diff options
Diffstat (limited to 'keyboards')
66 files changed, 187 insertions, 235 deletions
diff --git a/keyboards/acheron/apollo/87h/gamma/config.h b/keyboards/acheron/apollo/87h/gamma/config.h index e8600a18f1..151239ba33 100644 --- a/keyboards/acheron/apollo/87h/gamma/config.h +++ b/keyboards/acheron/apollo/87h/gamma/config.h @@ -30,7 +30,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS31FL3741_DRIVER_COUNT 1 #define DRIVER_1_LED_TOTAL 87 #define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL -#define ISSI_DRIVER_TOTAL RGB_MATRIX_LED_COUNT #define RGB_MATRIX_DEFAULT_VAL 80 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS diff --git a/keyboards/aeboards/satellite/rev1/config.h b/keyboards/aeboards/satellite/rev1/config.h index fcf3105f0f..7a06288394 100644 --- a/keyboards/aeboards/satellite/rev1/config.h +++ b/keyboards/aeboards/satellite/rev1/config.h @@ -23,8 +23,8 @@ #define IS31FL3731_DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 36 #define DRIVER_2_LED_TOTAL 36 -#define ISSI_DRIVER_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) -#define RGB_MATRIX_LED_COUNT ISSI_DRIVER_TOTAL +#define IS31FL3731_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#define RGB_MATRIX_LED_COUNT IS31FL3731_LED_COUNT #define RGB_MATRIX_DEFAULT_VAL 80 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS diff --git a/keyboards/aeboards/satellite/rev1/rev1.c b/keyboards/aeboards/satellite/rev1/rev1.c index 4c6e7d6d7c..6727894e06 100644 --- a/keyboards/aeboards/satellite/rev1/rev1.c +++ b/keyboards/aeboards/satellite/rev1/rev1.c @@ -18,7 +18,7 @@ #include "drivers/led/issi/is31fl3731.h" #ifdef RGB_MATRIX_ENABLE -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -149,7 +149,7 @@ static void init(void) { is31fl3731_init(IS31FL3731_I2C_ADDRESS_1); is31fl3731_init(IS31FL3731_I2C_ADDRESS_2); - for (int index = 0; index < ISSI_DRIVER_TOTAL; index++) { + for (int index = 0; index < IS31FL3731_LED_COUNT; index++) { bool enabled = !( ( index == 18+5) || //B5 ( index == 36+17) || //C17 ( index == 54+13) //D13 diff --git a/keyboards/fallacy/config.h b/keyboards/fallacy/config.h index 254f809c34..65cea1d5c1 100755 --- a/keyboards/fallacy/config.h +++ b/keyboards/fallacy/config.h @@ -20,7 +20,7 @@ */ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_DRIVER_COUNT 1 -#define LED_MATRIX_LED_COUNT 3 +#define IS31FL3731_LED_COUNT 3 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/fallacy/indicators.c b/keyboards/fallacy/indicators.c index a8630d2e11..b95786db41 100755 --- a/keyboards/fallacy/indicators.c +++ b/keyboards/fallacy/indicators.c @@ -22,14 +22,7 @@ * init IS31FL3731 and i2c */ void init_fallacy_leds(void) { - i2c_init(); - is31fl3731_init(IS31FL3731_I2C_ADDRESS_1); - - for (int i = 0; i < LED_MATRIX_LED_COUNT; i++) { - is31fl3731_set_led_control_register(i, true); - } - - is31fl3731_update_led_control_registers(IS31FL3731_I2C_ADDRESS_1, 0); + is31fl3731_init_drivers(); } @@ -54,7 +47,7 @@ void set_fallacy_led(int index, bool state) { /* define LED matrix */ -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[LED_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { {0, C1_1}, {0, C2_1}, {0, C3_1}, diff --git a/keyboards/hs60/v2/ansi/config.h b/keyboards/hs60/v2/ansi/config.h index 3600b30feb..e4dc24dc33 100644 --- a/keyboards/hs60/v2/ansi/config.h +++ b/keyboards/hs60/v2/ansi/config.h @@ -55,7 +55,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND #define IS31FL3733_DRIVER_COUNT 1 -#define RGB_MATRIX_LED_COUNT 64 +#define IS31FL3733_LED_COUNT 64 // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for diff --git a/keyboards/hs60/v2/hhkb/config.h b/keyboards/hs60/v2/hhkb/config.h index bdc27435cf..029e1ebb18 100644 --- a/keyboards/hs60/v2/hhkb/config.h +++ b/keyboards/hs60/v2/hhkb/config.h @@ -55,7 +55,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND #define IS31FL3733_DRIVER_COUNT 1 -#define RGB_MATRIX_LED_COUNT 64 +#define IS31FL3733_LED_COUNT 64 // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for diff --git a/keyboards/hs60/v2/iso/config.h b/keyboards/hs60/v2/iso/config.h index 9a9a4ed623..52cada51a6 100644 --- a/keyboards/hs60/v2/iso/config.h +++ b/keyboards/hs60/v2/iso/config.h @@ -52,7 +52,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND #define IS31FL3733_DRIVER_COUNT 1 -#define RGB_MATRIX_LED_COUNT 64 +#define IS31FL3733_LED_COUNT 64 // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for diff --git a/keyboards/input_club/k_type/config.h b/keyboards/input_club/k_type/config.h index d6abd39a83..c188038a82 100644 --- a/keyboards/input_club/k_type/config.h +++ b/keyboards/input_club/k_type/config.h @@ -34,7 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT #ifdef RGB_MATRIX_ENABLE -//#include "gpio.h" // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects @@ -106,7 +105,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND # define IS31FL3733_I2C_ADDRESS_2 IS31FL3733_I2C_ADDRESS_GND_GND # define IS31FL3733_DRIVER_COUNT 2 +# define IS31FL3733_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) # define DRIVER_1_LED_TOTAL 64 # define DRIVER_2_LED_TOTAL 55 -# define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +# define RGB_MATRIX_LED_COUNT IS31FL3733_LED_COUNT #endif diff --git a/keyboards/input_club/k_type/i2c_master.h b/keyboards/input_club/k_type/i2c_master.h index d4e9d6878f..db4f12e43c 100644 --- a/keyboards/input_club/k_type/i2c_master.h +++ b/keyboards/input_club/k_type/i2c_master.h @@ -26,6 +26,7 @@ #include <ch.h> #include <hal.h> +#include "gpio.h" #ifndef I2C_COUNT # define I2C_COUNT 1 diff --git a/keyboards/input_club/k_type/is31fl3733-dual.c b/keyboards/input_club/k_type/is31fl3733-dual.c index 54e9d76960..0b6c6a607c 100644 --- a/keyboards/input_club/k_type/is31fl3733-dual.c +++ b/keyboards/input_club/k_type/is31fl3733-dual.c @@ -60,6 +60,19 @@ # define IS31FL3733_GLOBALCURRENT 0xFF #endif +#ifndef IS31FL3733_SYNC_1 +# define IS31FL3733_SYNC_1 IS31FL3733_SYNC_NONE +#endif +#ifndef IS31FL3733_SYNC_2 +# define IS31FL3733_SYNC_2 IS31FL3733_SYNC_NONE +#endif +#ifndef IS31FL3733_SYNC_3 +# define IS31FL3733_SYNC_3 IS31FL3733_SYNC_NONE +#endif +#ifndef IS31FL3733_SYNC_4 +# define IS31FL3733_SYNC_4 IS31FL3733_SYNC_NONE +#endif + // Transfer buffer for TWITransmitData() uint8_t g_twi_transfer_buffer[20]; @@ -125,6 +138,24 @@ bool is31fl3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffe return true; } +void is31fl3733_init_drivers(void) { + i2c_init(&I2CD1, I2C1_SCL_PIN, I2C1_SDA_PIN); + is31fl3733_init(0, IS31FL3733_I2C_ADDRESS_1, IS31FL3733_SYNC_1); +# ifdef USE_I2C2 + i2c_init(&I2CD2, I2C2_SCL_PIN, I2C2_SDA_PIN); + is31fl3733_init(1, IS31FL3733_I2C_ADDRESS_2, IS31FL3733_SYNC_2); +# endif + + for (int i = 0; i < IS31FL3733_LED_COUNT; i++) { + is31fl3733_set_led_control_register(i, true, true, true); + } + + is31fl3733_update_led_control_registers(IS31FL3733_I2C_ADDRESS_1, 0); +# ifdef USE_I2C2 + is31fl3733_update_led_control_registers(IS31FL3733_I2C_ADDRESS_2, 1); +# endif +} + void is31fl3733_init(uint8_t bus, uint8_t addr, uint8_t sync) { // In order to avoid the LEDs being driven with garbage data // in the LED driver's PWM registers, shutdown is enabled last. @@ -173,7 +204,7 @@ void is31fl3733_init(uint8_t bus, uint8_t addr, uint8_t sync) { void is31fl3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { is31fl3733_led_t led; - if (index >= 0 && index < RGB_MATRIX_LED_COUNT) { + if (index >= 0 && index < IS31FL3733_LED_COUNT) { memcpy_P(&led, (&g_is31fl3733_leds[index]), sizeof(led)); if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) { @@ -187,7 +218,7 @@ void is31fl3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { } void is31fl3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { - for (int i = 0; i < RGB_MATRIX_LED_COUNT; i++) { + for (int i = 0; i < IS31FL3733_LED_COUNT; i++) { is31fl3733_set_color(i, red, green, blue); } } diff --git a/keyboards/input_club/k_type/is31fl3733-dual.h b/keyboards/input_club/k_type/is31fl3733-dual.h index 33943af320..696c234b67 100644 --- a/keyboards/input_club/k_type/is31fl3733-dual.h +++ b/keyboards/input_club/k_type/is31fl3733-dual.h @@ -46,8 +46,9 @@ typedef struct is31fl3733_led_t { uint8_t b; } __attribute__((packed)) is31fl3733_led_t; -extern const is31fl3733_led_t PROGMEM g_is31fl3733_leds[RGB_MATRIX_LED_COUNT]; +extern const is31fl3733_led_t PROGMEM g_is31fl3733_leds[IS31FL3733_LED_COUNT]; +void is31fl3733_init_drivers(void); void is31fl3733_init(uint8_t bus, uint8_t addr, uint8_t sync); bool is31fl3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data); bool is31fl3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer); @@ -80,6 +81,10 @@ void is31fl3733_flush(void); #define IS31FL3733_PWM_FREQUENCY_2K1_HZ 0x03 #define IS31FL3733_PWM_FREQUENCY_1K05_HZ 0x04 +#define IS31FL3733_SYNC_NONE 0b00 +#define IS31FL3733_SYNC_MASTER 0b01 +#define IS31FL3733_SYNC_SLAVE 0b10 + #define A_1 0x00 #define A_2 0x01 #define A_3 0x02 diff --git a/keyboards/input_club/k_type/k_type-rgbdriver.c b/keyboards/input_club/k_type/k_type-rgbdriver.c index 1e8132e6dc..e4d2d2d04b 100644 --- a/keyboards/input_club/k_type/k_type-rgbdriver.c +++ b/keyboards/input_club/k_type/k_type-rgbdriver.c @@ -16,30 +16,10 @@ #ifdef RGB_MATRIX_ENABLE # include "rgb_matrix.h" -# include "i2c_master.h" # include "is31fl3733-dual.h" -# include "gpio.h" - -static void init(void) { - i2c_init(&I2CD1, I2C1_SCL_PIN, I2C1_SDA_PIN); - is31fl3733_init(0, IS31FL3733_I2C_ADDRESS_1, 0); -# ifdef USE_I2C2 - i2c_init(&I2CD2, I2C2_SCL_PIN, I2C2_SDA_PIN); - is31fl3733_init(1, IS31FL3733_I2C_ADDRESS_2, 0); -# endif - for (int index = 0; index < RGB_MATRIX_LED_COUNT; index++) { - bool enabled = true; - // This only caches it for later - is31fl3733_set_led_control_register(index, enabled, enabled, enabled); - } - is31fl3733_update_led_control_registers(IS31FL3733_I2C_ADDRESS_1, 0); -# ifdef USE_I2C2 - is31fl3733_update_led_control_registers(IS31FL3733_I2C_ADDRESS_2, 1); -# endif -} const rgb_matrix_driver_t rgb_matrix_driver = { - .init = init, + .init = is31fl3733_init_drivers, .flush = is31fl3733_flush, .set_color = is31fl3733_set_color, .set_color_all = is31fl3733_set_color_all, diff --git a/keyboards/input_club/k_type/k_type.c b/keyboards/input_club/k_type/k_type.c index c6d06b51dc..e97007fc70 100644 --- a/keyboards/input_club/k_type/k_type.c +++ b/keyboards/input_club/k_type/k_type.c @@ -20,7 +20,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGB_MATRIX_ENABLE # include "is31fl3733-dual.h" -const is31fl3733_led_t PROGMEM g_is31fl3733_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3733_led_t PROGMEM g_is31fl3733_leds[IS31FL3733_LED_COUNT] = { { 0, B_1, A_1, C_1 }, { 0, B_2, A_2, C_2 }, { 0, B_3, A_3, C_3 }, diff --git a/keyboards/input_club/k_type/post_rules.mk b/keyboards/input_club/k_type/post_rules.mk index 897e422b05..ba750e2624 100644 --- a/keyboards/input_club/k_type/post_rules.mk +++ b/keyboards/input_club/k_type/post_rules.mk @@ -1,5 +1,5 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes) # Additional files for RGB lighting - SRC += k_type-rgbdriver.c - QUANTUM_LIB_SRC += i2c_master.c is31fl3733-dual.c + SRC += k_type-rgbdriver.c is31fl3733-dual.c + QUANTUM_LIB_SRC += i2c_master.c endif diff --git a/keyboards/keebwerk/mega/ansi/config.h b/keyboards/keebwerk/mega/ansi/config.h index ee98c95636..c3b90cc2ca 100755 --- a/keyboards/keebwerk/mega/ansi/config.h +++ b/keyboards/keebwerk/mega/ansi/config.h @@ -53,7 +53,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND #define IS31FL3733_I2C_ADDRESS_2 IS31FL3733_I2C_ADDRESS_GND_SDA #define IS31FL3733_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 128 +#define IS31FL3733_LED_COUNT 128 // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/config.h b/keyboards/kprepublic/bm60hsrgb/rev2/config.h index 9349838622..8d194f5ccb 100644 --- a/keyboards/kprepublic/bm60hsrgb/rev2/config.h +++ b/keyboards/kprepublic/bm60hsrgb/rev2/config.h @@ -74,7 +74,7 @@ #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 -#define ISSI_LED_TOTAL DRIVER_1_LED_TOTAL +#define IS31FL3733_LED_COUNT DRIVER_1_LED_TOTAL // Underglow LEDs are WS2812, but someone might want to use RGBLIGHT for them; // don't use those LEDs in RGB Matrix in that case. @@ -84,7 +84,7 @@ # define WS2812_LED_TOTAL 6 #endif -#define RGB_MATRIX_LED_COUNT (ISSI_LED_TOTAL + WS2812_LED_TOTAL) +#define RGB_MATRIX_LED_COUNT (IS31FL3733_LED_COUNT + WS2812_LED_TOTAL) #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/rev2.c b/keyboards/kprepublic/bm60hsrgb/rev2/rev2.c index 8b786d7cfb..0e9b3d318d 100644 --- a/keyboards/kprepublic/bm60hsrgb/rev2/rev2.c +++ b/keyboards/kprepublic/bm60hsrgb/rev2/rev2.c @@ -22,7 +22,7 @@ # include "is31fl3733.h" # include "ws2812.h" -const is31fl3733_led_t PROGMEM g_is31fl3733_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3733_led_t PROGMEM g_is31fl3733_leds[IS31FL3733_LED_COUNT] = { { 0, B_1, A_1, C_1 }, { 0, B_2, A_2, C_2 }, { 0, B_3, A_3, C_3 }, @@ -153,8 +153,8 @@ rgb_led_t rgb_matrix_ws2812_array[WS2812_LED_TOTAL]; static void rgb_matrix_driver_init(void) { i2c_init(); - is31fl3733_init(IS31FL3733_I2C_ADDRESS_1, 0); - for (uint8_t index = 0; index < ISSI_LED_TOTAL; index++) { + is31fl3733_init(IS31FL3733_I2C_ADDRESS_1, IS31FL3733_SYNC_NONE); + for (uint8_t index = 0; index < IS31FL3733_LED_COUNT; index++) { bool enabled = true; is31fl3733_set_led_control_register(index, enabled, enabled, enabled); } @@ -169,13 +169,13 @@ static void rgb_matrix_driver_flush(void) { } static void rgb_matrix_driver_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { - if (index < ISSI_LED_TOTAL) { + if (index < IS31FL3733_LED_COUNT) { is31fl3733_set_color(index, red, green, blue); } else { # if WS2812_LED_TOTAL > 0 - rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].r = red; - rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].g = green; - rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].b = blue; + rgb_matrix_ws2812_array[index - IS31FL3733_LED_COUNT].r = red; + rgb_matrix_ws2812_array[index - IS31FL3733_LED_COUNT].g = green; + rgb_matrix_ws2812_array[index - IS31FL3733_LED_COUNT].b = blue; # endif } } diff --git a/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h b/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h index acd30f0659..b22c384460 100644 --- a/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h +++ b/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h @@ -82,7 +82,7 @@ // IS31FL3733+WS2812 driver setup used by this board the LED controller drivers // are compiled unconditionally). -#define ISSI_LED_TOTAL DRIVER_1_LED_TOTAL +#define IS31FL3733_LED_COUNT DRIVER_1_LED_TOTAL #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 @@ -94,7 +94,7 @@ # define WS2812_LED_TOTAL 6 #endif -#define RGB_MATRIX_LED_COUNT (ISSI_LED_TOTAL + WS2812_LED_TOTAL) +#define RGB_MATRIX_LED_COUNT (IS31FL3733_LED_COUNT + WS2812_LED_TOTAL) #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/kprepublic/bm60hsrgb_iso/rev2/rev2.c b/keyboards/kprepublic/bm60hsrgb_iso/rev2/rev2.c index 02dd4ab6ce..2cfe18e08e 100644 --- a/keyboards/kprepublic/bm60hsrgb_iso/rev2/rev2.c +++ b/keyboards/kprepublic/bm60hsrgb_iso/rev2/rev2.c @@ -24,7 +24,7 @@ # include "ws2812.h" -const PROGMEM is31fl3733_led_t g_is31fl3733_leds[RGB_MATRIX_LED_COUNT] = { +const PROGMEM is31fl3733_led_t g_is31fl3733_leds[IS31FL3733_LED_COUNT] = { { 0, B_1, A_1, C_1 }, { 0, B_2, A_2, C_2 }, { 0, B_3, A_3, C_3 }, @@ -153,8 +153,8 @@ rgb_led_t rgb_matrix_ws2812_array[WS2812_LED_TOTAL]; static void rgb_matrix_driver_init(void) { i2c_init(); - is31fl3733_init(IS31FL3733_I2C_ADDRESS_1, 0); - for (uint8_t index = 0; index < ISSI_LED_TOTAL; index++) { + is31fl3733_init(IS31FL3733_I2C_ADDRESS_1, IS31FL3733_SYNC_NONE); + for (uint8_t index = 0; index < IS31FL3733_LED_COUNT; index++) { bool enabled = true; is31fl3733_set_led_control_register(index, enabled, enabled, enabled); } @@ -169,13 +169,13 @@ static void rgb_matrix_driver_flush(void) { } static void rgb_matrix_driver_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { - if (index < ISSI_LED_TOTAL) { + if (index < IS31FL3733_LED_COUNT) { is31fl3733_set_color(index, red, green, blue); } else { # if WS2812_LED_TOTAL > 0 - rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].r = red; - rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].g = green; - rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].b = blue; + rgb_matrix_ws2812_array[index - IS31FL3733_LED_COUNT].r = red; + rgb_matrix_ws2812_array[index - IS31FL3733_LED_COUNT].g = green; + rgb_matrix_ws2812_array[index - IS31FL3733_LED_COUNT].b = blue; # endif } } diff --git a/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h b/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h index 7fd7575148..57cb40dc24 100644 --- a/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h +++ b/keyboards/kprepublic/bm60hsrgb_poker/rev2/config.h @@ -81,7 +81,7 @@ #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND #define DRIVER_1_LED_TOTAL 61 -#define ISSI_LED_TOTAL DRIVER_1_LED_TOTAL +#define IS31FL3733_LED_COUNT DRIVER_1_LED_TOTAL // Underglow LEDs are WS2812, but someone might want to use RGBLIGHT for them; // don't use those LEDs in RGB Matrix in that case. @@ -91,7 +91,7 @@ # define WS2812_LED_TOTAL 6 #endif -#define RGB_MATRIX_LED_COUNT (ISSI_LED_TOTAL + WS2812_LED_TOTAL) +#define RGB_MATRIX_LED_COUNT (IS31FL3733_LED_COUNT + WS2812_LED_TOTAL) #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/kprepublic/bm60hsrgb_poker/rev2/rev2.c b/keyboards/kprepublic/bm60hsrgb_poker/rev2/rev2.c index f76c45e6c5..2e66a3096e 100644 --- a/keyboards/kprepublic/bm60hsrgb_poker/rev2/rev2.c +++ b/keyboards/kprepublic/bm60hsrgb_poker/rev2/rev2.c @@ -21,7 +21,7 @@ # include "is31fl3733.h" # include "ws2812.h" -const is31fl3733_led_t PROGMEM g_is31fl3733_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3733_led_t PROGMEM g_is31fl3733_leds[IS31FL3733_LED_COUNT] = { { 0, B_1, A_1, C_1 }, { 0, B_2, A_2, C_2 }, { 0, B_3, A_3, C_3 }, @@ -149,8 +149,8 @@ rgb_led_t rgb_matrix_ws2812_array[WS2812_LED_TOTAL]; static void rgb_matrix_driver_init(void) { i2c_init(); - is31fl3733_init(IS31FL3733_I2C_ADDRESS_1, 0); - for (uint8_t index = 0; index < ISSI_LED_TOTAL; index++) { + is31fl3733_init(IS31FL3733_I2C_ADDRESS_1, IS31FL3733_SYNC_NONE); + for (uint8_t index = 0; index < IS31FL3733_LED_COUNT; index++) { bool enabled = true; is31fl3733_set_led_control_register(index, enabled, enabled, enabled); } @@ -165,13 +165,13 @@ static void rgb_matrix_driver_flush(void) { } static void rgb_matrix_driver_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { - if (index < ISSI_LED_TOTAL) { + if (index < IS31FL3733_LED_COUNT) { is31fl3733_set_color(index, red, green, blue); } else { # if WS2812_LED_TOTAL > 0 - rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].r = red; - rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].g = green; - rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].b = blue; + rgb_matrix_ws2812_array[index - IS31FL3733_LED_COUNT].r = red; + rgb_matrix_ws2812_array[index - IS31FL3733_LED_COUNT].g = green; + rgb_matrix_ws2812_array[index - IS31FL3733_LED_COUNT].b = blue; # endif } } diff --git a/keyboards/matrix/m20add/config.h b/keyboards/matrix/m20add/config.h index aba2357357..51b050ca7c 100644 --- a/keyboards/matrix/m20add/config.h +++ b/keyboards/matrix/m20add/config.h @@ -80,4 +80,4 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_DRIVER_COUNT 1 -#define RGB_MATRIX_LED_COUNT 20 +#define IS31FL3731_LED_COUNT 20 diff --git a/keyboards/matrix/m20add/rgb_ring.c b/keyboards/matrix/m20add/rgb_ring.c index 553a3d5360..f3fbe83d72 100644 --- a/keyboards/matrix/m20add/rgb_ring.c +++ b/keyboards/matrix/m20add/rgb_ring.c @@ -30,7 +30,7 @@ #endif // rgb ring leds setting -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -371,13 +371,7 @@ void rgblight_call_driver(rgb_led_t *start_led, uint8_t num_leds) void rgb_ring_init(void) { - i2c_init(); - is31fl3731_init(IS31FL3731_I2C_ADDRESS_1); - for (int index = 0; index < RGB_MATRIX_LED_COUNT; index++) { - bool enabled = true; - is31fl3731_set_led_control_register(index, enabled, enabled, enabled); - } - is31fl3731_update_led_control_registers(IS31FL3731_I2C_ADDRESS_1, 0); + is31fl3731_init_drivers(); } void rgb_ring_task(void) diff --git a/keyboards/neson_design/700e/700e.c b/keyboards/neson_design/700e/700e.c index d4aa336edb..9def73d6a4 100644 --- a/keyboards/neson_design/700e/700e.c +++ b/keyboards/neson_design/700e/700e.c @@ -111,7 +111,7 @@ static void self_testing(void) } if (rgb_state.index >= ST_LEFT_END) { - for (int i = rgb_state.index - 1; i < RGB_MATRIX_LED_COUNT - rgb_state.index + 1; i++) { + for (int i = rgb_state.index - 1; i < IS31FL3731_LED_COUNT - rgb_state.index + 1; i++) { is31fl3731_set_color(i, led.r, led.g, led.b); } if (rgb_state.index == ST_LEFT_END) { @@ -173,13 +173,13 @@ static void self_testing(void) } break; case ST_STAGE_3: - if (rgb_state.index != RGB_MATRIX_LED_COUNT/2) { + if (rgb_state.index != IS31FL3731_LED_COUNT/2) { is31fl3731_set_color_all(0, 0, 0); } // light left and right - if (rgb_state.index == RGB_MATRIX_LED_COUNT/2) { + if (rgb_state.index == IS31FL3731_LED_COUNT/2) { if (rgb_state.duration) { rgb_state.duration--; } else { @@ -207,7 +207,7 @@ static void self_testing(void) update_ticks(); } -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -294,18 +294,8 @@ void matrix_init_kb(void) setPinOutput(LED_CAPS_LOCK_PIN); writePinLow(LED_CAPS_LOCK_PIN); - i2c_init(); - is31fl3731_init(IS31FL3731_I2C_ADDRESS_1); -#ifdef IS31FL3731_I2C_ADDRESS_2 - is31fl3731_init(IS31FL3731_I2C_ADDRESS_2); -#endif - for (int index = 0; index < RGB_MATRIX_LED_COUNT; index++) { - is31fl3731_set_led_control_register(index, true, true, true); - } - is31fl3731_update_led_control_registers(IS31FL3731_I2C_ADDRESS_1, 0); -#ifdef IS31FL3731_I2C_ADDRESS_2 - is31fl3731_update_led_control_registers(IS31FL3731_I2C_ADDRESS_2, 1); -#endif + is31fl3731_init_drivers(); + update_ticks(); matrix_init_user(); } @@ -350,16 +340,16 @@ void rgblight_call_driver(rgb_led_t *start_led, uint8_t num_leds) { if (rgb_state.state != NORMAL) return; - for (uint8_t i = 0; i < RGB_MATRIX_LED_COUNT; i++) { + for (uint8_t i = 0; i < IS31FL3731_LED_COUNT; i++) { is31fl3731_set_color(i, start_led[i].r, start_led[i].g, start_led[i].b); } rgb_led_t leds[4]; for (int i = 0; i < 4; i++) { - leds[i].r = start_led[RGB_MATRIX_LED_COUNT+i].g; - leds[i].g = start_led[RGB_MATRIX_LED_COUNT+i].r; - leds[i].b = start_led[RGB_MATRIX_LED_COUNT+i].b; + leds[i].r = start_led[IS31FL3731_LED_COUNT+i].g; + leds[i].g = start_led[IS31FL3731_LED_COUNT+i].r; + leds[i].b = start_led[IS31FL3731_LED_COUNT+i].b; } - //ws2812_setleds(start_led+RGB_MATRIX_LED_COUNT, 4); + //ws2812_setleds(start_led+IS31FL3731_LED_COUNT, 4); ws2812_setleds(leds, 4); } diff --git a/keyboards/neson_design/700e/config.h b/keyboards/neson_design/700e/config.h index bd1d9888ec..4cecb6165a 100644 --- a/keyboards/neson_design/700e/config.h +++ b/keyboards/neson_design/700e/config.h @@ -35,6 +35,6 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_VCC #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL+DRIVER_2_LED_TOTAL) +#define IS31FL3731_LED_COUNT (DRIVER_1_LED_TOTAL+DRIVER_2_LED_TOTAL) #define USB_SUSPEND_WAKEUP_DELAY 1000 diff --git a/keyboards/neson_design/n6/config.h b/keyboards/neson_design/n6/config.h index 22a25a0d92..847b26eb25 100644 --- a/keyboards/neson_design/n6/config.h +++ b/keyboards/neson_design/n6/config.h @@ -35,4 +35,4 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_VCC #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL+DRIVER_2_LED_TOTAL) +#define IS31FL3731_LED_COUNT (DRIVER_1_LED_TOTAL+DRIVER_2_LED_TOTAL) diff --git a/keyboards/neson_design/n6/n6.c b/keyboards/neson_design/n6/n6.c index 5f3ae3a169..38b634eeb7 100644 --- a/keyboards/neson_design/n6/n6.c +++ b/keyboards/neson_design/n6/n6.c @@ -115,7 +115,7 @@ static void self_testing(void) } if (rgb_state.index >= ST_LEFT_END) { - for (int i = rgb_state.index - 1; i < RGB_MATRIX_LED_COUNT - rgb_state.index + 1; i++) { + for (int i = rgb_state.index - 1; i < IS31FL3731_LED_COUNT - rgb_state.index + 1; i++) { is31fl3731_set_color(i, led.r, led.g, led.b); } if (rgb_state.index == ST_LEFT_END) { @@ -177,13 +177,13 @@ static void self_testing(void) } break; case ST_STAGE_3: - if (rgb_state.index != RGB_MATRIX_LED_COUNT/2) { + if (rgb_state.index != IS31FL3731_LED_COUNT/2) { is31fl3731_set_color_all(0, 0, 0); } // light left and right - if (rgb_state.index == RGB_MATRIX_LED_COUNT/2) { + if (rgb_state.index == IS31FL3731_LED_COUNT/2) { if (rgb_state.duration) { rgb_state.duration--; } else { @@ -211,7 +211,7 @@ static void self_testing(void) update_ticks(); } -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -298,18 +298,8 @@ void matrix_init_kb(void) setPinOutput(LED_CAPS_LOCK_PIN); writePinLow(LED_CAPS_LOCK_PIN); - i2c_init(); - is31fl3731_init(IS31FL3731_I2C_ADDRESS_1); -#ifdef IS31FL3731_I2C_ADDRESS_2 - is31fl3731_init(IS31FL3731_I2C_ADDRESS_2); -#endif - for (int index = 0; index < RGB_MATRIX_LED_COUNT; index++) { - is31fl3731_set_led_control_register(index, true, true, true); - } - is31fl3731_update_led_control_registers(IS31FL3731_I2C_ADDRESS_1, 0); -#ifdef IS31FL3731_I2C_ADDRESS_2 - is31fl3731_update_led_control_registers(IS31FL3731_I2C_ADDRESS_2, 1); -#endif + is31fl3731_init_drivers(); + update_ticks(); matrix_init_user(); } @@ -352,10 +342,10 @@ void rgblight_call_driver(rgb_led_t *start_led, uint8_t num_leds) { if (rgb_state.state != NORMAL) return; - for (uint8_t i = 0; i < RGB_MATRIX_LED_COUNT; i++) { + for (uint8_t i = 0; i < IS31FL3731_LED_COUNT; i++) { is31fl3731_set_color(i, start_led[i].r, start_led[i].g, start_led[i].b); } - ws2812_setleds(start_led+RGB_MATRIX_LED_COUNT, 1); + ws2812_setleds(start_led+IS31FL3731_LED_COUNT, 1); } bool led_update_kb(led_t led_state) diff --git a/keyboards/novelkeys/nk65/config.h b/keyboards/novelkeys/nk65/config.h index 4dc1ab9165..bbba5cd7d8 100755 --- a/keyboards/novelkeys/nk65/config.h +++ b/keyboards/novelkeys/nk65/config.h @@ -53,7 +53,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND #define IS31FL3733_I2C_ADDRESS_2 IS31FL3733_I2C_ADDRESS_GND_SDA #define IS31FL3733_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 128 +#define IS31FL3733_LED_COUNT 128 // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for diff --git a/keyboards/novelkeys/nk87/config.h b/keyboards/novelkeys/nk87/config.h index 3b3e9309c1..41ecb8a8e3 100755 --- a/keyboards/novelkeys/nk87/config.h +++ b/keyboards/novelkeys/nk87/config.h @@ -53,7 +53,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND #define IS31FL3733_I2C_ADDRESS_2 IS31FL3733_I2C_ADDRESS_GND_SDA #define IS31FL3733_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 128 +#define IS31FL3733_LED_COUNT 128 // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for diff --git a/keyboards/spaceholdings/nebula12/config.h b/keyboards/spaceholdings/nebula12/config.h index 5e4b48927f..512b775136 100755 --- a/keyboards/spaceholdings/nebula12/config.h +++ b/keyboards/spaceholdings/nebula12/config.h @@ -75,7 +75,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_DRIVER_COUNT 1 -#define RGB_MATRIX_LED_COUNT 16 +#define IS31FL3731_LED_COUNT 16 // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for diff --git a/keyboards/spaceholdings/nebula68/config.h b/keyboards/spaceholdings/nebula68/config.h index 0283a4a036..1ad24d364c 100755 --- a/keyboards/spaceholdings/nebula68/config.h +++ b/keyboards/spaceholdings/nebula68/config.h @@ -59,7 +59,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND #define IS31FL3733_I2C_ADDRESS_2 IS31FL3733_I2C_ADDRESS_GND_SDA #define IS31FL3733_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 128 +#define IS31FL3733_LED_COUNT 128 // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for diff --git a/keyboards/tkc/portico/config.h b/keyboards/tkc/portico/config.h index 5599f2a36b..2a1056b4a5 100644 --- a/keyboards/tkc/portico/config.h +++ b/keyboards/tkc/portico/config.h @@ -51,7 +51,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_VCC #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 67 +#define IS31FL3731_LED_COUNT 67 #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/tkc/portico/portico.c b/keyboards/tkc/portico/portico.c index bbb09ef8f6..72f8754f6c 100644 --- a/keyboards/tkc/portico/portico.c +++ b/keyboards/tkc/portico/portico.c @@ -19,7 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGB_MATRIX_ENABLE -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { { 0, C2_1, C3_1, C4_1 }, { 0, C1_1, C3_2, C4_2 }, { 0, C1_2, C2_2, C4_3 }, diff --git a/keyboards/tkc/portico75/config.h b/keyboards/tkc/portico75/config.h index 756dfbb54a..3a9b50baca 100644 --- a/keyboards/tkc/portico75/config.h +++ b/keyboards/tkc/portico75/config.h @@ -81,7 +81,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // WT_RGB IS31FL3741 driver code # define IS31FL3741_I2C_ADDRESS_1 IS31FL3741_I2C_ADDRESS_GND # define IS31FL3741_DRIVER_COUNT 1 -# define RGB_MATRIX_LED_COUNT 98 +# define IS31FL3741_LED_COUNT 98 # define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/tkc/portico75/portico75.c b/keyboards/tkc/portico75/portico75.c index 69d6256071..f0751483aa 100644 --- a/keyboards/tkc/portico75/portico75.c +++ b/keyboards/tkc/portico75/portico75.c @@ -20,7 +20,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGB_MATRIX_ENABLE -const is31fl3741_led_t PROGMEM g_is31fl3741_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3741_led_t PROGMEM g_is31fl3741_leds[IS31FL3741_LED_COUNT] = { {0, CS18_SW1, CS17_SW1, CS16_SW1}, {0, CS18_SW2, CS17_SW2, CS16_SW2}, {0, CS18_SW3, CS17_SW3, CS16_SW3}, diff --git a/keyboards/wilba_tech/rama_works_kara/config.h b/keyboards/wilba_tech/rama_works_kara/config.h index 5d8c9df820..09aac7a552 100644 --- a/keyboards/wilba_tech/rama_works_kara/config.h +++ b/keyboards/wilba_tech/rama_works_kara/config.h @@ -19,7 +19,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 72 +#define IS31FL3731_LED_COUNT 72 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wilba_tech/rama_works_koyu/config.h b/keyboards/wilba_tech/rama_works_koyu/config.h index aad4cd12ac..512cff857b 100644 --- a/keyboards/wilba_tech/rama_works_koyu/config.h +++ b/keyboards/wilba_tech/rama_works_koyu/config.h @@ -19,7 +19,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 72 +#define IS31FL3731_LED_COUNT 72 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wilba_tech/rama_works_m10_c/config.h b/keyboards/wilba_tech/rama_works_m10_c/config.h index 529896f6ed..1e0d943b96 100644 --- a/keyboards/wilba_tech/rama_works_m10_c/config.h +++ b/keyboards/wilba_tech/rama_works_m10_c/config.h @@ -23,7 +23,7 @@ // IS31FL3731 driver #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_DRIVER_COUNT 1 -#define RGB_MATRIX_LED_COUNT 12 +#define IS31FL3731_LED_COUNT 12 // Enable WT RGB backlight #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/wilba_tech/rama_works_m50_a/config.h b/keyboards/wilba_tech/rama_works_m50_a/config.h index 599550b91f..98149ffa14 100644 --- a/keyboards/wilba_tech/rama_works_m50_a/config.h +++ b/keyboards/wilba_tech/rama_works_m50_a/config.h @@ -24,7 +24,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 72 +#define IS31FL3731_LED_COUNT 72 // Enable WT RGB backlight #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/wilba_tech/rama_works_m60_a/config.h b/keyboards/wilba_tech/rama_works_m60_a/config.h index bc7d7e6128..c291ba2db3 100644 --- a/keyboards/wilba_tech/rama_works_m60_a/config.h +++ b/keyboards/wilba_tech/rama_works_m60_a/config.h @@ -19,7 +19,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 72 +#define IS31FL3731_LED_COUNT 72 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wilba_tech/rama_works_m65_b/config.h b/keyboards/wilba_tech/rama_works_m65_b/config.h index b3e381d77d..9807fbc874 100644 --- a/keyboards/wilba_tech/rama_works_m65_b/config.h +++ b/keyboards/wilba_tech/rama_works_m65_b/config.h @@ -24,7 +24,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 72 +#define IS31FL3731_LED_COUNT 72 // Enable WT RGB backlight #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/wilba_tech/rama_works_m65_bx/config.h b/keyboards/wilba_tech/rama_works_m65_bx/config.h index 8070e917d7..64da89ff9e 100644 --- a/keyboards/wilba_tech/rama_works_m65_bx/config.h +++ b/keyboards/wilba_tech/rama_works_m65_bx/config.h @@ -24,7 +24,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 72 +#define IS31FL3731_LED_COUNT 72 // Enable WT RGB backlight #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/wilba_tech/rama_works_m6_b/config.h b/keyboards/wilba_tech/rama_works_m6_b/config.h index 27a5e72c04..112cd500be 100644 --- a/keyboards/wilba_tech/rama_works_m6_b/config.h +++ b/keyboards/wilba_tech/rama_works_m6_b/config.h @@ -20,7 +20,7 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define RGB_MATRIX_LED_COUNT 6 +#define IS31FL3218_LED_COUNT 6 #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/wilba_tech/rama_works_u80_a/config.h b/keyboards/wilba_tech/rama_works_u80_a/config.h index 4ab2d53c3c..2a0da80fed 100644 --- a/keyboards/wilba_tech/rama_works_u80_a/config.h +++ b/keyboards/wilba_tech/rama_works_u80_a/config.h @@ -42,7 +42,7 @@ #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_I2C_ADDRESS_3 IS31FL3731_I2C_ADDRESS_SCL #define IS31FL3731_DRIVER_COUNT 3 -#define RGB_MATRIX_LED_COUNT 108 +#define IS31FL3731_LED_COUNT 108 #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/wilba_tech/wt60_a/config.h b/keyboards/wilba_tech/wt60_a/config.h index c9d448fbb8..25a6f25a1c 100644 --- a/keyboards/wilba_tech/wt60_a/config.h +++ b/keyboards/wilba_tech/wt60_a/config.h @@ -64,4 +64,4 @@ #define IS31FL3736_I2C_ADDRESS_1 IS31FL3736_I2C_ADDRESS_GND_GND #define IS31FL3736_DRIVER_COUNT 1 -#define LED_MATRIX_LED_COUNT 96 +#define IS31FL3736_LED_COUNT 96 diff --git a/keyboards/wilba_tech/wt60_b/config.h b/keyboards/wilba_tech/wt60_b/config.h index c5fb1b32c7..926136f332 100644 --- a/keyboards/wilba_tech/wt60_b/config.h +++ b/keyboards/wilba_tech/wt60_b/config.h @@ -26,7 +26,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 72 +#define IS31FL3731_LED_COUNT 72 #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/wilba_tech/wt60_bx/config.h b/keyboards/wilba_tech/wt60_bx/config.h index f87d9ff48e..85ab052437 100644 --- a/keyboards/wilba_tech/wt60_bx/config.h +++ b/keyboards/wilba_tech/wt60_bx/config.h @@ -26,7 +26,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 72 +#define IS31FL3731_LED_COUNT 72 #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/wilba_tech/wt60_c/config.h b/keyboards/wilba_tech/wt60_c/config.h index 4a1b8b6ad2..ca7366bc32 100644 --- a/keyboards/wilba_tech/wt60_c/config.h +++ b/keyboards/wilba_tech/wt60_c/config.h @@ -26,7 +26,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 72 +#define IS31FL3731_LED_COUNT 72 #define RGB_BACKLIGHT_ENABLED 1 diff --git a/keyboards/wilba_tech/wt65_a/config.h b/keyboards/wilba_tech/wt65_a/config.h index 04d607e77a..88f28ac844 100644 --- a/keyboards/wilba_tech/wt65_a/config.h +++ b/keyboards/wilba_tech/wt65_a/config.h @@ -64,4 +64,4 @@ #define IS31FL3736_I2C_ADDRESS_1 IS31FL3736_I2C_ADDRESS_GND_GND #define IS31FL3736_DRIVER_COUNT 1 -#define LED_MATRIX_LED_COUNT 96 +#define IS31FL3736_LED_COUNT 96 diff --git a/keyboards/wilba_tech/wt65_b/config.h b/keyboards/wilba_tech/wt65_b/config.h index 780b3c80c4..164caecd00 100644 --- a/keyboards/wilba_tech/wt65_b/config.h +++ b/keyboards/wilba_tech/wt65_b/config.h @@ -64,4 +64,4 @@ #define IS31FL3736_I2C_ADDRESS_1 IS31FL3736_I2C_ADDRESS_GND_GND #define IS31FL3736_DRIVER_COUNT 1 -#define LED_MATRIX_LED_COUNT 96 +#define IS31FL3736_LED_COUNT 96 diff --git a/keyboards/wilba_tech/wt75_a/config.h b/keyboards/wilba_tech/wt75_a/config.h index 29399e148a..a8185a6807 100644 --- a/keyboards/wilba_tech/wt75_a/config.h +++ b/keyboards/wilba_tech/wt75_a/config.h @@ -64,4 +64,4 @@ #define IS31FL3736_I2C_ADDRESS_1 IS31FL3736_I2C_ADDRESS_GND_GND #define IS31FL3736_DRIVER_COUNT 1 -#define LED_MATRIX_LED_COUNT 96 +#define IS31FL3736_LED_COUNT 96 diff --git a/keyboards/wilba_tech/wt75_b/config.h b/keyboards/wilba_tech/wt75_b/config.h index 71ca6891ca..4834251691 100644 --- a/keyboards/wilba_tech/wt75_b/config.h +++ b/keyboards/wilba_tech/wt75_b/config.h @@ -64,4 +64,4 @@ #define IS31FL3736_I2C_ADDRESS_1 IS31FL3736_I2C_ADDRESS_GND_GND #define IS31FL3736_DRIVER_COUNT 1 -#define LED_MATRIX_LED_COUNT 96 +#define IS31FL3736_LED_COUNT 96 diff --git a/keyboards/wilba_tech/wt75_c/config.h b/keyboards/wilba_tech/wt75_c/config.h index b404dccfbb..d1e81992f5 100644 --- a/keyboards/wilba_tech/wt75_c/config.h +++ b/keyboards/wilba_tech/wt75_c/config.h @@ -64,4 +64,4 @@ #define IS31FL3736_I2C_ADDRESS_1 IS31FL3736_I2C_ADDRESS_GND_GND #define IS31FL3736_DRIVER_COUNT 1 -#define LED_MATRIX_LED_COUNT 96 +#define IS31FL3736_LED_COUNT 96 diff --git a/keyboards/wilba_tech/wt80_a/config.h b/keyboards/wilba_tech/wt80_a/config.h index a1f8fbdef6..c6594c1689 100644 --- a/keyboards/wilba_tech/wt80_a/config.h +++ b/keyboards/wilba_tech/wt80_a/config.h @@ -64,4 +64,4 @@ #define IS31FL3736_I2C_ADDRESS_1 IS31FL3736_I2C_ADDRESS_GND_GND #define IS31FL3736_DRIVER_COUNT 1 -#define LED_MATRIX_LED_COUNT 96 +#define IS31FL3736_LED_COUNT 96 diff --git a/keyboards/wilba_tech/wt_mono_backlight.c b/keyboards/wilba_tech/wt_mono_backlight.c index 4add18b14e..e218f0af4b 100644 --- a/keyboards/wilba_tech/wt_mono_backlight.c +++ b/keyboards/wilba_tech/wt_mono_backlight.c @@ -50,7 +50,7 @@ backlight_config g_config = { .color_1 = MONO_BACKLIGHT_COLOR_1, }; -const is31fl3736_led_t PROGMEM g_is31fl3736_leds[LED_MATRIX_LED_COUNT] = { +const is31fl3736_led_t PROGMEM g_is31fl3736_leds[IS31FL3736_LED_COUNT] = { {0, A_1}, {0, A_2}, {0, A_3}, @@ -170,14 +170,7 @@ uint32_t g_any_key_hit = 0; void backlight_init_drivers(void) { - // Initialize I2C - i2c_init(); - is31fl3736_init( IS31FL3736_I2C_ADDRESS_1 ); - - for ( uint8_t index = 0; index < 96; index++ ) { - is31fl3736_set_led_control_register( index, true ); - } - is31fl3736_update_led_control_registers( IS31FL3736_I2C_ADDRESS_1, 0 ); + is31fl3736_init_drivers(); } void backlight_set_key_hit(uint8_t row, uint8_t column) diff --git a/keyboards/wilba_tech/wt_rgb_backlight.c b/keyboards/wilba_tech/wt_rgb_backlight.c index 1c865deecf..8bd04c840f 100644 --- a/keyboards/wilba_tech/wt_rgb_backlight.c +++ b/keyboards/wilba_tech/wt_rgb_backlight.c @@ -157,7 +157,7 @@ uint32_t g_any_key_hit = 0; #if defined(RGB_BACKLIGHT_HS60) #define ISSI_ADDR_1 IS31FL3733_I2C_ADDRESS_GND_GND -const is31fl3733_led_t PROGMEM g_is31fl3733_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3733_led_t PROGMEM g_is31fl3733_leds[IS31FL3733_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -234,7 +234,7 @@ const is31fl3733_led_t PROGMEM g_is31fl3733_leds[RGB_MATRIX_LED_COUNT] = { #define ISSI_ADDR_1 IS31FL3733_I2C_ADDRESS_GND_GND #define ISSI_ADDR_2 IS31FL3733_I2C_ADDRESS_GND_SDA -const is31fl3733_led_t PROGMEM g_is31fl3733_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3733_led_t PROGMEM g_is31fl3733_leds[IS31FL3733_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -375,7 +375,7 @@ const is31fl3733_led_t PROGMEM g_is31fl3733_leds[RGB_MATRIX_LED_COUNT] = { #elif defined(RGB_BACKLIGHT_NEBULA12) #define ISSI_ADDR_1 IS31FL3731_I2C_ADDRESS_GND -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -406,7 +406,7 @@ const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { #define ISSI_ADDR_2 IS31FL3731_I2C_ADDRESS_SDA #define ISSI_ADDR_3 IS31FL3731_I2C_ADDRESS_SCL -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -531,7 +531,7 @@ const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { #define ISSI_ADDR_1 IS31FL3731_I2C_ADDRESS_GND #define ISSI_ADDR_2 IS31FL3731_I2C_ADDRESS_SDA -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -610,7 +610,7 @@ const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { #define ISSI_ADDR_1 IS31FL3731_I2C_ADDRESS_GND #define ISSI_ADDR_2 IS31FL3731_I2C_ADDRESS_VCC -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -694,7 +694,7 @@ const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { #define ISSI_ADDR_1 IS31FL3741_I2C_ADDRESS_GND #define ISSI_ADDR_2 -const is31fl3741_led_t PROGMEM g_is31fl3741_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3741_led_t PROGMEM g_is31fl3741_leds[IS31FL3741_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -817,7 +817,7 @@ const is31fl3741_led_t PROGMEM g_is31fl3741_leds[RGB_MATRIX_LED_COUNT] = { }; #elif defined(RGB_BACKLIGHT_M6_B) -const is31fl3218_led_t PROGMEM g_is31fl3218_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3218_led_t PROGMEM g_is31fl3218_leds[IS31FL3218_LED_COUNT] = { {OUT1, OUT2, OUT3}, {OUT4, OUT5, OUT6}, {OUT7, OUT8, OUT9}, @@ -829,7 +829,7 @@ const is31fl3218_led_t PROGMEM g_is31fl3218_leds[RGB_MATRIX_LED_COUNT] = { #define ISSI_ADDR_1 IS31FL3731_I2C_ADDRESS_GND #define ISSI_ADDR_2 -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { {0, C1_9, C3_10, C4_10}, // LB1 {0, C1_10, C2_10, C4_11}, // LB2 {0, C1_11, C2_11, C3_11}, // LB3 @@ -847,7 +847,7 @@ const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { #define ISSI_ADDR_1 IS31FL3731_I2C_ADDRESS_GND #define ISSI_ADDR_2 IS31FL3731_I2C_ADDRESS_SDA -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -1817,12 +1817,12 @@ void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) is31fl3733_set_color( index, red, green, blue ); } #elif defined(RGB_BACKLIGHT_DAWN60) - if( index < RGB_MATRIX_LED_COUNT ) { + if( index < IS31FL3731_LED_COUNT ) { is31fl3731_set_color( index, red, green, blue ); } else { - g_ws2812_leds[index - RGB_MATRIX_LED_COUNT].r = red; - g_ws2812_leds[index - RGB_MATRIX_LED_COUNT].g = green; - g_ws2812_leds[index - RGB_MATRIX_LED_COUNT].b = blue; + g_ws2812_leds[index - IS31FL3731_LED_COUNT].r = red; + g_ws2812_leds[index - IS31FL3731_LED_COUNT].g = green; + g_ws2812_leds[index - IS31FL3731_LED_COUNT].b = blue; ws2812_setleds(g_ws2812_leds, WS2812_LED_TOTAL); } #else @@ -2111,9 +2111,9 @@ void backlight_effect_alphas_mods(void) for (int i = 0; i < WS2812_LED_TOTAL; i++) { if ((RGB_UNDERGLOW_ALPHA_TOP_START <= i && i <= RGB_UNDERGLOW_ALPHA_TOP_END) || (RGB_UNDERGLOW_ALPHA_BOT_START <= i && i <= RGB_UNDERGLOW_ALPHA_BOT_END)) { - backlight_set_color(i + RGB_MATRIX_LED_COUNT, rgb1.r, rgb1.g, rgb1.b); + backlight_set_color(i + IS31FL3731_LED_COUNT, rgb1.r, rgb1.g, rgb1.b); } else { - backlight_set_color(i + RGB_MATRIX_LED_COUNT, rgb2.r, rgb2.g, rgb2.b); + backlight_set_color(i + IS31FL3731_LED_COUNT, rgb2.r, rgb2.g, rgb2.b); } } #endif @@ -2902,7 +2902,7 @@ void backlight_init_drivers(void) #if defined(RGB_BACKLIGHT_M6_B) is31fl3218_init(); - for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) + for ( int index = 0; index < IS31FL3218_LED_COUNT; index++ ) { bool enabled = true; @@ -2913,9 +2913,9 @@ void backlight_init_drivers(void) // This actually updates the LED drivers is31fl3218_update_led_control_registers(); #elif defined(RGB_BACKLIGHT_HS60) - is31fl3733_init( ISSI_ADDR_1, 0 ); + is31fl3733_init( ISSI_ADDR_1, IS31FL3733_SYNC_NONE ); - for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) + for ( int index = 0; index < IS31FL3733_LED_COUNT; index++ ) { #if defined(HS60_ANSI) bool enabled = !( ( index == 48-1 ) || //LA48 @@ -2934,10 +2934,10 @@ void backlight_init_drivers(void) // This actually updates the LED drivers is31fl3733_update_led_control_registers( ISSI_ADDR_1, 0 ); #elif defined(RGB_BACKLIGHT_NK65) - is31fl3733_init( ISSI_ADDR_1, 0 ); - is31fl3733_init( ISSI_ADDR_2, 0 ); + is31fl3733_init( ISSI_ADDR_1, IS31FL3733_SYNC_NONE ); + is31fl3733_init( ISSI_ADDR_2, IS31FL3733_SYNC_NONE ); - for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) + for ( int index = 0; index < IS31FL3733_LED_COUNT; index++ ) { bool enabled = !( ( index == 61-1 ) || //LA61 ( index > 6+64-1 ) ); //LB7-LB64 @@ -2949,10 +2949,10 @@ void backlight_init_drivers(void) is31fl3733_update_led_control_registers( ISSI_ADDR_1, 0 ); is31fl3733_update_led_control_registers( ISSI_ADDR_2, 1 ); #elif defined(RGB_BACKLIGHT_NK87) - is31fl3733_init( ISSI_ADDR_1, 0 ); - is31fl3733_init( ISSI_ADDR_2, 0 ); + is31fl3733_init( ISSI_ADDR_1, IS31FL3733_SYNC_NONE ); + is31fl3733_init( ISSI_ADDR_2, IS31FL3733_SYNC_NONE ); - for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) + for ( int index = 0; index < IS31FL3733_LED_COUNT; index++ ) { bool enabled = !( ( index == 61-1 ) || //LA61 ( (index >= 2+64-1) && (index <= 4+64-1) ) || @@ -2979,10 +2979,10 @@ void backlight_init_drivers(void) is31fl3733_update_led_control_registers( ISSI_ADDR_1, 0 ); is31fl3733_update_led_control_registers( ISSI_ADDR_2, 1 ); #elif defined(RGB_BACKLIGHT_NEBULA68) - is31fl3733_init( ISSI_ADDR_1, 0 ); - is31fl3733_init( ISSI_ADDR_2, 0 ); + is31fl3733_init( ISSI_ADDR_1, IS31FL3733_SYNC_NONE ); + is31fl3733_init( ISSI_ADDR_2, IS31FL3733_SYNC_NONE ); - for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) + for ( int index = 0; index < IS31FL3733_LED_COUNT; index++ ) { bool enabled = !( ( index == 61-1 ) || //LA61 ( index > 5+64-1 ) ); //LB6-LB64 @@ -2995,17 +2995,17 @@ void backlight_init_drivers(void) #elif defined(RGB_BACKLIGHT_PORTICO75) is31fl3741_init( ISSI_ADDR_1 ); bool enabled = true; - for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) + for ( int index = 0; index < IS31FL3741_LED_COUNT; index++ ) { is31fl3741_set_led_control_register( index, enabled, enabled, enabled ); } // This actually updates the LED drivers is31fl3741_update_led_control_registers( ISSI_ADDR_1, 0 ); #elif defined(RGB_BACKLIGHT_KW_MEGA) - is31fl3733_init( ISSI_ADDR_1, 0 ); - is31fl3733_init( ISSI_ADDR_2, 0 ); + is31fl3733_init( ISSI_ADDR_1, IS31FL3733_SYNC_NONE ); + is31fl3733_init( ISSI_ADDR_2, IS31FL3733_SYNC_NONE ); - for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) + for ( int index = 0; index < IS31FL3733_LED_COUNT; index++ ) { bool enabled = !( ( index == 61-1 ) || //LA61 ( index > 6+64-1 ) ); //LB7-LB64 @@ -3032,7 +3032,7 @@ void backlight_init_drivers(void) bool disable_spacebar_stab_leds = false; #endif - for ( int index = 0; index < RGB_MATRIX_LED_COUNT; index++ ) + for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ ) { // OR the possible "disabled" cases together, then NOT the result to get the enabled state // LC6 LD13 not present on Zeal65 diff --git a/keyboards/wilba_tech/zeal60/config.h b/keyboards/wilba_tech/zeal60/config.h index 3233c6187d..830dd6d78a 100644 --- a/keyboards/wilba_tech/zeal60/config.h +++ b/keyboards/wilba_tech/zeal60/config.h @@ -19,7 +19,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 72 +#define IS31FL3731_LED_COUNT 72 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/wilba_tech/zeal65/config.h b/keyboards/wilba_tech/zeal65/config.h index 1046ee8108..a7d1b81f84 100644 --- a/keyboards/wilba_tech/zeal65/config.h +++ b/keyboards/wilba_tech/zeal65/config.h @@ -19,7 +19,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 72 +#define IS31FL3731_LED_COUNT 72 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/xelus/dawn60/rev1/config.h b/keyboards/xelus/dawn60/rev1/config.h index c7945df3d6..a2a127f0a4 100644 --- a/keyboards/xelus/dawn60/rev1/config.h +++ b/keyboards/xelus/dawn60/rev1/config.h @@ -19,7 +19,7 @@ #define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND #define IS31FL3731_I2C_ADDRESS_2 IS31FL3731_I2C_ADDRESS_SDA #define IS31FL3731_DRIVER_COUNT 2 -#define RGB_MATRIX_LED_COUNT 64 +#define IS31FL3731_LED_COUNT 64 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/xelus/dawn60/rev1_qmk/config.h b/keyboards/xelus/dawn60/rev1_qmk/config.h index 33629a8ef3..e0ffe30843 100644 --- a/keyboards/xelus/dawn60/rev1_qmk/config.h +++ b/keyboards/xelus/dawn60/rev1_qmk/config.h @@ -30,8 +30,8 @@ #define IS31FL3731_DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 32 #define DRIVER_2_LED_TOTAL 32 -#define ISSI_DRIVER_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) -#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL + WS2812_LED_TOTAL) +#define IS31FL3731_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#define RGB_MATRIX_LED_COUNT (IS31FL3731_LED_COUNT + WS2812_LED_TOTAL) #define RGB_MATRIX_DEFAULT_VAL 80 #define RGB_MATRIX_KEYPRESSES diff --git a/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.c b/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.c index da83d358b9..35ac5a06b2 100644 --- a/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.c +++ b/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.c @@ -25,7 +25,7 @@ #ifdef RGB_MATRIX_ENABLE rgb_led_t rgb_matrix_ws2812_array[WS2812_LED_TOTAL]; -const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -99,28 +99,6 @@ const is31fl3731_led_t PROGMEM g_is31fl3731_leds[RGB_MATRIX_LED_COUNT] = { {1, C9_14, C8_14, C7_14}, //D14 {1, C9_15, C8_15, C6_14}, //D15 {1, C9_16, C7_15, C6_15}, //D16 - - //fake underglows 1- 20 - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0}, - {2, 0, 0, 0} }; __attribute__ ((weak)) @@ -169,7 +147,7 @@ static void init(void) { i2c_init(); is31fl3731_init(IS31FL3731_I2C_ADDRESS_1); is31fl3731_init(IS31FL3731_I2C_ADDRESS_2); - for (int index = 0; index < ISSI_DRIVER_TOTAL; index++) { + for (int index = 0; index < IS31FL3731_LED_COUNT; index++) { bool enabled = true; is31fl3731_set_led_control_register(index, enabled, enabled, enabled); } @@ -187,12 +165,12 @@ static void flush(void) { } static void set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { - if (index < ISSI_DRIVER_TOTAL) { + if (index < IS31FL3731_LED_COUNT) { is31fl3731_set_color(index, red, green, blue); } else { - rgb_matrix_ws2812_array[index - ISSI_DRIVER_TOTAL].r = red; - rgb_matrix_ws2812_array[index - ISSI_DRIVER_TOTAL].g = green; - rgb_matrix_ws2812_array[index - ISSI_DRIVER_TOTAL].b = blue; + rgb_matrix_ws2812_array[index - IS31FL3731_LED_COUNT].r = red; + rgb_matrix_ws2812_array[index - IS31FL3731_LED_COUNT].g = green; + rgb_matrix_ws2812_array[index - IS31FL3731_LED_COUNT].b = blue; } } diff --git a/keyboards/xelus/pachi/rgb/rev1/config.h b/keyboards/xelus/pachi/rgb/rev1/config.h index e51a176c84..8d86a977c1 100644 --- a/keyboards/xelus/pachi/rgb/rev1/config.h +++ b/keyboards/xelus/pachi/rgb/rev1/config.h @@ -41,8 +41,7 @@ #define IS31FL3741_DRIVER_COUNT 1 #define DRIVER_1_LED_TOTAL 117 -#define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL -#define ISSI_DRIVER_TOTAL RGB_MATRIX_LED_COUNT +#define IS31FL3741_LED_COUNT DRIVER_1_LED_TOTAL #define RGB_MATRIX_DEFAULT_VAL 80 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS diff --git a/keyboards/xelus/pachi/rgb/rev1/rev1.c b/keyboards/xelus/pachi/rgb/rev1/rev1.c index 1a3d9b2f4d..e43726115e 100644 --- a/keyboards/xelus/pachi/rgb/rev1/rev1.c +++ b/keyboards/xelus/pachi/rgb/rev1/rev1.c @@ -22,7 +22,7 @@ void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); } #ifdef RGB_MATRIX_ENABLE #include "i2c_master.h" #include "drivers/led/issi/is31fl3741.h" -const is31fl3741_led_t PROGMEM g_is31fl3741_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3741_led_t PROGMEM g_is31fl3741_leds[IS31FL3741_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -189,7 +189,7 @@ led_config_t g_led_config = { { static void init(void) { i2c_init(); is31fl3741_init(IS31FL3741_I2C_ADDRESS_1); - for (int index = 0; index < ISSI_DRIVER_TOTAL; index++) { + for (int index = 0; index < IS31FL3741_LED_COUNT; index++) { bool enabled = !( ( index == -1+0+13) || //A13 ( index == -1+13+3) || //B3 ( index == -1+13+13) || //B13 diff --git a/keyboards/xelus/pachi/rgb/rev2/config.h b/keyboards/xelus/pachi/rgb/rev2/config.h index da989e16a2..0afc9e2a43 100644 --- a/keyboards/xelus/pachi/rgb/rev2/config.h +++ b/keyboards/xelus/pachi/rgb/rev2/config.h @@ -41,8 +41,7 @@ #define IS31FL3741_DRIVER_COUNT 1 #define DRIVER_1_LED_TOTAL 117 -#define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL -#define ISSI_DRIVER_TOTAL RGB_MATRIX_LED_COUNT +#define IS31FL3741_LED_COUNT DRIVER_1_LED_TOTAL #define RGB_MATRIX_DEFAULT_VAL 80 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS diff --git a/keyboards/xelus/pachi/rgb/rev2/rev2.c b/keyboards/xelus/pachi/rgb/rev2/rev2.c index 729b6b0545..25d1406653 100644 --- a/keyboards/xelus/pachi/rgb/rev2/rev2.c +++ b/keyboards/xelus/pachi/rgb/rev2/rev2.c @@ -22,7 +22,7 @@ void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); } #ifdef RGB_MATRIX_ENABLE #include "i2c_master.h" #include "drivers/led/issi/is31fl3741.h" -const is31fl3741_led_t PROGMEM g_is31fl3741_leds[RGB_MATRIX_LED_COUNT] = { +const is31fl3741_led_t PROGMEM g_is31fl3741_leds[IS31FL3741_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -195,7 +195,7 @@ led_config_t g_led_config = { { static void init(void) { i2c_init(); is31fl3741_init(IS31FL3741_I2C_ADDRESS_1); - for (int index = 0; index < ISSI_DRIVER_TOTAL; index++) { + for (int index = 0; index < IS31FL3741_LED_COUNT; index++) { bool enabled = !( ( index == -1+0+13) || //A13 ( index == -1+13+3) || //B3 ( index == -1+13+13) || //B13 |