diff options
Diffstat (limited to 'keyboards/mechwild/puckbuddy/config.h')
| -rw-r--r-- | keyboards/mechwild/puckbuddy/config.h | 159 |
1 files changed, 159 insertions, 0 deletions
diff --git a/keyboards/mechwild/puckbuddy/config.h b/keyboards/mechwild/puckbuddy/config.h new file mode 100644 index 0000000000..fac68071bb --- /dev/null +++ b/keyboards/mechwild/puckbuddy/config.h @@ -0,0 +1,159 @@ +// Copyright 2022 Kyle McCreery (@kylemccreery) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6D77 // mw = "MechWild" +#define PRODUCT_ID 0x170F +#define DEVICE_VER 0x0100 +#define MANUFACTURER MechWild +#define PRODUCT PuckBuddy + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 + +#ifdef UF2_BUILD +#define EXTERNAL_EEPROM_BYTE_COUNT 2048 +#define EXTERNAL_EEPROM_PAGE_SIZE 128 +#define EXTERNAL_EEPROM_ADDRESS_SIZE 1 +#define EXTERNAL_EEPROM_WRITE_TIME 0 +#define FEE_PAGE_BASE_ADDRESS 0x08008000 +#endif + +/* Define custom font */ +#define OLED_FONT_H "keyboards/mechwild/puckbuddy/glcdfont.c" + +/* allows the "key" button on the blackpill to toggle caps lock for user testing before soldering */ +#define DIP_SWITCH_PINS { A0 } + +/* status light pins using the on board LED for the blackpill */ +#define LED_CAPS_LOCK_PIN C13 +#define LED_PIN_ON_STATE 0 + +/* set the tapping term for glidepoint pad to register a tap click */ +//#define CIRQUE_PINNACLE_TAPPING_TERM 0 // This is set to 0 to disable it + +/* TAPPING_TERM value is used for the CIRQUE_PINNACLE_TAPPING_TERM as well by default + * defining it this way allows us to easily modify it with DYNAMIC_TAPPING_TERM_ENABLE + */ +#define TAPPING_TERM 0 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B12, B13, B14, B15 } +#define MATRIX_COL_PINS { B10, A8, B4, B5 } +#define UNUSED_PINS + +/* spi config */ +#define SPI_DRIVER SPID1 +#define SPI_SCK_PIN A5 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN A7 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN A6 +#define SPI_MISO_PAL_MODE 5 +#define CIRQUE_PINNACLE_SPI_DIVISOR 8 +#define CIRQUE_PINNACLE_SPI_CS_PIN A4 + +/* encoder pins */ +#define ENCODERS_PAD_A { B1, B3 } +#define ENCODERS_PAD_B { B0, A15 } + +/* encoder resolution */ +#define ENCODER_RESOLUTION 4 +#define TAP_CODE_DELAY 10 + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* RGB settings, uncomment this define to enable RGB */ +#define RGB_DI_PIN A3 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 3 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 |