summaryrefslogtreecommitdiff
path: root/keyboards/nebula12/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/nebula12/config.h')
-rwxr-xr-xkeyboards/nebula12/config.h178
1 files changed, 0 insertions, 178 deletions
diff --git a/keyboards/nebula12/config.h b/keyboards/nebula12/config.h
deleted file mode 100755
index da9fd10575..0000000000
--- a/keyboards/nebula12/config.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
-Copyright 2020 Yiancar
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
-#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
-
-/* LSE clock */
-#define STM32_LSECLK 32768
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0x8968
-#define PRODUCT_ID 0x5337
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Yiancar-Designs
-#define PRODUCT NEBULA12
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 3
-
-#define MATRIX_ROW_PINS { A8, C15, A0, A1 }
-#define MATRIX_COL_PINS { A9, C13, C14 }
-// To enable debugger set A13 A14 -> A5 A7
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
-#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
-
-/* Setting up 400KHz I2C Clock for a 48MHz system clock */
-#define I2C1_SCL_PAL_MODE 1
-#define I2C1_SDA_PAL_MODE 1
-#define I2C1_TIMINGR_SCLDEL 3U
-#define I2C1_TIMINGR_SDADEL 1U
-#define I2C1_TIMINGR_SCLH 3U
-#define I2C1_TIMINGR_SCLL 9U
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-#define WS2812_SPI SPID2 // default: SPID1
-#define WS2812_SPI_MOSI_PAL_MODE 0 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
-#define WS2812_SPI_SCK_PAL_MODE 0
-#define WS2812_SPI_SCK_PIN B13
-
-#define RGB_DI_PIN B15
-#ifdef RGB_DI_PIN
- #define RGBLED_NUM 10 /* If number is smaller, buffer updates too fast causing glitches */
- #define RGBLIGHT_HUE_STEP 8
- #define RGBLIGHT_SAT_STEP 8
- #define RGBLIGHT_VAL_STEP 8
- #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
- #define RGBLIGHT_ANIMATIONS
-#endif
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
-
-/* Backlight options */
-
-#define RGB_BACKLIGHT_ENABLED 1
-
-#define RGB_BACKLIGHT_NEBULA12
-
-// they aren't really used if RGB_BACKLIGHT_NEBULA65 defined
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
-
-// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
-#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
-
-// disable backlight after timeout in minutes, 0 = no timeout
-#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
-
-// the default brightness
-#define RGB_BACKLIGHT_BRIGHTNESS 255
-
-// the default effect (RGB test)
-#define RGB_BACKLIGHT_EFFECT 6
-
-// the default effect speed (0-3)
-#define RGB_BACKLIGHT_EFFECT_SPEED 0
-
-// the default color1 and color2
-#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
-#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
-
-#define DRIVER_COUNT 1
-#define DRIVER_LED_TOTAL 16
-
-// These define which keys in the matrix are alphas/mods
-// Used for backlight effects so colors are different for
-// alphas vs. mods
-// Each value is for a row, bit 0 is column 0
-// Alpha=0 Mod=1
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000000
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000000
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0000000000000000
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0000000000000000
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0000000000000000
-
-#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-
-// Backlight config starts after VIA's EEPROM usage,
-// dynamic keymaps start after this.
-#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
-
-// VIA lighting is handled by the keyboard-level code
-#define VIA_CUSTOM_LIGHTING_ENABLE
-#define VIA_QMK_RGBLIGHT_ENABLE