diff options
Diffstat (limited to 'lib/lufa/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h')
| -rw-r--r-- | lib/lufa/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/lib/lufa/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h b/lib/lufa/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h new file mode 100644 index 0000000000..12b54f8dfb --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h @@ -0,0 +1,161 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Device mode driver for the library USB Mass Storage Class driver. + * + * Device mode driver for the library USB Mass Storage Class driver. + * + * \note This file should not be included directly. It is automatically included as needed by the USB module driver + * dispatch header located in LUFA/Drivers/USB.h. + */ + +/** \ingroup Group_USBClassMS + * \defgroup Group_USBClassMSDevice Mass Storage Class Device Mode Driver + * + * \section Sec_USBClassMSDevice_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i> + * + * \section Sec_USBClassMSDevice_ModDescription Module Description + * Device Mode USB Class driver framework interface, for the Mass Storage USB Class driver. + * + * @{ + */ + +#ifndef _MS_CLASS_DEVICE_H_ +#define _MS_CLASS_DEVICE_H_ + + /* Includes: */ + #include "../../USB.h" + #include "../Common/MassStorageClassCommon.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_MS_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Type Defines: */ + /** \brief Mass Storage Class Device Mode Configuration and State Structure. + * + * Class state structure. An instance of this structure should be made for each Mass Storage interface + * within the user application, and passed to each of the Mass Storage class driver functions as the + * \c MSInterfaceInfo parameter. This stores each Mass Storage interface's configuration and state information. + */ + typedef struct + { + struct + { + uint8_t InterfaceNumber; /**< Interface number of the Mass Storage interface within the device. */ + + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ + + uint8_t TotalLUNs; /**< Total number of logical drives in the Mass Storage interface. */ + } Config; /**< Config data for the USB class interface within the device. All elements in this section + * <b>must</b> be set or the interface will fail to enumerate and operate correctly. + */ + struct + { + MS_CommandBlockWrapper_t CommandBlock; /**< Mass Storage class command block structure, stores the received SCSI + * command from the host which is to be processed. + */ + MS_CommandStatusWrapper_t CommandStatus; /**< Mass Storage class command status structure, set elements to indicate + * the issued command's success or failure to the host. + */ + volatile bool IsMassStoreReset; /**< Flag indicating that the host has requested that the Mass Storage interface be reset + * and that all current Mass Storage operations should immediately abort. + */ + } State; /**< State data for the USB class interface within the device. All elements in this section + * are reset to their defaults when the interface is enumerated. + */ + } USB_ClassInfo_MS_Device_t; + + /* Function Prototypes: */ + /** Configures the endpoints of a given Mass Storage interface, ready for use. This should be linked to the library + * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration + * containing the given Mass Storage interface is selected. + * + * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state. + * + * \return Boolean \c true if the endpoints were successfully configured, \c false otherwise. + */ + bool MS_Device_ConfigureEndpoints(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Processes incoming control requests from the host, that are directed to the given Mass Storage class interface. This should be + * linked to the library \ref EVENT_USB_Device_ControlRequest() event. + * + * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state. + */ + void MS_Device_ProcessControlRequest(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** General management task for a given Mass Storage class interface, required for the correct operation of the interface. This should + * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask(). + * + * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage configuration and state. + */ + void MS_Device_USBTask(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Mass Storage class driver callback for the user processing of a received SCSI command. This callback will fire each time the + * host sends a SCSI command which requires processing by the user application. Inside this callback the user is responsible + * for the processing of the received SCSI command from the host. The SCSI command is available in the CommandBlock structure + * inside the Mass Storage class state structure passed as a parameter to the callback function. + * + * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state. + * + * \return Boolean \c true if the SCSI command was successfully processed, \c false otherwise. + */ + bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_MASSSTORAGE_DEVICE_C) + static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + #endif + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + |