summaryrefslogtreecommitdiff
path: root/keyboards/xiudi/xd002/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/xiudi/xd002/readme.md')
-rw-r--r--keyboards/xiudi/xd002/readme.md49
1 files changed, 49 insertions, 0 deletions
diff --git a/keyboards/xiudi/xd002/readme.md b/keyboards/xiudi/xd002/readme.md
new file mode 100644
index 0000000000..6358bc754e
--- /dev/null
+++ b/keyboards/xiudi/xd002/readme.md
@@ -0,0 +1,49 @@
+# xd002
+
+![xd002](https://cdn.shopify.com/s/files/1/2711/4238/products/xd002_1024x1024.jpg?v=1522134411)
+
+2% Custom mechanical keyboard. ATtiny85 powered, with 2*WS2812 LEDs, and the micronucleus bootloader.
+
+**Note**: Due to limited firmware space, a _**lot**_ of features have to be disabled to get a functioning QMK based keyboard.
+
+* Keyboard Maintainer: [zvecr](https://github.com/zvecr)
+* Hardware Supported: xd002
+* Hardware Availability: [kprepublic](https://kprepublic.com/products/xd002-xiudi-2-custom-mechanical-keyboard-2-keys-underglow-and-switch-rgb-pcb-programmed-hot-swappable-macro-key-aluminum-case)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make xd002:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Flashing
+### Prerequisites
+
+```bash
+git clone https://github.com/micronucleus/micronucleus.git
+cd micronucleus/commandline/
+sudo make install
+```
+
+On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place [these files](https://github.com/micronucleus/micronucleus/blob/master/commandline/49-micronucleus.rules) in /etc/udev/rules.d/. Once added run the following:
+
+```bash
+sudo udevadm control --reload-rules
+sudo udevadm trigger
+```
+
+### Instructions
+
+**Reset Key**: Hold down key nearest to the USB socket while plugging in the keyboard.
+
+```bash
+make xd002:default:flash
+
+# or directly with...
+micronucleus --run <firmware.hex>
+```
+
+### Recovery
+
+* [Original Firmware](https://github.com/xiudi/Attiny85_vusb_pad_test)
+* [Bootloader Repair](https://digistump.com/wiki/digispark/tutorials/proisp)