diff options
Diffstat (limited to 'lib/lufa/LUFA/Drivers/Misc/TerminalCodes.h')
| m--------- | lib/lufa | 0 | ||||
| -rw-r--r-- | lib/lufa/LUFA/Drivers/Misc/TerminalCodes.h | 231 |
2 files changed, 0 insertions, 231 deletions
diff --git a/lib/lufa b/lib/lufa new file mode 160000 +Subproject ce10f7642b0459e409839b23cc91498945119b4 diff --git a/lib/lufa/LUFA/Drivers/Misc/TerminalCodes.h b/lib/lufa/LUFA/Drivers/Misc/TerminalCodes.h deleted file mode 100644 index b12a247ed1..0000000000 --- a/lib/lufa/LUFA/Drivers/Misc/TerminalCodes.h +++ /dev/null @@ -1,231 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief ANSI terminal special escape code macros. - * - * ANSI terminal compatible escape sequences. These escape sequences are designed to be concatenated with existing - * strings to modify their display on a compatible terminal application. - */ - -/** \ingroup Group_MiscDrivers - * \defgroup Group_Terminal ANSI Terminal Escape Codes - LUFA/Drivers/Misc/TerminalCodes.h - * \brief ANSI terminal special escape code macros. - * - * \section Sec_Terminal_Dependencies Module Source Dependencies - * The following files must be built with any user project that uses this module: - * - None - * - * \section Sec_Terminal_ModDescription Module Description - * Escape code macros for ANSI compliant text terminals. - * - * \note If desired, the macro \c DISABLE_TERMINAL_CODES can be defined in the project makefile and passed to the GCC - * compiler via the -D switch to disable the terminal codes without modifying the source, for use with non - * compatible terminals (any terminal codes then equate to empty strings). - * - * \section Sec_Terminal_ExampleUsage Example Usage - * The following snippet is an example of how this module may be used within a typical - * application. - * - * \code - * printf("Normal String, " - * ESC_BOLD_ON "Bold String, " - * ESC_UNDERLINE_ON "Bold and Underlined String" - * ESC_RESET ESC_FG_BLUE ESC_BG_YELLOW "Normal Blue-on-Yellow String"); - * \endcode - * - * @{ - */ - -#ifndef __TERMINALCODES_H__ -#define __TERMINALCODES_H__ - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - #if !defined(DISABLE_TERMINAL_CODES) - /** Creates an ANSI escape sequence with the specified payload. - * - * \param[in] EscapeSeq Payload to encode as an ANSI escape sequence, a \c ESC_* mask. - */ - #define ANSI_ESCAPE_SEQUENCE(EscapeSeq) "\33[" EscapeSeq - #else - #define ANSI_ESCAPE_SEQUENCE(EscapeSeq) - #endif - - /** \name Text Display Modifier Control Sequences */ - //@{ - /** Turns on bold so that any following text is printed to the terminal in bold. */ - #define ESC_BOLD_ON ANSI_ESCAPE_SEQUENCE("1m") - - /** Turns on italics so that any following text is printed to the terminal in italics. */ - #define ESC_ITALICS_ON ANSI_ESCAPE_SEQUENCE("3m") - - /** Turns on underline so that any following text is printed to the terminal underlined. */ - #define ESC_UNDERLINE_ON ANSI_ESCAPE_SEQUENCE("4m") - - /** Turns on inverse so that any following text is printed to the terminal in inverted colours. */ - #define ESC_INVERSE_ON ANSI_ESCAPE_SEQUENCE("7m") - - /** Turns on strike-through so that any following text is printed to the terminal with a line through the - * center. - */ - #define ESC_STRIKETHROUGH_ON ANSI_ESCAPE_SEQUENCE("9m") - - /** Turns off bold so that any following text is printed to the terminal in non bold. */ - #define ESC_BOLD_OFF ANSI_ESCAPE_SEQUENCE("22m") - - /** Turns off italics so that any following text is printed to the terminal in non italics. */ - #define ESC_ITALICS_OFF ANSI_ESCAPE_SEQUENCE("23m") - - /** Turns off underline so that any following text is printed to the terminal non underlined. */ - #define ESC_UNDERLINE_OFF ANSI_ESCAPE_SEQUENCE("24m") - - /** Turns off inverse so that any following text is printed to the terminal in non inverted colours. */ - #define ESC_INVERSE_OFF ANSI_ESCAPE_SEQUENCE("27m") - - /** Turns off strike-through so that any following text is printed to the terminal without a line through - * the center. - */ - #define ESC_STRIKETHROUGH_OFF ANSI_ESCAPE_SEQUENCE("29m") - //@} - - /** \name Text Colour Control Sequences */ - //@{ - /** Sets the foreground (text) colour to black. */ - #define ESC_FG_BLACK ANSI_ESCAPE_SEQUENCE("30m") - - /** Sets the foreground (text) colour to red. */ - #define ESC_FG_RED ANSI_ESCAPE_SEQUENCE("31m") - - /** Sets the foreground (text) colour to green. */ - #define ESC_FG_GREEN ANSI_ESCAPE_SEQUENCE("32m") - - /** Sets the foreground (text) colour to yellow. */ - #define ESC_FG_YELLOW ANSI_ESCAPE_SEQUENCE("33m") - - /** Sets the foreground (text) colour to blue. */ - #define ESC_FG_BLUE ANSI_ESCAPE_SEQUENCE("34m") - - /** Sets the foreground (text) colour to magenta. */ - #define ESC_FG_MAGENTA ANSI_ESCAPE_SEQUENCE("35m") - - /** Sets the foreground (text) colour to cyan. */ - #define ESC_FG_CYAN ANSI_ESCAPE_SEQUENCE("36m") - - /** Sets the foreground (text) colour to white. */ - #define ESC_FG_WHITE ANSI_ESCAPE_SEQUENCE("37m") - - /** Sets the foreground (text) colour to the terminal's default. */ - #define ESC_FG_DEFAULT ANSI_ESCAPE_SEQUENCE("39m") - - /** Sets the text background colour to black. */ - #define ESC_BG_BLACK ANSI_ESCAPE_SEQUENCE("40m") - - /** Sets the text background colour to red. */ - #define ESC_BG_RED ANSI_ESCAPE_SEQUENCE("41m") - - /** Sets the text background colour to green. */ - #define ESC_BG_GREEN ANSI_ESCAPE_SEQUENCE("42m") - - /** Sets the text background colour to yellow. */ - #define ESC_BG_YELLOW ANSI_ESCAPE_SEQUENCE("43m") - - /** Sets the text background colour to blue. */ - #define ESC_BG_BLUE ANSI_ESCAPE_SEQUENCE("44m") - - /** Sets the text background colour to magenta. */ - #define ESC_BG_MAGENTA ANSI_ESCAPE_SEQUENCE("45m") - - /** Sets the text background colour to cyan. */ - #define ESC_BG_CYAN ANSI_ESCAPE_SEQUENCE("46m") - - /** Sets the text background colour to white. */ - #define ESC_BG_WHITE ANSI_ESCAPE_SEQUENCE("47m") - - /** Sets the text background colour to the terminal's default. */ - #define ESC_BG_DEFAULT ANSI_ESCAPE_SEQUENCE("49m") - //@} - - /** \name Cursor Positioning Control Sequences */ - //@{ - /** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */ - #define ESC_CURSOR_POS_SAVE ANSI_ESCAPE_SEQUENCE("s") - - /** Restores the cursor position to the last position saved with \ref ESC_CURSOR_POS_SAVE. */ - #define ESC_CURSOR_POS_RESTORE ANSI_ESCAPE_SEQUENCE("u") - - /** Sets the cursor position to the given line and column. - * - * \param[in] Line Line number to position the cursor at. - * \param[in] Column Column number to position the cursor at. - */ - #define ESC_CURSOR_POS(Line, Column) ANSI_ESCAPE_SEQUENCE(#Line ";" #Column "H") - - /** Moves the cursor up the given number of lines. - * - * \param[in] Lines Number of lines to move the cursor position - */ - #define ESC_CURSOR_UP(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "A") - - /** Moves the cursor down the given number of lines. - * - * \param[in] Lines Number of lines to move the cursor position - */ - #define ESC_CURSOR_DOWN(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "B") - - /** Moves the cursor to the right the given number of columns. - * - * \param[in] Columns Number of columns to move the cursor position - */ - #define ESC_CURSOR_FORWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "C") - - /** Moves the cursor to the left the given number of columns. - * - * \param[in] Columns Number of columns to move the cursor position - */ - #define ESC_CURSOR_BACKWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "D") - //@} - - /** \name Miscellaneous Control Sequences */ - //@{ - /** Resets any escape sequence modifiers back to their defaults. */ - #define ESC_RESET ANSI_ESCAPE_SEQUENCE("0m") - - /** Erases the entire display, returning the cursor to the top left. */ - #define ESC_ERASE_DISPLAY ANSI_ESCAPE_SEQUENCE("2J") - - /** Erases the current line, returning the cursor to the far left. */ - #define ESC_ERASE_LINE ANSI_ESCAPE_SEQUENCE("K") - //@} - -#endif - -/** @} */ - |