summaryrefslogtreecommitdiff
path: root/keyboards
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards')
-rw-r--r--keyboards/handwired/splittest/config.h75
-rw-r--r--keyboards/handwired/splittest/keymaps/default/config.h23
-rw-r--r--keyboards/handwired/splittest/keymaps/default/keymap.c5
-rw-r--r--keyboards/handwired/splittest/readme.md26
-rw-r--r--keyboards/handwired/splittest/rules.mk65
-rw-r--r--keyboards/handwired/splittest/splittest.c1
-rw-r--r--keyboards/handwired/splittest/splittest.h5
7 files changed, 200 insertions, 0 deletions
diff --git a/keyboards/handwired/splittest/config.h b/keyboards/handwired/splittest/config.h
new file mode 100644
index 0000000000..9e4fb38ca0
--- /dev/null
+++ b/keyboards/handwired/splittest/config.h
@@ -0,0 +1,75 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xCB10
+#define PRODUCT_ID 0x1111
+#define DEVICE_VER 0x0100
+#define MANUFACTURER Keebio
+#define PRODUCT Split Tester
+#define DESCRIPTION Split keyboard testing unit
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 1
+
+// wiring of each half
+#define MATRIX_ROW_PINS { B3 }
+#define MATRIX_COL_PINS { B6 }
+#define SPLIT_HAND_PIN F6
+#define SOFT_SERIAL_PIN D1
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLED_SPLIT { 6, 6 }
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
diff --git a/keyboards/handwired/splittest/keymaps/default/config.h b/keyboards/handwired/splittest/keymaps/default/config.h
new file mode 100644
index 0000000000..ecebd36589
--- /dev/null
+++ b/keyboards/handwired/splittest/keymaps/default/config.h
@@ -0,0 +1,23 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define USE_I2C
diff --git a/keyboards/handwired/splittest/keymaps/default/keymap.c b/keyboards/handwired/splittest/keymaps/default/keymap.c
new file mode 100644
index 0000000000..1c15f6f1df
--- /dev/null
+++ b/keyboards/handwired/splittest/keymaps/default/keymap.c
@@ -0,0 +1,5 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT(RGB_MOD, RESET)
+};
diff --git a/keyboards/handwired/splittest/readme.md b/keyboards/handwired/splittest/readme.md
new file mode 100644
index 0000000000..3dbff32ed4
--- /dev/null
+++ b/keyboards/handwired/splittest/readme.md
@@ -0,0 +1,26 @@
+Split Tester
+============
+
+A two-switch tester built using two Pro Micros, mainly intended to test RGB on split keyboards. Seen here: https://www.instagram.com/p/BvCPNzynwrV/
+
+Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges)
+Hardware Supported: Pro Micro
+
+Make example for this keyboard (after setting up your build environment):
+
+ make handwired/splittest:default
+
+Example of flashing this keyboard:
+
+ make handwired/splittest:default:avrdude
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+Wiring
+------
+- Add switches to both Pro Micros across B3 and B6 pins
+- Add pull-up resistor to left side between VCC and F6
+- Add pull-down resistors to right side between GND and F6
+- Connect the following pins on both sides together: D0, D1, GND, VCC
+- Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
+- Wire Di of RGB strip for each half to D2
diff --git a/keyboards/handwired/splittest/rules.mk b/keyboards/handwired/splittest/rules.mk
new file mode 100644
index 0000000000..9512c0f648
--- /dev/null
+++ b/keyboards/handwired/splittest/rules.mk
@@ -0,0 +1,65 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+SPLIT_KEYBOARD = yes
diff --git a/keyboards/handwired/splittest/splittest.c b/keyboards/handwired/splittest/splittest.c
new file mode 100644
index 0000000000..3c919a565d
--- /dev/null
+++ b/keyboards/handwired/splittest/splittest.c
@@ -0,0 +1 @@
+#include "splittest.h"
diff --git a/keyboards/handwired/splittest/splittest.h b/keyboards/handwired/splittest/splittest.h
new file mode 100644
index 0000000000..17b7081a02
--- /dev/null
+++ b/keyboards/handwired/splittest/splittest.h
@@ -0,0 +1,5 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT(L1, R1) {{L1}, {R1}}