diff options
Diffstat (limited to 'keyboards/mechlovin')
57 files changed, 309 insertions, 100 deletions
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev1/config.h b/keyboards/mechlovin/adelais/rgb_led/rev1/config.h index 1ba7d27dff..d75cbd3f2a 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev1/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev1/config.h @@ -13,7 +13,7 @@ #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 220 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 -#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
\ No newline at end of file +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h index 38ffdd40ae..c830edce26 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h @@ -1,7 +1,7 @@ #pragma once #define PRODUCT_ID 0xAEC2 -#define PRODUCT Adelais En Ciel Rev2 +#define PRODUCT Adelais En Ciel Rev2 #define MATRIX_ROW_PINS { B1, A0, C13, A1, A2} #define MATRIX_COL_PINS { A10, A9, A8, B15, B14, B13, B12, B11, B10, B8, B4, B5, B3, C14, A7 } @@ -31,7 +31,7 @@ #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set @@ -42,4 +42,4 @@ #define ENCODERS_PAD_B { A3 } #define ENCODER_RESOLUTION 4 -#define TAP_CODE_DELAY 10
\ No newline at end of file +#define TAP_CODE_DELAY 10 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c index 5087174b96..fe946169a7 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c @@ -17,7 +17,7 @@ #include "adelais.h" #ifdef RGB_MATRIX_ENABLE -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { {0, C2_1, C3_1, C4_1}, //D102-A0-0 {0, C5_1, C6_1, C7_1}, //D108-A1-1 diff --git a/keyboards/mechlovin/adelais/rules.mk b/keyboards/mechlovin/adelais/rules.mk index 73e90befbe..93f28c8296 100644 --- a/keyboards/mechlovin/adelais/rules.mk +++ b/keyboards/mechlovin/adelais/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug @@ -17,7 +17,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/mechlovin/delphine/rgb_led/config.h b/keyboards/mechlovin/delphine/rgb_led/config.h index 4d5c853d0c..9a653d7595 100644 --- a/keyboards/mechlovin/delphine/rgb_led/config.h +++ b/keyboards/mechlovin/delphine/rgb_led/config.h @@ -24,7 +24,7 @@ // #define RGBLIGHT_EFFECT_RGB_TEST // #define RGBLIGHT_EFFECT_ALTERNATING #endif - + //rgb matrix setting// This is a 7-bit address, that gets left-shifted and bit 0 // set to 0 for write, 1 for read (as per I2C protocol) // The address will vary depending on your wiring: @@ -41,7 +41,7 @@ #define RGB_MATRIX_KEYPRESSES // reacts to keypresses #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set diff --git a/keyboards/mechlovin/delphine/rgb_led/rgb_led.c b/keyboards/mechlovin/delphine/rgb_led/rgb_led.c index 6f3e3ec731..29b6d1f783 100644 --- a/keyboards/mechlovin/delphine/rgb_led/rgb_led.c +++ b/keyboards/mechlovin/delphine/rgb_led/rgb_led.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { // left CA {0, C5_2, C6_2, C7_2}, //D2-0 {0, C1_1, C3_2, C4_2}, //D20-1 diff --git a/keyboards/mechlovin/delphine/rules.mk b/keyboards/mechlovin/delphine/rules.mk index 217bb758b2..544692ae08 100644 --- a/keyboards/mechlovin/delphine/rules.mk +++ b/keyboards/mechlovin/delphine/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/hannah60rgb/rev1/config.h b/keyboards/mechlovin/hannah60rgb/rev1/config.h index 20873e7161..fd45ecca6c 100644 --- a/keyboards/mechlovin/hannah60rgb/rev1/config.h +++ b/keyboards/mechlovin/hannah60rgb/rev1/config.h @@ -11,8 +11,8 @@ # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) # define RGB_MATRIX_FRAMEBUFFER_EFFECTS # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -# define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +// # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set -#endif
\ No newline at end of file +#endif diff --git a/keyboards/mechlovin/hannah60rgb/rev1/rev1.c b/keyboards/mechlovin/hannah60rgb/rev1/rev1.c index 5acea8c665..6b1b8604a2 100644 --- a/keyboards/mechlovin/hannah60rgb/rev1/rev1.c +++ b/keyboards/mechlovin/hannah60rgb/rev1/rev1.c @@ -16,13 +16,6 @@ #include "hannah60rgb.h" -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -}; - #ifdef RGB_MATRIX_ENABLE led_config_t g_led_config = { { //Key Matrix to LED Index diff --git a/keyboards/mechlovin/hannah60rgb/rev2/config.h b/keyboards/mechlovin/hannah60rgb/rev2/config.h index 2bcffbc856..5e57f985d3 100644 --- a/keyboards/mechlovin/hannah60rgb/rev2/config.h +++ b/keyboards/mechlovin/hannah60rgb/rev2/config.h @@ -30,11 +30,11 @@ #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set #if defined(RGBLIGHT_ENABLE) && defined(RGB_MATRIX_ENABLE) # define RGB_MATRIX_DISABLE_KEYCODES -#endif
\ No newline at end of file +#endif diff --git a/keyboards/mechlovin/hannah60rgb/rev2/rev2.c b/keyboards/mechlovin/hannah60rgb/rev2/rev2.c index 05469a1bbe..8b30538cc2 100644 --- a/keyboards/mechlovin/hannah60rgb/rev2/rev2.c +++ b/keyboards/mechlovin/hannah60rgb/rev2/rev2.c @@ -17,7 +17,7 @@ #include "rev2.h" #ifdef RGB_MATRIX_ENABLE -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/mechlovin/hannah60rgb/rules.mk b/keyboards/mechlovin/hannah60rgb/rules.mk index 3d11b3c9ab..8932715ec1 100644 --- a/keyboards/mechlovin/hannah60rgb/rules.mk +++ b/keyboards/mechlovin/hannah60rgb/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/mechlovin/hannah65/hannah65.h b/keyboards/mechlovin/hannah65/hannah65.h index 576a78510d..99da5a2a1a 100644 --- a/keyboards/mechlovin/hannah65/hannah65.h +++ b/keyboards/mechlovin/hannah65/hannah65.h @@ -20,6 +20,4 @@ #if defined(KEYBOARD_mechlovin_hannah65_rev1) # include "rev1.h" -#elif defined(KEYBOARD_mechlovin_hannah65_mechlovin9) -# include "mechlovin9.h" #endif
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah65/mechlovin9/config.h b/keyboards/mechlovin/hannah65/mechlovin9/config.h deleted file mode 100644 index 68097bd623..0000000000 --- a/keyboards/mechlovin/hannah65/mechlovin9/config.h +++ /dev/null @@ -1,5 +0,0 @@ -#pragma once - -#define PRODUCT_ID 0x6509 -#define DEVICE_VER 0x0001 -#define PRODUCTION Mechlovin9
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah65/rev1/config.h b/keyboards/mechlovin/hannah65/rev1/config.h deleted file mode 100644 index 8d90908c20..0000000000 --- a/keyboards/mechlovin/hannah65/rev1/config.h +++ /dev/null @@ -1,5 +0,0 @@ -#pragma once - -#define PRODUCT_ID 0x6500 -#define DEVICE_VER 0x0001 -#define PRODUCTION Hannah65
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah65/rev1/haus/config.h b/keyboards/mechlovin/hannah65/rev1/haus/config.h new file mode 100644 index 0000000000..4d517ef475 --- /dev/null +++ b/keyboards/mechlovin/hannah65/rev1/haus/config.h @@ -0,0 +1,22 @@ +/* +Copyright 2021 Mechlovin' Studio + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define PRODUCT_ID 0x6500 +#define DEVICE_VER 0x0001 +#define PRODUCTION Haus Rev. 1
\ No newline at end of file diff --git a/keyboards/mechlovin/hannah65/rev1/haus/readme.md b/keyboards/mechlovin/hannah65/rev1/haus/readme.md new file mode 100644 index 0000000000..5f937bf20d --- /dev/null +++ b/keyboards/mechlovin/hannah65/rev1/haus/readme.md @@ -0,0 +1,23 @@ +# Haus + + + +A Haus PCB, Rev.1 + +* Keyboard Maintainer: [Hand Engineering](https://www.reddit.com/r/MechanicalKeyboards/comments/hzcavx/haus_by_hand_engineering/) +* Hardware Supported: Haus PCB rev.1, STM32F303. +* Hardware Availability: Haus Keyboard. + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/hannah65/rev1/haus:default + +Flashing example for this keyboard: + + make mechlovin/hannah65/rev1/haus:flash + + + +**Reset Key:** To put the Haus PCB into bootloader, push reset swith on the bottom of the PCB. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechlovin/hannah65/mechlovin9/rules.mk b/keyboards/mechlovin/hannah65/rev1/haus/rules.mk index e69de29bb2..e69de29bb2 100644 --- a/keyboards/mechlovin/hannah65/mechlovin9/rules.mk +++ b/keyboards/mechlovin/hannah65/rev1/haus/rules.mk diff --git a/keyboards/mechlovin/hannah65/rev1/readme.md b/keyboards/mechlovin/hannah65/rev1/readme.md new file mode 100644 index 0000000000..d8179f56fd --- /dev/null +++ b/keyboards/mechlovin/hannah65/rev1/readme.md @@ -0,0 +1,19 @@ +# hannah65 rev1 + + + +A 65% PCB, compatible with E6.5, Kyuu,... + +* Keyboard Maintainer: [Team Mechlovin](https://github.com/mechlovin) +* Hardware Supported: Hannah65, STM32F303 +* Hardware Availability: [Mechlovin Store](https://mechlovin.studio) + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/hannah65/rev1:default + +Flashing example for this keyboard: + + make mechlovin/hannah65/rev1:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechlovin/hannah65/rev1/rules.mk b/keyboards/mechlovin/hannah65/rev1/rules.mk index e69de29bb2..ae9bc176a4 100644 --- a/keyboards/mechlovin/hannah65/rev1/rules.mk +++ b/keyboards/mechlovin/hannah65/rev1/rules.mk @@ -0,0 +1 @@ +DEFAULT_FOLDER = mechlovin/hannah65/rev1/haus diff --git a/keyboards/mechlovin/hannah65/rules.mk b/keyboards/mechlovin/hannah65/rules.mk index 656722353c..fabf13249e 100644 --- a/keyboards/mechlovin/hannah65/rules.mk +++ b/keyboards/mechlovin/hannah65/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug @@ -22,4 +22,4 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -DEFAULT_FOLDER = mechlovin/hannah65/rev1 +DEFAULT_FOLDER = mechlovin/hannah65/rev1/haus diff --git a/keyboards/mechlovin/hannah910/config.h b/keyboards/mechlovin/hannah910/config.h index 56f3c97aeb..b4edaae481 100644 --- a/keyboards/mechlovin/hannah910/config.h +++ b/keyboards/mechlovin/hannah910/config.h @@ -162,26 +162,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION -/* - * MIDI options - */ - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/mechlovin/hannah910/hannah910.c b/keyboards/mechlovin/hannah910/hannah910.c index 2c696ab564..3237636be2 100644 --- a/keyboards/mechlovin/hannah910/hannah910.c +++ b/keyboards/mechlovin/hannah910/hannah910.c @@ -15,10 +15,6 @@ */ #include "hannah910.h" -void matrix_init_kb(void) { - matrix_init_user(); - led_init_ports(); -}; void led_init_ports(void) { setPinOutput(B2); setPinOutput(D0); @@ -35,7 +31,7 @@ void led_set_kb(uint8_t usb_led) { led_set_user(usb_led); } -uint32_t layer_state_set_user(uint32_t state) +layer_state_t layer_state_set_user(layer_state_t state) { // if on layer 1, turn on D2 LED, otherwise off. if (biton32(state) == 1) { diff --git a/keyboards/mechlovin/hannah910/rev1/rules.mk b/keyboards/mechlovin/hannah910/rev1/rules.mk index d000eafc62..90bd2b3a68 100644 --- a/keyboards/mechlovin/hannah910/rev1/rules.mk +++ b/keyboards/mechlovin/hannah910/rev1/rules.mk @@ -14,7 +14,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug @@ -25,7 +25,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/mechlovin/hannah910/rev2/rules.mk b/keyboards/mechlovin/hannah910/rev2/rules.mk index f66b6105db..2e07f6af38 100644 --- a/keyboards/mechlovin/hannah910/rev2/rules.mk +++ b/keyboards/mechlovin/hannah910/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/hannah910/rev3/rules.mk b/keyboards/mechlovin/hannah910/rev3/rules.mk index a8100762d3..d37beeba30 100644 --- a/keyboards/mechlovin/hannah910/rev3/rules.mk +++ b/keyboards/mechlovin/hannah910/rev3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/hex6c/rules.mk b/keyboards/mechlovin/hex6c/rules.mk index 0af4a07f70..f132e401e8 100644 --- a/keyboards/mechlovin/hex6c/rules.mk +++ b/keyboards/mechlovin/hex6c/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/mechlovin/infinity87/rev2/rev2.c b/keyboards/mechlovin/infinity87/rev2/rev2.c index 5a92f8bec6..dfaa27d036 100644 --- a/keyboards/mechlovin/infinity87/rev2/rev2.c +++ b/keyboards/mechlovin/infinity87/rev2/rev2.c @@ -16,10 +16,6 @@ #include "rev2.h" -void matrix_init_kb(void) { - matrix_init_user(); - led_init_ports(); -}; void led_init_ports(void) { setPinOutput(A5); setPinOutput(A6); diff --git a/keyboards/mechlovin/infinity87/rgb_rev1/config.h b/keyboards/mechlovin/infinity87/rgb_rev1/config.h index 0c16c684cf..76c6e0db73 100644 --- a/keyboards/mechlovin/infinity87/rgb_rev1/config.h +++ b/keyboards/mechlovin/infinity87/rgb_rev1/config.h @@ -35,7 +35,7 @@ // 0b0110001 AD <-> SCL // 0b0110010 AD <-> SDA #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES #define DISABLE_RGB_MATRIX_SPLASH #define DISABLE_RGB_MATRIX_MULTISPLASH diff --git a/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c b/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c index f13fee8add..bd1fd8abf7 100644 --- a/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c +++ b/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c @@ -17,7 +17,7 @@ #include "rgb_rev1.h" #ifdef RGB_MATRIX_ENABLE -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS34_SW1, CS35_SW1, CS36_SW1}, //D92-K00-0 {0, CS37_SW1, CS38_SW1, CS39_SW1}, //D94-K01-1 {0, CS31_SW1, CS32_SW1, CS33_SW1}, //D96-K02-2 diff --git a/keyboards/mechlovin/infinity87/rules.mk b/keyboards/mechlovin/infinity87/rules.mk index e0858aff0f..b33faea426 100644 --- a/keyboards/mechlovin/infinity87/rules.mk +++ b/keyboards/mechlovin/infinity87/rules.mk @@ -2,7 +2,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/mechlovin/infinity88/rules.mk b/keyboards/mechlovin/infinity88/rules.mk index 85c01d52bf..7cc6adb50f 100644 --- a/keyboards/mechlovin/infinity88/rules.mk +++ b/keyboards/mechlovin/infinity88/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/mechlovin/infinityce/infinityce.c b/keyboards/mechlovin/infinityce/infinityce.c index 5d75b480b3..84eaf0b7ee 100644 --- a/keyboards/mechlovin/infinityce/infinityce.c +++ b/keyboards/mechlovin/infinityce/infinityce.c @@ -16,13 +16,6 @@ #include "infinityce.h" -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -}; - void led_init_ports(void) { // * Set our LED pins as output setPinOutput(B3); diff --git a/keyboards/mechlovin/infinityce/rules.mk b/keyboards/mechlovin/infinityce/rules.mk index 8a5bd6b42c..41d22b66a6 100644 --- a/keyboards/mechlovin/infinityce/rules.mk +++ b/keyboards/mechlovin/infinityce/rules.mk @@ -14,7 +14,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug @@ -25,6 +25,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/mechlovin/kanu/kanu.c b/keyboards/mechlovin/kanu/kanu.c index d19b7f1031..ceb874e124 100644 --- a/keyboards/mechlovin/kanu/kanu.c +++ b/keyboards/mechlovin/kanu/kanu.c @@ -16,10 +16,6 @@ #include "kanu.h" -void matrix_init_kb(void) { - matrix_init_user(); - led_init_ports(); -}; void led_init_ports(void) { setPinOutput(B2); setPinOutput(D0); diff --git a/keyboards/mechlovin/kanu/rules.mk b/keyboards/mechlovin/kanu/rules.mk index 2c7cbc4aed..3ef22068a8 100644 --- a/keyboards/mechlovin/kanu/rules.mk +++ b/keyboards/mechlovin/kanu/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/mechlovin9/config.h b/keyboards/mechlovin/mechlovin9/config.h new file mode 100644 index 0000000000..669d79ac91 --- /dev/null +++ b/keyboards/mechlovin/mechlovin9/config.h @@ -0,0 +1,30 @@ + +/* +Copyright 2021 Mechlovin' Studio + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4D4C +#define MANUFACTURER Mechlovin Studio + +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +#define DIODE_DIRECTION COL2ROW +#define BACKLIGHT_LEVELS 3 diff --git a/keyboards/mechlovin/hannah65/mechlovin9/info.json b/keyboards/mechlovin/mechlovin9/info.json index 24585920a2..24585920a2 100644 --- a/keyboards/mechlovin/hannah65/mechlovin9/info.json +++ b/keyboards/mechlovin/mechlovin9/info.json diff --git a/keyboards/mechlovin/hannah65/mechlovin9/keymaps/default/keymap.c b/keyboards/mechlovin/mechlovin9/keymaps/default/keymap.c index 97a2c80723..97a2c80723 100644 --- a/keyboards/mechlovin/hannah65/mechlovin9/keymaps/default/keymap.c +++ b/keyboards/mechlovin/mechlovin9/keymaps/default/keymap.c diff --git a/keyboards/mechlovin/hannah65/mechlovin9/keymaps/default/readme.md b/keyboards/mechlovin/mechlovin9/keymaps/default/readme.md index 324467b059..324467b059 100644 --- a/keyboards/mechlovin/hannah65/mechlovin9/keymaps/default/readme.md +++ b/keyboards/mechlovin/mechlovin9/keymaps/default/readme.md diff --git a/keyboards/mechlovin/hannah65/mechlovin9/keymaps/via/keymap.c b/keyboards/mechlovin/mechlovin9/keymaps/via/keymap.c index 0fae908c24..0fae908c24 100644 --- a/keyboards/mechlovin/hannah65/mechlovin9/keymaps/via/keymap.c +++ b/keyboards/mechlovin/mechlovin9/keymaps/via/keymap.c diff --git a/keyboards/mechlovin/hannah65/mechlovin9/keymaps/via/rules.mk b/keyboards/mechlovin/mechlovin9/keymaps/via/rules.mk index 036bd6d1c3..036bd6d1c3 100644 --- a/keyboards/mechlovin/hannah65/mechlovin9/keymaps/via/rules.mk +++ b/keyboards/mechlovin/mechlovin9/keymaps/via/rules.mk diff --git a/keyboards/mechlovin/mechlovin9/mechlovin9.c b/keyboards/mechlovin/mechlovin9/mechlovin9.c new file mode 100644 index 0000000000..a5a8b6c0fe --- /dev/null +++ b/keyboards/mechlovin/mechlovin9/mechlovin9.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Mechlovin' Studio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "mechlovin9.h" diff --git a/keyboards/mechlovin/hannah65/mechlovin9/mechlovin9.h b/keyboards/mechlovin/mechlovin9/mechlovin9.h index 4aebaad0f3..c7d65e05f4 100644 --- a/keyboards/mechlovin/hannah65/mechlovin9/mechlovin9.h +++ b/keyboards/mechlovin/mechlovin9/mechlovin9.h @@ -1,4 +1,4 @@ -/* Copyright 2020 Team Mechlovin +/* Copyright 2021 Mechlovin' Studio * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/mechlovin/hannah65/mechlovin9/readme.md b/keyboards/mechlovin/mechlovin9/readme.md index aa6bdc1cad..55dead19c4 100644 --- a/keyboards/mechlovin/hannah65/mechlovin9/readme.md +++ b/keyboards/mechlovin/mechlovin9/readme.md @@ -10,6 +10,8 @@ A 65% PCB, compatible with Kyuu. Make example for this keyboard (after setting up your build environment): - make mechlovin/hannah65/mechlovin9:default + make mechlovin/mechlovin9/rev1:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +**Reset Key:** To put the mechlovin9 PCB into bootloader, hold ESC and plug cable.
\ No newline at end of file diff --git a/keyboards/mechlovin/mechlovin9/rev1/config.h b/keyboards/mechlovin/mechlovin9/rev1/config.h new file mode 100644 index 0000000000..2a9c335d73 --- /dev/null +++ b/keyboards/mechlovin/mechlovin9/rev1/config.h @@ -0,0 +1,42 @@ +/* +Copyright 2021 Mechlovin' Studio + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define PRODUCT_ID 0x6509 +#define DEVICE_VER 0x0001 +#define PRODUCT Mechlovin9 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { A4, A5, A3, A2, A1 } +#define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, A6, A0, C15, B4, B5, B3, C13, C14, A13 } + +#define LED_CAPS_LOCK_PIN B9 + +#define BACKLIGHT_PIN B8 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_PWM_DRIVER PWMD3 +#define BACKLIGHT_PWM_CHANNEL 3
\ No newline at end of file diff --git a/keyboards/mechlovin/mechlovin9/rev1/readme.md b/keyboards/mechlovin/mechlovin9/rev1/readme.md new file mode 100644 index 0000000000..55dead19c4 --- /dev/null +++ b/keyboards/mechlovin/mechlovin9/rev1/readme.md @@ -0,0 +1,17 @@ +# mechlovin9 + + + +A 65% PCB, compatible with Kyuu. + +* Keyboard Maintainer: [Team Mechlovin](https://github.com/mechlovin) +* Hardware Supported: Kyuu Keyboard. +* Hardware Availability: [Reddit GB](https://www.reddit.com/r/mechmarket/comments/i61par/gb_mechlovin_9_a_kyuu_65_keyboard_compatible_pcb/) + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/mechlovin9/rev1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +**Reset Key:** To put the mechlovin9 PCB into bootloader, hold ESC and plug cable.
