diff options
Diffstat (limited to 'lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c')
| -rw-r--r-- | lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c | 480 |
1 files changed, 480 insertions, 0 deletions
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c new file mode 100644 index 0000000000..aa5503f3ff --- /dev/null +++ b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c @@ -0,0 +1,480 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * XPROG Protocol handler, to process V2 Protocol wrapped XPROG commands used in Atmel programmer devices. + */ + +#define INCLUDE_FROM_XPROGPROTOCOL_C +#include "XPROGProtocol.h" + +#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__) +/** Base absolute address for the target's NVM controller for PDI programming */ +uint32_t XPROG_Param_NVMBase = 0x010001C0; + +/** Size in bytes of the target's EEPROM page */ +uint16_t XPROG_Param_EEPageSize = 32; + +/** Address of the TPI device's NVMCMD register for TPI programming */ +uint8_t XPROG_Param_NVMCMDRegAddr = 0x33; + +/** Address of the TPI device's NVMCSR register for TPI programming */ +uint8_t XPROG_Param_NVMCSRRegAddr = 0x32; + +/** Currently selected XPROG programming protocol */ +uint8_t XPROG_SelectedProtocol = XPROG_PROTOCOL_PDI; + +/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI + * programming. + */ +void XPROGProtocol_SetMode(void) +{ + struct + { + uint8_t Protocol; + } SetMode_XPROG_Params; + + Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NULL); + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol; + + Endpoint_Write_8(CMD_XPROG_SETMODE); + Endpoint_Write_8((SetMode_XPROG_Params.Protocol != XPROG_PROTOCOL_JTAG) ? STATUS_CMD_OK : STATUS_CMD_FAILED); + Endpoint_ClearIN(); +} + +/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be + * removed and processed so that the underlying XPROG command can be handled. + */ +void XPROGProtocol_Command(void) +{ + uint8_t XPROGCommand = Endpoint_Read_8(); + + switch (XPROGCommand) + { + case XPROG_CMD_ENTER_PROGMODE: + XPROGProtocol_EnterXPROGMode(); + break; + case XPROG_CMD_LEAVE_PROGMODE: + XPROGProtocol_LeaveXPROGMode(); + break; + case XPROG_CMD_ERASE: + XPROGProtocol_Erase(); + break; + case XPROG_CMD_WRITE_MEM: + XPROGProtocol_WriteMemory(); + break; + case XPROG_CMD_READ_MEM: + XPROGProtocol_ReadMemory(); + break; + case XPROG_CMD_CRC: + XPROGProtocol_ReadCRC(); + break; + case XPROG_CMD_SET_PARAM: + XPROGProtocol_SetParam(); + break; + } +} + +/** Handler for the XPROG ENTER_PROGMODE command to establish a connection with the attached device. */ +static void XPROGProtocol_EnterXPROGMode(void) +{ + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + bool NVMBusEnabled = false; + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + NVMBusEnabled = XMEGANVM_EnablePDI(); + else if (XPROG_SelectedProtocol == XPROG_PROTOCOL_TPI) + NVMBusEnabled = TINYNVM_EnableTPI(); + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_ENTER_PROGMODE); + Endpoint_Write_8(NVMBusEnabled ? XPROG_ERR_OK : XPROG_ERR_FAILED); + Endpoint_ClearIN(); +} + +/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with + * the attached device. + */ +static void XPROGProtocol_LeaveXPROGMode(void) +{ + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + XMEGANVM_DisablePDI(); + else + TINYNVM_DisableTPI(); + + #if defined(XCK_RESCUE_CLOCK_ENABLE) && defined(ENABLE_ISP_PROTOCOL) + /* If the XCK rescue clock option is enabled, we need to restart it once the + * XPROG mode has been exited, since the XPROG protocol stops it after use. */ + ISPTarget_ConfigureRescueClock(); + #endif + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_LEAVE_PROGMODE); + Endpoint_Write_8(XPROG_ERR_OK); + Endpoint_ClearIN(); +} + +/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */ +static void XPROGProtocol_Erase(void) +{ + uint8_t ReturnStatus = XPROG_ERR_OK; + + struct + { + uint8_t MemoryType; + uint32_t Address; + } Erase_XPROG_Params; + + Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params), NULL); + Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address); + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t EraseCommand; + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + { + /* Determine which NVM command to send to the device depending on the memory to erase */ + switch (Erase_XPROG_Params.MemoryType) + { + case XPROG_ERASE_CHIP: + EraseCommand = XMEGA_NVM_CMD_CHIPERASE; + break; + case XPROG_ERASE_APP: + EraseCommand = XMEGA_NVM_CMD_ERASEAPPSEC; + break; + case XPROG_ERASE_BOOT: + EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSEC; + break; + case XPROG_ERASE_EEPROM: + EraseCommand = XMEGA_NVM_CMD_ERASEEEPROM; + break; + case XPROG_ERASE_APP_PAGE: + EraseCommand = XMEGA_NVM_CMD_ERASEAPPSECPAGE; + break; + case XPROG_ERASE_BOOT_PAGE: + EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSECPAGE; + break; + case XPROG_ERASE_EEPROM_PAGE: + EraseCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGE; + break; + case XPROG_ERASE_USERSIG: + EraseCommand = XMEGA_NVM_CMD_ERASEUSERSIG; + break; + default: + EraseCommand = XMEGA_NVM_CMD_NOOP; + break; + } + + /* Erase the target memory, indicate timeout if occurred */ + if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address))) + ReturnStatus = XPROG_ERR_TIMEOUT; + } + else + { + if (Erase_XPROG_Params.MemoryType == XPROG_ERASE_CHIP) + EraseCommand = TINY_NVM_CMD_CHIPERASE; + else + EraseCommand = TINY_NVM_CMD_SECTIONERASE; + + /* Erase the target memory, indicate timeout if occurred */ + if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address))) + ReturnStatus = XPROG_ERR_TIMEOUT; + } + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_ERASE); + Endpoint_Write_8(ReturnStatus); + Endpoint_ClearIN(); +} + +/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */ +static void XPROGProtocol_WriteMemory(void) +{ + uint8_t ReturnStatus = XPROG_ERR_OK; + + struct + { + uint8_t MemoryType; + uint8_t PageMode; + uint32_t Address; + uint16_t Length; + uint8_t ProgData[256]; + } WriteMemory_XPROG_Params; + + Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) - + sizeof(WriteMemory_XPROG_Params).ProgData), NULL); + WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address); + WriteMemory_XPROG_Params.Length = SwapEndian_16(WriteMemory_XPROG_Params.Length); + Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length, NULL); + + // The driver will terminate transfers that are a round multiple of the endpoint bank in size with a ZLP, need + // to catch this and discard it before continuing on with packet processing to prevent communication issues + if (((sizeof(uint8_t) + sizeof(WriteMemory_XPROG_Params) - sizeof(WriteMemory_XPROG_Params.ProgData)) + + WriteMemory_XPROG_Params.Length) % AVRISP_DATA_EPSIZE == 0) + { + Endpoint_ClearOUT(); + Endpoint_WaitUntilReady(); + } + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + { + /* Assume FLASH page programming by default, as it is the common case */ + uint8_t WriteCommand = XMEGA_NVM_CMD_WRITEFLASHPAGE; + uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF; + uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF; + bool PagedMemory = true; + + switch (WriteMemory_XPROG_Params.MemoryType) + { + case XPROG_MEM_TYPE_APPL: + WriteCommand = XMEGA_NVM_CMD_WRITEAPPSECPAGE; + break; + case XPROG_MEM_TYPE_BOOT: + WriteCommand = XMEGA_NVM_CMD_WRITEBOOTSECPAGE; + break; + case XPROG_MEM_TYPE_EEPROM: + WriteCommand = XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE; + WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF; + EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF; + break; + case XPROG_MEM_TYPE_USERSIG: + WriteCommand = XMEGA_NVM_CMD_WRITEUSERSIG; + break; + case XPROG_MEM_TYPE_FUSE: + WriteCommand = XMEGA_NVM_CMD_WRITEFUSE; + PagedMemory = false; + break; + case XPROG_MEM_TYPE_LOCKBITS: + WriteCommand = XMEGA_NVM_CMD_WRITELOCK; + PagedMemory = false; + break; + } + + /* Send the appropriate memory write commands to the device, indicate timeout if occurred */ + if ((PagedMemory && !(XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand, + WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address, + WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length))) || + (!PagedMemory && !(XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address, + WriteMemory_XPROG_Params.ProgData[0])))) + { + ReturnStatus = XPROG_ERR_TIMEOUT; + } + } + else + { + /* Send write command to the TPI device, indicate timeout if occurred */ + if (!(TINYNVM_WriteMemory(WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData, + WriteMemory_XPROG_Params.Length))) + { + ReturnStatus = XPROG_ERR_TIMEOUT; + } + } + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_WRITE_MEM); + Endpoint_Write_8(ReturnStatus); + Endpoint_ClearIN(); +} + +/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the + * attached device. + */ +static void XPROGProtocol_ReadMemory(void) +{ + uint8_t ReturnStatus = XPROG_ERR_OK; + + struct + { + uint8_t MemoryType; + uint32_t Address; + uint16_t Length; + } ReadMemory_XPROG_Params; + + Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params), NULL); + ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address); + ReadMemory_XPROG_Params.Length = SwapEndian_16(ReadMemory_XPROG_Params.Length); + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint8_t ReadBuffer[256]; + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + { + /* Read the PDI target's memory, indicate timeout if occurred */ + if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length))) + ReturnStatus = XPROG_ERR_TIMEOUT; + } + else + { + /* Read the TPI target's memory, indicate timeout if occurred */ + if (!(TINYNVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length))) + ReturnStatus = XPROG_ERR_TIMEOUT; + } + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_READ_MEM); + Endpoint_Write_8(ReturnStatus); + + if (ReturnStatus == XPROG_ERR_OK) + Endpoint_Write_Stream_LE(ReadBuffer, ReadMemory_XPROG_Params.Length, NULL); + + Endpoint_ClearIN(); +} + +/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the + * attached device's memory and a data set on the host. + */ +static void XPROGProtocol_ReadCRC(void) +{ + uint8_t ReturnStatus = XPROG_ERR_OK; + + struct + { + uint8_t CRCType; + } ReadCRC_XPROG_Params; + + Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NULL); + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + uint32_t MemoryCRC; + + if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI) + { + uint8_t CRCCommand; + + /* Determine which NVM command to send to the device depending on the memory to CRC */ + switch (ReadCRC_XPROG_Params.CRCType) + { + case XPROG_CRC_APP: + CRCCommand = XMEGA_NVM_CMD_APPCRC; + break; + case XPROG_CRC_BOOT: + CRCCommand = XMEGA_NVM_CMD_BOOTCRC; + break; + default: + CRCCommand = XMEGA_NVM_CMD_FLASHCRC; + break; + } + + /* Perform and retrieve the memory CRC, indicate timeout if occurred */ + if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC))) + ReturnStatus = XPROG_ERR_TIMEOUT; + } + else + { + /* TPI does not support memory CRC */ + ReturnStatus = XPROG_ERR_FAILED; + } + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_CRC); + Endpoint_Write_8(ReturnStatus); + + if (ReturnStatus == XPROG_ERR_OK) + { + Endpoint_Write_8(MemoryCRC >> 16); + Endpoint_Write_16_LE(MemoryCRC & 0xFFFF); + } + + Endpoint_ClearIN(); +} + +/** Handler for the XPROG SET_PARAM command to set a XPROG parameter for use when communicating with the + * attached device. + */ +static void XPROGProtocol_SetParam(void) +{ + uint8_t ReturnStatus = XPROG_ERR_OK; + + uint8_t XPROGParam = Endpoint_Read_8(); + + /* Determine which parameter is being set, store the new parameter value */ + switch (XPROGParam) + { + case XPROG_PARAM_NVMBASE: + XPROG_Param_NVMBase = Endpoint_Read_32_BE(); + break; + case XPROG_PARAM_EEPPAGESIZE: + XPROG_Param_EEPageSize = Endpoint_Read_16_BE(); + break; + case XPROG_PARAM_NVMCMD_REG: + XPROG_Param_NVMCMDRegAddr = Endpoint_Read_8(); + break; + case XPROG_PARAM_NVMCSR_REG: + XPROG_Param_NVMCSRRegAddr = Endpoint_Read_8(); + break; + case XPROG_PARAM_UNKNOWN_1: + /* TODO: Undocumented parameter added in AVRStudio 5.1, purpose unknown. Must ACK and discard or + the communication with AVRStudio 5.1 will fail. + */ + Endpoint_Discard_16(); + break; + default: + ReturnStatus = XPROG_ERR_FAILED; + break; + } + + Endpoint_ClearOUT(); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); + Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); + + Endpoint_Write_8(CMD_XPROG); + Endpoint_Write_8(XPROG_CMD_SET_PARAM); + Endpoint_Write_8(ReturnStatus); + Endpoint_ClearIN(); +} + +#endif + |