summaryrefslogtreecommitdiff
path: root/keyboards/ymd96/README.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ymd96/README.md')
-rw-r--r--keyboards/ymd96/README.md14
1 files changed, 10 insertions, 4 deletions
diff --git a/keyboards/ymd96/README.md b/keyboards/ymd96/README.md
index 7a950223b6..9cb3760582 100644
--- a/keyboards/ymd96/README.md
+++ b/keyboards/ymd96/README.md
@@ -31,17 +31,23 @@ This firmware was modified from [ps2avrGB](https://github.com/qmk/qmk_firmware/t
## Installing and Building
-Since the YMD96 uses an ATmega32a chip instead of the 32u4, you need to download [HIDBootFlash v.1.0](http://vusb.wikidot.com/project:hidbootflash) for Windows. If anyone knows of a Linux/Mac bootflasher that works, edit this readme!
+Since the YMD96 uses an ATmega32a chip instead of the 32u4, you need to download [HIDBootFlash v.1.0](http://vusb.wikidot.com/project:hidbootflash) for Windows. For Linux you can use the [bootloadHID](https://www.obdev.at/products/vusb/bootloadhid.html) utility (which will require building). Arch Linux users can alternatively install this from the [AUR](https://aur.archlinux.org/packages/bootloadhid/).
On Windows, I use [MINGw](http://www.mingw.org/) to compile the keymaps. On Linux, you can simply use the terminal.
Once you have those two pieces of software:
-Build the keyboard with
+Build the keyboard by navigating to the root folder of the QMK repo and running
```
-$ make ymd96-default
+$ make ymd96:default
```
If you make your own layout, change the `default` word to whatever your layout is.
-And flash the compiled hex file with `HIDBootFlash`. Simply put the board in flashing mode by plugging it in while holding control, and click `find device`. Then you can specify the .hex file and flash it to the device.
+To flash the compiled hex file, simply put the board in flashing mode by plugging it in while holding control.
+In `HIDBootFlash` first click `find device`, then you can specify the .hex file and flash it to the device.
+For `bootloadHID`, from a terminal that is in the same folder as your firmware file, run
+```
+$ sudo bootloadHID ymd96_default.hex
+```
+Again replacing default with your custom keymap name if required.
## Troubleshooting