diff options
Diffstat (limited to 'keyboards/unikorn')
| -rw-r--r-- | keyboards/unikorn/config.h | 2 | ||||
| -rw-r--r-- | keyboards/unikorn/info.json | 4 | ||||
| -rw-r--r-- | keyboards/unikorn/keymaps/default/config.h | 19 | ||||
| -rw-r--r-- | keyboards/unikorn/keymaps/default/keymap.c | 2 | ||||
| -rw-r--r-- | keyboards/unikorn/keymaps/default/readme.md | 1 | ||||
| -rw-r--r-- | keyboards/unikorn/keymaps/default/rules.mk | 0 | ||||
| -rw-r--r-- | keyboards/unikorn/keymaps/tsangan/keymap.c | 35 | ||||
| -rw-r--r-- | keyboards/unikorn/readme.md | 7 | ||||
| -rw-r--r-- | keyboards/unikorn/rules.mk | 42 | ||||
| -rw-r--r-- | keyboards/unikorn/unikorn.c | 50 | ||||
| -rw-r--r-- | keyboards/unikorn/unikorn.h | 14 | ||||
| -rw-r--r-- | keyboards/unikorn/usbconfig.h | 12 |
12 files changed, 74 insertions, 114 deletions
diff --git a/keyboards/unikorn/config.h b/keyboards/unikorn/config.h index 161956b88e..1c4f3431a0 100644 --- a/keyboards/unikorn/config.h +++ b/keyboards/unikorn/config.h @@ -21,6 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER Singa and TGR #define PRODUCT Unikorn 60 @@ -35,7 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 -#define NO_BACKLIGHT_CLOCK #define BACKLIGHT_LEVELS 1 #ifdef RGBLIGHT_ENABLE #define RGBLED_NUM 17 diff --git a/keyboards/unikorn/info.json b/keyboards/unikorn/info.json index 9c82e25b47..71088d2047 100644 --- a/keyboards/unikorn/info.json +++ b/keyboards/unikorn/info.json @@ -11,6 +11,10 @@ "LAYOUT_60_ansi": { "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] + }, + + "LAYOUT_60_tsangan_hhkb": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}] } } }
\ No newline at end of file diff --git a/keyboards/unikorn/keymaps/default/config.h b/keyboards/unikorn/keymaps/default/config.h deleted file mode 100644 index 93b81b57ba..0000000000 --- a/keyboards/unikorn/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2018 amnesia0287 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -// place overrides here diff --git a/keyboards/unikorn/keymaps/default/keymap.c b/keyboards/unikorn/keymaps/default/keymap.c index d19d83c8ab..3e73036253 100644 --- a/keyboards/unikorn/keymaps/default/keymap.c +++ b/keyboards/unikorn/keymaps/default/keymap.c @@ -19,7 +19,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_60_ansi( - KC_GRV, KC_Q, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, diff --git a/keyboards/unikorn/keymaps/default/readme.md b/keyboards/unikorn/keymaps/default/readme.md deleted file mode 100644 index 1f19a96b46..0000000000 --- a/keyboards/unikorn/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for singa
\ No newline at end of file diff --git a/keyboards/unikorn/keymaps/default/rules.mk b/keyboards/unikorn/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb2..0000000000 --- a/keyboards/unikorn/keymaps/default/rules.mk +++ /dev/null diff --git a/keyboards/unikorn/keymaps/tsangan/keymap.c b/keyboards/unikorn/keymaps/tsangan/keymap.c new file mode 100644 index 0000000000..4c86d4f02e --- /dev/null +++ b/keyboards/unikorn/keymaps/tsangan/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_tsangan_hhkb( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), + + [1] = LAYOUT_60_tsangan_hhkb( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/unikorn/readme.md b/keyboards/unikorn/readme.md index 953d5be792..1f8b16d649 100644 --- a/keyboards/unikorn/readme.md +++ b/keyboards/unikorn/readme.md @@ -18,7 +18,6 @@ To enable RGB lighting support, install the necessary components and set RGBLIGH ``` RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes ``` @@ -26,7 +25,11 @@ Flashing ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. -**Reset Key:** Short the two holes labeled `FW_JP` beside the Tab key. At this time there is no reset key to press. +**Reset Key:** Short the two holes labeled `FW_JP` underneath the PCB, beside the Tab key while plugging in the keyboard. + +Do not confuse this with the LED holes of the switch in the `Tab` position. `FW_JP` is not reachable from the top as the plate blocks access to it. + +It is recommended to program a `RESET` key in your keymap. Windows: 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). diff --git a/keyboards/unikorn/rules.mk b/keyboards/unikorn/rules.mk index 7d6fa14e1e..e57c21c856 100644 --- a/keyboards/unikorn/rules.mk +++ b/keyboards/unikorn/rules.mk @@ -1,33 +1,14 @@ -# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - # MCU name MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = bootloadHID # build options @@ -38,11 +19,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = no -RGBLIGHT_CUSTOM_DRIVER = no +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -SRC = i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/unikorn/unikorn.c b/keyboards/unikorn/unikorn.c index 1bd47ef9e1..70bc5a988f 100644 --- a/keyboards/unikorn/unikorn.c +++ b/keyboards/unikorn/unikorn.c @@ -14,49 +14,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "unikorn.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -73,17 +31,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } + } } diff --git a/keyboards/unikorn/unikorn.h b/keyboards/unikorn/unikorn.h index 6824492e04..2666bf066e 100644 --- a/keyboards/unikorn/unikorn.h +++ b/keyboards/unikorn/unikorn.h @@ -50,3 +50,17 @@ { k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, k48, k49, KC_NO, k4B, KC_NO, k4D, KC_NO }, \ } +#define LAYOUT_60_tsangan_hhkb( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ + k40, k41, k42, k45, k48, k49, k4A \ +){ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, KC_NO }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO }, \ + { k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, k48, k49, k4A, KC_NO, KC_NO, KC_NO, KC_NO }, \ +} + diff --git a/keyboards/unikorn/usbconfig.h b/keyboards/unikorn/usbconfig.h index 41ce167a87..3dcd1ccde7 100644 --- a/keyboards/unikorn/usbconfig.h +++ b/keyboards/unikorn/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of @@ -237,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 's', 'i', 'n', 'g', 'a', 't', 'g', 'r' |