8 files changed, 20 insertions, 73 deletions
diff --git a/keyboards/senselessclay/ck60/config.h b/keyboards/senselessclay/ck60/config.h
index a5da1ed51e..5c4153e3d0 100644
--- a/keyboards/senselessclay/ck60/config.h
+++ b/keyboards/senselessclay/ck60/config.h
@@ -17,14 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { B3, B2, F1, F4, F5 }
-#define MATRIX_COL_PINS { F0, D5, D3, D2, D1, D0, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* RGB matrix lighting */ 
 #define RGB_DI_PIN B1
 #define RGB_MATRIX_LED_COUNT 62
diff --git a/keyboards/senselessclay/ck60/info.json b/keyboards/senselessclay/ck60/info.json
index d089aa333c..45e84f254b 100644
--- a/keyboards/senselessclay/ck60/info.json
+++ b/keyboards/senselessclay/ck60/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0601",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "D5", "D3", "D2", "D1", "D0", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["B3", "B2", "F1", "F4", "F5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layout_aliases": {
diff --git a/keyboards/senselessclay/ck65/config.h b/keyboards/senselessclay/ck65/config.h
index 5aeeee7a74..2d2326fb40 100644
--- a/keyboards/senselessclay/ck65/config.h
+++ b/keyboards/senselessclay/ck65/config.h
@@ -17,25 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-/* rev0 */
-#define MATRIX_ROW_PINS { B3, B2, F1, F4, F5 }
-#define MATRIX_COL_PINS { F0, D5, D3, D2, D1, D0, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/senselessclay/ck65/info.json b/keyboards/senselessclay/ck65/info.json
index cb596c21e2..7bc2839a9f 100644
--- a/keyboards/senselessclay/ck65/info.json
+++ b/keyboards/senselessclay/ck65/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0651",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "D5", "D3", "D2", "D1", "D0", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["B3", "B2", "F1", "F4", "F5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layout_aliases": {
diff --git a/keyboards/senselessclay/gos65/config.h b/keyboards/senselessclay/gos65/config.h
index 22dadfed74..02d27c11e6 100644
--- a/keyboards/senselessclay/gos65/config.h
+++ b/keyboards/senselessclay/gos65/config.h
@@ -17,30 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-/* rev0 */
-/*
-#define MATRIX_ROW_PINS { B1, B2, F6, F5, F4 }
-#define MATRIX_COL_PINS { F1, D5, D3, D2, D1, D0, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-*/
-/* rev1 */
-#define MATRIX_ROW_PINS { B1, B2, F1, F6, F5 }
-#define MATRIX_COL_PINS { F4, D5, D3, D2, D1, D0, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/senselessclay/gos65/info.json b/keyboards/senselessclay/gos65/info.json
index b1007fe065..bdd73caed4 100644
--- a/keyboards/senselessclay/gos65/info.json
+++ b/keyboards/senselessclay/gos65/info.json
@@ -8,6 +8,11 @@
       "pid": "0x0650",
       "device_version": "0.0.1"
     },
+    "matrix_pins": {
+      "cols": ["F4", "D5", "D3", "D2", "D1", "D0", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+      "rows": ["B1", "B2", "F1", "F6", "F5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/senselessclay/had60/config.h b/keyboards/senselessclay/had60/config.h
index 01d85c0517..bdeea958dc 100644
--- a/keyboards/senselessclay/had60/config.h
+++ b/keyboards/senselessclay/had60/config.h
@@ -17,28 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-/* rev0 */ 
-//#define MATRIX_ROW_PINS { F0, D0, D4, F5, F4 }
-//#define MATRIX_COL_PINS { F1, D5, D3, D2, D1, F6, F7, C7, C6, B6, B5, B4, D7, D6 }
-/* rev1 */ 
-#define MATRIX_ROW_PINS { F1, F0, F7, F6, F5 }
-#define MATRIX_COL_PINS { F4, D5, D3, D2, D1, D0, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/senselessclay/had60/info.json b/keyboards/senselessclay/had60/info.json
index a5a46d0cd5..f76a1355ee 100644
--- a/keyboards/senselessclay/had60/info.json
+++ b/keyboards/senselessclay/had60/info.json
@@ -8,6 +8,11 @@
       "pid": "0x060F",
       "device_version": "0.0.1"
     },
+    "matrix_pins": {
+      "cols": ["F4", "D5", "D3", "D2", "D1", "D0", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+      "rows": ["F1", "F0", "F7", "F6", "F5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {