summaryrefslogtreecommitdiff
path: root/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.c
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.c')
-rw-r--r--lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.c224
1 files changed, 224 insertions, 0 deletions
diff --git a/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.c b/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.c
new file mode 100644
index 0000000000..0fdb04597c
--- /dev/null
+++ b/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.c
@@ -0,0 +1,224 @@
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2017.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaims all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Main source file for the MIDI input demo. This file contains the main tasks of the demo and
+ * is responsible for the initial application hardware configuration.
+ */
+
+#include "MIDI.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ * enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+ SetupHardware();
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+ GlobalInterruptEnable();
+
+ for (;;)
+ {
+ MIDI_Task();
+ USB_USBTask();
+ }
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+ /* Disable watchdog if enabled by bootloader/fuses */
+ MCUSR &= ~(1 << WDRF);
+ wdt_disable();
+
+ /* Disable clock division */
+ clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+ /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+ XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+ XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+ /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+ XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+ XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+ PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+ /* Hardware Initialization */
+ Joystick_Init();
+ LEDs_Init();
+ Buttons_Init();
+ USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
+void EVENT_USB_Device_Connect(void)
+{
+ /* Indicate USB enumerating */
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ * the status LEDs, disables the sample update and PWM output timers and stops the USB and MIDI management tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+ /* Indicate USB not ready */
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ * of the USB device after enumeration - the device endpoints are configured and the MIDI management task started.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+ bool ConfigSuccess = true;
+
+ /* Setup MIDI Data Endpoints */
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1);
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1);
+
+ /* Indicate endpoint configuration success or failure */
+ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Task to handle the generation of MIDI note change events in response to presses of the board joystick, and send them
+ * to the host.
+ */
+void MIDI_Task(void)
+{
+ static uint8_t PrevJoystickStatus;
+
+ /* Device must be connected and configured for the task to run */
+ if (USB_DeviceState != DEVICE_STATE_Configured)
+ return;
+
+ Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPADDR);
+
+ if (Endpoint_IsINReady())
+ {
+ uint8_t MIDICommand = 0;
+ uint8_t MIDIPitch;
+
+ uint8_t JoystickStatus = Joystick_GetStatus();
+ uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
+
+ /* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
+ uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));
+
+ if (JoystickChanges & JOY_LEFT)
+ {
+ MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+ MIDIPitch = 0x3C;
+ }
+
+ if (JoystickChanges & JOY_UP)
+ {
+ MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+ MIDIPitch = 0x3D;
+ }
+
+ if (JoystickChanges & JOY_RIGHT)
+ {
+ MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+ MIDIPitch = 0x3E;
+ }
+
+ if (JoystickChanges & JOY_DOWN)
+ {
+ MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+ MIDIPitch = 0x3F;
+ }
+
+ if (JoystickChanges & JOY_PRESS)
+ {
+ MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
+ MIDIPitch = 0x3B;
+ }
+
+ /* Check if a MIDI command is to be sent */
+ if (MIDICommand)
+ {
+ MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
+ {
+ .Event = MIDI_EVENT(0, MIDICommand),
+
+ .Data1 = MIDICommand | Channel,
+ .Data2 = MIDIPitch,
+ .Data3 = MIDI_STANDARD_VELOCITY,
+ };
+
+ /* Write the MIDI event packet to the endpoint */
+ Endpoint_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
+
+ /* Send the data in the endpoint to the host */
+ Endpoint_ClearIN();
+ }
+
+ /* Save previous joystick value for next joystick change detection */
+ PrevJoystickStatus = JoystickStatus;
+ }
+
+ /* Select the MIDI OUT stream */
+ Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPADDR);
+
+ /* Check if a MIDI command has been received */
+ if (Endpoint_IsOUTReceived())
+ {
+ MIDI_EventPacket_t MIDIEvent;
+
+ /* Read the MIDI event packet from the endpoint */
+ Endpoint_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
+
+ /* Check to see if the sent command is a note on message with a non-zero velocity */
+ if ((MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && (MIDIEvent.Data3 > 0))
+ {
+ /* Change LEDs depending on the pitch of the sent note */
+ LEDs_SetAllLEDs(MIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2);
+ }
+ else
+ {
+ /* Turn off all LEDs in response to non Note On messages */
+ LEDs_SetAllLEDs(LEDS_NO_LEDS);
+ }
+
+ /* If the endpoint is now empty, clear the bank */
+ if (!(Endpoint_BytesInEndpoint()))
+ {
+ /* Clear the endpoint ready for new packet */
+ Endpoint_ClearOUT();
+ }
+ }
+}
+