summaryrefslogtreecommitdiff
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/converter/palm_usb/config.h120
-rw-r--r--keyboards/converter/palm_usb/matrix.c398
-rw-r--r--keyboards/converter/palm_usb/readme.md96
-rw-r--r--keyboards/converter/palm_usb/rules.mk46
-rw-r--r--keyboards/converter/palm_usb/stowaway/keymaps/default/keymap.c59
-rw-r--r--keyboards/converter/palm_usb/stowaway/rules.mk0
-rw-r--r--keyboards/converter/palm_usb/stowaway/stowaway.h53
7 files changed, 772 insertions, 0 deletions
diff --git a/keyboards/converter/palm_usb/config.h b/keyboards/converter/palm_usb/config.h
new file mode 100644
index 0000000000..4520725a1d
--- /dev/null
+++ b/keyboards/converter/palm_usb/config.h
@@ -0,0 +1,120 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* This code makes use of cy384's Arduino USB HID adapter for the Palm Portable
+ Keyboard, released under the BSD licence */
+
+
+
+
+#pragma once
+
+#define CUSTOM_MATRIX 2
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0001
+#define DEVICE_VER 0x0100
+#define MANUFACTURER QMK
+#define PRODUCT Stowaway converter
+#define DESCRIPTION USB converter for Stowaway keyboard
+
+// IO pins to serial
+// https://deskthority.net/wiki/Arduino_Pro_Micro for pin lookup
+#define VCC_PIN D1 // pro micro 2
+#define RX_PIN D0 //pro micro 3 , was 8 on cy384
+#define RTS_PIN C6 // 5 //[ was D4 // 4 on the cy384
+#define DCD_PIN E6 //7
+
+// if using the particular arduino pinout of CY384
+#ifdef CY384
+ #define GND_PIN D7 //6
+ #define PULLDOWN_PIN B1 // 15
+#endif
+
+#ifndef HANDSPRING
+// Set to 1 for Handspring or to disable RTS/DCD based handshake.
+ #define HANDSPRING 0
+#endif
+
+#define MAXDROP 10 // check if keyboard is connected every X polling cycles
+#define SLEEP_TIMEOUT 500000 // check keyboard/reset this many millis
+
+
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 8
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
+ keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+/* Serial(USART) configuration
+ * asynchronous, negative logic, 9600baud, no flow control
+ * 1-start bit, 8-data bit, non parity, 1-stop bit
+ */
+#define SERIAL_SOFT_BAUD 9600
+#define SERIAL_SOFT_PARITY_NONE
+#define SERIAL_SOFT_BIT_ORDER_LSB
+#if (HANDSPRING == 0)
+ #define SERIAL_SOFT_LOGIC_NEGATIVE //RS232 logic
+#endif
+/* RXD Port */
+#define SERIAL_SOFT_RXD_ENABLE
+
+// we are using Pro micro pin 3 / D0 as serial
+#define SERIAL_SOFT_RXD_DDR DDRD
+#define SERIAL_SOFT_RXD_PORT PORTD
+#define SERIAL_SOFT_RXD_PIN PIND
+#define SERIAL_SOFT_RXD_BIT 0
+#define SERIAL_SOFT_RXD_VECT INT0_vect
+
+/* RXD Interupt */
+#define SERIAL_SOFT_RXD_INIT() do { \
+ /* pin configuration: input with pull-up */ \
+ SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
+ SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
+ /* enable interrupt: INT0(rising edge) */ \
+ EICRA |= ((1<<ISC01)|(1<<ISC00)); \
+ EIMSK |= (1<<INT0); \
+ sei(); \
+} while (0)
+#define SERIAL_SOFT_RXD_INT_ENTER()
+#define SERIAL_SOFT_RXD_INT_EXIT() do { \
+ /* clear interrupt flag */ \
+ EIFR = (1<<INTF0); \
+} while (0)
+#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
+
+/* TXD Port */
+#define SERIAL_SOFT_TXD_ENABLE
+#define SERIAL_SOFT_TXD_DDR DDRD
+#define SERIAL_SOFT_TXD_PORT PORTD
+#define SERIAL_SOFT_TXD_PIN PIND
+#define SERIAL_SOFT_TXD_BIT 3
+#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0)
+#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0)
+#define SERIAL_SOFT_TXD_INIT() do { \
+ /* pin configuration: output */ \
+ SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \
+ /* idle */ \
+ SERIAL_SOFT_TXD_ON(); \
+} while (0)
+
+
diff --git a/keyboards/converter/palm_usb/matrix.c b/keyboards/converter/palm_usb/matrix.c
new file mode 100644
index 0000000000..49212f2ef1
--- /dev/null
+++ b/keyboards/converter/palm_usb/matrix.c
@@ -0,0 +1,398 @@
+/*
+Copyright 2018 milestogo
+with elements Copyright 2014 cy384 under a modified BSD license
+building on qmk structure Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "protocol/serial.h"
+#include "timer.h"
+#include "pincontrol.h"
+
+
+/*
+ * Matrix Array usage:
+ *
+ * ROW: 12(4bits)
+ * COL: 8(3bits)
+ *
+ * +---------+
+ * 0|00 ... 07|
+ * 1|00 ... 07|
+ * :| ... |
+ * :| ... |
+ * A| |
+ * B| |
+ * +---------+
+ */
+static uint8_t matrix[MATRIX_ROWS];
+
+
+// we're going to need a sleep timer
+static uint16_t last_activity ;
+// and a byte to track duplicate up events signalling all keys up.
+static uint16_t last_upKey ;
+// serial device can disconnect. Check every MAXDROP characters.
+static uint16_t disconnect_counter = 0;
+
+
+// bitmath masks.
+#define KEY_MASK 0b10000000
+#define COL_MASK 0b00000111
+#define ROW_MASK 0b01111000
+
+
+#define ROW(code) (( code & ROW_MASK ) >>3)
+#define COL(code) ((code & COL_MASK) )
+#define KEYUP(code) ((code & KEY_MASK) >>7 )
+
+static bool is_modified = false;
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+
+void pins_init(void) {
+ // set pins for pullups, Rts , power &etc.
+
+ //print ("pins setup\n");
+ pinMode(VCC_PIN, PinDirectionOutput);
+ digitalWrite(VCC_PIN, PinLevelLow);
+
+#if ( HANDSPRING == 0)
+
+#ifdef CY835
+ pinMode(GND_PIN, PinDirectionOutput);
+ digitalWrite(GND_PIN, PinLevelLow);
+
+ pinMode(PULLDOWN_PIN, PinDirectionOutput);
+ digitalWrite(PULLDOWN_PIN, PinLevelLow);
+#endif
+
+ pinMode(DCD_PIN, PinDirectionInput);
+ pinMode(RTS_PIN, PinDirectionInput);
+#endif
+
+/* check that the other side isn't powered up.
+ test=digitalRead(DCD_PIN);
+ xprintf("b%02X:", test);
+ test=digitalRead(RTS_PIN);
+ xprintf("%02X\n", test);
+*/
+
+}
+
+uint8_t rts_reset(void) {
+ static uint8_t firstread ;
+/* bounce RTS so device knows it is rebooted */
+
+// On boot, we keep rts as input, then switch roles here
+// on leaving sleep, we toggle the same way
+
+ firstread=digitalRead(RTS_PIN);
+ // printf("r%02X:", firstread);
+
+ pinMode(RTS_PIN, PinDirectionOutput);
+
+ if (firstread == PinLevelHigh) {
+ digitalWrite(RTS_PIN, PinLevelLow);
+ }
+ _delay_ms(10);
+ digitalWrite(RTS_PIN, PinLevelHigh);
+
+
+/* the future is Arm
+ if (palReadPad(RTS_PIN_IOPRT) == PinLevelLow)
+ {
+ _delay_ms(10);
+ palSetPadMode(RTS_PINn_IOPORT, PinDirectionOutput_PUSHPULL);
+ palSetPad(RTS_PORT, RTS_PIN);
+ }
+ else
+ {
+ palSetPadMode(RTS_PIN_RTS_PORT, PinDirectionOutput_PUSHPULL);
+ palSetPad(RTS_PORT, RTS_PIN);
+ palClearPad(RTS_PORT, RTS_PIN);
+ _delay_ms(10);
+ palSetPad(RTS_PORT, RTS_PIN);
+ }
+*/
+
+
+ _delay_ms(5);
+ //print("rts\n");
+ return 1;
+}
+
+uint8_t get_serial_byte(void) {
+ static uint8_t code;
+ while(1) {
+ code = serial_recv();
+ if (code) {
+ debug_hex(code); debug(" ");
+ return code;
+ }
+ }
+}
+
+uint8_t palm_handshake(void) {
+ // assumes something has seen DCD go high, we've toggled RTS
+ // and we now need to verify handshake.
+ // listen for up to 4 packets before giving up.
+ // usually I get the sequence FF FA FD
+ static uint8_t codeA=0;
+
+ for (uint8_t i=0; i < 5; i++) {
+ codeA=get_serial_byte();
+ if ( 0xFA == codeA) {
+ if( 0xFD == get_serial_byte()) {
+ return 1;
+ }
+ }
+ }
+ return 0;
+}
+
+uint8_t palm_reset(void) {
+ print("@");
+ rts_reset(); // shouldn't need to power cycle.
+
+ if ( palm_handshake() ) {
+ last_activity = timer_read();
+ return 1;
+ } else {
+ print("failed reset");
+ return 0;
+ }
+
+}
+
+uint8_t handspring_handshake(void) {
+ // should be sent 15 ms after power up.
+ // listen for up to 4 packets before giving up.
+ static uint8_t codeA=0;
+
+ for (uint8_t i=0; i < 5; i++) {
+ codeA=get_serial_byte();
+ if ( 0xF9 == codeA) {
+ if( 0xFB == get_serial_byte()) {
+ return 1;
+ }
+ }
+ }
+ return 0;
+}
+
+uint8_t handspring_reset(void) {
+ digitalWrite(VCC_PIN, PinLevelLow);
+ _delay_ms(5);
+ digitalWrite(VCC_PIN, PinLevelHigh);
+
+ if ( handspring_handshake() ) {
+ last_activity = timer_read();
+ disconnect_counter=0;
+ return 1;
+ } else {
+ print("-HSreset");
+ return 0;
+ }
+}
+
+void matrix_init(void)
+{
+ debug_enable = true;
+ //debug_matrix =true;
+
+ serial_init(); // arguments all #defined
+
+#if (HANDSPRING == 0)
+ pins_init(); // set all inputs and outputs.
+#endif
+
+ print("power up\n");
+ digitalWrite(VCC_PIN, PinLevelHigh);
+
+ // wait for DCD strobe from keyboard - it will do this
+ // up to 3 times, then the board needs the RTS toggled to try again
+
+#if ( HANDSPRING == 1)
+ if ( handspring_handshake() ) {
+ last_activity = timer_read();
+ } else {
+ print("failed handshake");
+ _delay_ms(1000);
+ //BUG /should/ power cycle or toggle RTS & reset, but this usually works.
+ }
+
+#else /// Palm / HP device with DCD
+ while( digitalRead(DCD_PIN) != PinLevelHigh ) {;}
+ print("dcd\n");
+
+ rts_reset(); // at this point the keyboard should think all is well.
+
+ if ( palm_handshake() ) {
+ last_activity = timer_read();
+ } else {
+ print("failed handshake");
+ _delay_ms(1000);
+ //BUG /should/ power cycle or toggle RTS & reset, but this usually works.
+ }
+
+#endif
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+ matrix_init_quantum();
+ return;
+
+
+}
+
+
+uint8_t matrix_scan(void)
+{
+ uint8_t code;
+ code = serial_recv();
+ if (!code) {
+/*
+ disconnect_counter ++;
+ if (disconnect_counter > MAXDROP) {
+ // set all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+ }
+*/
+ // check if the keyboard is asleep.
+ if (timer_elapsed(last_activity) > SLEEP_TIMEOUT) {
+#if(HANDSPRING ==0 )
+ palm_reset();
+#else
+ handspring_reset();
+#endif
+ return 0;
+ }
+
+ }
+
+ last_activity = timer_read();
+ disconnect_counter=0; // if we are getting serial data, we're connected.
+
+ debug_hex(code); debug(" ");
+
+
+ switch (code) {
+ case 0xFD: // unexpected reset byte 2
+ print("rstD ");
+ return 0;
+ case 0xFA: // unexpected reset
+ print("rstA ");
+ return 0;
+ }
+
+ if (KEYUP(code)) {
+ if (code == last_upKey) {
+ // all keys are not pressed.
+ // Manual says to disable all modifiers left open now.
+ // but that could defeat sticky keys.
+ // BUG? dropping this byte.
+ last_upKey=0;
+ return 0;
+ }
+ // release
+ if (matrix_is_on(ROW(code), COL(code))) {
+ matrix[ROW(code)] &= ~(1<<COL(code));
+ last_upKey=code;
+ }
+ } else {
+ // press
+ if (!matrix_is_on(ROW(code), COL(code))) {
+ matrix[ROW(code)] |= (1<<COL(code));
+
+ }
+ }
+
+ matrix_scan_quantum();
+ return code;
+}
+
+bool matrix_is_modified(void)
+{
+ return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+ return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 01234567\n");
+ for (uint8_t row = 0; row < matrix_rows(); row++) {
+ phex(row); print(": ");
+ pbin_reverse(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop(matrix[i]);
+ }
+ return count;
+}
diff --git a/keyboards/converter/palm_usb/readme.md b/keyboards/converter/palm_usb/readme.md
new file mode 100644
index 0000000000..17ba329dad
--- /dev/null
+++ b/keyboards/converter/palm_usb/readme.md
@@ -0,0 +1,96 @@
+# Stowaway Serial keyboard to USB protocol converter
+
+A converter for Palm Pilot era Stowaway serial keyboards.
+
+Makes extensive use of the code from [cy384](https://github.com/cy384/ppk_usb). Ported to QMK by [milestogo](https://github.com/milestogo).
+
+Hardware Supported: See hardware section below
+Hardware Availability: self-built
+
+Make example for this keyboard (after setting up your build environment):
+
+ make converter/palm_usb/stowaway:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+
+## Hardware
+
+Target MCU is ATMega32u4 but other USB capable AVRs should also work.
+
+cy843 has a very specific way of wiring in order to fit all pins in sequence. It breaks
+qmk because the Arduino softserial library uses different pins from QMK.
+
+I've wired the pro micro hardware as follows.
+
+Label| TX0,RX1,GND,GND,2 ,3 ,4 ,5 ,6 ,7
+Palm | , , * ,GND,VCC,RX ,NC ,RTS,nc ,DCD
+MCU | ,D1 ,D0 , ,C6 , ,E6
+
+\* The RX line from the keyboard should be conected to a ~10K ohm pull down resistor to ground.
+RX --|--3
+ 10K
+ |
+ GND
+
+
+Power management is not implemented yet, this just reboots the keyboard frequently.
+
+### Keyboards:
+
+Think Outside Stowaway Keyboards
+There are at least 5 different versions of these keyboards out there.
+
+Group 1: Palm 3, Palm 5 & HP Journada 540, and Compaq iPaq keyboards. These share
+the same RTS protocol, but with different pinouts for each device.
+
+Group 2: Handspring keyboards. These don't do handshaking protocol, and use TTL signal.
+Set HANDSPRING to 1 in config.h
+
+Group 3: IRDA models. Untested but theoretically serial.
+
+### Connectors
+
+See https://github.com/cy384/ppk_usb for wiring & sample 3d printable sockets.
+
+Only Palm3 wiring has been tested.
+RXD pin is output from keyboard to MCU's RX.
+
+Viewed from left to right with the keyboard in typing position.
+
+Palm3: [NC, VCC, RXD, RTS, NC, NC, DCD, NC, NC, GND]
+Palm5: [NC, VCC, RXD, RTS, NC, NC, DCD, NC, NC, GND] (same order, different connector)
+Handspring: [VCC/TXD, NC, NC, NC, GND, NC, NC, RXD]
+Journada: [NC, NC, NC, GND, NC, RTS, NC, DTR/VCC, RXD, DCD, NC] [GND-IN, VCC-IN]
+Ipaq: [NC, NC, DTR/VCC, NC, NC, RTS, NC, RXD, DCD, GND, NC, NC]
+
+### Protocol
+
+ Signal: Asynchronous, Negative logic, 9600baud, No Flow control
+ Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit
+
+ AVR USART engine expects positive logic while stowaway keyboard signal is negative.
+ To use AVR UART engine you need external inverter in front of RX and TX pin.
+ Otherwise you can software serial routine to communicate the keyboard.
+
+This converter uses software method, you doesn't need any inverter part.
+
+
+Commands From System To Keyboard
+ none
+
+Commands From Keyboard To System
+
+ 0xFA Reset/Ready Response(followed by 0xFD)
+
+References
+
+* http://www.splorp.com/pdf/stowawayhwref.pdf
+
+### Todo
+- Test on anything but a palm 3 model keyboard.
+- Change all of the soft serial to match the new Helix based code so that it is easier
+to switch pins.
+- The driver should check for a keyboard that pressed the delete key then disconnected.
+Check every MAXDROP scans that the keyboard is there, and if not, clear the matrix.
+Not implemented yet, since matrix scan is so much faster than serial.
diff --git a/keyboards/converter/palm_usb/rules.mk b/keyboards/converter/palm_usb/rules.mk
new file mode 100644
index 0000000000..35ea3995e6
--- /dev/null
+++ b/keyboards/converter/palm_usb/rules.mk
@@ -0,0 +1,46 @@
+MCU = atmega32u4 # Teensy 2.0
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+BOOTLOADER = caterina
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+UNICODEMAP_ENABLE = no
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+CUSTOM_MATRIX = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+#HARDWARE_SERIAL = yes
+
+SRC += matrix.c
+
+ifdef HARDWARE_SERIAL
+ # untested with palm_usb
+ SRC += protocol/serial_uart.c
+ OPT_DEFS += -DHARDWARE_SERIAL
+else
+ SRC += protocol/serial_soft.c
+endif
+
+DEFAULT_FOLDER = converter/palm_usb/stowaway
+
diff --git a/keyboards/converter/palm_usb/stowaway/keymaps/default/keymap.c b/keyboards/converter/palm_usb/stowaway/keymaps/default/keymap.c
new file mode 100644
index 0000000000..09b41f95cc
--- /dev/null
+++ b/keyboards/converter/palm_usb/stowaway/keymaps/default/keymap.c
@@ -0,0 +1,59 @@
+/*
+ Copyright 2018 milestogo
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+_QWERTY=0,
+_CDH,
+_FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /*
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BACK, APP0,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, APP1,
+ CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, APP2,
+ LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, APP3,
+ LCTL, FN, LALT, CMD, SPACE,SPACE,GRAVE,DONE, DEL, LEFT, DOWN, RIGHT
+
+*/
+ [_QWERTY] = LAYOUT( /* Base */
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, TG(_CDH),
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, MO(_FN), KC_LALT, KC_LGUI, KC_SPACE,KC_SPACE,KC_GRAVE,KC_RGUI, KC_DEL, KC_LEFT,KC_DOWN, KC_RIGHT
+ ),
+
+ [_CDH] = LAYOUT( /* Base */
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC,
+ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, _______,
+ KC_CAPS, KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_PGUP,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+ KC_LCTL, MO(_FN), KC_LALT, KC_LGUI, KC_SPACE,KC_SPACE,KC_GRAVE,KC_RGUI, KC_DEL, KC_LEFT,KC_DOWN, KC_RIGHT
+ ),
+
+ [_FN] = LAYOUT( // FN Key
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, KC_ENT, _______, _______, _______, _______, _______, _______, _______
+ ),
+
+};
diff --git a/keyboards/converter/palm_usb/stowaway/rules.mk b/keyboards/converter/palm_usb/stowaway/rules.mk
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/keyboards/converter/palm_usb/stowaway/rules.mk
diff --git a/keyboards/converter/palm_usb/stowaway/stowaway.h b/keyboards/converter/palm_usb/stowaway/stowaway.h
new file mode 100644
index 0000000000..71af9bf4a8
--- /dev/null
+++ b/keyboards/converter/palm_usb/stowaway/stowaway.h
@@ -0,0 +1,53 @@
+/*
+Copyright 2018 milestogo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+
+/* Stowaway Keyboard
+ based on matrix from http://www.splorp.com/pdf/stowawayhwref.pdf
+
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BACK APP0,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, APP1,
+ CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, APP2,
+ LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, APP3,
+ LCTL, FN, LALT, CMD, SPACE,SPACE,GRAVE,DONE, DEL, LEFT, DOWN, RIGHT
+
+*/
+#define LAYOUT( \
+ K000, K001, K002, K004, K005, K006, K007, K064, K065, K066, K060, K061, K062, K063,\
+ K031, K011, K012, K013, K014, K015, K016, K074, K075, K076, K077, K070, K071, K072, K073,\
+ K030, K021, K022, K023, K024, K025, K026, K084, K085, K086, K087, K080, K081, K082,\
+ K110, K003, K020, K054, K055, K056, K057, K094, K095, K096, K090, K111, K091, K092,\
+ K032, K042, K043, K010, K027, K067, K017, K097, K100, K101, K102, K103 \
+) { \
+ { K000, K001, K002 , K003, K004, K005, K006, K007 }, \
+ { K010, K011, K012 , K013, K014, K015, K016, K017 }, \
+ { K020, K021, K022 , K023, K024, K025, K026, K027 }, \
+ { K030, K031, K032 , KC_NO,KC_NO, KC_NO,KC_NO, KC_NO }, \
+ { KC_NO, KC_NO, K042 , K043, KC_NO, KC_NO,KC_NO, KC_NO }, \
+ { KC_NO, KC_NO, KC_NO, KC_NO,K054, K055, K056, K057 }, \
+ { K060, K061, K062 , K063, K064, K065, K066, K067 }, \
+ { K070, K071, K072 , K073, K074, K075, K076, K077 }, \
+ { K080, K081, K082 , KC_NO,K084, K085, K086, K087 }, \
+ { K090, K091, K092 , KC_NO,K094, K095, K096, K097 }, \
+ { K100, K101, K102 , K103, KC_NO, KC_NO,KC_NO, KC_NO }, \
+ { K110, K111, KC_NO, KC_NO,KC_NO, KC_NO,KC_NO, KC_NO } \
+}
+