diff options
Diffstat (limited to 'keyboards/yampad')
| -rw-r--r-- | keyboards/yampad/config.h | 85 | ||||
| -rw-r--r-- | keyboards/yampad/keymaps/default/keymap.c | 163 | ||||
| -rw-r--r-- | keyboards/yampad/keymaps/traditional/keymap.c | 163 | ||||
| -rw-r--r-- | keyboards/yampad/readme.md | 19 | ||||
| -rw-r--r-- | keyboards/yampad/rules.mk | 24 | ||||
| -rw-r--r-- | keyboards/yampad/yampad.c | 64 | ||||
| -rw-r--r-- | keyboards/yampad/yampad.h | 57 |
7 files changed, 575 insertions, 0 deletions
diff --git a/keyboards/yampad/config.h b/keyboards/yampad/config.h new file mode 100644 index 0000000000..d04ae37d5a --- /dev/null +++ b/keyboards/yampad/config.h @@ -0,0 +1,85 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x8369 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Mattia Dal Ben +#define PRODUCT Yampad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 } +#define MATRIX_COL_PINS { B1, B3, B2, B6 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Underlight configuration */ +#define RGB_DI_PIN F4 +#define RGBLED_NUM 9 +#define RGBLIGHT_ANIMATIONS + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 2 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/yampad/keymaps/default/keymap.c b/keyboards/yampad/keymaps/default/keymap.c new file mode 100644 index 0000000000..dfecab17eb --- /dev/null +++ b/keyboards/yampad/keymaps/default/keymap.c @@ -0,0 +1,163 @@ +/* MIT License + +Copyright (c) 2019 Mattia Dal Ben + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layers { + _BL, + _NV, + _FN +}; + +enum custom_keycodes { + KC_DBL0 = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * | NV | / | * |-/FN| + * |----|----|----|----| + * | 7 | 8 | 9 | | + * |----|----|----| + | + * | 4 | 5 | 6 | | + * |----|----|----|----| + * | 1 | 2 | 3 | | + * |----|----|----| En | + * | 0 | 00 | . | | + * `-------------------' + */ + [_BL] = LAYOUT( + TG(_NV), KC_PSLS, KC_PAST, LT(_FN, KC_PMNS), + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_DBL0, KC_PDOT, KC_PENT + ), + +/* Keymap _NV: Navigation layer + * ,-------------------. + * |INS |HOME|PGUP| | + * |----|----|----|----| + * |DEL |END |PGDN| | + * |----|----|----| | + * | | | | | + * |----|----|----|----| + * | | UP | | | + * |----|----|----| | + * |LEFT|DOWN|RIGH| | + * `-------------------' + */ + [_NV] = LAYOUT( + KC_INS, KC_HOME, KC_PGUP, TG(_NV), + KC_DEL, KC_END, KC_PGDN, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, KC_UP, XXXXXXX, + KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX + ), + +/* Keymap _FN: RGB Function Layer + * ,-------------------. + * |RMOD|RGBP|RTOG| FN | + * |----|----|----|----| + * |HUD |HUI | | | + * |----|----|----| | + * |SAD |SAI | | | + * |----|----|----|----| + * |VAD |VAS | | | + * |----|----|----| | + * |RST | | | | + * `-------------------' + */ + [_FN] = LAYOUT( + RGB_MOD, RGB_M_P, RGB_TOG, _______, + RGB_HUD, RGB_HUI, XXXXXXX, + RGB_SAD, RGB_SAI, XXXXXXX, XXXXXXX, + RGB_VAD, RGB_VAI, XXXXXXX, + RESET, XXXXXXX, XXXXXXX, XXXXXXX + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_DBL0: + if (record->event.pressed) { + SEND_STRING("00"); + } else { + // when keycode KC_DBL0 is released + } + break; + + } + return true; +}; + +#ifdef OLED_DRIVER_ENABLE + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_270; // flips the display 270 degrees +} + +void oled_task_user(void) { + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer"), false); + switch (get_highest_layer(layer_state)) { + case _BL: + oled_write_ln_P(PSTR(" BAS"), false); + break; + case _NV: + oled_write_ln_P(PSTR(" NAV"), false); + break; + case _FN: + oled_write_ln_P(PSTR(" RGB"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR(" UND"), false); + } + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(PSTR("-----"), false); + oled_write_P(PSTR("Stats"), false); + oled_write_P(led_state.num_lock ? PSTR("num:*") : PSTR("num:."), false); + oled_write_P(led_state.caps_lock ? PSTR("cap:*") : PSTR("cap:."), false); + oled_write_P(led_state.scroll_lock ? PSTR("scr:*") : PSTR("scr:."), false); + + // Host Keyboard RGB backlight status + oled_write_P(PSTR("-----"), false); + oled_write_P(PSTR("Light"), false); + + static char led_buf[30]; + snprintf(led_buf, sizeof(led_buf) - 1, "RGB:%cM: %2d\nh: %2ds: %2dv: %2d\n", + rgblight_is_enabled() ? '*' : '.', (uint8_t)rgblight_get_mode(), + (uint8_t)(rgblight_get_hue() / RGBLIGHT_HUE_STEP), + (uint8_t)(rgblight_get_sat() / RGBLIGHT_SAT_STEP), + (uint8_t)(rgblight_get_val() / RGBLIGHT_VAL_STEP)); + oled_write(led_buf, false); +} +#endif diff --git a/keyboards/yampad/keymaps/traditional/keymap.c b/keyboards/yampad/keymaps/traditional/keymap.c new file mode 100644 index 0000000000..e9fd2b8ae1 --- /dev/null +++ b/keyboards/yampad/keymaps/traditional/keymap.c @@ -0,0 +1,163 @@ +/* MIT License + +Copyright (c) 2020 Richard Davey (Daveyr) + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layers { + _BL = 0, + _NV, + _FN +}; + +enum custom_keycodes { + KC_DBL0 = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * | NV | / | * |-/FN| + * |----|----|----|----| + * | 7 | 8 | 9 | | + * |----|----|----| + | + * | 4 | 5 | 6 | | + * |----|----|----|----| + * | 1 | 2 | 3 | | + * |----|----|----| En | + * | 0 | 00 | . | | + * `-------------------' + */ + [_BL] = LAYOUT( + TG(_NV), KC_PSLS, KC_PAST, LT(_FN, KC_PMNS), + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_DBL0, KC_PDOT, KC_PENT + ), + +/* Keymap _NV: Navigation layer + * ,-------------------. + * |INS |BSPC| | | + * |----|----|----|----| + * |HOME| UP |PGUP| | + * |----|----|----| | + * |LEFT|DEL |RGHT| | + * |----|----|----|----| + * |END |DOWN|PGDN| | + * |----|----|----| | + * | | | | | + * `-------------------' + */ + [_NV] = LAYOUT( + KC_INS, KC_BSPACE, XXXXXXX, TG(_NV), + KC_HOME, KC_UP, KC_PGUP, + KC_LEFT, KC_DEL, KC_RGHT, XXXXXXX, + KC_END, KC_DOWN, KC_PGDN, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ), + +/* Keymap _FN: RGB Function Layer + * ,-------------------. + * |RMOD|RGBP|RTOG| FN | + * |----|----|----|----| + * |HUD |HUI | | | + * |----|----|----| | + * |SAD |SAI | | | + * |----|----|----|----| + * |VAD |VAS | | | + * |----|----|----| | + * |RST | | | | + * `-------------------' + */ + [_FN] = LAYOUT( + RGB_MOD, RGB_M_P, RGB_TOG, _______, + RGB_HUD, RGB_HUI, XXXXXXX, + RGB_SAD, RGB_SAI, XXXXXXX, XXXXXXX, + RGB_VAD, RGB_VAI, XXXXXXX, + RESET, XXXXXXX, XXXXXXX, XXXXXXX + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_DBL0: + if (record->event.pressed) { + SEND_STRING("00"); + } else { + // when keycode KC_DBL0 is released + } + break; + + } + return true; +}; + +#ifdef OLED_DRIVER_ENABLE + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_270; // flips the display 270 degrees +} + +void oled_task_user(void) { + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer"), false); + switch (get_highest_layer(layer_state)) { + case _BL: + oled_write_ln_P(PSTR(" BAS"), false); + break; + case _NV: + oled_write_ln_P(PSTR(" NAV"), false); + break; + case _FN: + oled_write_ln_P(PSTR(" RGB"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR(" UND"), false); + } + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(PSTR("-----"), false); + oled_write_P(PSTR("Stats"), false); + oled_write_P(led_state.num_lock ? PSTR("num:*") : PSTR("num:."), false); + oled_write_P(led_state.caps_lock ? PSTR("cap:*") : PSTR("cap:."), false); + oled_write_P(led_state.scroll_lock ? PSTR("scr:*") : PSTR("scr:."), false); + + // Host Keyboard RGB backlight status + oled_write_P(PSTR("-----"), false); + oled_write_P(PSTR("Light"), false); + + static char led_buf[30]; + snprintf(led_buf, sizeof(led_buf) - 1, "RGB:%cM: %2d\nh: %2ds: %2dv: %2d\n", + rgblight_is_enabled() ? '*' : '.', (uint8_t)rgblight_get_mode(), + (uint8_t)(rgblight_get_hue() / RGBLIGHT_HUE_STEP), + (uint8_t)(rgblight_get_sat() / RGBLIGHT_SAT_STEP), + (uint8_t)(rgblight_get_val() / RGBLIGHT_VAL_STEP)); + oled_write(led_buf, false); +} +#endif diff --git a/keyboards/yampad/readme.md b/keyboards/yampad/readme.md new file mode 100644 index 0000000000..e6cc03d60d --- /dev/null +++ b/keyboards/yampad/readme.md @@ -0,0 +1,19 @@ +# Yampad + + + +The Yampad project is an open-source, QMK (Quantum Mechanical Keyboard Firmware) powered, hot-swappable, RGB-backlighted, OLED featured, mechanical numpad. This repository will be used to share information about the project and instruction on how to use and assemble the Yampad. + +* Keyboard Maintainer: [mattdibi](https://github.com/mattdibi) +* Hardware Supported: Pro Micro, (ATmega32u4) +* Hardware Availability: https://github.com/mattdibi/yampad + +Make example for this keyboard (after setting up your build environment): + + make yampad:default + +Flashing example for this keyboard: + + make yampad:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/yampad/rules.mk b/keyboards/yampad/rules.mk new file mode 100644 index 0000000000..db0a8b5da5 --- /dev/null +++ b/keyboards/yampad/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +OLED_DRIVER_ENABLE = yes +DEBOUNCE_TYPE = eager_pk diff --git a/keyboards/yampad/yampad.c b/keyboards/yampad/yampad.c new file mode 100644 index 0000000000..764f48404d --- /dev/null +++ b/keyboards/yampad/yampad.c @@ -0,0 +1,64 @@ + +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "yampad.h" + +#if defined(OLED_DRIVER_ENABLE) +__attribute__((weak)) +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_270; // flips the display 270 degrees +} + +__attribute__((weak)) +void oled_task_user(void) { + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer"), false); + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_ln_P(PSTR(" BAS"), false); + break; + case 1: + oled_write_ln_P(PSTR(" NAV"), false); + break; + case 2: + oled_write_ln_P(PSTR(" RGB"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR(" UND"), false); + } + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(PSTR("-----"), false); + oled_write_P(PSTR("Stats"), false); + oled_write_P(led_state.num_lock ? PSTR("num:*") : PSTR("num:."), false); + oled_write_P(led_state.caps_lock ? PSTR("cap:*") : PSTR("cap:."), false); + oled_write_P(led_state.scroll_lock ? PSTR("scr:*") : PSTR("scr:."), false); + + // Host Keyboard RGB backlight status + oled_write_P(PSTR("-----"), false); + oled_write_P(PSTR("Light"), false); + + static char led_buf[30]; + snprintf(led_buf, sizeof(led_buf) - 1, "RGB:%cM: %2d\nh: %2ds: %2dv: %2d\n", + rgblight_is_enabled() ? '*' : '.', (uint8_t)rgblight_get_mode(), + (uint8_t)(rgblight_get_hue() / RGBLIGHT_HUE_STEP), + (uint8_t)(rgblight_get_sat() / RGBLIGHT_SAT_STEP), + (uint8_t)(rgblight_get_val() / RGBLIGHT_VAL_STEP)); + oled_write(led_buf, false); +} +#endif diff --git a/keyboards/yampad/yampad.h b/keyboards/yampad/yampad.h new file mode 100644 index 0000000000..68ec98ffdd --- /dev/null +++ b/keyboards/yampad/yampad.h @@ -0,0 +1,57 @@ + +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define ___ KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +/* COSPAD numpad matrix layout + * ,-------------------. + * | 00 | 01 | 02 | 03 | + * |----|----|----|----| + * | 10 | 11 | 12 | | + * |----|----|----| 13 | + * | 20 | 21 | 22 | | + * |----|----|----|----| + * | 30 | 31 | 32 | | + * |----|----|----| 43 | + * | 40 | 41 | 42 | | + * `-------------------' + */ +#define LAYOUT( \ + k00, k01, k02, k03, \ + k10, k11, k12, \ + k20, k21, k22, k13, \ + k30, k31, k32, \ + k40, k41, k42, k43 \ +) \ +{ \ + {k00, k01, k02, k03}, \ + {k10, k11, k12, k13}, \ + {k20, k21, k22, ___}, \ + {k30, k31, k32, ___}, \ + {k40, k41, k42, k43} \ +} |