\ No newline at end of file diff --git a/keyboards/mechlovin/mechlovin9/rev1/rules.mk b/keyboards/mechlovin/mechlovin9/rev1/rules.mk new file mode 100644 index 0000000000..38261a4f06 --- /dev/null +++ b/keyboards/mechlovin/mechlovin9/rev1/rules.mk @@ -0,0 +1,10 @@ +# MCU name +MCU = STM32F303 +BOARD = QMK_PROTON_C + +# Build Options +# change yes to no to disable +# +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover diff --git a/keyboards/mechlovin/mechlovin9/rev2/config.h b/keyboards/mechlovin/mechlovin9/rev2/config.h new file mode 100644 index 0000000000..ed11fafa83 --- /dev/null +++ b/keyboards/mechlovin/mechlovin9/rev2/config.h @@ -0,0 +1,44 @@ +/* +Copyright 2020 Team Mechlovin' + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define PRODUCT_ID 0x6509 +#define DEVICE_VER 0x0002 +#define PRODUCT Mechlovin9 Rev2 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { A0, A1, A2, A3, A4 } +#define MATRIX_COL_PINS { B2, B1, B0, B3, B4, B5, D0, D1, D5, D6, D7, C0, C3, C2, C1 } + +#define LED_CAPS_LOCK_PIN A7 + +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_BREATHING + +/* Bootmagic Lite key configuration */ + #define BOOTMAGIC_LITE_ROW 0 + #define BOOTMAGIC_LITE_COLUMN 13 diff --git a/keyboards/mechlovin/mechlovin9/rev2/readme.md b/keyboards/mechlovin/mechlovin9/rev2/readme.md new file mode 100644 index 0000000000..55dead19c4 --- /dev/null +++ b/keyboards/mechlovin/mechlovin9/rev2/readme.md @@ -0,0 +1,17 @@ +# mechlovin9 + + + +A 65% PCB, compatible with Kyuu. + +* Keyboard Maintainer: [Team Mechlovin](https://github.com/mechlovin) +* Hardware Supported: Kyuu Keyboard. +* Hardware Availability: [Reddit GB](https://www.reddit.com/r/mechmarket/comments/i61par/gb_mechlovin_9_a_kyuu_65_keyboard_compatible_pcb/) + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/mechlovin9/rev1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +**Reset Key:** To put the mechlovin9 PCB into bootloader, hold ESC and plug cable.
\ No newline at end of file diff --git a/keyboards/mechlovin/mechlovin9/rev2/rules.mk b/keyboards/mechlovin/mechlovin9/rev2/rules.mk new file mode 100644 index 0000000000..77a26616fb --- /dev/null +++ b/keyboards/mechlovin/mechlovin9/rev2/rules.mk @@ -0,0 +1,9 @@ +# MCU name +MCU = atmega32a + +# Processor frequency +F_CPU = 16000000 + +# Bootloader selection +BOOTLOADER = bootloadHID + diff --git a/keyboards/mechlovin/mechlovin9/rules.mk b/keyboards/mechlovin/mechlovin9/rules.mk new file mode 100644 index 0000000000..8b16113e87 --- /dev/null +++ b/keyboards/mechlovin/mechlovin9/rules.mk @@ -0,0 +1,18 @@ +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +DEFAULT_FOLDER = mechlovin/mechlovin9/rev1
\ No newline at end of file diff --git a/keyboards/mechlovin/pisces/rules.mk b/keyboards/mechlovin/pisces/rules.mk index 25f6c2b8b7..acbf5c7b13 100644 --- a/keyboards/mechlovin/pisces/rules.mk +++ b/keyboards/mechlovin/pisces/rules.mk @@ -14,7 +14,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug @@ -25,6 +25,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/mechlovin/serratus/rules.mk b/keyboards/mechlovin/serratus/rules.mk index fed40192ed..4d4f1fdae5 100644 --- a/keyboards/mechlovin/serratus/rules.mk +++ b/keyboards/mechlovin/serratus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/th1800/rules.mk b/keyboards/mechlovin/th1800/rules.mk index 3076166479..bbf233bd4f 100644 --- a/keyboards/mechlovin/th1800/rules.mk +++ b/keyboards/mechlovin/th1800/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = USBasp # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/tmkl/config.h b/keyboards/mechlovin/tmkl/config.h index e36470a9bd..9a1d865e29 100644 --- a/keyboards/mechlovin/tmkl/config.h +++ b/keyboards/mechlovin/tmkl/config.h @@ -40,7 +40,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ -#define MATRIX_ROW_PINS { A8, A4, A5, A3, A2, A1, } +#define MATRIX_ROW_PINS { A8, A4, A5, A3, A2, A1 } #define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, A6, A0, C15, B4, B5, B3, C13, C14 } #define DIODE_DIRECTION COL2ROW @@ -58,4 +58,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define LED_CAPS_LOCK_PIN B9 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE
\ No newline at end of file +#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/mechlovin/tmkl/rules.mk b/keyboards/mechlovin/tmkl/rules.mk index 54a646d274..65048eb7ec 100644 --- a/keyboards/mechlovin/tmkl/rules.mk +++ b/keyboards/mechlovin/tmkl/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug |