summaryrefslogtreecommitdiff
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/atom47/atom47.c31
-rw-r--r--keyboards/atom47/atom47.h25
-rw-r--r--keyboards/atom47/config.h73
-rw-r--r--keyboards/atom47/keymaps/LEdiodes/atom47.c31
-rw-r--r--keyboards/atom47/keymaps/LEdiodes/atom47.h25
-rw-r--r--keyboards/atom47/keymaps/LEdiodes/config.h73
-rw-r--r--keyboards/atom47/keymaps/LEdiodes/keymap.c35
-rw-r--r--keyboards/atom47/keymaps/LEdiodes/rules.mk65
-rw-r--r--keyboards/atom47/keymaps/default/keymap.c39
-rw-r--r--keyboards/atom47/keymaps/default/readme.md10
-rw-r--r--keyboards/atom47/readme.md28
-rw-r--r--keyboards/atom47/rules.mk65
-rw-r--r--keyboards/dz60/keymaps/LEdiodes/config.h58
-rw-r--r--keyboards/dz60/keymaps/LEdiodes/keymap.c141
-rw-r--r--keyboards/dz60/keymaps/LEdiodes/readme.md9
-rw-r--r--keyboards/dz60/keymaps/LEdiodes/rules.mk57
16 files changed, 765 insertions, 0 deletions
diff --git a/keyboards/atom47/atom47.c b/keyboards/atom47/atom47.c
new file mode 100644
index 0000000000..7b839e7967
--- /dev/null
+++ b/keyboards/atom47/atom47.c
@@ -0,0 +1,31 @@
+#include "atom47.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+ led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+};
+
+void led_init_ports(void) {
+ // * Set our LED pins as output
+ DDRB &= ~(1<<5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // Turn capslock on
+ PORTF |= (1<<5);
+ } else {
+ // Turn capslock off
+ PORTF &= ~(1<<5);
+ }
+ led_set_user(usb_led);
+}
diff --git a/keyboards/atom47/atom47.h b/keyboards/atom47/atom47.h
new file mode 100644
index 0000000000..2c19a20cc5
--- /dev/null
+++ b/keyboards/atom47/atom47.h
@@ -0,0 +1,25 @@
+#ifndef ATOM47_H
+#define ATOM47_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define KEYMAP_ANSI( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, \
+ k30, k31, k32, k33, k34, k36, k38, k39, k3a, k3c \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
+ {k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c} \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/keyboards/atom47/config.h b/keyboards/atom47/config.h
new file mode 100644
index 0000000000..410650f719
--- /dev/null
+++ b/keyboards/atom47/config.h
@@ -0,0 +1,73 @@
+/*
+Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0003
+#define MANUFACTURER Vortex
+#define PRODUCT Core
+#define DESCRIPTION Atom47 PCB for the Vortex Core
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B1,B2,B3,B7}
+#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#endif
+
+#define RGB_DI_PIN D0 // The pin the LED strip is connected to
+#define RGBLED_NUM 1 // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B1 // usually ROW
+#define QMK_LED B6 \ No newline at end of file
diff --git a/keyboards/atom47/keymaps/LEdiodes/atom47.c b/keyboards/atom47/keymaps/LEdiodes/atom47.c
new file mode 100644
index 0000000000..7b839e7967
--- /dev/null
+++ b/keyboards/atom47/keymaps/LEdiodes/atom47.c
@@ -0,0 +1,31 @@
+#include "atom47.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+ led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+};
+
+void led_init_ports(void) {
+ // * Set our LED pins as output
+ DDRB &= ~(1<<5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // Turn capslock on
+ PORTF |= (1<<5);
+ } else {
+ // Turn capslock off
+ PORTF &= ~(1<<5);
+ }
+ led_set_user(usb_led);
+}
diff --git a/keyboards/atom47/keymaps/LEdiodes/atom47.h b/keyboards/atom47/keymaps/LEdiodes/atom47.h
new file mode 100644
index 0000000000..2c19a20cc5
--- /dev/null
+++ b/keyboards/atom47/keymaps/LEdiodes/atom47.h
@@ -0,0 +1,25 @@
+#ifndef ATOM47_H
+#define ATOM47_H
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+#define KEYMAP_ANSI( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, \
+ k30, k31, k32, k33, k34, k36, k38, k39, k3a, k3c \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
+ {k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c} \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/keyboards/atom47/keymaps/LEdiodes/config.h b/keyboards/atom47/keymaps/LEdiodes/config.h
new file mode 100644
index 0000000000..410650f719
--- /dev/null
+++ b/keyboards/atom47/keymaps/LEdiodes/config.h
@@ -0,0 +1,73 @@
+/*
+Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0003
+#define MANUFACTURER Vortex
+#define PRODUCT Core
+#define DESCRIPTION Atom47 PCB for the Vortex Core
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B1,B2,B3,B7}
+#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+#endif
+
+#define RGB_DI_PIN D0 // The pin the LED strip is connected to
+#define RGBLED_NUM 1 // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B1 // usually ROW
+#define QMK_LED B6 \ No newline at end of file
diff --git a/keyboards/atom47/keymaps/LEdiodes/keymap.c b/keyboards/atom47/keymaps/LEdiodes/keymap.c
new file mode 100644
index 0000000000..3ea8609b61
--- /dev/null
+++ b/keyboards/atom47/keymaps/LEdiodes/keymap.c
@@ -0,0 +1,35 @@
+#include QMK_KEYBOARD_H
+
+// These are all aliases for the function layers.
+#define _L0 0
+#define _L1 1
+#define _L2 2
+#define _L3 3
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_L0] = KEYMAP_ANSI(
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_L1), \
+ KC_LCTL, KC_LGUI, KC_LALT, TG(_L3), KC_SPC, KC_SPC, MO(_L2), KC_RALT, KC_APP, KC_RCTRL), \
+
+[_L2] = KEYMAP_ANSI(
+ _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \
+ _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
+
+[_L1] = KEYMAP_ANSI(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
+ _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
+
+[_L3] = KEYMAP_ANSI(
+ _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, KC_0, KC_DOT, _______, _______, _______, RESET), \
+};
diff --git a/keyboards/atom47/keymaps/LEdiodes/rules.mk b/keyboards/atom47/keymaps/LEdiodes/rules.mk
new file mode 100644
index 0000000000..d446d3a699
--- /dev/null
+++ b/keyboards/atom47/keymaps/LEdiodes/rules.mk
@@ -0,0 +1,65 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/atom47/keymaps/default/keymap.c b/keyboards/atom47/keymaps/default/keymap.c
new file mode 100644
index 0000000000..cd8e622f20
--- /dev/null
+++ b/keyboards/atom47/keymaps/default/keymap.c
@@ -0,0 +1,39 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+#define _MA 0 //Main layer
+#define _FN 1 //Fn
+#define _FN1 2 //Fn1
+#define _PN 3 //Pn
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_MA] = KEYMAP_ANSI(
+ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_FN1), \
+ KC_LCTL, KC_LGUI, KC_LALT, MO(_PN), KC_SPC, KC_SPC, MO(_FN), KC_RALT, KC_APP, KC_RCTRL), \
+
+[_FN] = KEYMAP_ANSI(
+ _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \
+ _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
+
+[_FN1] = KEYMAP_ANSI(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
+ _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \
+
+[_PN] = KEYMAP_ANSI(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
+}; \ No newline at end of file
diff --git a/keyboards/atom47/keymaps/default/readme.md b/keyboards/atom47/keymaps/default/readme.md
new file mode 100644
index 0000000000..02422eb976
--- /dev/null
+++ b/keyboards/atom47/keymaps/default/readme.md
@@ -0,0 +1,10 @@
+To be updated...
+
+
+// This layer is just a blank template to be copied for easy layer creation. please don not edit it.
+
+ [_LX] = KEYMAP_ANSI(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
diff --git a/keyboards/atom47/readme.md b/keyboards/atom47/readme.md
new file mode 100644
index 0000000000..fec7843ae4
--- /dev/null
+++ b/keyboards/atom47/readme.md
@@ -0,0 +1,28 @@
+# ATOM47
+
+![ATOM47](https://i.imgur.com/rjrFTKT.png)
+
+## Support
+Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot)
+Hardware Supported: ATOM47
+Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)
+
+
+## Features
+QMK Firmware
+6 Underglow RGB leds
+In-switch leds
+Through-hole micro usb connector (less likely to break off!)
+South facing leds for the QMX/Zealencio users
+Multiple layouts
+Easily reachable reset button under the spacebar
+CapsLock indicator
+
+## Build
+To build the default keymap, simply run `make atom47:default`.
+
+For an alternative, heavily modified layout you would just need to run `make atom47:LEdiodes`.
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+![ATOM47](https://i.imgur.com/WebeUOF.png)
diff --git a/keyboards/atom47/rules.mk b/keyboards/atom47/rules.mk
new file mode 100644
index 0000000000..d446d3a699
--- /dev/null
+++ b/keyboards/atom47/rules.mk
@@ -0,0 +1,65 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
diff --git a/keyboards/dz60/keymaps/LEdiodes/config.h b/keyboards/dz60/keymaps/LEdiodes/config.h
new file mode 100644
index 0000000000..bb78d9bb66
--- /dev/null
+++ b/keyboards/dz60/keymaps/LEdiodes/config.h
@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x2260
+#define DEVICE_VER 0x0001
+#define MANUFACTURER KBDFans
+#define PRODUCT DZ60
+#define DESCRIPTION DZ60 Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_LEVELS 5
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 16
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+/* sets 'Auto Shift' timeouts */
+#define AUTO_SHIFT_TIMEOUT 150
+#define NO_AUTO_SHIFT_SPECIAL
+
+#endif
diff --git a/keyboards/dz60/keymaps/LEdiodes/keymap.c b/keyboards/dz60/keymaps/LEdiodes/keymap.c
new file mode 100644
index 0000000000..46bdb5fed1
--- /dev/null
+++ b/keyboards/dz60/keymaps/LEdiodes/keymap.c
@@ -0,0 +1,141 @@
+#include "xd60.h"
+#include "action_layer.h"
+
+#Define _L0 0
+#Define _L1 1
+#Define _L2 2
+#Define _L3 3
+#Define _L4 4
+
+#define _______ KC_TRNS
+
+/*
+ * template
+ * [_L1] = KEYMAP(
+ * _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+ * _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ * _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ * _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+ * _______,_______,_______, _______,_______,_______, _______,_______,_______,_______,_______,
+ *
+ *
+ *\
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap _L0: (Layer 0 - Base Layer) This is the default layer
+ * This layer has a key set to MO(_L1) which means when held down Layer 1 will become active, If Layer 1 does not have anything set for tat key is will revert to uing the key set at layer 0.
+ * LT(_L1, KC_1) means that when the "1" key is long touched then it will activate the layer _L1 key(F1) but if the key is just tapped it will activate the "1" key.
+ * KC_GESC = Escape when tapped, ` when pressed with Shift or GUI
+ * KC_LSPO = Left Shift when held, ( when tapped
+ * TD(LT(_L3,KC_SPACE)) = This is a test... hoping it will tap dance if double tapped it does enter if single tap it does space if long hold down it does _L3(Layer 3).
+ * LT(_L3,KC_SPACE) = if tapped it does space, is long touch it does _L3(Layer 3)
+ * BL_TOGG = Toggles the LEDs.
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Bkspc| Del |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ |
+ * |-----------------------------------------------------------------------------------------+
+ * | _L4 | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift | Z | X | C | V | B | N | M | , | . | / | RSh | U | _L1 |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl | Win | Alt | _L3[Space] |LEdiodes| Space |Win | _L2| L | D | R |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L0] = KEYMAP(
+ KC_GESC, LT(_L1, KC_1),LT(_L1, KC_2),LT(_L1, KC_3),LT(_L1, KC_4),LT(_L1, KC_5),LT(_L1, KC_6),LT(_L1, KC_7),LT(_L1, KC_8),LT(_L1, KC_9),LT(_L1, KC_0),LT(_L1, KC_MINS),LT(_L1, KC_EQL),KC_BSPC, KC_DEL, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \
+ KC_LSPO, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPO, KC_UP, M0(_L1), \
+ KC_LCTL, KC_LGUI, KC_LALT, TD(LT(_L3,KC_SPACE)),BL_TOGG,TD(TD_SPC_ENT), KC_RGUI, M0(_L2), KC_LEFT, KC_DOWN, KC_RIGHT),
+
+/* Keymap _L1: (Layer 1) This is function layer 1
+ * This layer is activated while the Fn key is being held down.
+ * ,-----------------------------------------------------------------------------------------.
+ * | Reset | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | F13| F14|
+ * |-----------------------------------------------------------------------------------------+
+ * | | WhUp| U | WhDn | | | | | | PrtScr | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | L | D | R | | | Home | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | End | VolDn|VolUp|Mute | | | PgUp| |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | | Home| PgDn| End |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L1] = KEYMAP(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \
+ _______, KC_WH_U, KC_UP, KC_WH_D, _______, _______,_______, _______, _______, _______, KC_PSCR, _______, _______, _______, \
+ _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_HOME, _______, _______, _______, KC_HOME, _______, _______, _______, \
+ _______, _______, _______, KC_APP, BL_STEP,_______, KC_END, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, KC_PGUP, _______, \
+ _______, _______, _______, _______,_______,_______, _______, _______, KC_HOME, KC_PGDOWN, KC_END),
+
+/* Keymap _L2: (Layer 2) This is function layer 2
+ * This layer is activated while the Fn2 key is being held down.
+ * LCA(KC_TAB) = Hold Left Control and Alt and press kc_tab which cycles trough open apps.
+ * MEH(KC_TAB) = Hold Left Control, Shift and Alt and press kc_TAB to cycle backwards through apps.
+ * ,-----------------------------------------------------------------------------------------.
+ * | | | | | | | | | | | | | | | LCA(KC_TAB)|
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | | | | | | | |MEH(KC_TAB)
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | || | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L2] = KEYMAP(
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,LCA(KC_TAB), \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, MEH(KC_TAB), \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MS_BTN1,KC_MS_UP,KC_MS_BTN2, \
+ _______,_______,_______, _______,_______,_______, _______,_______,KC_MS_LEFT,KC_MS_DOWN,KC_MS_RIGHT,
+
+};
+
+// Custom Actions
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
+};
+
+// Macros
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) { register_code(KC_RSFT); }
+ else { unregister_code(KC_RSFT); }
+ break;
+ }
+
+ return MACRO_NONE;
+};
+
+// Loop
+void matrix_scan_user(void) {
+ // Empty
+};
+
+//Tap Dance Declarations
+enum {
+ TD_SPC_ENT = 0,
+ TD_KC_LSFT_CAPS = 0,
+ TD_KC_RSFT_CAPS = 0
+};
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+
+ //Tap once for space, tap twice for enter
+ [TD_SPC_ENT] = ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT),
+ //Tap once for Left Shift, twice for Caps Lock
+ [TD_KC_LSFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS),
+ //Tap once for Right Shift, twice for Caps Lock
+ [TD_KC_RSFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_RSFT, KC_CAPS)
+
+// Other declarations would go here, separated by commas, if you have them
+
+};
diff --git a/keyboards/dz60/keymaps/LEdiodes/readme.md b/keyboards/dz60/keymaps/LEdiodes/readme.md
new file mode 100644
index 0000000000..db83b2494d
--- /dev/null
+++ b/keyboards/dz60/keymaps/LEdiodes/readme.md
@@ -0,0 +1,9 @@
+# LEdiodes Keymap for XD60 60% PCB
+
+![LEdiodes Layer 0 Keymap for XD60](https://i.imgur.com/pDneawX.jpg)
+
+## Additional Notes
+Layer 0(default) Keymap for LEdiodes XD60.
+
+## Build
+To build the default keymap, simply run `make xd60:LEdiodes`.
diff --git a/keyboards/dz60/keymaps/LEdiodes/rules.mk b/keyboards/dz60/keymaps/LEdiodes/rules.mk
new file mode 100644
index 0000000000..f54d9500fb
--- /dev/null
+++ b/keyboards/dz60/keymaps/LEdiodes/rules.mk
@@ -0,0 +1,57 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
+AUTO_SHIFT_ENABLE = yes # If the time depressed is greater than or equal to the AUTO_SHIFT_TIMEOUT, then a shifted version of the key is emitted. If the time is less than the AUTO_SHIFT_TIMEOUT time, then the normal state is emitted \ No newline at end of file