diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/atreus/keymaps/jeremy/keymap.c | 66 | ||||
| -rw-r--r-- | keyboards/atreus/keymaps/jeremy/readme.md | 45 | ||||
| -rw-r--r-- | keyboards/hhkb/keymaps/dbroqua/keymap.c | 70 | ||||
| -rw-r--r-- | keyboards/hhkb/keymaps/dbroqua/readme.md | 9 | ||||
| -rw-r--r-- | keyboards/lets_split/lets_split.c | 8 | ||||
| -rw-r--r-- | keyboards/planck/keymaps/cbbrowne/config.h | 5 | ||||
| -rw-r--r-- | keyboards/planck/keymaps/cbbrowne/keymap.c | 97 | ||||
| -rw-r--r-- | keyboards/planck/keymaps/cbbrowne/readme.md | 43 |
8 files changed, 313 insertions, 30 deletions
diff --git a/keyboards/atreus/keymaps/jeremy/keymap.c b/keyboards/atreus/keymaps/jeremy/keymap.c new file mode 100644 index 0000000000..90ec6f9049 --- /dev/null +++ b/keyboards/atreus/keymaps/jeremy/keymap.c @@ -0,0 +1,66 @@ +// This is the personal keymap of Jeremy Cowgar (@jcowgar). It is written for the programmer. + +#include "atreus.h" +#include "action_layer.h" +#include "keymap_colemak.h" + +#define PREVENT_STUCK_MODIFIERS + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +#define ALPH 0 +#define NUMS 1 +#define CURS 2 +#define SYMB 3 +#define FKEY 4 + +// Some handy macros to keep the keymaps clean and easier to maintain +#define KM_SAVE LGUI(CM_S) +#define KM_CLSE LGUI(CM_W) +#define KM_OPEN LGUI(CM_O) + +#define KM_COPY LGUI(KC_C) +#define KM_CUT LGUI(KC_X) +#define KM_PAST LGUI(KC_V) +#define KM_UNDO LGUI(KC_Z) +#define KM_REDO LGUI(LSFT(KC_Z)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[ALPH] = { + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P}, + {KC_A, LT(NUMS, KC_S), LT(FKEY, KC_D), KC_F, KC_G, KC_TRNS, KC_H, KC_J, LT(CURS, KC_K), LT(SYMB, KC_L), KC_SCLN}, + {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LALT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH}, + {KC_LCTL, KC_ESC, KC_NO, KC_LSFT, KC_SPC, KC_LGUI, KC_ENT, KC_RSFT, KC_NO, KC_ESC, KC_RCTL} +}, +[NUMS] = { + {KC_TRNS, KC_TRNS, KC_TRNS, KC_ASTR, KC_SLSH, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_SLSH}, + {KC_TRNS, KC_TRNS, KC_EQL, KC_PLUS, KC_MINS, KC_TRNS, KC_LPRN, KC_4, KC_5, KC_6, KC_ASTR}, + {KC_TRNS, KC_TRNS, KC_DOT, KC_COMM, CM_SCLN, KC_TRNS, KC_RPRN, KC_1, KC_2, KC_3, KC_MINS}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_DOT, KC_EQL, KC_PLUS} +}, +[CURS] = { + {KC_TRNS, KC_BSPC, KC_UP, KC_DELT, KC_PGUP, KC_TRNS, KC_TRNS, KM_SAVE, KC_TRNS, KM_OPEN, KC_TRNS}, + {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_TRNS, KM_UNDO, KC_LALT, KC_TRNS, KC_LGUI, KC_TRNS}, + {KC_TRNS, KC_VOLD, KC_MUTE, KC_VOLU, KC_MPLY, KM_COPY, KM_REDO, KM_CLSE, KC_TRNS, KC_TRNS, KC_TRNS}, + {KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TAB, KM_CUT, KM_PAST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +[SYMB] = { + {KC_BSLS, KC_EXLM, KC_LABK, KC_RABK, CM_COLN, KC_TRNS, KC_UNDS, KC_DLR, KC_QUES, KC_TRNS, KC_PERC}, + {KC_AT, KC_AMPR, KC_LPRN, KC_RPRN, CM_SCLN, KC_TRNS, KC_COMM, KC_DOT, KC_QUOT, KC_TRNS, KC_TILD}, + {KC_HASH, KC_PIPE, KC_LCBR, KC_RCBR, KC_SLSH, KC_TRNS, KC_TRNS, KC_GRV, KC_DQT, KC_TRNS, KC_CIRC}, + {KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}, +[FKEY] = { + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F5, KC_F6, KC_F7, KC_F8}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4}, + {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS} +}}; + +const uint16_t PROGMEM fn_actions[] = {}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) {} + + return MACRO_NONE; +}; diff --git a/keyboards/atreus/keymaps/jeremy/readme.md b/keyboards/atreus/keymaps/jeremy/readme.md new file mode 100644 index 0000000000..df0179a8e0 --- /dev/null +++ b/keyboards/atreus/keymaps/jeremy/readme.md @@ -0,0 +1,45 @@ +Jeremy's Atreus Key Mapping +=========================== + +I am a programmer by trade that suffers from the beginning stages of RSI. As a programmer I use letters, symbols and cursor navigation most often. To prevent strange finger gymnastics, I wrote a script to rank which non-letter characters occurred in my primary source projects most often and then placed these characters in the easiest to reach locations, for me. I made heavy use of momentary layer toggling. + +My layout is also geared toward a software based Colemak mapping. I would like it to be hardware, but I use my Laptop on the go frequently and thus my laptop keyboard. I have moved the keycaps to reflect the Colemak layout. My laptop is a MacBook Pro (2015). + +## Main Layers + +1. [Letters](http://www.keyboard-layout-editor.com/#/gists/6861cb9df09ce78efaddf8aa7471e3ac) +2. [Symbols](http://www.keyboard-layout-editor.com/#/gists/8956a18b508a78e93b9c38ec3fcccaa5) +3. [Navigation](http://www.keyboard-layout-editor.com/#/gists/6ed492b714a7f54eb1c5de09b87fd8c4) +4. [Numbers](http://www.keyboard-layout-editor.com/#/gists/399ceb5624e8388e48a3a5eacac8e973) +5. [Function Keys](http://www.keyboard-layout-editor.com/#/gists/7fd7dc24c7048316f3724b1893c64e89) + +## Notes + +### General + +Some characters can be accessed multiple ways. This was done because you may be in a given layer, such as numbers, where when doing math, you may need quick access to the parentheses characters for grouping. This prevents some layer switching. + +I own an ErgoDox and plan on porting this as a base layer, then using the extra keys the ErgoDox provides accordingly. My goal, though, is to be fully functional on this base setup and build everything into muscle memory. + +### Symbol Layer + +1. I placed characters that deal with an if statement close together, such as !, & and |. +2. All matching brace/bracket characters are together as well. + +### Number Layer + +1. Everything I did was a compromise when trying to mimic a ten-key. I did the best I could. +2. Operators are duplicated on the right and left. I do not find it comfortable to use my pinky much, so I tend to use my left hand for +, -, * and / but those were also placed on the right hand to mimic the ten-key. +3. Parentheses were added for typing on the calculator. + +### Cursor Layer + +1. It includes basic audio controls because they didn't really fit anywhere else +2. It contains basic file manipulation. I'm not sure that was a good idea. I do save all the time, but Cmd+S isn't exactly hard. +3. It contains the backspace and delete keys right on top of the left and right arrows. +4. Cmd and Opt keys are duplicated. This makes for very easy navigation, for example on a Mac, Opt+Left/Right moves word by word. It also backspaces or deletes word by word. + +### Function Layer + +1. Almost all other layers I saw grouped the F keys into a bunch of three. This only gives nine function keys in order if you attempt to stay as close to the home row as possible. I went with a group of four, which gives all twelve function keys to the right hand, one row below and above the home row. +2. I duplicated the Command and Option keys the same as on the cursor layer. This makes it dead easy to hit modified function keys such as Cmd+Opt+F5. It's also easy to toss in a Shift modifier in there with the right thumb since the bottom row is preserved. diff --git a/keyboards/hhkb/keymaps/dbroqua/keymap.c b/keyboards/hhkb/keymaps/dbroqua/keymap.c new file mode 100644 index 0000000000..ef43aae281 --- /dev/null +++ b/keyboards/hhkb/keymaps/dbroqua/keymap.c @@ -0,0 +1,70 @@ +/* + * dbroqua HHKB Layout + */ +#include "hhkb.h" + +#define BASE 0 +#define FN 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* BASE Level: Default Layer + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | Left |Right| + * +-----------------------------------------------------------------------------------------+ + * | Gui | Alt | Space | AltGr | fn | + * `----------------------------------------------------------------´ + */ + [BASE] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LEFT, KC_RGHT, \ + KC_LGUI, KC_LALT, /* */ KC_SPC, KC_RALT, MO(FN) + ), + + /* BASE Level: Default Layer + * ,-----------------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F0 | F11 | F12 | Ins | Del| + * |-----------------------------------------------------------------------------------------+ + * | Caps | | | | | | | | | | | Up | | | + * |-----------------------------------------------------------------------------------------+ + * | | Vol-| Vol+| Mute| | | |PrtSc| Home| PgUp| Left |Right| | + * |-----------------------------------------------------------------------------------------+ + * | | Prev| Play| Next| | | | | End |PgDwn| Down| Up | Down| + * +-----------------------------------------------------------------------------------------+ + * | | | | | | + * `----------------------------------------------------------------´ + */ + [FN] = KEYMAP( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \ + KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_UP, KC_DOWN, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/hhkb/keymaps/dbroqua/readme.md b/keyboards/hhkb/keymaps/dbroqua/readme.md new file mode 100644 index 0000000000..0afebc84c8 --- /dev/null +++ b/keyboards/hhkb/keymaps/dbroqua/readme.md @@ -0,0 +1,9 @@ +# Dbroqua Layout + +* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/78eaf35e80bb714eea80cb4049dedb01 + +# Programming Instructions: +Enter into programming mode and run the following command. +``` +$ sudo KEYMAP=dbroqua make dfu +```
\ No newline at end of file diff --git a/keyboards/lets_split/lets_split.c b/keyboards/lets_split/lets_split.c index 574c116a75..c505d3a6e3 100644 --- a/keyboards/lets_split/lets_split.c +++ b/keyboards/lets_split/lets_split.c @@ -24,7 +24,9 @@ void matrix_init_kb(void) { }; void shutdown_user(void) { - PLAY_NOTE_ARRAY(tone_goodbye, false, 0); - _delay_ms(150); - stop_all_notes(); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); + #endif } diff --git a/keyboards/planck/keymaps/cbbrowne/config.h b/keyboards/planck/keymaps/cbbrowne/config.h index 58cd2cc5bc..1e04ba61d7 100644 --- a/keyboards/planck/keymaps/cbbrowne/config.h +++ b/keyboards/planck/keymaps/cbbrowne/config.h @@ -3,6 +3,9 @@ #include "../../config.h" +#define LEADER_TIMEOUT 300 +#define BACKLIGHT_BREATHING + /* cbbrowne user configuration */ #define randadd 53 @@ -16,5 +19,3 @@ #endif - - diff --git a/keyboards/planck/keymaps/cbbrowne/keymap.c b/keyboards/planck/keymaps/cbbrowne/keymap.c index 898f6f0e0a..7f1601af75 100644 --- a/keyboards/planck/keymaps/cbbrowne/keymap.c +++ b/keyboards/planck/keymaps/cbbrowne/keymap.c @@ -65,10 +65,11 @@ */ enum layers { - _QW = 0, /* Qwerty mapping */ - _LW, /* Lower layer, where top line has symbols !@#$%^&*() */ - _RS, /* Raised layer, where top line has digits 1234567890 */ - _KP, /* Key pad */ + _QWERTY = 0, /* Qwerty mapping */ + _LOWER, /* Lower layer, where top line has symbols !@#$%^&*() */ + _RAISE, /* Raised layer, where top line has digits 1234567890 */ + _KEYPAD, /* Key pad */ + _ADJUST, /* Special Adjust layer coming via tri-placement */ }; enum macro_id { @@ -76,37 +77,60 @@ enum macro_id { M_USERNAME, M_RANDDIGIT, M_RANDLETTER, - M_VERSION + M_VERSION, + MACRO_UPPER, + MACRO_LOWER, }; +#define M_LOWER M(MACRO_LOWER) +#define M_UPPER M(MACRO_UPPER) +#define ROT_LED M(M_LED) /* Rotate LED */ +#define QWERTY DF(_QWERTY) /* Switch to QWERTY layout */ +#define KEYPAD DF(_KEYPAD) /* Switch to keypad */ +#define USERNAME M(M_USERNAME) /* shortcut for username */ +#define RANDDIG M(M_RANDDIGIT) +#define RANDALP M(M_RANDLETTER) +#define CTLENTER MT(MOD_RCTL, KC_ENT) +#define SHIFTQUOTE MT(MOD_RSFT, KC_QUOT) +#define ALTRIGHT MT(MOD_LALT, KC_RGHT) +#define MVERSION M(M_VERSION) + + /* Note that Planck has dimensions 4 rows x 12 columns */ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_QW] = { /* Qwerty */ +[_QWERTY] = { /* Qwerty */ {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, - {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MT(MOD_RSFT, KC_ENT)}, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT }, - {KC_TAB, M(M_LED), KC_LALT, KC_LGUI, MO(_LW), KC_SPC, KC_SPC, MO(_RS), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, CTLENTER}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SHIFTQUOTE }, + {KC_TAB, KC_LALT, ROT_LED, KC_LGUI, M_LOWER, KC_SPC, KC_SPC, M_UPPER, KC_LEFT, KC_DOWN, KC_UP, ALTRIGHT} /* Note that KC_SPC is recorded TWICE, so that either matrix position can activate it */ }, -[_RS] = { /* RAISE */ +[_RAISE] = { /* RAISE */ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, RESET, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, -[_LW] = { /* LOWER */ +[_LOWER] = { /* LOWER */ {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, DF(_QW), DF(_KP), DF(_KP), RESET, _______}, - {_______, DF(_KP), _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, RESET, _______}, + {_______, KEYPAD, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + }, +[_KEYPAD] = { /* Key Pad */ + {KC_ESC, USERNAME, MVERSION, KC_F10, KC_F11, KC_F12, KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC}, + {KC_LCTL, RANDDIG, KC_F5, KC_F6, KC_F7, KC_F8, KC_PGDN, KC_KP_MINUS, KC_4, KC_5, KC_6, KC_PIPE}, + {KC_LSFT, RANDALP, KC_F1, KC_F2, KC_F3, KC_F4, KC_DEL, KC_KP_PLUS, KC_1, KC_2, KC_3, KC_ENTER}, + {KC_TAB, KC_LALT, ROT_LED, KC_LGUI, M_LOWER, KC_SPC, KC_SPC, QWERTY, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT} }, -[_KP] = { /* Key Pad */ - {KC_ESC, M(M_USERNAME), M(M_VERSION), KC_F10, KC_F11, KC_F12, KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC}, - {KC_LCTL, M(M_RANDDIGIT), KC_F5, KC_F6, KC_F7, KC_F8, KC_PGDN, KC_KP_MINUS, KC_4, KC_5, KC_6, KC_PIPE}, - {KC_LSFT, M(M_RANDLETTER), KC_F1, KC_F2, KC_F3, KC_F4, KC_DEL, KC_KP_PLUS, KC_1, KC_2, KC_3, KC_ENTER}, - {BL_STEP, M(M_LED), KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_SPC, DF(_QW), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT} -} + +[_ADJUST] = { /* Adjustments - gonna shift the wild tools in here */ + {ROT_LED,USERNAME,MVERSION, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + {_______, RANDDIG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + {_______, RANDALP, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______ }, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ } +} }; /* What is fn_actions actually used for??? */ @@ -171,6 +195,39 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) unregister_code (KC_A + rval); } break; + case MACRO_UPPER: + if (record->event.pressed) + { + layer_on(_RAISE); +#ifdef BACKLIGHT_ENABLE + breathing_speed_set(2); + breathing_pulse(); +#endif + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + else + { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + case MACRO_LOWER: + if (record->event.pressed) + { + layer_on(_LOWER); +#ifdef BACKLIGHT_ENABLE + breathing_speed_set(2); + breathing_pulse(); +#endif + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + else + { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + break; + } return MACRO_NONE; }; diff --git a/keyboards/planck/keymaps/cbbrowne/readme.md b/keyboards/planck/keymaps/cbbrowne/readme.md index 51979f6300..184142e0c1 100644 --- a/keyboards/planck/keymaps/cbbrowne/readme.md +++ b/keyboards/planck/keymaps/cbbrowne/readme.md @@ -24,7 +24,26 @@ doing sundry experimentation: - Key [2][2] aka "a" uses a random number generator to select a digit 0-9 at random - Key [3][2] aka "z" uses a random number generator to select a letter a-z at random - Key [1][3] aka "e" spits out the keymap version number - * Minor use of Space Cadet Shift; my SHIFT key has switched to KC_LSP0, so that when I just hit SHIFT, I get a left parens: ( which is great for Lisping. I don't have a Right Shift, so I don't get an autoclose; I think I'll live with that until a Planck successor with more lines of keys :-) + * Trying out sgoodwin's "hold Enter down to get Shift" + - Liking this Quite Well Enough... + - Applied this to both Shift and Quote + - It seems likely that Alt should get a right-hand-side, akin to this... + - Alt needs to move, and get a RHS + - Hence ALTRIGHT, and shifted ROT_LED over + - Emacs likes this!!! :-) + - I'm suspicious that I'll want to shift ROT_LED another location over, + so some modifier can replace the OS/KC_LGUI key + * I have added an alternate ADJUST layer that is activated via update_tri_layer() + - e.g. - LOWER+RAISE simultaneously + - This seems entirely more useful for handling my "special keys" + like the random numbers, user name, and such, than the keypad layer + * The _ADJUST layer provides a good place to have RESET + - But this isn't strictly enough; I want RESET somewhat accessible from + main layer lest an error hide that layer + - I never use the OS/KC_LGUI key (that's Command on MacOS, Windows + Key on Windows), so that's a good place to have it as a chord of + some sort + 2. Some code structure ideas --------------------------------------------------- @@ -43,8 +62,8 @@ doing sundry experimentation: only need to fit 4 symbols onto each line, rather than 12. I used enums to manage layer IDs and macro IDs so that I don't need - to care (beyond "start at 0", and arguably that's not needed) about - their values. + to care (beyond "start at 0", and arguably even that's not needed) + about their values. 3. Things I did not like about the default mapping --------------------------------------------------------- @@ -57,12 +76,27 @@ doing sundry experimentation: and shift ESC off the first column so KC_LCTL and KC_LALT can be on the first column. * I needed to swap ' and ENTER + +4. Unuseful experiments +--------------------------------------------------------- + +I have tried some things out that didn't turn out particularly well. +I'll note some of these for posterity, hopefully helpful in not doing +unwise things again... + * I tried added Workman alongside Dvorak and Colemak - Boy, oh boy, these don't help!!! - I have done 30 years of learning of Emacs key mappings, and these alternative keyboards massively mess me up -4. TODO + * Space Cadet Shift; switching L_SHIFT to KC_LSP0, so that when I + just hit SHIFT, I get a left parens. In principle, this is great + for Lisping. + - Unfortunately, there are times when mouse interfaces use SHIFT + to allow selecting multiple items, and this really interferes + with that + +5. TODO --------------------------------------------------------- * I use tmux quite a lot; the mollat keymap seems to have some @@ -77,4 +111,3 @@ doing sundry experimentation: * The jeebak keymap seems to have some neat ideas: - Number layer which is aggressive about having numbers in several places - Touch layer seems interesting - * Trying out sgoodwin's "hold Enter down to get Shift"
\ No newline at end of file |