diff options
Diffstat (limited to 'lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h')
| m--------- | lib/lufa | 0 | ||||
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h | 136 |
2 files changed, 0 insertions, 136 deletions
diff --git a/lib/lufa b/lib/lufa new file mode 160000 +Subproject ce10f7642b0459e409839b23cc91498945119b4 diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h deleted file mode 100644 index e35a1e4a19..0000000000 --- a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for XPROGProtocol.c. - */ - -#ifndef _XPROG_PROTOCOL_ -#define _XPROG_PROTOCOL_ - - /* Includes: */ - #include <avr/io.h> - #include <util/delay.h> - #include <stdio.h> - - #include <LUFA/Drivers/USB/USB.h> - - #include "../V2Protocol.h" - #include "XMEGANVM.h" - #include "TINYNVM.h" - #include "Config/AppConfig.h" - - /* Preprocessor Checks: */ - #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) - /* On the XPLAIN board, we only need PDI programming - for the ATXMEGA128A1 - disable ISP to prevent hardware - damage and force-enable XPROG. - */ - #undef ENABLE_ISP_PROTOCOL - - #if !defined(ENABLE_XPROG_PROTOCOL) - #define ENABLE_XPROG_PROTOCOL - #endif - #endif - - /* Macros: */ - #define XPROG_CMD_ENTER_PROGMODE 0x01 - #define XPROG_CMD_LEAVE_PROGMODE 0x02 - #define XPROG_CMD_ERASE 0x03 - #define XPROG_CMD_WRITE_MEM 0x04 - #define XPROG_CMD_READ_MEM 0x05 - #define XPROG_CMD_CRC 0x06 - #define XPROG_CMD_SET_PARAM 0x07 - - #define XPROG_MEM_TYPE_APPL 1 - #define XPROG_MEM_TYPE_BOOT 2 - #define XPROG_MEM_TYPE_EEPROM 3 - #define XPROG_MEM_TYPE_FUSE 4 - #define XPROG_MEM_TYPE_LOCKBITS 5 - #define XPROG_MEM_TYPE_USERSIG 6 - #define XPROG_MEM_TYPE_FACTORY_CALIBRATION 7 - - #define XPROG_ERASE_CHIP 1 - #define XPROG_ERASE_APP 2 - #define XPROG_ERASE_BOOT 3 - #define XPROG_ERASE_EEPROM 4 - #define XPROG_ERASE_APP_PAGE 5 - #define XPROG_ERASE_BOOT_PAGE 6 - #define XPROG_ERASE_EEPROM_PAGE 7 - #define XPROG_ERASE_USERSIG 8 - - #define XPROG_MEM_WRITE_ERASE 0 - #define XPROG_MEM_WRITE_WRITE 1 - - #define XPROG_CRC_APP 1 - #define XPROG_CRC_BOOT 2 - #define XPROG_CRC_FLASH 3 - - #define XPROG_ERR_OK 0 - #define XPROG_ERR_FAILED 1 - #define XPROG_ERR_COLLISION 2 - #define XPROG_ERR_TIMEOUT 3 - - #define XPROG_PARAM_NVMBASE 0x01 - #define XPROG_PARAM_EEPPAGESIZE 0x02 - #define XPROG_PARAM_NVMCMD_REG 0x03 - #define XPROG_PARAM_NVMCSR_REG 0x04 - #define XPROG_PARAM_UNKNOWN_1 0x05 - - #define XPROG_PROTOCOL_PDI 0x00 - #define XPROG_PROTOCOL_JTAG 0x01 - #define XPROG_PROTOCOL_TPI 0x02 - - #define XPROG_PAGEMODE_WRITE (1 << 1) - #define XPROG_PAGEMODE_ERASE (1 << 0) - - /* External Variables: */ - extern uint32_t XPROG_Param_NVMBase; - extern uint16_t XPROG_Param_EEPageSize; - extern uint8_t XPROG_Param_NVMCSRRegAddr; - extern uint8_t XPROG_Param_NVMCMDRegAddr; - - /* Function Prototypes: */ - void XPROGProtocol_SetMode(void); - void XPROGProtocol_Command(void); - - #if (defined(INCLUDE_FROM_XPROGPROTOCOL_C) && defined(ENABLE_XPROG_PROTOCOL)) - static void XPROGProtocol_EnterXPROGMode(void); - static void XPROGProtocol_LeaveXPROGMode(void); - static void XPROGProtocol_SetParam(void); - static void XPROGProtocol_Erase(void); - static void XPROGProtocol_WriteMemory(void); - static void XPROGProtocol_ReadMemory(void); - static void XPROGProtocol_ReadCRC(void); - #endif - -#endif - |