summaryrefslogtreecommitdiff
path: root/keyboards/massdrop/ctrl/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/massdrop/ctrl/config.h')
-rw-r--r--keyboards/massdrop/ctrl/config.h126
1 files changed, 126 insertions, 0 deletions
diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h
new file mode 100644
index 0000000000..31eccda87d
--- /dev/null
+++ b/keyboards/massdrop/ctrl/config.h
@@ -0,0 +1,126 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x04D8
+#define PRODUCT_ID 0xEED2
+#define DEVICE_VER 0x0101
+
+#define MANUFACTURER "Massdrop Inc."
+#define PRODUCT "CTRL Keyboard"
+#define SERIAL_NUM "Unavailable"
+
+/* key matrix size */
+#define MATRIX_ROWS 11
+#define MATRIX_COLS 8
+
+/* MCU Port name definitions */
+#define PA 0
+#define PB 1
+
+/* Port and Pin definition of key row hardware configuration */
+#define MATRIX_ROW_PORTS PB, PB, PB, PB, PB, PB, PA, PA, PB, PB, PB
+#define MATRIX_ROW_PINS 4, 5, 6, 7, 8, 9, 10, 11, 10, 11, 12
+
+/* Port and Pin definition of key column hardware configuration */
+#define MATRIX_COL_PORTS PA, PA, PA, PA, PA, PA, PA, PA
+#define MATRIX_COL_PINS 0, 1, 2, 3, 4, 5, 6, 7
+
+/* This Shift Register expands available hardware output lines to control additional peripherals */
+/* It uses four lines from the MCU to provide 16 output lines */
+/* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */
+#define SR_EXP_RCLK_PORT PB
+#define SR_EXP_RCLK_PIN 14
+/* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */
+#define SR_EXP_OE_N_PORT PB
+#define SR_EXP_OE_N_PIN 15
+/* SERCOM port to use for Shift Register SPI */
+/* DATAOUT and SCLK must be configured to use hardware pins of this port */
+#define SR_EXP_SERCOM SERCOM2
+/* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */
+#define SR_EXP_DATAOUT_PORT PA
+#define SR_EXP_DATAOUT_PIN 12
+#define SR_EXP_DATAOUT_MUX 2
+/* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */
+#define SR_EXP_SCLK_PORT PA
+#define SR_EXP_SCLK_PIN 13
+#define SR_EXP_SCLK_MUX 2
+
+/* Debug LED (Small LED Located near MCU) */
+#define DEBUG_LED_ENABLE 1
+#define DEBUG_LED_PORT PA
+#define DEBUG_LED_PIN 27
+
+/* Additional debugging ports */
+/* PCB M21 */
+#define DEBUG_PORT1_ENABLE 1
+#define DEBUG_PORT1_PORT PB
+#define DEBUG_PORT1_PIN 3
+/* PCB M23 */
+#define DEBUG_PORT2_ENABLE 1
+#define DEBUG_PORT2_PORT PB
+#define DEBUG_PORT2_PIN 17
+/* PCB M25 */
+#define DEBUG_PORT3_ENABLE 1
+#define DEBUG_PORT3_PORT PA
+#define DEBUG_PORT3_PIN 20
+
+/* Debug Boot Tracing - During boot sequence, ground this pin to halt and display debug code using Debug LED */
+/* This is useful in determining which hardware device may have malfunctioned or is improperly configured */
+/* Feature is automatically disabled after successful boot */
+/* PCB M27 */
+#define DEBUG_BOOT_TRACING_ENABLE 1
+#define DEBUG_BOOT_TRACING_PORT PB
+#define DEBUG_BOOT_TRACING_PIN 23
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Force boot in NKRO mode */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION