diff options
Diffstat (limited to 'keyboards/yosino58')
27 files changed, 100 insertions, 2122 deletions
diff --git a/keyboards/yosino58/.noci b/keyboards/yosino58/.noci deleted file mode 100644 index e69de29bb2..0000000000 --- a/keyboards/yosino58/.noci +++ /dev/null diff --git a/keyboards/yosino58/config.h b/keyboards/yosino58/config.h deleted file mode 100644 index 24831ee5b2..0000000000 --- a/keyboards/yosino58/config.h +++ /dev/null @@ -1,25 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" -#include "serial_config.h" - -#define USE_I2C -#define USE_SERIAL diff --git a/keyboards/yosino58/i2c.c b/keyboards/yosino58/i2c.c deleted file mode 100644 index 4bee5c6398..0000000000 --- a/keyboards/yosino58/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include <util/twi.h> -#include <avr/io.h> -#include <stdlib.h> -#include <avr/interrupt.h> -#include <util/twi.h> -#include <stdbool.h> -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) - lim++; - - // easier way, but will wait slightly longer - // _delay_us(100); -} - -// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK) -void i2c_master_init(void) { - // no prescaler - TWSR = 0; - // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); - - i2c_delay(); - - // check that we started successfully - if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) - return 1; - - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) - return 1; // slave did not acknowledge - else - return 0; // success -} - - -// Finish the i2c transaction. -void i2c_master_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); - - uint16_t lim = 0; - while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) - lim++; -} - -// Write one byte to the i2c slave. -// returns 0 => slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - // check if the slave acknowledged us - return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; -} - -// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, -// if ack=0 the acknowledge bit is not set. -// returns: byte read from i2c device -uint8_t i2c_master_read(int ack) { - TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); - - i2c_delay(); - return TWDR; -} - -void i2c_reset_state(void) { - TWCR = 0; -} - -void i2c_slave_init(uint8_t address) { - TWAR = address << 0; // slave i2c address - // TWEN - twi enable - // TWEA - enable address acknowledgement - // TWINT - twi interrupt flag - // TWIE - enable the twi interrupt - TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); -} - -ISR(TWI_vect); - -ISR(TWI_vect) { - uint8_t ack = 1; - switch(TW_STATUS) { - case TW_SR_SLA_ACK: - // this device has been addressed as a slave receiver - slave_has_register_set = false; - break; - - case TW_SR_DATA_ACK: - // this device has received data as a slave receiver - // The first byte that we receive in this transaction sets the location - // of the read/write location of the slaves memory that it exposes over - // i2c. After that, bytes will be written at slave_buffer_pos, incrementing - // slave_buffer_pos after each write. - if(!slave_has_register_set) { - slave_buffer_pos = TWDR; - // don't acknowledge the master if this memory loctaion is out of bounds - if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); -} -#endif diff --git a/keyboards/yosino58/i2c.h b/keyboards/yosino58/i2c.h deleted file mode 100644 index 710662c7ab..0000000000 --- a/keyboards/yosino58/i2c.h +++ /dev/null @@ -1,46 +0,0 @@ -#pragma once - -#include <stdint.h> - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency 400kHz -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); diff --git a/keyboards/yosino58/keymaps/default/config.h b/keyboards/yosino58/keymaps/default/config.h index 21fc2d3b54..aa3caa3d06 100644 --- a/keyboards/yosino58/keymaps/default/config.h +++ b/keyboards/yosino58/keymaps/default/config.h @@ -20,17 +20,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -//#define USE_MATRIX_I2C - /* Select hand configuration */ #define MASTER_LEFT // #define MASTER_RIGHT // #define EE_HANDS -#define SSD1306OLED -// #define SSD1306_128X64 - #define TAPPING_FORCE_HOLD #define TAPPING_TERM 100 @@ -40,4 +35,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_LIMIT_VAL 120 #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17
\ No newline at end of file +#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/yosino58/keymaps/default/keymap.c b/keyboards/yosino58/keymaps/default/keymap.c index 3200d14708..00a6c8e83f 100644 --- a/keyboards/yosino58/keymaps/default/keymap.c +++ b/keyboards/yosino58/keymaps/default/keymap.c @@ -1,20 +1,10 @@ #include QMK_KEYBOARD_H -#ifdef PROTOCOL_LUFA - #include "lufa.h" - #include "split_util.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - #ifdef RGBLIGHT_ENABLE //Following line allows macro to read current RGB settings extern rgblight_config_t rgblight_config; #endif -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -25,8 +15,7 @@ extern uint8_t is_master; #define _ADJUST 3 enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, + LOWER = SAFE_RANGE, RAISE, ADJUST, RGBRST @@ -126,11 +115,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { int RGB_current_mode; -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - // Setting ADJUST layer RGB back to default void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { @@ -144,18 +128,9 @@ void matrix_init_user(void) { #ifdef RGBLIGHT_ENABLE RGB_current_mode = rgblight_config.mode; #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - #ifdef SSD1306_128X64 - iota_gfx_init(false); // turns on the display - #else - iota_gfx_init(!has_usb()); // turns on the display - #endif - #endif } -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED +#ifdef OLED_ENABLE //assign the right code to your layers for OLED display #define L_QWERTY 0 @@ -166,12 +141,8 @@ void matrix_init_user(void) { // When add source files to SRC in rules.mk, you can use functions. const char *read_logo(void); -void matrix_scan_user(void) { - iota_gfx_task(); -} - -void matrix_render_user(struct CharacterMatrix *matrix) { - if (is_master) { +bool oled_task_user(void) { + if (is_keyboard_master()) { static char indctr[2][20][5]= { // white icon @@ -235,58 +206,40 @@ void matrix_render_user(struct CharacterMatrix *matrix) { if (layer_state == L_RAISE) { rowr = 1; } if (layer_state == L_ADJUST) { rowa = 1; } - matrix_write(matrix, indctr[rowl] [0]); - matrix_write(matrix, indctr[rowr] [1]); - matrix_write(matrix, indctr[rowa] [2]); - matrix_write(matrix, indctr[rowc] [3]); - matrix_write(matrix, indctr[rown] [4]); - matrix_write_char(matrix, 0x13); - matrix_write(matrix, indctr[rowl] [5]); - matrix_write(matrix, indctr[rowr] [6]); - matrix_write(matrix, indctr[rowa] [7]); - matrix_write(matrix, indctr[rowc] [8]); - matrix_write(matrix, indctr[rown] [9]); - matrix_write_char(matrix, 0x13); - matrix_write(matrix, indctr[rowl] [10]); - matrix_write(matrix, indctr[rowr] [11]); - matrix_write(matrix, indctr[rowa] [12]); - matrix_write(matrix, indctr[rowc] [13]); - matrix_write(matrix, indctr[rown] [14]); - matrix_write_char(matrix, 0x13); - matrix_write(matrix, indctr[rowl] [15]); - matrix_write(matrix, indctr[rowr] [16]); - matrix_write(matrix, indctr[rowa] [17]); - matrix_write(matrix, indctr[rowc] [18]); - matrix_write(matrix, indctr[rown] [19]); + oled_write(indctr[rowl] [0], false); + oled_write(indctr[rowr] [1], false); + oled_write(indctr[rowa] [2], false); + oled_write(indctr[rowc] [3], false); + oled_write(indctr[rown] [4], false); + oled_write_char(0x13, false); + oled_write(indctr[rowl] [5], false); + oled_write(indctr[rowr] [6], false); + oled_write(indctr[rowa] [7], false); + oled_write(indctr[rowc] [8], false); + oled_write(indctr[rown] [9], false); + oled_write_char(0x13, false); + oled_write(indctr[rowl] [10], false); + oled_write(indctr[rowr] [11], false); + oled_write(indctr[rowa] [12], false); + oled_write(indctr[rowc] [13], false); + oled_write(indctr[rown] [14], false); + oled_write_char(0x13, false); + oled_write(indctr[rowl] [15], false); + oled_write(indctr[rowr] [16], false); + oled_write(indctr[rowa] [17], false); + oled_write(indctr[rowc] [18], false); + oled_write(indctr[rown] [19], false); }else{ - matrix_write(matrix, read_logo()); + oled_write(read_logo(), false); } + return false; } -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - matrix_render_user(&matrix); - matrix_update(&display, &matrix); -} -#endif//SSD1306OLED +#endif bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { - case QWERTY: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; case LOWER: if (record->event.pressed) { layer_on(_LOWER); diff --git a/keyboards/yosino58/keymaps/default/rules.mk b/keyboards/yosino58/keymaps/default/rules.mk index 88c202edb0..191140d278 100644 --- a/keyboards/yosino58/keymaps/default/rules.mk +++ b/keyboards/yosino58/keymaps/default/rules.mk @@ -1,5 +1,6 @@ EXTRAKEY_ENABLE = yes RGBLIGHT_ENABLE = yes +OLED_ENABLE = yes # If you want to change the display of OLED, you need to change here SRC += ./lib/glcdfont.c \ diff --git a/keyboards/yosino58/keymaps/sakura/config.h b/keyboards/yosino58/keymaps/sakura/config.h index 64962b0d20..b80d37d457 100644 --- a/keyboards/yosino58/keymaps/sakura/config.h +++ b/keyboards/yosino58/keymaps/sakura/config.h @@ -20,16 +20,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once -//#define USE_MATRIX_I2C - /* Select hand configuration */ // #define MASTER_LEFT #define MASTER_RIGHT // #define EE_HANDS -#define SSD1306OLED -#define SSD1306_128X64 +#define OLED_DISPLAY_128X64 #define TAPPING_FORCE_HOLD #define TAPPING_TERM 100 diff --git a/keyboards/yosino58/keymaps/sakura/keymap.c b/keyboards/yosino58/keymaps/sakura/keymap.c index 0996f0e4e7..6979539d33 100644 --- a/keyboards/yosino58/keymaps/sakura/keymap.c +++ b/keyboards/yosino58/keymaps/sakura/keymap.c @@ -1,21 +1,10 @@ #include QMK_KEYBOARD_H -#ifdef PROTOCOL_LUFA - #include "lufa.h" - #include "split_util.h" -#endif -#ifdef SSD1306OLED - #include "ssd1306.h" -#endif - -extern keymap_config_t keymap_config; #ifdef RGBLIGHT_ENABLE //Following line allows macro to read current RGB settings extern rgblight_config_t rgblight_config; #endif -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -26,8 +15,7 @@ extern uint8_t is_master; #define _ADJUST 3 enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, + LOWER = SAFE_RANGE, RAISE, ADJUST, RGBRST @@ -60,11 +48,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------. ,-----------------------------------------. * | ESC | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | | * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Tab | / | - | 7 | 8 | 9 | | PSCR | SLCK | Pause| | | | + * | Tab | / | - | 7 | 8 | 9 | | PSCR | SLCK | Pause| | �� | | * |------+------+------+------+------+------| |------+------+------+------+------+------| - * |LShift| * | + | 4 | 5 | 6 | |Insert| Home |PageUP| | | | + * |LShift| * | + | 4 | 5 | 6 | |Insert| Home |PageUP| | �� | �� | * |------+------+------+------+------+------| |------+------+------+------+------+------| - * |LCTRL | . | 0 | 1 | 2 | 3 |-------.-------. ,---------------| Del | End |PageDN| | Num | Caps | + * |LCTRL | . | 0 | 1 | 2 | 3 |-------.-------. ,---------------| Del | End |PageDN| �� | Num | Caps | * `-----------------------------------------/ F11 / / \ \ F12 \----------------------------------------' * | LAlt | LGUI | /-------/ Space / \ Enter \-------\ | | | * | | |/ LOWER / / \ \ \ | | | @@ -80,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* RAISE * ,-----------------------------------------. ,-----------------------------------------. - * |RESET | | | | | | | Mute | Vol+ | Play | | | | + * |QK_BOOT | | | | | | | Mute | Vol+ | Play | | | | * |------+------+------+------+------+------| |------+------+------+------+------+------| * | | | | | | | | Prev | Vol- | Next | | | | * |------+------+------+------+------+------| |------+------+------+------+------+------| @@ -93,7 +81,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------' '------------------------------' */ [_RAISE] = LAYOUT( \ - RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, KC_VOLU, KC_MPLY, XXXXXXX, XXXXXXX, XXXXXXX, \ + QK_BOOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, KC_VOLU, KC_MPLY, XXXXXXX, XXXXXXX, XXXXXXX, \ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MPRV, KC_VOLD, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, \ XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, KC_WH_L, XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, KC_WH_R, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, RGBRST, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \ @@ -102,7 +90,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* ADJUST * ,-----------------------------------------. ,-----------------------------------------. - * |RESET | | | | | | | | | | | | | + * |QK_BOOT | | | | | | | | | | | | | * |------+------+------+------+------+------| |------+------+------+------+------+------| * | | | | | | | | | | | | | | * |------+------+------+------+------+------| |------+------+------+------+------+------| @@ -115,7 +103,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------' '------------------------------' [_ADJUST] = LAYOUT( \ - RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + QK_BOOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ @@ -127,11 +115,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { int RGB_current_mode; -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - // Setting ADJUST layer RGB back to default void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { @@ -145,18 +128,9 @@ void matrix_init_user(void) { #ifdef RGBLIGHT_ENABLE RGB_current_mode = rgblight_config.mode; #endif - //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h - #ifdef SSD1306OLED - #ifdef SSD1306_128X64 - iota_gfx_init(false); // turns on the display - #else - iota_gfx_init(!has_usb()); // turns on the display - #endif - #endif } -//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h -#ifdef SSD1306OLED +#ifdef OLED_ENABLE //assign the right code to your layers for OLED display #define L_QWERTY 0 @@ -167,12 +141,8 @@ void matrix_init_user(void) { // When add source files to SRC in rules.mk, you can use functions. const char *read_logo(void); -void matrix_scan_user(void) { - iota_gfx_task(); -} - -void matrix_render_user(struct CharacterMatrix *matrix) { - if (is_master) { +bool oled_task_user(void) { + if (is_keyboard_master()) { static char indctr[2][20][5]= { // white icon @@ -236,58 +206,40 @@ void matrix_render_user(struct CharacterMatrix *matrix) { if (layer_state == L_RAISE) { rowr = 1; } if (layer_state == L_ADJUST) { rowa = 1; } - matrix_write(matrix, indctr[rowl] [0]); - matrix_write(matrix, indctr[rowr] [1]); - matrix_write(matrix, indctr[rowa] [2]); - matrix_write(matrix, indctr[rowc] [3]); - matrix_write(matrix, indctr[rown] [4]); - matrix_write_char(matrix, 0x13); - matrix_write(matrix, indctr[rowl] [5]); - matrix_write(matrix, indctr[rowr] [6]); - matrix_write(matrix, indctr[rowa] [7]); - matrix_write(matrix, indctr[rowc] [8]); - matrix_write(matrix, indctr[rown] [9]); - matrix_write_char(matrix, 0x13); - matrix_write(matrix, indctr[rowl] [10]); - matrix_write(matrix, indctr[rowr] [11]); - matrix_write(matrix, indctr[rowa] [12]); - matrix_write(matrix, indctr[rowc] [13]); - matrix_write(matrix, indctr[rown] [14]); - matrix_write_char(matrix, 0x13); - matrix_write(matrix, indctr[rowl] [15]); - matrix_write(matrix, indctr[rowr] [16]); - matrix_write(matrix, indctr[rowa] [17]); - matrix_write(matrix, indctr[rowc] [18]); - matrix_write(matrix, indctr[rown] [19]); + oled_write(indctr[rowl] [0], false); + oled_write(indctr[rowr] [1], false); + oled_write(indctr[rowa] [2], false); + oled_write(indctr[rowc] [3], false); + oled_write(indctr[rown] [4], false); + oled_write_char(0x13, false); + oled_write(indctr[rowl] [5], false); + oled_write(indctr[rowr] [6], false); + oled_write(indctr[rowa] [7], false); + oled_write(indctr[rowc] [8], false); + oled_write(indctr[rown] [9], false); + oled_write_char(0x13, false); + oled_write(indctr[rowl] [10], false); + oled_write(indctr[rowr] [11], false); + oled_write(indctr[rowa] [12], false); + oled_write(indctr[rowc] [13], false); + oled_write(indctr[rown] [14], false); + oled_write_char(0x13, false); + oled_write(indctr[rowl] [15], false); + oled_write(indctr[rowr] [16], false); + oled_write(indctr[rowa] [17], false); + oled_write(indctr[rowc] [18], false); + oled_write(indctr[rown] [19], false); }else{ - matrix_write(matrix, read_logo()); + oled_write(read_logo(), false); } + return false; } -void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { - if (memcmp(dest->display, source->display, sizeof(dest->display))) { - memcpy(dest->display, source->display, sizeof(dest->display)); - dest->dirty = true; - } -} - -void iota_gfx_task_user(void) { - struct CharacterMatrix matrix; - matrix_clear(&matrix); - matrix_render_user(&matrix); - matrix_update(&display, &matrix); -} -#endif//SSD1306OLED +#endif bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { - case QWERTY: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; case LOWER: if (record->event.pressed) { layer_on(_LOWER); diff --git a/keyboards/yosino58/keymaps/sakura/rules.mk b/keyboards/yosino58/keymaps/sakura/rules.mk index 0b2ca1ba59..679c8c155d 100644 --- a/keyboards/yosino58/keymaps/sakura/rules.mk +++ b/keyboards/yosino58/keymaps/sakura/rules.mk @@ -15,6 +15,7 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing +OLED_ENABLE = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/yosino58/rev1/.noci b/keyboards/yosino58/rev1/.noci deleted file mode 100644 index e69de29bb2..0000000000 --- a/keyboards/yosino58/rev1/.noci +++ /dev/null diff --git a/keyboards/yosino58/rev1/config.h b/keyboards/yosino58/rev1/config.h index 1ff856c8d8..13f69f18c9 100644 --- a/keyboards/yosino58/rev1/config.h +++ b/keyboards/yosino58/rev1/config.h @@ -18,6 +18,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once +#include "config_common.h" + /* key matrix size */ // Rows are doubled-up #define MATRIX_ROWS 10 @@ -26,6 +28,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // wiring of each half #define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } +#define DIODE_DIRECTION COL2ROW /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST @@ -36,6 +39,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 + /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/yosino58/rev1/matrix.c b/keyboards/yosino58/rev1/matrix.c deleted file mode 100644 index 802ce00cc6..0000000000 --- a/keyboards/yosino58/rev1/matrix.c +++ /dev/null @@ -1,343 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <string.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "quantum.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "split_scomm.