3 files changed, 7 insertions, 66 deletions
diff --git a/keyboards/pohjolaworks/louhi/config.h b/keyboards/pohjolaworks/louhi/config.h
index d0fe80b44a..12721a16b0 100644
--- a/keyboards/pohjolaworks/louhi/config.h
+++ b/keyboards/pohjolaworks/louhi/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 7
 
 /*
  * Keyboard Matrix Assignments
@@ -39,19 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Encoder pins */
-#define ENCODERS_PAD_A { B2 }
-#define ENCODERS_PAD_B { B3 }
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN B5
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 14
@@ -60,51 +42,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_VAL_STEP 8
 #    define RGBLIGHT_LIMIT_VAL 230 /* The maximum brightness level */
 //#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -120,7 +64,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/pohjolaworks/louhi/info.json b/keyboards/pohjolaworks/louhi/info.json
index e305708d7d..0185fe83bb 100644
--- a/keyboards/pohjolaworks/louhi/info.json
+++ b/keyboards/pohjolaworks/louhi/info.json
@@ -8,6 +8,13 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B2", "pin_b": "B3"}
+        ]
+    },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT_7u_space": {
             "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k10", "x":1, "y":0}, {"label":"k01", "x":2, "y":0}, {"label":"k11", "x":3, "y":0}, {"label":"k02", "x":4, "y":0}, {"label":"k12", "x":5, "y":0}, {"label":"k03", "x":6, "y":0}, {"label":"k13", "x":7, "y":0}, {"label":"k04", "x":8, "y":0}, {"label":"k14", "x":9, "y":0}, {"label":"k05", "x":10, "y":0}, {"label":"k15", "x":11, "y":0}, {"label":"k06", "x":12, "y":0}, {"label":"k20", "x":0, "y":1}, {"label":"k30", "x":1, "y":1}, {"label":"k21", "x":2, "y":1}, {"label":"k31", "x":3, "y":1}, {"label":"k22", "x":4, "y":1}, {"label":"k32", "x":5, "y":1}, {"label":"k23", "x":6, "y":1}, {"label":"k33", "x":7, "y":1}, {"label":"k24", "x":8, "y":1}, {"label":"k34", "x":9, "y":1}, {"label":"k25", "x":10, "y":1}, {"label":"k35", "x":11, "y":1}, {"label":"k26", "x":12, "y":1}, {"label":"k40", "x":0, "y":2}, {"label":"k50", "x":1, "y":2}, {"label":"k41", "x":2, "y":2}, {"label":"k51", "x":3, "y":2}, {"label":"k42", "x":4, "y":2}, {"label":"k52", "x":5, "y":2}, {"label":"k43", "x":6, "y":2}, {"label":"k53", "x":7, "y":2}, {"label":"k44", "x":8, "y":2}, {"label":"k54", "x":9, "y":2}, {"label":"k45", "x":10, "y":2}, {"label":"k55", "x":11, "y":2}, {"label":"k46", "x":12, "y":2}, {"label":"k60", "x":0, "y":3}, {"label":"k70", "x":1, "y":3}, {"label":"k61", "x":2, "y":3}, {"label":"k63", "x":3, "y":3, "w":7}, {"label":"k65", "x":10, "y":3}, {"label":"k75", "x":11, "y":3}, {"label":"k66", "x":12, "y":3}]
diff --git a/keyboards/pohjolaworks/louhi/rules.mk b/keyboards/pohjolaworks/louhi/rules.mk
index a56e12eb22..b03b6fa905 100644
--- a/keyboards/pohjolaworks/louhi/rules.mk
+++ b/keyboards/pohjolaworks/louhi/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #