summaryrefslogtreecommitdiff
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/pearl/README.md85
-rw-r--r--keyboards/pearl/keymaps/rask/.editorconfig5
-rw-r--r--keyboards/pearl/keymaps/rask/README.md23
-rw-r--r--keyboards/pearl/keymaps/rask/keymap.c87
4 files changed, 200 insertions, 0 deletions
diff --git a/keyboards/pearl/README.md b/keyboards/pearl/README.md
new file mode 100644
index 0000000000..ec54ba80f5
--- /dev/null
+++ b/keyboards/pearl/README.md
@@ -0,0 +1,85 @@
+# Pearl 40%
+
+Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel
+ATMEGA32A MCU.
+
+## Compiling and flashing
+
+These instructions are for building and flashing your Pearl 40% without
+Bootmapper Client.
+
+### Requirements
+
+#### Windows
+
+(to be written, help needed)
+
+#### Mac
+
+Apart from regular QMK and AVR dependencies you need to install
+`bootloadHID`. You can install it with `homebrew` as follows:
+
+ $ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+
+If you don't use `homebrew` you can try following the compiling
+instructions defined below in the Linux section.
+
+#### Linux
+
+For Linux you require all regular QMK dependencies, but make sure you're
+using `gcc-avr` version 4.9 or higher. 4.8 and lower do not contain the
+proper definitions for ATMEGA32A MCUs and QMK will fail while attempting
+to compile a HEX for Pearl 40%.
+
+E.g. you cannot compile Pearl 40% HEX on a regular Ubuntu 14.04 as
+`gcc-avr` version is maxed to 4.8 on it.
+
+Additionally you need an operational `bootloadHID` binary.
+
+You can install `bootloadHID` by taking the following steps:
+
+ $ git clone https://github.com/robertgzr/bootloadHID ~/tmp/bootloadHIDsrc
+ $ cd ~/tmp/bootloadHIDsrc/commandline
+ $ make VENDORID=0x16c0 PRODUCTID=0x05DF # vid and pid for atmega32a
+ $ chmod +x bootloadHID && cp bootloadHID /usr/bin/bootloadHID
+
+Running `which bootloadHID` should return `/usr/bin/bootloadHID`.
+
+### Compiling
+
+Enter the QMK root directory and compile a keymap with the following
+command:
+
+ $ make pearl:<keymap>
+
+where `<keymap>` is a layout directory under the `pearl` directory.
+
+QMK should compile a HEX (called `pearl_<keymap>.hex`) for you, which
+you can flash using `bootloadHID`.
+
+### Flashing
+
+To enable Pearl 40% bootloading mode, unplug the keyboard, then plug it
+in while holding `Esc` at the same time (the top-leftmost switch on the
+PCB, next to the USB connector). Once the board is in bootload mode,
+issue the following command (you might require `sudo` to perform the
+command):
+
+ # assuming we're still in the QMK root dir where you compiled a HEX into
+ $ bootloadHID -r ./pearl_<keymap>.hex
+
+You should see something similar to
+
+ > Page size = <value>
+ > Device size = <value>; <value> remaining
+ > Uploading <value> bytes starting at 0 (0x0)
+ > <value> ... <current value>
+
+where `<current value>` should be slowly increasing as the HEX is being
+flashed to the board. If there is some warning about `resource busy` it
+should still work OK.
+
+Once done the board underglow should turn red and the new firmware has
+been flashed. If you can't type on the board try plugging it in again
+(without holding any keys to prevent accidentally setting it into
+bootload mode again).
diff --git a/keyboards/pearl/keymaps/rask/.editorconfig b/keyboards/pearl/keymaps/rask/.editorconfig
new file mode 100644
index 0000000000..866353dcd6
--- /dev/null
+++ b/keyboards/pearl/keymaps/rask/.editorconfig
@@ -0,0 +1,5 @@
+root = true
+
+[*.c]
+indent_size = 4
+indent_style = space
diff --git a/keyboards/pearl/keymaps/rask/README.md b/keyboards/pearl/keymaps/rask/README.md
new file mode 100644
index 0000000000..79465ffd9d
--- /dev/null
+++ b/keyboards/pearl/keymaps/rask/README.md
@@ -0,0 +1,23 @@
+# rask's Pearl 40%
+
+## Layout
+
+The firmware offers five layers:
+
+1. Base layer
+2. Base with numbers and symbols (Fn1)
+3. Base with F-row and arrows (Fn2)
+4. Base with media and RGB controls (Fn3)
+5. More nav and utils (Fn2+Fn3, aka NavFn)
+
+![rask's Pearl 40% layout](https://i.imgur.com/gKVQapZ.png)
+
+Base for this firmware copied from jetpacktuxedo's QMK firmware.
+
+---
+
+## Compiling and flashing
+
+To compile a HEX follow the Pearl 40% instructions.
+
+Flashing instructions also available at Pearl 40% instructions.
diff --git a/keyboards/pearl/keymaps/rask/keymap.c b/keyboards/pearl/keymaps/rask/keymap.c
new file mode 100644
index 0000000000..b9f1350939
--- /dev/null
+++ b/keyboards/pearl/keymaps/rask/keymap.c
@@ -0,0 +1,87 @@
+#include "pearl.h"
+
+#define ____ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ // BASE LAYER
+ [0] = KEYMAP(
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
+ MO(2), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(3),
+ KC_LCTL, KC_LALT, KC_BSPC, MO(1), MO(1), KC_SPC, KC_RALT, KC_LGUI
+ ),
+ // BASE LAYER TWO (Fn1)
+ [1] = KEYMAP(
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_QUOT, KC_BSLS,
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_RSFT,
+ ____, ____, ____, ____, ____, ____, ____, ____
+ ),
+ // FROW LAYER AND ARROWS (Fn2)
+ [2] = KEYMAP(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_UP, ____, ____,
+ ____, ____, ____, ____, ____, ____, ____, ____, KC_LEFT, KC_DOWN,KC_RGHT, MO(4),
+ ____, ____, ____, ____, ____, ____, ____, ____
+ ),
+ // MEDIA AND RGB (Fn3)
+ [3] = KEYMAP(
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_MPRV,KC_MPLY, KC_MNXT, KC_DEL,
+ ____, ____, ____, RGB_HUI, RGB_SAI,RGB_VAI,____, ____, ____, ____, ____, ____,
+ ____, RGB_MOD, RGB_TOG, RGB_HUD, RGB_SAD,RGB_VAD,____, ____, ____, ____, ____, ____,
+ ____, ____, ____, ____, ____, ____, ____, ____
+ ),
+ // UTIL (Fn1+Fn3)
+ [4] = KEYMAP(
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_PSCR, ____,
+ ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_PGUP,____, ____,
+ ____, ____, ____, ____, ____, ____, ____, ____, KC_HOME, KC_PGDN,KC_END, ____,
+ RESET, ____, ____, ____, ____, ____, ____, ____
+ ),
+};
+
+/**
+ * Status LED layer indicators courtesy of jetpacktuxedo's firmware
+ */
+uint32_t layer_state_set_kb(uint32_t state)
+{
+ // if we are on layer 1
+ if (state & (1<<1)){
+ // light num lock led
+ PORTD |= (1 << PD0);
+ } else{
+ PORTD &= ~(1 << PD0);
+ }
+
+ // if we are on layer 2
+ if (state & (1<<2)){
+ // light caps lock led
+ PORTD |= (1 << PD1);
+ } else{
+ PORTD &= ~(1 << PD1);
+ }
+
+ // if we are on layer 3
+ if (state & (1<<3)){
+ // light scroll lock led
+ PORTD |= (1 << PD6);
+ } else{
+ PORTD &= ~(1 << PD6);
+ }
+
+ /*
+ // if we are on layer 4
+ if (state & (1<<4)){
+ // light all leds
+ PORTD |= (1 << PD0);
+ PORTD |= (1 << PD1);
+ PORTD |= (1 << PD6);
+ } else{
+ PORTD &= ~(1 << PD0);
+ PORTD &= ~(1 << PD1);
+ PORTD &= ~(1 << PD6);
+ }
+ */
+
+ return state;
+}