diff options
Diffstat (limited to 'platforms/chibios/common/configs')
-rw-r--r-- | platforms/chibios/common/configs/chconf.h | 756 | ||||
-rw-r--r-- | platforms/chibios/common/configs/halconf.h | 531 |
2 files changed, 0 insertions, 1287 deletions
diff --git a/platforms/chibios/common/configs/chconf.h b/platforms/chibios/common/configs/chconf.h deleted file mode 100644 index 44327a82d7..0000000000 --- a/platforms/chibios/common/configs/chconf.h +++ /dev/null @@ -1,756 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_1_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 100000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM FALSE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY FALSE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT FALSE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS FALSE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES FALSE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name OSLIB options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES FALSE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS FALSE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES FALSE -#endif - -/** - * @brief Objects Caches APIs. - * @details If enabled then the objects caches APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_CACHES) -#define CH_CFG_USE_OBJ_CACHES FALSE -#endif - -/** - * @brief Delegate threads APIs. - * @details If enabled then the delegate threads APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_DELEGATES) -#define CH_CFG_USE_DELEGATES FALSE -#endif - -/** - * @brief Jobs Queues APIs. - * @details If enabled then the jobs queues APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_JOBS) -#define CH_CFG_USE_JOBS FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY FALSE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES FALSE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES FALSE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS FALSE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/platforms/chibios/common/configs/halconf.h b/platforms/chibios/common/configs/halconf.h deleted file mode 100644 index 264ae4e6c1..0000000000 --- a/platforms/chibios/common/configs/halconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_1_ - -#include <mcuconf.h> - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EFlash subsystem. - */ -#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__) -#define HAL_USE_EFL FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ |