8 files changed, 22 insertions, 80 deletions
diff --git a/keyboards/mechwild/obe/config.h b/keyboards/mechwild/obe/config.h
index fd10cf4cbe..72efdae1e2 100644
--- a/keyboards/mechwild/obe/config.h
+++ b/keyboards/mechwild/obe/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 7
-#define MATRIX_COLS 10
 
 /*
  * Keyboard Matrix Assignments
@@ -36,21 +31,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { A8, B15, B14, B13, B12, A15, B3 }
 #define MATRIX_COL_PINS { B10, B1, B0, A7, A6, A5, A4, A3, A2, A1 }
 
-/* encoder pins */
-#define ENCODERS_PAD_A { B5 }
-#define ENCODERS_PAD_B { B4 }
-
-/* encoder resolution */
-#define ENCODER_RESOLUTION 4
 #define TAP_CODE_DELAY 10
 
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* status light pins */
-#define LED_NUM_LOCK_PIN B8
-#define LED_CAPS_LOCK_PIN B9
-
 /* RGB settings, uncomment this define to enable RGB */
 #define RGB_DI_PIN A0
 #ifdef RGB_DI_PIN
@@ -70,48 +55,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -127,7 +77,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 5
-#define BOOTMAGIC_LITE_COLUMN 4
diff --git a/keyboards/mechwild/obe/f401/eeprom/rules.mk b/keyboards/mechwild/obe/f401/eeprom/rules.mk
index 4707020e58..44adba039b 100644
--- a/keyboards/mechwild/obe/f401/eeprom/rules.mk
+++ b/keyboards/mechwild/obe/f401/eeprom/rules.mk
@@ -1,8 +1 @@
-# MCU name
-MCU = STM32F401
-BOARD = BLACKPILL_STM32_F401
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 EEPROM_DRIVER = i2c
diff --git a/keyboards/mechwild/obe/f401/info.json b/keyboards/mechwild/obe/f401/info.json
new file mode 100644
index 0000000000..acd7e83f77
--- /dev/null
+++ b/keyboards/mechwild/obe/f401/info.json
@@ -0,0 +1,5 @@
+{
+    "processor": "STM32F401",
+    "bootloader": "stm32-dfu",
+    "board": "BLACKPILL_STM32_F401"
+}
diff --git a/keyboards/mechwild/obe/f401/rules.mk b/keyboards/mechwild/obe/f401/rules.mk
index 1b21bbaf77..e69de29bb2 100644
--- a/keyboards/mechwild/obe/f401/rules.mk
+++ b/keyboards/mechwild/obe/f401/rules.mk
@@ -1,6 +0,0 @@
-# MCU name
-MCU = STM32F401
-BOARD = BLACKPILL_STM32_F401
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
diff --git a/keyboards/mechwild/obe/f411/eeprom/rules.mk b/keyboards/mechwild/obe/f411/eeprom/rules.mk
index 3d2f9bcf05..44adba039b 100644
--- a/keyboards/mechwild/obe/f411/eeprom/rules.mk
+++ b/keyboards/mechwild/obe/f411/eeprom/rules.mk
@@ -1,8 +1 @@
-# MCU name
-MCU = STM32F411
-BOARD = BLACKPILL_STM32_F411
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 EEPROM_DRIVER = i2c
diff --git a/keyboards/mechwild/obe/f411/info.json b/keyboards/mechwild/obe/f411/info.json
new file mode 100644
index 0000000000..2517a82403
--- /dev/null
+++ b/keyboards/mechwild/obe/f411/info.json
@@ -0,0 +1,5 @@
+{
+    "processor": "STM32F411",
+    "bootloader": "stm32-dfu",
+    "board": "BLACKPILL_STM32_F411"
+}
diff --git a/keyboards/mechwild/obe/f411/rules.mk b/keyboards/mechwild/obe/f411/rules.mk
index c25a64f4b3..e69de29bb2 100644
--- a/keyboards/mechwild/obe/f411/rules.mk
+++ b/keyboards/mechwild/obe/f411/rules.mk
@@ -1,6 +0,0 @@
-# MCU name
-MCU = STM32F411
-BOARD = BLACKPILL_STM32_F411
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
diff --git a/keyboards/mechwild/obe/info.json b/keyboards/mechwild/obe/info.json
index fbae09e15c..cbe9f7cfa8 100644
--- a/keyboards/mechwild/obe/info.json
+++ b/keyboards/mechwild/obe/info.json
@@ -8,6 +8,18 @@
         "pid": "0x1707",
         "device_version": "2.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B5", "pin_b": "B4"}
+        ]
+    },
+    "indicators": {
+        "caps_lock": "B9",
+        "num_lock": "B8"
+    },
+    "bootmagic": {
+        "matrix": [5, 4]
+    },
     "layouts": {
         "LAYOUT": {
             "layout": [