summaryrefslogtreecommitdiff
path: root/keyboards/sawnsprojects/krush/krush60/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/sawnsprojects/krush/krush60/readme.md')
-rw-r--r--keyboards/sawnsprojects/krush/krush60/readme.md25
1 files changed, 25 insertions, 0 deletions
diff --git a/keyboards/sawnsprojects/krush/krush60/readme.md b/keyboards/sawnsprojects/krush/krush60/readme.md
new file mode 100644
index 0000000000..515040f904
--- /dev/null
+++ b/keyboards/sawnsprojects/krush/krush60/readme.md
@@ -0,0 +1,25 @@
+# Krush60
+
+A 60% keyboard sold in several variants.
+
+1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko.
+
+ **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
+
+* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
+* Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case
+* Hardware Availability: [Mechkey.store](https://mechkey.store/)
+
+Make examples for this keyboard (after setting up your build environment):
+
+ make sawnsprojects/krush/krush60/solder:default
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file