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; -uint8_t is_master = 0 ; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - setPinOutput(B0); - setPinOutput(D5); - writePinHigh(D5); - writePinHigh(B0); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - is_master = has_usb(); - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_MATRIX_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(int master_changed) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; -#ifdef SERIAL_USE_MULTI_TRANSACTION - int ret=serial_update_buffers(master_changed); -#else - int ret=serial_update_buffers(); -#endif - if (ret ) { - if(ret==2) writePinLow(B0); - return 1; - } - writePinHigh(B0); - memcpy(&matrix[slaveOffset], - (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH); - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - if (is_master) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - memcpy(&matrix[offset], - (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH); - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - int mchanged = 1; - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C -// for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ -// i2c_slave_buffer[i] = matrix[offset+i]; -// } -#else // USE_SERIAL - #ifdef SERIAL_USE_MULTI_TRANSACTION - mchanged = memcmp((void *)serial_master_buffer, - &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); - #endif - memcpy((void *)serial_master_buffer, - &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); -#endif - -#ifdef USE_MATRIX_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction(mchanged) ) { -#endif - // turn on the indicator led when halves are disconnected - writePinLow(D5); - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - writePinHigh(D5); - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_MATRIX_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - #ifdef SERIAL_USE_MULTI_TRANSACTION - int change = 0; - #endif - for (int i = 0; i < ROWS_PER_HAND; ++i) { - #ifdef SERIAL_USE_MULTI_TRANSACTION - if( serial_slave_buffer[i] != matrix[offset+i] ) - change = 1; - #endif - serial_slave_buffer[i] = matrix[offset+i]; - } - #ifdef SERIAL_USE_MULTI_TRANSACTION - slave_buffer_change_count += change; - #endif -#endif -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_bin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/yosino58/rev1/rev1.h b/keyboards/yosino58/rev1/rev1.h index bc68892e88..c643c9d729 100644 --- a/keyboards/yosino58/rev1/rev1.h +++ b/keyboards/yosino58/rev1/rev1.h @@ -1,22 +1,7 @@ #pragma once -#include "../yosino58.h" - #include "quantum.h" -#ifdef RGBLIGHT_ENABLE -//rgb led driver -#include "ws2812.h" -#endif - -#ifdef USE_I2C -#include <stddef.h> -#ifdef __AVR__ - #include <avr/io.h> - #include <avr/interrupt.h> -#endif -#endif - #define LAYOUT( \ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ diff --git a/keyboards/yosino58/rev1/rules.mk b/keyboards/yosino58/rev1/rules.mk index 6028b5a5b9..cf39e83a4f 100644 --- a/keyboards/yosino58/rev1/rules.mk +++ b/keyboards/yosino58/rev1/rules.mk @@ -1,3 +1,20 @@ -SRC += rev1/matrix.c -SRC += rev1/split_util.c -SRC += rev1/split_scomm.c +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SPLIT_KEYBOARD = yes +OLED_DRIVER = SSD1306 diff --git a/keyboards/yosino58/rev1/serial_config.h b/keyboards/yosino58/rev1/serial_config.h deleted file mode 100644 index 4fab8e8ddf..0000000000 --- a/keyboards/yosino58/rev1/serial_config.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef SOFT_SERIAL_PIN -#define SOFT_SERIAL_PIN D2 -#define SERIAL_USE_MULTI_TRANSACTION -#endif diff --git a/keyboards/yosino58/rev1/serial_config_simpleapi.h b/keyboards/yosino58/rev1/serial_config_simpleapi.h deleted file mode 100644 index 0e1dd9e4ac..0000000000 --- a/keyboards/yosino58/rev1/serial_config_simpleapi.h +++ /dev/null @@ -1,5 +0,0 @@ -#pragma once - -#undef SERIAL_USE_MULTI_TRANSACTION -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 diff --git a/keyboards/yosino58/rev1/split_scomm.c b/keyboards/yosino58/rev1/split_scomm.c deleted file mode 100644 index 82b53d7e7f..0000000000 --- a/keyboards/yosino58/rev1/split_scomm.c +++ /dev/null @@ -1,91 +0,0 @@ -#ifdef USE_SERIAL -#ifdef SERIAL_USE_MULTI_TRANSACTION -/* --- USE flexible API (using multi-type transaction function) --- */ - -#include <stdbool.h> -#include <stdint.h> -#include <stddef.h> -#include "split_scomm.h" -#include "serial.h" -#ifdef CONSOLE_ENABLE - #include "print.h" -#endif - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; -uint8_t volatile status_com = 0; -uint8_t volatile status1 = 0; -uint8_t slave_buffer_change_count = 0; -uint8_t s_change_old = 0xff; -uint8_t s_change_new = 0xff; - -SSTD_t transactions[] = { -#define GET_SLAVE_STATUS 0 - /* master buffer not changed, only recive slave_buffer_change_count */ - { (uint8_t *)&status_com, - 0, NULL, - sizeof(slave_buffer_change_count), &slave_buffer_change_count, - }, -#define PUT_MASTER_GET_SLAVE_STATUS 1 - /* master buffer changed need send, and recive slave_buffer_change_count */ - { (uint8_t *)&status_com, - sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, - sizeof(slave_buffer_change_count), &slave_buffer_change_count, - }, -#define GET_SLAVE_BUFFER 2 - /* recive serial_slave_buffer */ - { (uint8_t *)&status1, - 0, NULL, - sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer - } -}; - -void serial_master_init(void) -{ - soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); -} - -void serial_slave_init(void) -{ - soft_serial_target_init(transactions, TID_LIMIT(transactions)); -} - -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers(int master_update) -{ - int status, smatstatus; - static int need_retry = 0; - - if( s_change_old != s_change_new ) { - smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); - if( smatstatus == TRANSACTION_END ) { - s_change_old = s_change_new; -#ifdef CONSOLE_ENABLE - uprintf("slave matrix = %b %b %b %b\n", - serial_slave_buffer[0], serial_slave_buffer[1], - serial_slave_buffer[2], serial_slave_buffer[3]); -#endif - } - } else { - // serial_slave_buffer dosen't change - smatstatus = TRANSACTION_END; // dummy status - } - - if( !master_update && !need_retry) { - status = soft_serial_transaction(GET_SLAVE_STATUS); - } else { - status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); - } - if( status == TRANSACTION_END ) { - s_change_new = slave_buffer_change_count; - need_retry = 0; - } else { - need_retry = 1; - } - return smatstatus; -} - -#endif // SERIAL_USE_MULTI_TRANSACTION -#endif /* USE_SERIAL */ diff --git a/keyboards/yosino58/rev1/split_scomm.h b/keyboards/yosino58/rev1/split_scomm.h deleted file mode 100644 index 16887eb74f..0000000000 --- a/keyboards/yosino58/rev1/split_scomm.h +++ /dev/null @@ -1,21 +0,0 @@ -#pragma once - -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */ -#include "serial.h" - -#else -/* --- USE flexible API (using multi-type transaction function) --- */ -// Buffers for master - slave communication -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; -extern uint8_t slave_buffer_change_count; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(int master_changed); - -#endif diff --git a/keyboards/yosino58/rev1/split_util.c b/keyboards/yosino58/rev1/split_util.c deleted file mode 100644 index e1ff8b4379..0000000000 --- a/keyboards/yosino58/rev1/split_util.c +++ /dev/null @@ -1,70 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" - -#ifdef USE_MATRIX_I2C -# include "i2c.h" -#else -# include "split_scomm.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_master_init(); -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { - -#ifdef USE_MATRIX_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); -} diff --git a/keyboards/yosino58/rev1/split_util.h b/keyboards/yosino58/rev1/split_util.h deleted file mode 100644 index f593047560..0000000000 --- a/keyboards/yosino58/rev1/split_util.h +++ /dev/null @@ -1,16 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); - -void matrix_master_OLED_init (void); diff --git a/keyboards/yosino58/rules.mk b/keyboards/yosino58/rules.mk index 3d0f6b19e5..c700b6f5b5 100644 --- a/keyboards/yosino58/rules.mk +++ b/keyboards/yosino58/rules.mk @@ -1,28 +1 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = caterina - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SUBPROJECT_rev1 = no -USE_I2C = yes - -CUSTOM_MATRIX = yes - DEFAULT_FOLDER = yosino58/rev1 - -SRC += i2c.c -SRC += serial.c -SRC += ssd1306.c diff --git a/keyboards/yosino58/serial.c b/keyboards/yosino58/serial.c deleted file mode 100644 index f6293c3dc2..0000000000 --- a/keyboards/yosino58/serial.c +++ /dev/null @@ -1,589 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - * - * 2018-10-28 checked - * avr-gcc 4.9.2 - * avr-gcc 5.4.0 - * avr-gcc 7.3.0 - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stddef.h> -#include <stdbool.h> -#include "serial.h" - -#ifdef SOFT_SERIAL_PIN - -#ifdef __AVR_ATmega32U4__ - // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. - #ifdef USE_I2C - #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 - #error Using ATmega32U4 I2C, so can not use PD0, PD1 - #endif - #endif - - #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 - #define SERIAL_PIN_DDR DDRD - #define SERIAL_PIN_PORT PORTD - #define SERIAL_PIN_INPUT PIND - #if SOFT_SERIAL_PIN == D0 - #define SERIAL_PIN_MASK _BV(PD0) - #define EIMSK_BIT _BV(INT0) - #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) - #define SERIAL_PIN_INTERRUPT INT0_vect - #elif SOFT_SERIAL_PIN == D1 - #define SERIAL_PIN_MASK _BV(PD1) - #define EIMSK_BIT _BV(INT1) - #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) - #define SERIAL_PIN_INTERRUPT INT1_vect - #elif SOFT_SERIAL_PIN == D2 - #define SERIAL_PIN_MASK _BV(PD2) - #define EIMSK_BIT _BV(INT2) - #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) - #define SERIAL_PIN_INTERRUPT INT2_vect - #elif SOFT_SERIAL_PIN == D3 - #define SERIAL_PIN_MASK _BV(PD3) - #define EIMSK_BIT _BV(INT3) - #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) - #define SERIAL_PIN_INTERRUPT INT3_vect - #endif - #elif SOFT_SERIAL_PIN == E6 - #define SERIAL_PIN_DDR DDRE - #define SERIAL_PIN_PORT PORTE - #define SERIAL_PIN_INPUT PINE - #define SERIAL_PIN_MASK _BV(PE6) - #define EIMSK_BIT _BV(INT6) - #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) - #define SERIAL_PIN_INTERRUPT INT6_vect - #else - #error invalid SOFT_SERIAL_PIN value - #endif - -#else - #error serial.c now support ATmega32U4 only -#endif - -//////////////// for backward compatibility //////////////////////////////// -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ - #if SERIAL_SLAVE_BUFFER_LENGTH > 0 - uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; - #endif - #if SERIAL_MASTER_BUFFER_LENGTH > 0 - uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - #endif - uint8_t volatile status0 = 0; - -SSTD_t transactions[] = { - { (uint8_t *)&status0, - #if SERIAL_MASTER_BUFFER_LENGTH > 0 - sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, - #else - 0, (uint8_t *)NULL, - #endif - #if SERIAL_SLAVE_BUFFER_LENGTH > 0 - sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer - #else - 0, (uint8_t *)NULL, - #endif - } -}; - -void serial_master_init(void) -{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } - -void serial_slave_init(void) -{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } - -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers() -{ - int result; - result = soft_serial_transaction(); - return result; -} - -#endif // end of Simple API (OLD API, compatible with let's split serial.c) -//////////////////////////////////////////////////////////////////////////// - -#define ALWAYS_INLINE __attribute__((always_inline)) -#define NO_INLINE __attribute__((noinline)) -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// parity check -#define ODD_PARITY 1 -#define EVEN_PARITY 0 -#define PARITY EVEN_PARITY - -#ifdef SERIAL_DELAY - // custom setup in config.h - // #define TID_SEND_ADJUST 2 - // #define SERIAL_DELAY 6 // micro sec - // #define READ_WRITE_START_ADJUST 30 // cycles - // #define READ_WRITE_WIDTH_ADJUST 8 // cycles -#else -// ============ Standard setups ============ - -#ifndef SELECT_SOFT_SERIAL_SPEED -#define SELECT_SOFT_SERIAL_SPEED 1 -// 0: about 189kbps -// 1: about 137kbps (default) -// 2: about 75kbps -// 3: about 39kbps -// 4: about 26kbps -// 5: about 20kbps -#endif - -#if __GNUC__ < 6 - #define TID_SEND_ADJUST 14 -#else - #define TID_SEND_ADJUST 2 -#endif - -#if SELECT_SOFT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 34 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 36 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 5 - // Ultra Low speed - #define SERIAL_DELAY 48 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#else -#error invalid SELECT_SOFT_SERIAL_SPEED value -#endif /* SELECT_SOFT_SERIAL_SPEED */ -#endif /* SERIAL_DELAY */ - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH_US 1 -#ifndef SERIAL_USE_MULTI_TRANSACTION - #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY -#else - #define SLAVE_INT_ACK_WIDTH_UNIT 2 - #define SLAVE_INT_ACK_WIDTH 4 -#endif - -static SSTD_t *Transaction_table = NULL; -static uint8_t Transaction_table_size = 0; - -inline static void serial_delay(void) ALWAYS_INLINE; -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static void serial_delay_half1(void) ALWAYS_INLINE; -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static void serial_delay_half2(void) ALWAYS_INLINE; -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static void serial_output(void) ALWAYS_INLINE; -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static void serial_input_with_pullup(void) ALWAYS_INLINE; -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static void serial_low(void) ALWAYS_INLINE; -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static void serial_high(void) ALWAYS_INLINE; -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_output(); - serial_high(); -} - -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_input_with_pullup(); - - // Enable INT0-INT3,INT6 - EIMSK |= EIMSK_BIT; -#if SERIAL_PIN_MASK == _BV(PE6) - // Trigger on falling edge of INT6 - EICRB &= EICRx_BIT; -#else - // Trigger on falling edge of INT0-INT3 - EICRA &= EICRx_BIT; -#endif -} - -// Used by the sender to synchronize timing with the reciver. -static void sync_recv(void) NO_INLINE; -static -void sync_recv(void) { - for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the target disconnects because the - // serial line will float to high if the target does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static void sync_send(void) NO_INLINE; -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { - uint8_t byte, i, p, pb; - - _delay_sub_us(READ_WRITE_START_ADJUST); - for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { - serial_delay_half1(); // read the middle of pulses - if( serial_read_pin() ) { - byte = (byte << 1) | 1; p ^= 1; - } else { - byte = (byte << 1) | 0; p ^= 0; - } - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - /* recive parity bit */ - serial_delay_half1(); // read the middle of pulses - pb = serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - - *pterrcount += (p != pb)? 1 : 0; - - return byte; -} - -// Sends a byte with MSB ordering -void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; -void serial_write_chunk(uint8_t data, uint8_t bit) { - uint8_t b, p; - for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { - if(data & b) { - serial_high(); p ^= 1; - } else { - serial_low(); p ^= 0; - } - serial_delay(); - } - /* send parity bit */ - if(p & 1) { serial_high(); } - else { serial_low(); } - serial_delay(); - - serial_low(); // sync_send() / senc_recv() need raise edge -} - -static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -void serial_send_packet(uint8_t *buffer, uint8_t size) { - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - data = buffer[i]; - sync_send(); - serial_write_chunk(data,8); - } -} - -static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { - uint8_t pecount = 0; - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - sync_recv(); - data = serial_read_chunk(&pecount, 8); - buffer[i] = data; - } - return pecount == 0; -} - -inline static -void change_sender2reciver(void) { - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 -} - -inline static -void change_reciver2sender(void) { - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); //3 - serial_delay_half1(); //4 -} - -static inline uint8_t nibble_bits_count(uint8_t bits) -{ - bits = (bits & 0x5) + (bits >> 1 & 0x5); - bits = (bits & 0x3) + (bits >> 2 & 0x3); - return bits; -} - -// interrupt handle to be used by the target device -ISR(SERIAL_PIN_INTERRUPT) { - -#ifndef SERIAL_USE_MULTI_TRANSACTION - serial_low(); - serial_output(); - SSTD_t *trans = Transaction_table; -#else - // recive transaction table index - uint8_t tid, bits; - uint8_t pecount = 0; - sync_recv(); - bits = serial_read_chunk(&pecount,7); - tid = bits>>3; - bits = (bits&7) != nibble_bits_count(tid); - if( bits || pecount> 0 || tid > Transaction_table_size ) { - return; - } - serial_delay_half1(); - - serial_high(); // response step1 low->high - serial_output(); - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); - SSTD_t *trans = &Transaction_table[tid]; - serial_low(); // response step2 ack high->low -#endif - - // target send phase - if( trans->target2initiator_buffer_size > 0 ) - serial_send_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size); - // target switch to input - change_sender2reciver(); - - // target recive phase - if( trans->initiator2target_buffer_size > 0 ) { - if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size) ) { - *trans->status = TRANSACTION_ACCEPTED; - } else { - *trans->status = TRANSACTION_DATA_ERROR; - } - } else { - *trans->status = TRANSACTION_ACCEPTED; - } - - sync_recv(); //weit initiator output to high -} - -///////// -// start transaction by initiator -// -// int soft_serial_transaction(int sstd_index) -// -// Returns: -// TRANSACTION_END -// TRANSACTION_NO_RESPONSE -// TRANSACTION_DATA_ERROR -// this code is very time dependent, so we need to disable interrupts -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void) { - SSTD_t *trans = Transaction_table; -#else -int soft_serial_transaction(int sstd_index) { - if( sstd_index > Transaction_table_size ) - return TRANSACTION_TYPE_ERROR; - SSTD_t *trans = &Transaction_table[sstd_index]; -#endif - cli(); - - // signal to the target that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH_US); - -#ifndef SERIAL_USE_MULTI_TRANSACTION - // wait for the target response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the target is present - if (serial_read_pin()) { - // target failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - -#else - // send transaction table index - int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); - sync_send(); - _delay_sub_us(TID_SEND_ADJUST); - serial_write_chunk(tid, 7); - serial_delay_half1(); - - // wait for the target response (step1 low->high) - serial_input_with_pullup(); - while( !serial_read_pin() ) { - _delay_sub_us(2); - } - - // check if the target is present (step2 high->low) - for( int i = 0; serial_read_pin(); i++ ) { - if (i > SLAVE_INT_ACK_WIDTH + 1) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); - } -#endif - - // initiator recive phase - // if the target is present syncronize with it - if( trans->target2initiator_buffer_size > 0 ) { - if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size) ) { - serial_output(); - serial_high(); - *trans->status = TRANSACTION_DATA_ERROR; - sei(); - return TRANSACTION_DATA_ERROR; - } - } - - // initiator switch to output - change_reciver2sender(); - - // initiator send phase - if( trans->initiator2target_buffer_size > 0 ) { - serial_send_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size); - } - - // always, release the line when not in use - sync_send(); - - *trans->status = TRANSACTION_END; - sei(); - return TRANSACTION_END; -} - -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index) { - SSTD_t *trans = &Transaction_table[sstd_index]; - cli(); - int retval = *trans->status; - *trans->status = 0;; - sei(); - return retval; -} -#endif - -#endif - -// Helix serial.c history -// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) -// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) -// (adjusted with avr-gcc 4.9.2) -// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) -// (adjusted with avr-gcc 4.9.2) -// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) -// (adjusted with avr-gcc 4.9.2) -// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) -// (adjusted with avr-gcc 7.3.0) -// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) -// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/yosino58/serial.h b/keyboards/yosino58/serial.h deleted file mode 100644 index ac3459c876..0000000000 --- a/keyboards/yosino58/serial.h +++ /dev/null @@ -1,81 +0,0 @@ -#pragma once - -#include <stdbool.h> - -// ///////////////////////////////////////////////////////////////// -// Need Soft Serial defines in config.h -// ///////////////////////////////////////////////////////////////// -// ex. -// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 -// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 -// // 1: about 137kbps (default) -// // 2: about 75kbps -// // 3: about 39kbps -// // 4: about 26kbps -// // 5: about 20kbps -// -// //// USE Simple API (OLD API, compatible with let's split serial.c) -// ex. -// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -// #define SERIAL_MASTER_BUFFER_LENGTH 1 -// -// //// USE flexible API (using multi-type transaction function) -// #define SERIAL_USE_MULTI_TRANSACTION -// -// ///////////////////////////////////////////////////////////////// - - -#ifndef SERIAL_USE_MULTI_TRANSACTION -/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ -#if SERIAL_SLAVE_BUFFER_LENGTH > 0 -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -#endif -#if SERIAL_MASTER_BUFFER_LENGTH > 0 -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; -#endif - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); - -#endif // USE Simple API - -// Soft Serial Transaction Descriptor -typedef struct _SSTD_t { - uint8_t *status; - uint8_t initiator2target_buffer_size; - uint8_t *initiator2target_buffer; - uint8_t target2initiator_buffer_size; - uint8_t *target2initiator_buffer; -} SSTD_t; -#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) - -// initiator is transaction start side -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); -// target is interrupt accept side -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); - -// initiator resullt -#define TRANSACTION_END 0 -#define TRANSACTION_NO_RESPONSE 0x1 -#define TRANSACTION_DATA_ERROR 0x2 -#define TRANSACTION_TYPE_ERROR 0x4 -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void); -#else -int soft_serial_transaction(int sstd_index); -#endif - -// target status -// *SSTD_t.status has -// initiator: -// TRANSACTION_END -// or TRANSACTION_NO_RESPONSE -// or TRANSACTION_DATA_ERROR -// target: -// TRANSACTION_DATA_ERROR -// or TRANSACTION_ACCEPTED -#define TRANSACTION_ACCEPTED 0x8 -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index); -#endif diff --git a/keyboards/yosino58/ssd1306.c b/keyboards/yosino58/ssd1306.c deleted file mode 100644 index abd9de2f7a..0000000000 --- a/keyboards/yosino58/ssd1306.c +++ /dev/null @@ -1,347 +0,0 @@ -#ifdef SSD1306OLED - -#include "ssd1306.h" -#include "i2c.h" -#include <string.h> -#include "print.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#endif -#include "sendchar.h" -#include "timer.h" - -struct CharacterMatrix display; - -extern const unsigned char font[] PROGMEM; - -// Set this to 1 to help diagnose early startup problems -// when testing power-on with ble. Turn it off otherwise, -// as the latency of printing most of the debug info messes -// with the matrix scan, causing keys to drop. -#define DEBUG_TO_SCREEN 0 - -//static uint16_t last_battery_update; -//static uint32_t vbat; -//#define BatteryUpdateInterval 10000 /* milliseconds */ - -// 'last_flush' is declared as uint16_t, -// so this must be less than 65535 -#define ScreenOffInterval 30000 /* milliseconds */ -#if DEBUG_TO_SCREEN -static uint8_t displaying; -#endif -static uint16_t last_flush; - -static bool force_dirty = true; - -// Write command sequence. -// Returns true on success. -static inline bool _send_cmd1(uint8_t cmd) { - bool res = false; - - if (i2c_start_write(SSD1306_ADDRESS)) { - xprintf("failed to start write to %d\n", SSD1306_ADDRESS); - goto done; - } - - if (i2c_master_write(0x0 /* command byte follows */)) { - print("failed to write control byte\n"); - - goto done; - } - - if (i2c_master_write(cmd)) { - xprintf("failed to write command %d\n", cmd); - goto done; - } - res = true; -done: - i2c_master_stop(); - return res; -} - -// Write 2-byte command sequence. -// Returns true on success -static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { - if (!_send_cmd1(cmd)) { - return false; - } - return _send_cmd1(opr); -} - -// Write 3-byte command sequence. -// Returns true on success -static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { - if (!_send_cmd1(cmd)) { - return false; - } - if (!_send_cmd1(opr1)) { - return false; - } - return _send_cmd1(opr2); -} - -#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} -#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} -#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} - -static void clear_display(void) { - matrix_clear(&display); - - // Clear all of the display bits (there can be random noise - // in the RAM on startup) - send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); - send_cmd3(ColumnAddr, 0, DisplayWidth - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < DisplayWidth; ++col) { - i2c_master_write(0); - } - } - - display.dirty = false; - -done: - i2c_master_stop(); -} - -#if DEBUG_TO_SCREEN -#undef sendchar -static int8_t capture_sendchar(uint8_t c) { - sendchar(c); - iota_gfx_write_char(c); - - if (!displaying) { - iota_gfx_flush(); - } - return 0; -} -#endif - -bool iota_gfx_init(bool rotate) { - bool success = false; - - i2c_master_init(); - send_cmd1(DisplayOff); - send_cmd2(SetDisplayClockDiv, 0x80); - send_cmd2(SetMultiPlex, DisplayHeight - 1); - - send_cmd2(SetDisplayOffset, 0); - - - send_cmd1(SetStartLine | 0x0); - send_cmd2(SetChargePump, 0x14 /* Enable */); - send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); - - if(rotate){ - // the following Flip the display orientation 180 degrees - send_cmd1(SegRemap); - send_cmd1(ComScanInc); - }else{ - // Flips the display orientation 0 degrees - send_cmd1(SegRemap | 0x1); - send_cmd1(ComScanDec); - } - -#ifdef SSD1306_128X64 - send_cmd2(SetComPins, 0x12); -#else - send_cmd2(SetComPins, 0x2); -#endif - send_cmd2(SetContrast, 0x8f); - send_cmd2(SetPreCharge, 0xf1); - send_cmd2(SetVComDetect, 0x40); - send_cmd1(DisplayAllOnResume); - send_cmd1(NormalDisplay); - send_cmd1(DeActivateScroll); - send_cmd1(DisplayOn); - - send_cmd2(SetContrast, 0); // Dim - - clear_display(); - - success = true; - - iota_gfx_flush(); - -#if DEBUG_TO_SCREEN - print_set_sendchar(capture_sendchar); -#endif - -done: - return success; -} - -bool iota_gfx_off(void) { - bool success = false; - - send_cmd1(DisplayOff); - success = true; - -done: - return success; -} - -bool iota_gfx_on(void) { - bool success = false; - - send_cmd1(DisplayOn); - success = true; - -done: - return success; -} - -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { - *matrix->cursor = c; - ++matrix->cursor; - - if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { - // We went off the end; scroll the display upwards by one line - memmove(&matrix->display[0], &matrix->display[1], - MatrixCols * (MatrixRows - 1)); - matrix->cursor = &matrix->display[MatrixRows - 1][0]; - memset(matrix->cursor, ' ', MatrixCols); - } -} - -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { - matrix->dirty = true; - - if (c == '\n') { - // Clear to end of line from the cursor and then move to the - // start of the next line - uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; - - while (cursor_col++ < MatrixCols) { - matrix_write_char_inner(matrix, ' '); - } - return; - } - - matrix_write_char_inner(matrix, c); -} - -void iota_gfx_write_char(uint8_t c) { - matrix_write_char(&display, c); -} - -void matrix_write(struct CharacterMatrix *matrix, const char *data) { - const char *end = data + strlen(data); - while (data < end) { - matrix_write_char(matrix, *data); - ++data; - } -} - -void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) { - char data_ln[strlen(data)+2]; - snprintf(data_ln, sizeof(data_ln), "%s\n", data); - matrix_write(matrix, data_ln); -} - -void iota_gfx_write(const char *data) { - matrix_write(&display, data); -} - -void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { - while (true) { - uint8_t c = pgm_read_byte(data); - if (c == 0) { - return; - } - matrix_write_char(matrix, c); - ++data; - } -} - -void iota_gfx_write_P(const char *data) { - matrix_write_P(&display, data); -} - -void matrix_clear(struct CharacterMatrix *matrix) { - memset(matrix->display, ' ', sizeof(matrix->display)); - matrix->cursor = &matrix->display[0][0]; - matrix->dirty = true; -} - -void iota_gfx_clear_screen(void) { - matrix_clear(&display); -} - -void matrix_render(struct CharacterMatrix *matrix) { - last_flush = timer_read(); - iota_gfx_on(); -#if DEBUG_TO_SCREEN - ++displaying; -#endif - - // Move to the home position - send_cmd3(PageAddr, 0, MatrixRows - 1); - send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); - - if (i2c_start_write(SSD1306_ADDRESS)) { - goto done; - } - if (i2c_master_write(0x40)) { - // Data mode - goto done; - } - - for (uint8_t row = 0; row < MatrixRows; ++row) { - for (uint8_t col = 0; col < MatrixCols; ++col) { - const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); - - for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { - uint8_t colBits = pgm_read_byte(glyph + glyphCol); - i2c_master_write(colBits); - } - - // 1 column of space between chars (it's not included in the glyph) - //i2c_master_write(0); - } - } - - matrix->dirty = false; - -done: - i2c_master_stop(); -#if DEBUG_TO_SCREEN - --displaying; -#endif -} - -void iota_gfx_flush(void) { - matrix_render(&display); -} - -__attribute__ ((weak)) -void iota_gfx_task_user(void) { -} - -void iota_gfx_task(void) { - iota_gfx_task_user(); - - if (display.dirty|| force_dirty) { - iota_gfx_flush(); - force_dirty = false; - } - - if (timer_elapsed(last_flush) > ScreenOffInterval) { - iota_gfx_off(); - } -} - -bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { - force_dirty = true; - return true; -} - -#endif diff --git a/keyboards/yosino58/ssd1306.h b/keyboards/yosino58/ssd1306.h deleted file mode 100644 index 35e4c144cc..0000000000 --- a/keyboards/yosino58/ssd1306.h +++ /dev/null @@ -1,95 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include <stdio.h> -#include "action.h" - -enum ssd1306_cmds { - DisplayOff = 0xAE, - DisplayOn = 0xAF, - - SetContrast = 0x81, - DisplayAllOnResume = 0xA4, - - DisplayAllOn = 0xA5, - NormalDisplay = 0xA6, - InvertDisplay = 0xA7, - SetDisplayOffset = 0xD3, - SetComPins = 0xda, - SetVComDetect = 0xdb, - SetDisplayClockDiv = 0xD5, - SetPreCharge = 0xd9, - SetMultiPlex = 0xa8, - SetLowColumn = 0x00, - SetHighColumn = 0x10, - SetStartLine = 0x40, - - SetMemoryMode = 0x20, - ColumnAddr = 0x21, - PageAddr = 0x22, - - ComScanInc = 0xc0, - ComScanDec = 0xc8, - SegRemap = 0xa0, - SetChargePump = 0x8d, - ExternalVcc = 0x01, - SwitchCapVcc = 0x02, - - ActivateScroll = 0x2f, - DeActivateScroll = 0x2e, - SetVerticalScrollArea = 0xa3, - RightHorizontalScroll = 0x26, - LeftHorizontalScroll = 0x27, - VerticalAndRightHorizontalScroll = 0x29, - VerticalAndLeftHorizontalScroll = 0x2a, -}; - -// Controls the SSD1306 128x32 OLED display via i2c - -#ifndef SSD1306_ADDRESS -#define SSD1306_ADDRESS 0x3C -#endif - -#ifdef SSD1306_128X64 -#define DisplayHeight 64 -#else -#define DisplayHeight 32 -#endif -#define DisplayWidth 128 - - -#define FontHeight 8 -#define FontWidth 6 - -#define MatrixRows (DisplayHeight / FontHeight) -#define MatrixCols (DisplayWidth / FontWidth) - -struct CharacterMatrix { - uint8_t display[MatrixRows][MatrixCols]; - uint8_t *cursor; - bool dirty; -}; - -extern struct CharacterMatrix display; - -bool iota_gfx_init(bool rotate); -void iota_gfx_task(void); -bool iota_gfx_off(void); -bool iota_gfx_on(void); -void iota_gfx_flush(void); -void iota_gfx_write_char(uint8_t c); -void iota_gfx_write(const char *data); -void iota_gfx_write_P(const char *data); -void iota_gfx_clear_screen(void); - -void iota_gfx_task_user(void); - -void matrix_clear(struct CharacterMatrix *matrix); -void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); -void matrix_write(struct CharacterMatrix *matrix, const char *data); -void matrix_write_ln(struct CharacterMatrix *matrix, const char *data); -void matrix_write_P(struct CharacterMatrix *matrix, const char *data); -void matrix_render(struct CharacterMatrix *matrix); - -bool process_record_gfx(uint16_t keycode, keyrecord_t *record); diff --git a/keyboards/yosino58/yosino58.c b/keyboards/yosino58/yosino58.c index ff3ec10e5a..85545f3f44 100644 --- a/keyboards/yosino58/yosino58.c +++ b/keyboards/yosino58/yosino58.c @@ -1,10 +1 @@ -#include "yosino58.h" -#include "ssd1306.h" - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { -#ifdef SSD1306OLED - return process_record_gfx(keycode,record) && process_record_user(keycode, record); -#else - return process_record_user(keycode, record); -#endif -} +#include "yosino58.h"
\ No newline at end of file |