0xe7 ;1 [26]
- breq unstuff2 ;1 [27]
-didUnstuff2:
- eor x1, x2 ;1 [28]
- bst x1, USBMINUS;1 [29]
- bld shift, 3 ;1 [30]
-didUnstuff3:
- andi shift, 0xcf ;1 [31]
- breq unstuff3 ;1 [32]
- in x1, USBIN ;1 [33] <-- sample bit 4
- eor x2, x1 ;1 [34]
- bst x2, USBMINUS;1 [35]
- bld shift, 4 ;1 [36]
-didUnstuff4:
- andi shift, 0x9f ;1 [37]
- breq unstuff4 ;1 [38]
- nop2 ;2 [40]
- in x2, USBIN ;1 [41] <-- sample bit 5
- eor x1, x2 ;1 [42]
- bst x1, USBMINUS;1 [43]
- bld shift, 5 ;1 [44]
-didUnstuff5:
- andi shift, 0x3f ;1 [45]
- breq unstuff5 ;1 [46]
- nop2 ;2 [48]
- in x1, USBIN ;1 [49] <-- sample bit 6
- eor x2, x1 ;1 [50]
- bst x2, USBMINUS;1 [51]
- bld shift, 6 ;1 [52]
-didUnstuff6:
- cpi shift, 0x02 ;1 [53]
- brlo unstuff6 ;1 [54]
- nop2 ;2 [56]
- in x2, USBIN ;1 [57] <-- sample bit 7
- eor x1, x2 ;1 [58]
- bst x1, USBMINUS;1 [59]
- bld shift, 7 ;1 [60]
-didUnstuff7:
- cpi shift, 0x04 ;1 [61]
- brsh rxLoop ;2 [63] loop control
-unstuff7:
- andi x3, ~0x80 ;1 [63]
- ori shift, 0x80 ;1 [64]
- in x2, USBIN ;1 [65] <-- sample stuffed bit 7
- nop ;1 [66]
- rjmp didUnstuff7 ;2 [68]
-
-macro POP_STANDARD ; 12 cycles
- pop cnt
- pop x3
- pop x2
- pop x1
- pop shift
- pop YH
- endm
-macro POP_RETI ; 5 cycles
- pop YL
- out SREG, YL
- pop YL
- endm
-
-#include "asmcommon.inc"
-
-;----------------------------------------------------------------------------
-; Transmitting data
-;----------------------------------------------------------------------------
-
-txByteLoop:
-txBitloop:
-stuffN1Delay: ; [03]
- ror shift ;[-5] [11] [59]
- brcc doExorN1 ;[-4] [60]
- subi x4, 1 ;[-3]
- brne commonN1 ;[-2]
- lsl shift ;[-1] compensate ror after rjmp stuffDelay
- nop ;[00] stuffing consists of just waiting 8 cycles
- rjmp stuffN1Delay ;[01] after ror, C bit is reliably clear
-
-sendNakAndReti: ;0 [-19] 19 cycles until SOP
- ldi x3, USBPID_NAK ;1 [-18]
- rjmp usbSendX3 ;2 [-16]
-sendAckAndReti: ;0 [-19] 19 cycles until SOP
- ldi x3, USBPID_ACK ;1 [-18]
- rjmp usbSendX3 ;2 [-16]
-sendCntAndReti: ;0 [-17] 17 cycles until SOP
- mov x3, cnt ;1 [-16]
-usbSendX3: ;0 [-16]
- ldi YL, 20 ;1 [-15] 'x3' is R20
- ldi YH, 0 ;1 [-14]
- ldi cnt, 2 ;1 [-13]
-; rjmp usbSendAndReti fallthrough
-
-; USB spec says:
-; idle = J
-; J = (D+ = 0), (D- = 1) or USBOUT = 0x01
-; K = (D+ = 1), (D- = 0) or USBOUT = 0x02
-; Spec allows 7.5 bit times from EOP to SOP for replies (= 60 cycles)
-
-;usbSend:
-;pointer to data in 'Y'
-;number of bytes in 'cnt' -- including sync byte
-;uses: x1...x2, x4, shift, cnt, Y [x1 = mirror USBOUT, x2 = USBMASK, x4 = bitstuff cnt]
-;Numbers in brackets are time since first bit of sync pattern is sent (start of instruction)
-usbSendAndReti:
- in x2, USBDDR ;[-12] 12 cycles until SOP
- ori x2, USBMASK ;[-11]
- sbi USBOUT, USBMINUS ;[-10] prepare idle state; D+ and D- must have been 0 (no pullups)
- out USBDDR, x2 ;[-8] <--- acquire bus
- in x1, USBOUT ;[-7] port mirror for tx loop
- ldi shift, 0x40 ;[-6] sync byte is first byte sent (we enter loop after ror)
- ldi x2, USBMASK ;[-5]
- push x4 ;[-4]
-doExorN1:
- eor x1, x2 ;[-2] [06] [62]
- ldi x4, 6 ;[-1] [07] [63]
-commonN1:
-stuffN2Delay:
- out USBOUT, x1 ;[00] [08] [64] <--- set bit
- ror shift ;[01]
- brcc doExorN2 ;[02]
- subi x4, 1 ;[03]
- brne commonN2 ;[04]
- lsl shift ;[05] compensate ror after rjmp stuffDelay
- rjmp stuffN2Delay ;[06] after ror, C bit is reliably clear
-doExorN2:
- eor x1, x2 ;[04] [12]
- ldi x4, 6 ;[05] [13]
-commonN2:
- nop ;[06] [14]
- subi cnt, 171 ;[07] [15] trick: (3 * 171) & 0xff = 1
- out USBOUT, x1 ;[08] [16] <--- set bit
- brcs txBitloop ;[09] [25] [41]
-
-stuff6Delay:
- ror shift ;[42] [50]
- brcc doExor6 ;[43]
- subi x4, 1 ;[44]
- brne common6 ;[45]
- lsl shift ;[46] compensate ror after rjmp stuffDelay
- nop ;[47] stuffing consists of just waiting 8 cycles
- rjmp stuff6Delay ;[48] after ror, C bit is reliably clear
-doExor6:
- eor x1, x2 ;[45] [53]
- ldi x4, 6 ;[46]
-common6:
-stuff7Delay:
- ror shift ;[47] [55]
- out USBOUT, x1 ;[48] <--- set bit
- brcc doExor7 ;[49]
- subi x4, 1 ;[50]
- brne common7 ;[51]
- lsl shift ;[52] compensate ror after rjmp stuffDelay
- rjmp stuff7Delay ;[53] after ror, C bit is reliably clear
-doExor7:
- eor x1, x2 ;[51] [59]
- ldi x4, 6 ;[52]
-common7:
- ld shift, y+ ;[53]
- tst cnt ;[55]
- out USBOUT, x1 ;[56] <--- set bit
- brne txByteLoop ;[57]
-
-;make SE0:
- cbr x1, USBMASK ;[58] prepare SE0 [spec says EOP may be 15 to 18 cycles]
- lds x2, usbNewDeviceAddr;[59]
- lsl x2 ;[61] we compare with left shifted address
- subi YL, 2 + 20 ;[62] Only assign address on data packets, not ACK/NAK in x3
- sbci YH, 0 ;[63]
- out USBOUT, x1 ;[00] <-- out SE0 -- from now 2 bits = 16 cycles until bus idle
-;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm:
-;set address only after data packet was sent, not after handshake
- breq skipAddrAssign ;[01]
- sts usbDeviceAddr, x2 ; if not skipped: SE0 is one cycle longer
-skipAddrAssign:
-;end of usbDeviceAddress transfer
- ldi x2, 1<<USB_INTR_PENDING_BIT;[03] int0 occurred during TX -- clear pending flag
- USB_STORE_PENDING(x2) ;[04]
- ori x1, USBIDLE ;[05]
- in x2, USBDDR ;[06]
- cbr x2, USBMASK ;[07] set both pins to input
- mov x3, x1 ;[08]
- cbr x3, USBMASK ;[09] configure no pullup on both pins
- pop x4 ;[10]
- nop2 ;[12]
- nop2 ;[14]
- out USBOUT, x1 ;[16] <-- out J (idle) -- end of SE0 (EOP signal)
- out USBDDR, x2 ;[17] <-- release bus now
- out USBOUT, x3 ;[18] <-- ensure no pull-up resistors are active
- rjmp doReturn