2 files changed, 0 insertions, 71 deletions
diff --git a/lib/lufa b/lib/lufa
new file mode 160000
+Subproject ce10f7642b0459e409839b23cc91498945119b4
diff --git a/lib/lufa/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt b/lib/lufa/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt
deleted file mode 100644
index 9eba4ed864..0000000000
--- a/lib/lufa/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Joystick Host With HID Descriptor Parser Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Joystick host demonstration application. This gives a simple reference
- *  application for implementing a USB Joystick host, for USB joysticks using
- *  the standard joystick HID profile. It uses a HID parser for the HID
- *  reports, allowing for correct operation across all USB joysticks. This
- *  demo supports joysticks with a single HID report.
- *
- *  Joystick movement and button presses are displayed on the board LEDs.
- *  On connection to a USB joystick, the report items will be processed and
- *  printed as a formatted list through the USART before the joystick is
- *  fully enumerated.
- *
- *  Currently only single interface joysticks are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-